Reverse micelles as hosts for proteins and small molecules

Exploring the Application of Terahertz Metamaterials Based on Metallic Strip Structures in Detection of Reverse Micelles

Terahertz spectroscopy has unique advantages in the study of biological molecules in aqueous solutions. However, water has a strong absorption capability in the terahertz region. Reducing the amount of liquid could decrease interference with the terahertz wave, which may, however, affect the measurement accuracy. Therefore, it is particularly important to balance the amount and water content of liquid samples. In this work, a terahertz metamaterial sensor based on metallic strips is designed, fabricated, and used to detect reverse micelles. An aqueous confinement environment in reverse micelles can improve the signal-to-noise ratio of the terahertz response. Due to "water pool" trapped in reverse micelles, the DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine) solution and DOPC emulsion can successfully be identified in intensity by terahertz spectroscopy. Combined with the metamaterial sensor, an obvious frequency shift of 30 GHz can be achieved to distinguish the DOPC emulsion (5%) from the DOPC solution. This approach may provide a potential way for improving the sensitivity of detecting trace elements in a buffer solution, thus offering a valuable toolkit toward bioanalytical applications.

Anomalous proton transfer of a photoacid HPTS in nonaqueous reverse micelles

The proton transfer reaction is one of the fundamental chemical reactions where the reaction dynamics strongly depend on solvent properties such as acidity or basicity. A photoacid 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS) shows a sharp decrease of pKa (7.7 → 0.5) upon photoexcitation, and the excited-state proton transfer (ESPT) occurs with ultrafast time constants of 2.5 and 89 ps in bulk aqueous solution. However, the two-step proton transfers via the contact ion pair formation and the proton diffusion are strongly limited inside the nanopools of reverse micelles (RMs). The confinement in small RMs strongly impeded the proton transfer reactions. In this work, we report the ESPT of HPTS confined in methanol-in-oil RMs by steady-state and time-resolved electronic spectroscopy. Interestingly, HPTS shows substantial deprotonation in the excited state only in small RMs, while the ESPT of HPTS does not occur in bulk methanol solution due to the low basicity of aliphatic alcohols. The kinetic analysis of time-resolved fluorescence and transient absorption measurements will compare the proton transfer dynamics of HPTS in the water-in-oil and methanol-in-oil RMs. The ESPT of photoacids, especially in the nonaqueous RMs, can be crucial in understanding many important chemical reactions involving proton transfer in the confined environments of cells and membranes.

Investigating protein-membrane interactions using native reverse micelles constructed from naturally sourced lipids

Advancing the study of membrane associated proteins and their interactions is dependent on accurate membrane models. While a variety of membrane models for high-resolution membrane protein study exist, most do not reflect the diversity of lipids found within biological membranes. In this work, we have developed native reverse micelles (nRMs) formulated with lipids from multiple eukaryotic sources, which encapsulate proteins and enable them to interact as they would with a biological membrane. Diverse formulations of nRMs using soy lecithin, porcine brain lipids, or bovine heart lipids combined with n-dodecylphosphocholine were developed and characterized by dynamic light scattering and 31 P-NMR. To optimize protein encapsulation, ubiquitin was used as a standard and protein NMR verified minimal changes to its structure. Peripheral membrane proteins, which bind reversibly to membranes, were encapsulated and include glutathione peroxidase 4 (GPx4), phosphatidylethanolamine-binding protein 1 (PEBP1), and fatty acid binding protein 4 (FABP4). All three proteins showed anticipated interactions with the membrane-like inner surface of the nRMs as assessed by protein NMR. The nRM formulations developed here allow for efficient, high-resolution study of membrane interacting proteins up to and beyond ~21 kDa, in a more biologically relevant context compared to other non-native membrane models. The approach outlined here may be applied to a wide range of lipid extracts, allowing study of a variety of membrane associated proteins in their specific biological context.

