The use of acrylic to compare the abrasivitand stain removal properties of toothpastes

The Impact on Dental Staining Caused by Beverages in Combination with Chlorhexidine Digluconate

OBJECTIVES

 There are several hypotheses regarding how chlorhexidine (CHX) digluconate causes staining with the role of beverages, specifically the precipitation of anionic dietary chromogens onto adsorbed cations, the most probable cause. The aim of this study was to investigate and compare the staining potential of common beverages using an in vitro staining and brushing model to better understand the interactions between chromogens from different beverage categories and the teeth.

MATERIALS AND METHODS

 Human enamel samples were exposed to a cyclic treatment of artificial saliva and 0.2% CHX mouthwash combined with a range of beverages, with and without brushing, simulating a period equivalent to 2 weeks. Eleven beverages were tested: diet coke, diet lemonade, white wine, red wine, lager beer, black tea, coffee, black tea with milk, coffee with milk, ginger and lemon infusion, and water. Toothbrushing was performed in a brushing simulator with toothpaste and also with water. Colorimetric differences were determined by ΔE using a VITA Easyshade dental spectrophotometer. Statistical analyses were performed by one-way analysis of variance with post hoc Tukey's honestly significant difference test and Levene's test.

RESULTS

 Black tea and red wine produced highest staining, which agrees with the literature. Significant staining was also observed for a ginger and lemon infusion, coffee, coffee with milk, tea with milk, and lager beer compared with water (p < 0.05). The staining potential of diet coke in combination with brushing appeared to be connected to its low pH. Both white wine and diet lemonade produced stain comparable to the water control. After treatment with high staining beverages, scanning electron microscope evaluation confirmed the formation of a surface layer. The mechanical resistance of the stain differed depending on the beverage, black tea stain was the most resistant. The addition of milk to tea and coffee considerably modified the stain layer and the adhesion to the tooth surface.

CONCLUSION

 The data may help demonstrate that appropriate user guidance can avoid stain and in turn help improve user compliance during short-term use of this gold standard antimicrobial treatment.

An in vitro screening assay for dental stain cleaning

BACKGROUND

The present study aimed to develop an in vitro model for stain removal from natural enamel for the assessment and comparison of oral hygiene products.

METHODS

Bovine teeth (n = 8 per group) were ground/polished to provide flat enamel specimens and ferric-tannate deposits were precipitated onto the enamel surfaces. The ferric-tannate stained enamel specimens were brushed using an in vitro tooth-brushing simulator with slurries containing commercially available toothpaste products, dental abrasive particles, and sodium tripolyphosphate (STP) solutions of different concentrations. The colour of the enamel surfaces was measured using a spectrophotometer before and after stain application as well as after the brushing treatments.

RESULTS

Differences in stain removal efficacy were found between the toothpastes categorised as whitening and non-whitening comprising of different types of dental abrasives (hydrated silica and alumina). A mean value of 27% for stain removal was detected for the three non-whitening toothpastes and 59% of stain removal was detected for the three whitening toothpastes after 1000 strokes. Compared with the slurry with Zeodent 113 abrasive alone, the addition of STP provided better performance for stain removal under the same brushing conditions (mean value of 62% for Zeodent 113 abrasive alone and 72% with the addition of 5% (w/w) STP after 1000 strokes). No difference was evident between the STP concentration of 5% (w/w) and 10% (w/w).

CONCLUSIONS

The ferric-tannate/bovine enamel model reported here provides good stain retention, is rapidly and easily prepared, and is shown to be progressively and reproducibly sensitive to toothbrushing using different toothpastes and surfactant/chelating agent solutions. Importantly, it provides good discrimination between various oral hygiene products. The stain removal assay reported here has considerable potential to enable comparative assessments of different toothpaste types in terms of their cleaning capabilities.

The use of a profilometer for both quantitative and qualitative measurements of toothpaste abrasivity

AIM

To evaluate the abrasivity of different toothpastes both quantitatively and qualitatively with a profilometer technique and to correlate these findings to the radioactive dentin abrasivity (RDA) value.

