A theoretical model for input impedance of interstitial microwave antennas with choke

Microwave tissue ablation: biophysics, technology, and applications

Microwave ablation is an emerging treatment option for many cancers, cardiac arrhythmias, and other medical conditions. During treatment, microwaves are applied directly to tissues to produce rapid temperature elevations sufficient to produce immediate coagulative necrosis. The engineering design criteria for each application differ, with individual consideration for factors such as desired ablation zone size, treatment duration, and procedural invasiveness. Recent technological developments in applicator cooling, power control, and system optimization for specific applications promise to increase the utilization of microwave ablation in the future. This article reviews the basic biophysics of microwave tissue heating, provides an overview of the design and operation of current equipment, and outlines areas for future research.

Reduction of resonant RF heating in intravascular catheters using coaxial chokes

The incorporation of RF coils into the tips of intravascular devices has been shown to enable the localization of catheters and guidewires under MR guidance. Furthermore, such coils can be used for endoluminal imaging. The long cable required to connect the coil with the scanner input inadvertently acts as a dipole antenna which picks up RF energy from the body coil during transmit. Currents are induced on the cable which can lead to localized heating of surrounding tissue. Cables of various lengths were measured to determine if a resonance in the heating as a function of cable length could be found. Coaxial chokes with a length of lambda/4 were added to coaxial cables to reduce the amplitude of the currents induced on the cable shield. A 0.7-mm diameter triaxial cable, small enough to fit into a standard intravascular device, was developed and measured both with and without a coaxial choke. It is demonstrated that resonant heating does occur and that it can be significantly reduced by avoiding a resonant length of cable and by including coaxial chokes on the cable.

Relevance of a new impedance matching, or subtrap, method for the reduction of pain during hyperthermia

Capacitive heating is widely used in hyperthermic treatment of human malignancies. However, the pain on the body surface or thermoesthesia in the subcutaneous fatty layer may prevent an elevation of temperature in the tumors. Impedance matching is improved by a subtrap method entailing the application of two copper plates (10 x 850 x 0.06 mm) as a subtrap circuit to each of two capacitive electrodes. In a clinical trial the Tmax, Tave, Tmin for the subtrap method were all higher in comparison with those for the conventional technique (42.5 +/- 0.7 degrees C, 41.9 +/- 1.0 degrees C, 41.3 +/- 1.1 degrees C vs. 41.1 +/- 1.5 degrees C, 40.6 +/- 1.3 degrees C, 40.0 +/- 1.3 degrees C). Although the maximal radiofrequency (RF) power applied to patients was higher with the subtrap method (875 +/- 189 W vs. 763 +/- 200 W), the incidence of surface pain was reduced dramatically. It is concluded that the subtrap method substantially improves the RF capacitive heating of deep-seated tumors.