Forced Interactions: Ionic Polymers at Charged Surfactant Interfaces

Characterizing electrostatic interactions at heterogeneous interfaces is critical for developing a fundamental description of the dynamic processes at charged interfaces. Water-in-oil reverse micelles (RMs) offer a high degree of tunability across composition, polarity, and temperature, making them ideal systems for studying interactions at heterogeneous liquid-liquid interfaces. In the present study, we use a combination of ultrafast two-dimensional infrared spectroscopy and molecular dynamics (MD) simulations to determine the picosecond interfacial dynamics in RMs containing binary compositions of sorbitan monostearate and anionic or cationic cosurfactants, which are used to tune the ratio of charged to nonionic surfactants at the interface. The positively charged polyethylenimine (PEI) polymer is encapsulated within the RMs, and the carbonyl stretching mode of sorbitan monostearate reports on the interfacial hydrogen-bond populations and dynamics. The results show that hydrogen-bond populations are altered through the inclusion of both negatively and positively charged cosurfactants. Charged surfactants increase interfacial water penetration into the surfactant layer, and the surface localization of polymers decreases water penetration. Local hydrogen-bond dynamics undergo a slowdown with the inclusion of charged surfactants, and the encapsulation of polymers results in similar effects, irrespective of the charge.

Hysteresis behavior in the unfolding/refolding processes of a protein trapped in metallo-cages

Confinement of molecules in a synthetic host can physically isolate even their unstable temporary structures, which has potential for application to protein transient structure analysis. Here we report the NMR snapshot observation of protein unfolding and refolding processes by confining a target protein in a self-assembled coordination cage. With increasing acetonitrile content in CD₃CN/H₂O media (50 to 90 vol%), the folding structure of a protein sharply denatured at 83 vol%, clearly revealing the regions of initial unfolding. Unfavorable aggregation of the protein leading to irreversible precipitation is completely prevented because of the spatial isolation of the single protein molecule in the cage. When the acetonitrile content reversed (84 to 70 vol%), the once-denatured protein started to regain its original folded structure at 80 vol%, showing that the protein folding/unfolding process can be referred to as a phase transition with hysteresis behavior.

Deciphering the Nanoconfinement Effect on the Folding Pathway of c-MYC Promoter-Based Intercalated-Motif DNA by Single-Molecule Förster Resonance Energy Transfer

Intercalated-motif (i-motif) DNA formed by cytosine (C)-rich sequences has been considered a novel target in anticancer research. Interestingly, this type of noncanonical DNA structure is highly dynamic and can display several conformational polymorphisms based on the immediate surrounding environment. However, studies regarding the folding pathway of i-motifs having disease-specific sequences under a confined environment at physiological pH are relatively scarce. This thereby warrants more explorations that will decipher their structural and functional properties inside constrained media. Herein, using the single-molecule Förster Resonance Energy Transfer (smFRET) studies, for the first time, we have illustrated the conformational dynamics of c-MYC promoter-based i-motif structures at physiological pH inside microemulsions of different dimensions. We concluded that the folding of such motifs under confined space is not a direct transition between the random coil and i-motif conformations; rather it occurs through a partially folded intermediate, depending on the confined dimension.

Finding or Creating a Living Organism? Past and Future Thought Experiments in Astrobiology Applied to Artificial Intelligence

This is a digest of how various researchers in biology and astrobiology have explored questions of what defines living organisms-definitions based on functions or structures observed in organisms, or on systems terms, or on mathematical conceptions like closure, chirality, quantum mechanics and thermodynamics, or on biosemiotics, or on Darwinian evolution-to clarify the field and make it easier for endeavors in artificial intelligence to make progress. Current ideas are described to promote work between astrobiologists and computer scientists, each concerned with living organisms. A four-parameter framework is presented as a scaffold that is later developed into what machines lack to be considered alive: systems, evolution, energy and consciousness, and includes Jagers operators and the idea of dual closure. A novel definition of consciousness is developed which describes mental objects both with and without communicable properties, and this helps to clarify how consciousness in machines may be studied as an emergent process related to choice functions in systems. A perspective on how quantization, acting on nucleic acids, sets up natural limits to system behavior is offered as a partial address to the problem of biogenesis.