MATERIALS AND METHODS

Acrylic plates were exposed to brushing in a brushing machine with 11 different toothpastes. The results were evaluated using a profilometer. A surface roughness value (Ra-value), that is, a qualitative measurement, and also a volume value, that is, a quantitative measurement, were calculated from the profilometer results. These values were then correlated to each other and to the RDA-value. A comparison between RDA, Ra and volume measurements was performed using linear fitting procedure.

RESULTS

The results showed that the correlation between RDA and Ra measurements was low (R(2) = 0.04) and also that the correlation between RDA and volume measurements was low (R(2) = 0.00002). Correlation between Ra and abraded volume was high (R(2) = 0.87).

CONCLUSIONS

It is important to consider not only the RDA-value when evaluating toothpaste abrasivity. From the profilometer results both a quantitative (volume) and qualitative (roughness) measurement of the abrasivity of a toothpaste can be obtained.

Whitening toothpastes: a review of the literature

OBJECTIVES

To review and summarise the whitening agents contained within tooth whitening toothpaste formulations, their mode of action in tooth whitening, and the in vitro and clinical methods used to evaluate and demonstrate their efficacy.

METHODS

Original scientific full papers or reviews listed in ISI Web of Science and Medline were included in this review using the search terms white*, toothpaste and dentifrice.

CONCLUSIONS

Due to the reported consumer and patient dissatisfaction with their perceived tooth color, toothpaste manufacturers have responded by developing a vast array of contemporary whitening toothpastes. One of the key functional ingredients in whitening toothpastes is the abrasive system. In general, these have been designed to give effective removal of extrinsic stains and help prevent tooth stains from reforming without undue abrasivity towards the dental hard tissues. Whitening toothpastes may contain additional agents that augment the abrasive cleaning by aiding the removal and/or prevention of extrinsic stains, for examples, peroxide, enzymes, citrate, pyrophosphate and hexametaphosphate, or optical agents such as blue covarine which can improve tooth whiteness following tooth brushing. In vitro methods used to evaluate tooth whitening efficacy typically determine the ability of a toothpaste formulation to remove/prevent model extrinsic stains on substrates such as enamel or hydroxyapatite or changes in the intrinsic color of tooth specimens. Clinical protocols for evaluating the efficacy of whitening toothpastes typically determine either stain removal or prevention, where changes in natural stain or chlorhexidine/tea induced stain are measured typically over 2-6 weeks. In some clinical studies the overall tooth color change was measured using techniques such as Vita shade guides, colorimeters and image analysis of digital photographs of teeth.

Clinical study investigating abrasive effects of three toothpastes and water in an in situ model

OBJECTIVES

This in situ study compared the abrasive effect of repeated brushings (over 10 days) of a low relative abrasive dentine (RDA) toothpaste with moderate and high relative abrasive dentine (RDA) toothpastes, on human dentine in situ.

MATERIALS AND METHODS

The study design was single centre, single blind, randomized, split mouth, two period, four-treatment cross-over, in situ study in 20 healthy subjects. Subjects wore bi-lateral lower buccal appliances each fitted with four dentine sections with treatment applied with a power toothbrush, during each 10 day study period. Samples were measured at baseline, day 5 and day 10 by contact profilometry, and baseline and day 10 with non-contact profilometry.

RESULTS

Nineteen subjects were included in the efficacy analysis. Results as measured by contact and non-contact profilometry from brushing with the moderate RDA paste and high RDA paste showed significantly (p<0.0001) more abrasion to dentine than brushing with the low RDA paste or water after 10 days. Dentine loss following tooth brushing with the low RDA paste was not significantly different from brushing with water, after 10 days.

CONCLUSIONS

The methodology successfully showed clear differentiation between the amount of dentine lost following toothbrushing with the low RDA paste compared to the moderate or high RDA pastes. Dentine loss following brushing with the low RDA paste showed a comparable degree of abrasion to brushing with water.

Symmetry of non-carious cervical lesions in canines and premolars

OBJECTIVES

Clinically non-carious cervical lesions (NCCLs) are frequently seen. The aim of this study was to investigate the relationship between the shape and symmetry of NCCLs, wear of cuSPS and triangular ridge, and the curvature of the tooth root.

METHODS

One hundred and twenty-nine extracted human upper canine teeth and 274 extracted human upper premolar teeth with NCCLs were used in this study. The specimens were studied using photographs and three-dimensional scanning.

RESULTS

Asymmetric NCCL was observed in 69.0% of the canines and 44.5% of the premolars. Wear of cusp and lingual ridges was observed in 82.9% and 93.0% of the canines, respectively. Wear of the buccal cusp and buccal triangular ridge was observed in 85.4% and 89.8% of the premolars, respectively. On the other hand, the wear of lingual cusp and lingual triangular ridge was observed in 89.1% and 93.8% of the premolars, respectively. The curvature of the root was observed in 48.1% of the canines and 43.4% of the premolars.

CONCLUSIONS

There was no relationship between the symmetry of NCCLs, and the wear of cuSPS and triangular ridges for either canines or premolars. Although there was a relationship (p < 0.05) between the symmetry of NCCL and the curvature of the root in the canines, no relationship was observed between the symmetry of NCCL and the curvature of the root in the premolars.

Wear of dentine in vitro by toothpaste abrasives and detergents alone and combined

AIM

To measure in vitro the abrasion of dentine by toothpaste detergents and abrasives alone and combined.

MATERIALS AND METHODS

Detergents used were tego betain, sodium lauryl sulphate (SLS), adinol and pluronic diluted to 1% w/v. Abrasives were three artificial silicas, tixosil 73 and 123 and Zeodent 113, and calcium carbonate used at 2.5% w/v. Flat human dentine specimens were brushed with aqueous detergent solutions or abrasive slurries, detergent abrasive slurries and water for 20,000 brush strokes. Dentine loss was measured by non-contacting profilometry at 10,000 and 20,000 strokes. Silica particle size distribution was measured by laser deflection.

RESULTS

Loss of dentine occurred with all detergents, abrasives and detergent abrasion combinations, but was not linear with number of brush strokes. Water appeared to remove the smear layer only, but all detergents exceeded the predicted smear layer thickness. The silica abrasives differed in abrasion properties despite similar particle size distribution. Different detergents modulated the abrasives actions in mainly positive or mainly negative directions.

CONCLUSIONS

Detergents appear able to attack the dentine surface to produce wear. Abrasives vary considerably in wear produced under similar conditions. Detergents modulate the effect of abrasives in a way that may reflect the rheological properties of the mixture.

The measurement in vitro of enamel and dentine wear by toothpastes of different abrasivity

OBJECTIVES

To investigate the in vitro enamel and dentine wear by toothpastes with a range of Relative Dentine Abrasivity (RDA) and Relative Enamel Abrasivity (REA) values.

METHODS

Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4 mm) were polished and the enamel indented with four Knoop indents. The step across the enamel-dentine junction was measured by interference microscopy. Specimens were brushed in vitro with toothpastes with a range of RDA/REA values using a flat trim toothbrush mounted in a Wira brushing machine for 360 s and a load of 375 g. After brushing the Knoop indent length and the enamel-dentine step were remeasured and the amount of wear to the enamel and dentine was calculated.

RESULTS

The mean enamel wear ranged from 0.05 to 0.40 microns, with the highest wear for the highest REA product. The mean dentine wear for all toothpaste products tested was positively correlated with RDA value (R2 = 0.897). The correlation was further improved if median wear values were used (R2 = 0.930).

CONCLUSIONS

This study has demonstrated a rapid technique for the simultaneous investigation of the abrasive wear of toothpaste on enamel and dentine. There was a good correlation between median dentine wear and RDA values.