Dynamic effect of polymers at the surfactant-water interface: an ultrafast study

Interfaces play a role in controlling the rates and outcomes of chemical processes. Characterizing the interactions at heterogeneous interfaces is critical to developing a comprehensive model of the role of interfaces and confinement in modulating chemical reactions. Reverse micelles are an ideal model system for exploring the effect of encapsulated species on interfacial environments. Here, we use a combination of ultrafast two-dimensional infrared (2D IR) spectroscopy and molecular dynamics (MD) simulations to characterize the picosecond interfacial dynamics in reverse micelles (RMs) containing acrylamide monomers and polyacrylamide polymers within the aqueous phase. The ester carbonyl vibrations of the sorbitan monostearate surfactants are examined to extract interfacial hydrogen-bonding populations and dynamics. Hydrogen bond populations at the ester carbonyl positions remain unchanged with the inclusion of either polymer or monomer species. Hydrogen-bond dynamics are not altered with the addition of monomer but are slowed down twofold in the presence of encapsulated polyacrylamide polymer species as a result of polymer chains partially localizing to the interface. These findings imply that kinetics of reactions that occur at interfaces or in confined environments could be modulated by interfacial localization of the different components.

Ultrafast Excited-State Proton Transfer of a Cationic Superphotoacid in a Nanoscopic Water Pool

The excited-state proton transfer (ESPT) of a cationic superphotoacid, N-methyl-7-hydroxyquinolium, was studied within the water pool of an anionic aerosol-OT (AOT), bis(2-ethylhexyl) sulfosuccinate, reverse micelle (RM). Previously, we had found that the cationic photoacid residing at the anionic AOT interface was conducive to ESPT to the bound water having concentric heterogeneity on the time scale of hundreds of picoseconds to nanoseconds. In our present study, on the time scale of hundreds of femtoseconds to a few tens of picoseconds, the photoacid underwent an ultrafast ESPT influenced by mobile water constituting the core of the RM. The two subpopulations of the core water molecules that determine the ultrafast biphasic deprotonation of the photoacid on time scales differing by an order of magnitude were identified. The core water molecules solvating the counteranion of the photoacid showed a higher basicity than typical water clusters in bulk resulting in ESPT on a subpicosecond time scale. Bare water clusters sensed by the photoacid showed a slower ESPT, over several picoseconds, as typically limited by the rotational motion of water molecules for similar types of the photoacid.

How to Characterize Amorphous Shapes: The Tale of a Reverse Micelle

Aerosol-OT reverse micelles represent a chemical construct where surfactant molecules self-assemble to stabilize water nanodroplets 1-10 nm in diameter. Although commonly assumed to adopt a spherical shape, all-atom molecular dynamics simulations and some experimental studies predict a nonspherical shape. If these aggregates are not spherical, then what shape do they take? Because the tools needed to evaluate the shape of something that lacks regular structure, order, or symmetry are not well developed, we present a set of three intuitive metrics─coordinate-pair eccentricity, convexity, and the curvature distribution─that estimate the shape of an amorphous object, and we demonstrate their use on a simulated aerosol-OT reverse micelle. These metrics are all well-established methods and principles in mathematics, and each provides unique information about the shape. Together, these metrics provide intuitive descriptions of amorphous shapes, facilitate ways to quantify those shapes, and follow their changes over time.

Site specific NMR characterization of abeta-40 oligomers cross seeded by abeta-42 oligomers

Extracellular accumulation of β amyloid peptides of 40 (Aβ₄₀) and 42 residues (Aβ₄₂) has been considered as one of the hallmarks in the pathology of Alzheimer's disease. In this work, we are able to prepare oligomeric aggregates of Aβ with uniform size and monomorphic structure. Our experimental design is to incubate Aβ peptides in reverse micelles (RMs) so that the peptides could aggregate only through a single nucleation process and the size of the oligomers is confined by the physical dimension of the reverse micelles. The hence obtained Aβ oligomers (AβOs) are 23 nm in diameter and they belong to the category of high molecular-weight (MW) oligomers. The solid-state NMR data revealed that Aβ₄₀Os adopt the structural motif of β-loop-β but the chemical shifts manifested that they may be structurally different from low-MW AβOs and mature fibrils. From the thioflavin-T results, we found that high-MW Aβ₄₂Os can accelerate the fibrillization of Aβ₄₀ monomers. Our protocol allows performing cross-seeding experiments among oligomeric species. By comparing the chemical shifts of Aβ₄₀Os cross seeded by Aβ₄₂Os and those of Aβ₄₀Os prepared in the absence of Aβ₄₂Os, we observed that the chemical states of E11, K16, and E22 were altered, whereas the backbone conformation of the β-sheet region near the C-terminus was structurally invariant. The use of reverse micelles allows hitherto the most detailed characterization of the structural variability of Aβ₄₀Os.

Extracellular accumulation of β amyloid peptides of 40 (Aβ₄₀) and 42 residues (Aβ₄₂) has been considered as one of the hallmarks in the pathology of Alzheimer's disease.

Nanomicellar Extraction of Polyphenols-Methodology and Applications Review

The selection of the appropriate extraction method is crucial, especially for the receiving of active substances from plant material. The extraction using supercritical liquids and micellar-mediated extraction (MME) is the most advantageous among the alternative methods to classical solid-liquid extraction. However, the latter seems to be the best solution when the desired actives are polar. The following article presents a comprehensive review of the micellar-mediated extraction method in the last decade. The theoretical principle of the process was also refreshed and the current state of knowledge on the applications for analytical and manufacturing purposes was summarized.

Enhanced Hydrodynamic Radius of AOT/n-heptane/Water Reverse Micellar System Through Altered Electrostatic Interactions and Molecular Self-Assemblies

We have demonstrated a unique approach to alter the aqueous pool size of an AOT/n-heptane/water reverse micellar system. A positively charged dye Rhodamine B (RhB) and negatively charged Rose Bengal (RB) were incorporated in the reverse micellar pool to investigate the effect of electrostatic interactions and stacking effects among the dye molecules on the AOT/n-heptane/water interface. Dynamic light scattering revealed increase in reverse micellar pool size in presence of positively charged dye aggregates at the oil-water interface. However, less expansion was observed in presence of negatively charged dye aggregates (RB). This confirms the role of electrostatic interaction in modulating the hydrodynamic radius. A head-to-tail type of stacking of RhB molecules at the interface favors this expansion. The differences in stacking of the two dyes inside the reverse micelles and their torsional mobility indicated the role of the reverse micellar interface and H-bonding ability of the microenvironment on dye aggregation. Conductivity measurements demonstrated a significant drop in percolation temperature of the reverse micellar system in presence of dye aggregates. This confirms the effect of dye aggregation and electrostatic interaction on such expansion. This strategy can be exploited for solubilizing greater amounts and a wider variety of drug molecules in microemulsions.

Functional and structural properties of soy 11S globulin: Influence of reverse micelle extraction

The effect of the reverse micelle extraction method (RMEM) on the physicochemical properties of soy 11S globulin was studied and compared with that of the traditional alkali solution-acid precipitation method (ASAPM). The results showed that the β-sheet structure content of soy 11S globulin obtained by RMEM was lower, while the β-turn structure content was higher compared with that obtained by ASAPM. Furthermore, the protein unfolding degree and surface hydrophobicity were lower than those observed using ASAPM. Therefore, RMEM better maintained the natural molecular structure of soy 11S globulin. The thermodynamic and rheological properties of soy 11S globulin obtained by these two methods were further compared, showing that the highest denaturation temperature and transition heat of soy 11S globulin extracted using ASAPM were different from those obtained using RMEM. Furthermore, soy 11S globulin extracted by RMEM showed stronger heat resistance and a higher denaturation temperature than that extracted by ASAPM. The final storage modulus and frequency sweep results showed that the gel formed by soy 11S globulin obtained using RMEM had high storage modulus and loss modulus. PRACTICAL APPLICATION: In this study, the effects of two different extraction methods on structural and functional properties of soy 11S globulin, such as thermodynamics and rheology, were investigated. We can know the 11S globulin extracted using the reverse micelle environment was more heat-resistant and heat-induced gel quality of 11S globulin was improved by the reverse micelle environment. These results will provide theoretical basis that would help determine the potential applications of soy 11S globulin in the food system.