Development of a method in situ to study toothpaste abrasion of dentine. Comparison of 2 products

BACKGROUND/AIMS

The abrasivity of toothpastes is usually determined using in vitro methods; as such, the clinical significance of the findings is uncertain. The aim of the present study was to develop and evaluate a method in situ to study abrasion of dentine by two toothpastes of different Relative Dentine Abrasivity (RDA).

METHOD

The study was a single blind, randomised, 2 way cross over design involving 10 healthy dentate volunteers. Subjects wore an maxillary removable acrylic appliance containing two flat human dentine specimens, taped to expose a window of tissue, from 9 am to 4 pm during the two 10 working day study periods. No food or drink was consumed when the appliance was in place. On five occasions each day, the appliances were removed and the dentine windows brushed ex vivo with the allocated paste for 60 s each. Dentine abrasion at days 5 and 10 was measured using a profilometer.

RESULTS

Both toothpastes produced measurable abrasion in all subjects and the depth increased in most subjects between 5 and 10 days. There was significant subject and specimen variation both within and between toothpastes. There was significantly increased abrasion by the toothpaste with the higher RDA value and in mean terms the ratio of abrasion between the two pastes was similar to the ratio of the RDA values.

CONCLUSION

The method in situ, already used to study dental hard tissue erosion, appears ideally suitable to study dental abrasion alone and the interaction between aetiological factors involved in tooth wear.

Quantitative light-induced fluorescence: a potential tool for general dental assessment

Current dental diagnostic methods can detect caries but cannot quantify the mineral status of a lesion. Quantitative light-induced fluorescence (QLF) measures the percentage of fluorescence change of demineralized enamel with respect to surrounding sound enamel, and relates it directly to the amount of mineral lost during demineralization. Development of caries-like lesions and subsequent remineralization of the lesions were monitored by QLF. The results showed that the percentage of fluorescence change (Delta Q) increased linearly with the demineralization time and decreased with increased remineralization time. Stained teeth were whitened with a bleaching agent and the change in stain intensity (Delta E) was quantified using QLF. The results showed that Delta E decreased linearly as the tooth regained its natural color. Factors that might affect the use of QLF to detect and quantify caries were also examined. It was concluded that QLF could be used to detect and longitudinally monitor the progression or remineralization of incipient caries, however lesion detection may be limited by the presence of saliva or plaque and enhanced by staining. The change in shade of discolored teeth by whitening agents could be quantitatively measured by QLF.

Abrasion and stain removal by different manual toothbrushes and brush actions: studies in vitro

BACKGROUND AND AIMS

A limited amount of data using flat trim multitufted toothbrushes shows that abrasion of substrate surfaces by a standard toothpaste varies dependent on filament stiffness and configuration; soft brushes producing the most abrasion. The aims of these studies in vitro were to assess toothpaste abrasion of acrylic and stain removal by 5 proprietary medium toothbrushes with different head filament arrangements, and a prototype brush with rectangular filaments. The prototype brush had a medium texture in the long axis and soft texture at right angles to the long axis.

MATERIAL AND METHOD

Optically clear acrylic was used as the substrate for abrasion by a standard toothpaste. Loss of substrate was determined by profilometry after 5000, 10000, 15000 and 20000 linear or rotary brushing actions. Stain removal was determined spectrophotometrically from optically clear acrylic specimens stained by chlorhexidine tea soaking sequences. Stained specimens were brushed with water using linear or rotary actions and measurements taken every 10 s to 60 s.

RESULTS

Abrasion was progressive with increasing strokes and the pattern for each brush and brush action was to a first approximation linear. Overall, abrasion was significantly greater with linear compared to rotary action. Also overall brushes differed in the abrasion produced with both actions and particularly at greater exposure times. Within brush differences for the two motions were all significant by 20000 strokes except for the prototype brush. Stain removal was progressive over time with each brush but the pattern was non-linear. For the proprietary brushes the rotary motion removed less stain. For the prototype brush more stain was removed with the rotary action. Overall brushes differed significantly in stain removal within each motion and for each motion most differences between the proprietary and prototype brushes reached significance.