Transport of Oligopeptide from Aqueous Phase to Span 80 Reverse Micelles in Microdroplet Array

The partitioning of water and tetramethylrhodamine-conjugated-10-residue oligopeptides from the aqueous phase of microdroplets into Span 80 reverse micelles was observed by utilizing microdroplet arrays. Each peptide was dissolved in phosphate buffer saline, and initially encapsulated in arrayed droplets. An organic phase containing the reverse micelles was added to the microdroplets. Here, the hydration degree of the reverse micelle was adjusted by contact of the organic phase with a 1.0 M NaCl aqueous solution or with a phosphate buffer saline before combining it with the microdroplets. For micelles treated with a 1.0 M NaCl, significant water transport from the microdroplet to the micelle was observed, and peptide with low solubility in water was transported to the reverse micelles, while those with high solubility in water were not. For micelles treated with phosphate buffer saline, the water transport was minimal, and no significant peptide transport was observed. These results suggest that the partitioning of low-solubility oligopeptides requires accompanying water transport to the reverse micelle phase.

Nanoconfinement Raises the Energy Barrier to Hydrogen Atom Exchange between Water and Glucose

In bulk aqueous environments, the exchange of protons between labile hydroxyl groups typically occurs easily and quickly. Nanoconfinement can dramatically change this normally facile process. Through exchange spectroscopy (EXSY) NMR measurements, we observe that nanoconfinement of glucose and water within AOT (sodium bis(2-ethylhexyl) sulfosuccinate) reverse micelles raises the energy barrier to labile hydrogen exchange, which suggests a disruption of the hydrogen bond network. Near room temperature, we measure barriers high enough to slow the process by as much as 2 orders of magnitude. Although exchange rates slow with decreasing temperatures in these nanoconfined environments, the barrier we measure below ∼285 K is 3-5 times lower than the barrier measured at room temperature, indicating a change in mechanism for the process. These findings suggest the possibility of hydrogen tunneling at a surprisingly high-temperature threshold. Furthermore, differences in exchange rates depend on the hydroxyl group position on the glucose pyranose ring and suggest a net orientation of glucose at the reverse micelle interface.

Versatility of Reverse Micelles: From Biomimetic Models to Nano (Bio)Sensor Design

This paper presents an overview of the principal structural and dynamics characteristics of reverse micelles (RMs) in order to highlight their structural flexibility and versatility, along with the possibility to modulate their parameters in a controlled manner. The multifunctionality in a large range of different scientific fields is exemplified in two distinct directions: a theoretical model for mimicry of the biological microenvironment and practical application in the field of nanotechnology and nano-based sensors. RMs represent a convenient experimental approach that limits the drawbacks of the conventionally biological studies in vitro, while the particular structure confers them the status of simplified mimics of cells by reproducing a complex supramolecular organization in an artificial system. The biological relevance of RMs is discussed in some particular cases referring to confinement and a crowded environment, as well as the molecular dynamics of water and a cell membrane structure. The use of RMs in a range of applications seems to be more promising due to their structural and compositional flexibility, high efficiency, and selectivity. Advances in nanotechnology are based on developing new methods of nanomaterial synthesis and deposition. This review highlights the advantages of using RMs in the synthesis of nanoparticles with specific properties and in nano (bio)sensor design.

Versatile surface-active ionic liquid: construction of microemulsions and their applications in light harvesting

This article outlines a sustainable method towards the synthesis of advanced materials such as core/shell Quantum Dots (QDs) and their in situ stabilization using microemulsions (MEs). QDs are versatile materials which show unusual optical properties. We have constructed MEs consisting of an Ionic Liquid (IL) based surfactant i.e. choline dioctylsulfosuccinate, [Cho][AOT] as an emulsifier, toluene as a nonpolar phase and water as a polar phase. The system forms a large single-phase region in the phase diagram without any co-surfactant. Spontaneous formation of micelles has been observed and studied through tensiometry and fluorescence and isothermal titration calorimetry (ITC). The exceptional swelling behaviour of the MEs was studied using Dynamic Light Scattering (DLS) and small angle neutron scattering (SANS). In ME droplets, i.e. Reverse Micelles (RMs), we successfully synthesized spherical core/shell QDs (size ∼3 to ∼6 nm) with precise control over the size and morphology. The QDs have been characterized using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Powder X-ray Diffraction (PXRD). QDs stabilized in MEs exhibited excellent optical properties and can be suitably used as light harvesting materials for diverse applications.

Role of Different States of Solubilized Water on Solvation Dynamics and Rotational Relaxation of Coumarin 490 in Reverse Micelles of Gemini Surfactants, Water/12-s-12.2Br- (s = 5, 6, 8)/n-Propanol/Cyclohexane

The present study demonstrates how the different states of solubilized water viz. quaternary ammonium headgroup-bound, bulklike, counterion-bound, and free water in reverse micelles of a series of cationic gemini surfactants, water/12-s-12 (s = 5, 6, 8).2Br^-/n-propanol/cyclohexane, control the solvation dynamics and rotational relaxation of Coumarin 490 (C-490) and microenvironment of the reverse micelles. The relative number of solubilized water molecules of a given state per surfactant molecule decides major and minor components. A rapid increase in the number of bulklike water molecules per surfactant molecule as compared to the slow increase in the number of each of headgroup- and counterion-bound water molecules per surfactant molecule with increasing water content (W _o) in a given reverse micellar system is responsible for the increase in the rate of solvation and rotational relaxation of C-490. The increase in the number of counterion-bound water molecules per surfactant molecule and the concomitant decrease in the number of bulklike water molecules per surfactant molecule with increasing spacer chain length of gemini surfactants at a given W _o are ascribed to the slower rates of both solvation and rotational relaxation. Relative abundances of different states of water have a role on the microenvironment of the reverse micelles as well. Thus, a comprehensive effect of different states of water on dynamics in complex biomimicking systems has been presented here.

Water loading driven size, shape, and composition of cetyltrimethylammonium/hexanol/pentane reverse micelles

Cetyltrimethylammonium bromide (CTAB)/hexanol reverse micelles have found a variety of applications that demand control over physical parameters. Water content or loading is among the most basic tunable components and is the major driver of the physical properties of these systems. This study uses small-angle scattering with contrast variation to characterize these systems as a function of water loading. The scattering data were analyzed with a variety of approaches, resulting in converging physical specifications. Equations that describe basic physical parameters were determined that allow for characterization and manipulation of the CTAB/hexanol reverse micelle surfactant system. The shape of the reverse micelles was revealed to be slightly ellipsoidal and varies slightly through the water loading range. The surfactant shell is shown to contain a higher fraction of hexanol upon addition of water. Analysis reveals that the size, shape, and surfactant/cosurfactant composition are directly tunable by variation of the water content and that these properties are consequences of the balance of forces present in the reverse micelles.

Formulation and Structural Study of a Biocompatible Water-in-Oil Microemulsion as an Appropriate Enzyme Carrier: The Model Case of Horseradish Peroxidase