CONCLUSIONS

The differences between brushes for both abrasion and stain removal must in large part relate to the filament contact area with the substrate surface. Whilst the model may not be predictive of clinical differences, it could find use to establish minimum criteria for toothbrush action.

The chemical stain removal properties of 'whitening' toothpaste products: studies in vitro

BACKGROUND

A considerable number of toothpastes are available as tooth whitening products. Most appear to contain ingredients that might remove extrinsic stains rather than change natural tooth colour. Extrinsic stain removal could be achieved by physical or chemical means.

AIM

The purpose of this study was to measure the chemical stain removal properties of a range of whitening toothpaste products and experimental formulations using a standardised method in vitro.

MATERIALS AND METHOD

5 separate studies were conducted involving a total of 39 agents of which 28 were whitening products, 7 were experimental formulations, 2 were oxidising mouthrinses used as positive controls, 1 was a popular fluoride toothpaste product as a benchmark control, and 1 was water as the negative control. The formulations and controls varied in each study. The stain model was saliva/chlorhexidine/tea stain developed on optically clear acrylic to an optical density of at least 2.0. Groups of stained specimens were exposed to standard slurries or solutions of each test agent for 1 minute periods up to 5 minutes. Optical density readings were taken at each 1 minute time point. Analyses were based on per cent stain remaining after 5 minutes and time to 75% stain remaining.

RESULTS

3 toothpaste products achieved 100% stain removal by 5 minutes; 2 of these in 3 out of 4 studies in which they were used. 4 experimental formulations also achieved 100% stain removal. In general agents with high total stain removal also had short times to 75% stain remaining. The majority of agents tested had low total chemical stain removal and prolonged times to 75% stain remaining. A few agents were little different from water and several similar in effect to the conventional fluoride toothpaste. This method in vitro tests agents under the best case scenario conditions for chemical stain removal.

CONCLUSION

Only a small number of the whitening toothpaste products have good chemical stain removal potential; the majority are unlikely to achieve their claimed benefits through chemical stain removal. There is clearly a need for further data on the actual effects of such products using both methods in vitro and particularly in vivo or in situ.

Evaluation of oral hygiene products: science is true; don't be misled by the facts

Most people in industrialized countries use oral hygiene products. When an oral health benefit is expected, it is important that sufficient scientific evidence exist to support such claims. Ideally, data should be cumulative derived from studies in vitro and in vivo. The data should be available to the profession for evaluation by publication in refereed scientific journals. Terms and phrases require clarification, and claims made by implication or derived by inference must be avoided. Similarity in products is not necessarily proof per se of efficacy. Studies in vitro and in vivo should follow the basic principles of scientific research. Studies must be ethical, avoid bias and be suitably controlled. A choice of controls will vary depending on whether an agent or a whole product is evaluated and the development stage of a formulation. Where appropriate, new products should be compared with products already available and used by the general public. Conformity with the guidelines for good clinical practice appears to be a useful way of validating studies and a valuable guide to the profession. Studies should be designed with sufficient power to detect statistically significant differences if these exist. However, consideration must be given to the clinical significance of statistically significant differences between formulations since these are not necessarily the same. Studies in vitro provide supportive data but extrapolation to clinical effect is difficult and even misleading, and such data should not stand alone as proof of efficacy of a product. Short-term studies in vivo provide useful information, particularly at the development stage. Ideally, however, products should be proved effective when used in the circumstances for which they are developed. Nevertheless, a variety of variable influence the outcome of home-use studies, and the influence of the variable cannot usually be calculated. Although rarely considered, the cost-benefit ratio of some oral hygiene products needs to be considered.