A novel biocompatible water-in-oil microemulsion was developed using nonionic surfactants and was investigated as a potential enzyme delivery system for pharmaceutical applications. The system was composed of isopropyl myristate/polysorbate 80 (Tween 80)/distilled monoglycerides/water/propylene glycol (PG), had a low total surfactant concentration (8.3% w/w), and was able to incorporate approximately 3% w/w aqueous phase containing horseradish peroxidase (HRP). Structural and activity aspects of the system were studied using a variety of techniques such as dynamic light scattering (DLS), electron paramagnetic resonance (EPR), and dynamic interfacial tension. The apparent hydrodynamic diameter of the empty droplets was calculated at about 37 nm. Different enzyme concentrations, ranging from 0.01 to 1.39 μM, were used for both DLS and EPR studies to effectively determine the localization of the macromolecule in the microemulsion. According to the results, for high enzyme concentrations, a participation of HRP in the surfactant monolayer of the microemulsion is evident. The number of reverse micelles in the microemulsion was defined by a theoretical model and was used to clarify how the enzyme concentration affects the number of empty and loaded reverse micelles. To assure that the system allows the enzyme to retain its catalytic activity, an oxidative reaction catalyzed by HRP was successfully carried out with the use of the model substrate 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonic acid]. The influence of several parameters such as temperature, pH, and PG concentration was examined to optimize the reaction conditions, and a kinetic study was conducted revealing an ordered-Bi-Bi mechanism. Values of all kinetic parameters were determined. The release of the encapsulated enzyme was studied using an adequate receiver phase, revealing the effectiveness of the proposed microemulsion not only as a microreactor but also as a carrier for therapeutic biomolecules.

Reverse Micelle Encapsulation of Proteins for NMR Spectroscopy

Reverse micelle (RM) encapsulation of proteins for NMR spectroscopy has many advantages over standard NMR methods such as enhanced tumbling and improved sensitivity. It has opened many otherwise difficult lines of investigation including the study of membrane-associated proteins, large soluble proteins, unstable protein states, and the study of protein surface hydration dynamics. Recent technological developments have extended the ability of RM encapsulation with high structural fidelity for nearly all proteins and thereby allow high-quality state-of-the-art NMR spectroscopy. Optimal conditions are achieved using a streamlined screening protocol, which is described here. Commonly studied proteins spanning a range of molecular weights are used as examples. Very low-viscosity alkane solvents, such as propane or ethane, are useful for studying very large proteins but require the use of specialized equipment to permit preparation and maintenance of well-behaved solutions under elevated pressure. The procedures for the preparation and use of solutions of RMs in liquefied ethane and propane are described. The focus of this chapter is to provide procedures to optimally encapsulate proteins in reverse micelles for modern NMR applications.

Toward comprehensive measurement of protein hydration dynamics: Facilitation of NMR-based methods by reverse micelle encapsulation

Protein-water interactions are a fundamental determinant of protein structure and function. Despite their importance, the molecular details of water orientations and dynamics near protein surfaces remain poorly understood, largely due to the difficulty of measuring local water mobility near the protein in a site-resolved fashion. Solution NMR-based measurement of water mobility via the nuclear Overhauser effect was presented as a method for performing comprehensive, site-resolved measurements of water dynamics many years ago. Though this approach yielded extensive insight on the dynamics and locations of waters buried within proteins, its promise for measuring surface hydration dynamics was impeded by various technical barriers. Over the past several years, however, this approach has been pursued anew with the aid of reverse micelle encapsulation of proteins of interest. The confined environment of the reverse micelle resolves many of these barriers and permits site-resolved measurement of relative water dynamics across much of the protein surface. Here, the development of this strategy for measuring hydration dynamics is reviewed with particular focus on the important remaining challenges to its widespread application.

One-step mild biorefinery of functional biomolecules from microalgae extracts

Fractionation of complex matrices such as biomass into diverse functional biomolecules without disrupting the biomolecule functionalities is a real challenge.

Synthesis, Functionalization, and Design of Magnetic Nanoparticles for Theranostic Applications

In order to translate nanotechnology into medical practice, magnetic nanoparticles (MNPs) have been presented as a class of non-invasive nanomaterials for numerous biomedical applications. In particular, MNPs have opened a door for simultaneous diagnosis and brisk treatment of diseases in the form of theranostic agents. This review highlights the recent advances in preparation and utilization of MNPs from the synthesis and functionalization steps to the final design consideration in evading the body immune system for therapeutic and diagnostic applications with addressing the most recent examples of the literature in each section. This study provides a conceptual framework of a wide range of synthetic routes classified mainly as wet chemistry, state-of-the-art microfluidic reactors, and biogenic routes, along with the most popular coating materials to stabilize resultant MNPs. Additionally, key aspects of prolonging the half-life of MNPs via overcoming the sequential biological barriers are covered through unraveling the biophysical interactions at the bio-nano interface and giving a set of criteria to efficiently modulate MNPs' physicochemical properties. Furthermore, concepts of passive and active targeting for successful cell internalization, by respectively exploiting the unique properties of cancers and novel targeting ligands are described in detail. Finally, this study extensively covers the recent developments in magnetic drug targeting and hyperthermia as therapeutic applications of MNPs. In addition, multi-modal imaging via fusion of magnetic resonance imaging, and also innovative magnetic particle imaging with other imaging techniques for early diagnosis of diseases are extensively provided.

Kinetic Switching of the Concentration/Separation Behavior of Microdroplets

This work demonstrates that the solute concentration inside 100 micrometer-sized aqueous microdroplets can be controlled by adjusting the time required for the aqueous nanometer-sized droplets (nanodroplet) or reverse micelles to pass over the surface of the microdroplet. The kinetics of molecular transport between the microdroplets and the nanodroplets was investigated by utilizing a microdroplet array, and on the basis of these results, a control over the concentration selectivity of the contents of the microdroplet was achieved. This method is operationally simple and can be potentially applied as a pretreatment method for microanalytical systems that require high-density microdroplet arrays. This method can also be utilized for parallel small sample analyses such as single cell analysis.

Nanoencapsulated Lecitase Ultra and Thermomyces lanuginosus Lipase, a Comparative Structural Study

Two commercially available and widely used enzymes, the parent Thermomyces lanuginosus lipase (TLL) and the shuffled phospholipase A1 Lecitase (Lecitase Ultra), were encapsulated in AOT/isooctane reverse micelles and evaluated regarding their structure and activity. Preparations were also tested as effective biocatalysts. Small-angle X-ray scattering (SAXS), electronic paramagnetic resonance (EPR), and fluorescence spectroscopy were the techniques applied to assess the effects of enzyme incorporation to a reverse micellar nanostructure. SAXS analysis showed that the radius of gyration (Rg) changed from 16 to 38 Å, as the water content (w0) increased. Elongated shapes were more commonly observed than spherical shapes after enzyme encapsulation. EPR studies indicated that enzymes do not participate in the interface, being located in the aqueous center. Fluorescence energy transfer showed that TLL is located in the water core, whereas Lecitase Ultra is closer to the interface. Enzymatic activity toward a standard esterification reaction endured after the enzyme was incorporated into the micelles. The activity of TLL for systems with w0 15 showed the highest conversion yield, 38% in 2 h, while the system with w0 10 showed the highest initial velocity, 0.43 μM/min. This last system had a Rg of 19.3 Å, similar to that of the TLL monomer. Lecitase Ultra showed the highest conversion yields in systems with w0 10, 55% in 2 h. However, the initial rate was much lower than that of TLL, suggesting less affinity for the substrates, which is expected since Lecitase Ultra is a phospholipase. In summary, we here used several spectroscopic and scattering techniques to reveal the shape and stability of TTL and Lecitase Ultra encapsulated systems, which allowed the selection of w0 values to provide optimized enzymatic activity.

Enzymatic reactions in confined environments

Within each biological cell, surface- and volume-confined enzymes control a highly complex network of chemical reactions. These reactions are efficient, timely, and spatially defined. Efforts to transfer such appealing features to in vitro systems have led to several successful examples of chemical reactions catalysed by isolated and immobilized enzymes. In most cases, these enzymes are either bound or adsorbed to an insoluble support, physically trapped in a macromolecular network, or encapsulated within compartments. Advanced applications of enzymatic cascade reactions with immobilized enzymes include enzymatic fuel cells and enzymatic nanoreactors, both for in vitro and possible in vivo applications. In this Review, we discuss some of the general principles of enzymatic reactions confined on surfaces, at interfaces, and inside small volumes. We also highlight the similarities and differences between the in vivo and in vitro cases and attempt to critically evaluate some of the necessary future steps to improve our fundamental understanding of these systems.