Studies on stannous fluoride toothpaste and gel (2). Effects on salivary bacterial counts and plaque regrowth in vivo

There has been a resurgence of interest in stannous fluoride (SF) products in particular to provide oral hygiene and gingival health benefits. The aim of this study was to assess the persistence of antimicrobial action of a number of SF formulations in the mouth and relate these to plaque inhibitory activity. The formulations were 2 SF toothpastes (SF1, SF2), 2 SF plus stannous pyrophosphate toothpastes (SFSP1, SFSP2), a SF gel (G), a NaF toothpaste (C) and saline (S) as control. Both studies involve 2 different groups of 21 healthy dentate volunteers. The studies were single, blind, randomised, crossover designs balanced for residual effects, with a minimum 2 1/2 day washout period. Salivary bacterial counts were determined before and to 7 h after a single rinse with the formulations. Plaque regrowth from a zero baseline (day 1) was measured by index and area on day 5, after 2x daily rinsing with slurries of the formulations or saline. For bacterial counts, highly significant treatment differences were found. Bacterial counts were variably reduced by all treatments to 30 min then showed a variable rate of return towards baseline. All test agents were significantly better than S at some timepoints. The order for greatest persistence of action downwards was; (1) SFSP2; (2) SFSP1, G, and SF1; (3) SF2; (4) C; (5) S. Highly significant differences in plaque regrowth between treatments were found with similar mean ordering of efficacy as for salivary bacterial counts from most effective downwards namely; (1) SFSP1 and SFSP2; (2) SF1; (3) SF2; G and C; (4) S. The results were consistent with a parallel study measuring tea staining in vitro, whereby formulations causing the most staining produced the greatest persistence of action and plaque inhibitory activity. This suggests the availability of stannous ions was important for the clinical effects. It is concluded that stannous ions can enhance the plaque inhibitory action of toothpaste via a persistent antimicrobial action.

Studies on stannous fluoride toothpaste and gel (1). Antimicrobial properties and staining potential in vitro

Stannous fluoride (SF) in a toothpaste vehicle has the potential to provide anticaries and plaque inhibitory benefits through the fluoride and antimicrobial stannous moieties respectively. Dental staining, however, can occur by precipitation of dietary chromogens onto the tooth surface by stannous ions. These studies in vitro compare the antimicrobial profile and propensity to cause tea staining of a number of stannous fluoride formulations. The formulations used were 2 SF toothpaste products (SF1, SF2), 2 experimental SF plus stannous pyrophosphate toothpastes (SFSP1, SFSP2), a SF gel (G) and a NaF toothpaste (C). Maximum inhibitory dilution values against a range of oral bacteria were determined by agar dilution. Tea staining was measured spectrophotometrically on saliva coated clear acrylic blocks exposed to slurries of the paste or gel. All formulations showed antimicrobial activity with the order of greatest activity downwards being C, SF2, SF1, SFSP1, SFSP2 and G. Tea staining at 10 exposures was in the following descending order of optical density SFSP1, SFSP2, G. C, SF1, SF2, water control. The antimicrobial profile of G was similar to that of SF, whereas that of the other formulations were varied but similar to a detergent profile. The difference in staining suggested considerable variation in availability of stannous ions in the formulations. However, the propensity for stannous ions to stain must be balanced against the stain removal propensity of the contained detergents in the toothpaste formulations. In conclusion, the variation in antimicrobial activity and more particularly staining activity of the formulations suggest the products will vary in activity in vivo.

Aetiological, predisposing and environmental factors in dentine hypersensitivity

If the hydrodynamic theory of stimulus transmission across dentine is valid, sensitive dentine has tubules open at the surface and patent to the pulp. Direct and indirect evidence supports this supposition. Factors that result in dentine exposure remove the covering enamel or periodontal tissues (gingival recession). Epidemiological and clinical data for the distribution of exposed cervical dentine indicate that chronic trauma from physical and chemical factors is the most significant aetiological factor. Brushing with a toothpaste may not open dentinal tubules. It is more likely that toothpaste ingredients, when brushed on dentine, would create a smear layer. Exposure of tubules by erosion is probably the major initiator of sensitivity. An increase in our understanding of the aetiological factors involved in dentine hypersensitivity is essential if a sound approach to its management is to evolve. Such information could emanate from epidemiological studies, clinical investigations and laboratory experiments.