Analysis of IncF plasmids evolution: nucleotide sequence of an IncFIII replication region

The Facts and Family Secrets of Plasmids That Replicate via the Rolling-Circle Mechanism

Plasmids are self-replicative DNA elements that are transferred between bacteria. Plasmids encode not only antibiotic resistance genes but also adaptive genes that allow their hosts to colonize new niches. Plasmid transfer is achieved by conjugation (or mobilization), phage-mediated transduction, and natural transformation. Thousands of plasmids use the rolling-circle mechanism for their propagation (RCR plasmids). They are ubiquitous, have a high copy number, exhibit a broad host range, and often can be mobilized among bacterial species. Based upon the replicon, RCR plasmids have been grouped into several families, the best known of them being pC194 and pUB110 (Rep_1 family), pMV158 and pE194 (Rep_2 family), and pT181 and pC221 (Rep_trans family). Genetic traits of RCR plasmids are analyzed concerning (i) replication mediated by a DNA-relaxing initiator protein and its interactions with the cognate DNA origin, (ii) lagging-strand origins of replication, (iii) antibiotic resistance genes, (iv) mobilization functions, (v) replication control, performed by proteins and/or antisense RNAs, and (vi) the participating host-encoded functions. The mobilization functions include a relaxase initiator of transfer (Mob), an origin of transfer, and one or two small auxiliary proteins. There is a family of relaxases, the MOB_V family represented by plasmid pMV158, which has been revisited and updated. Family secrets, like a putative open reading frame of unknown function, are reported. We conclude that basic research on RCR plasmids is of importance, and our perspectives contemplate the concept of One Earth because we should incorporate bacteria into our daily life by diminishing their virulence and, at the same time, respecting their genetic diversity.

A degenerate primer MOB typing (DPMT) method to classify gamma-proteobacterial plasmids in clinical and environmental settings

Transmissible plasmids are responsible for the spread of genetic determinants, such as antibiotic resistance or virulence traits, causing a large ecological and epidemiological impact. Transmissible plasmids, either conjugative or mobilizable, have in common the presence of a relaxase gene. Relaxases were previously classified in six protein families according to their phylogeny. Degenerate primers hybridizing to coding sequences of conserved amino acid motifs were designed to amplify related relaxase genes from γ-Proteobacterial plasmids. Specificity and sensitivity of a selected set of 19 primer pairs were first tested using a collection of 33 reference relaxases, representing the diversity of γ-Proteobacterial plasmids. The validated set was then applied to the analysis of two plasmid collections obtained from clinical isolates. The relaxase screening method, which we call “Degenerate Primer MOB Typing” or DPMT, detected not only most known Inc/Rep groups, but also a plethora of plasmids not previously assigned to any Inc group or Rep-type.

Identification of bacterial plasmids based on mobility and plasmid population biology

Plasmids contain a backbone of core genes that remains relatively stable for long evolutionary periods, making sense to speak about plasmid species. The identification and characterization of the core genes of a plasmid species has a special relevance in the study of its epidemiology and modes of transmission. Besides, this knowledge will help to unveil the main routes that genes, for example antibiotic resistance (AbR) genes, use to travel from environmental reservoirs to human pathogens. Global dissemination of multiple antibiotic resistances and virulence traits by plasmids is an increasing threat for the treatment of many bacterial infectious diseases. To follow the dissemination of virulence and AbR genes, we need to identify the causative plasmids and follow their path from reservoirs to pathogens. In this review, we discuss how the existing diversity in plasmid genetic structures gives rise to a large diversity in propagation strategies. We would like to propose that, using an identification methodology based on plasmid mobility types, we can follow the propagation routes of most plasmids in Gammaproteobacteria, as well as their cargo genes, in complex ecosystems. Once the dissemination routes are known, designing antidissemination drugs and testing their efficacy will become feasible. We discuss in this review how the existing diversity in plasmid genetic structures gives rise to a large diversity in propagation strategies. We would like to propose that, by using an identification methodology based on plasmid mobility types, we can follow the propagation routes of most plasmids in ?-proteobacteria, as well as their cargo genes, in complex ecosystems.

Control of replication of plasmid R1: the intergenic region between copA and repA modulates the level of expression of repA

The RepA protein of plasmid R1 is rate-limiting for initiation of R1 replication. Its synthesis is mainly regulated by interactions of the antisense RNA, CopA, with the leader region of the RepA mRNA, CopT. This work describes the characterization of several mutants with sequence alterations in the intergenic region between the copA gene and the repA reading frame. The analysis showed that most of the mutations led both to a decrease in stability of maintenance of mini-R1 derivatives and to lowered repA expression assayed in translational repA-lacZ fusion constructs. Destruction of the copA gene and replacement of the upstream region by the tac promoter in the latter constructs indicated that these mutations per se alter the expression of repA. In addition, we show that particular mutations in this region can directly affect CopA-mediated control, either by changing the kinetics of interaction of CopA RNA with the RepA mRNA and/or by modifying the activity of the copA promoter. These data indicate the importance of the region analysed in the process that controls R1 replication.

DNA sequence and comparative genomics of pAPEC-O2-R, an avian pathogenic Escherichia coli transmissible R plasmid

In this study, a 101-kb IncF plasmid from an avian pathogenic Escherichia coli (APEC) strain (APEC O2) was sequenced and analyzed, providing the first completed APEC plasmid sequence. This plasmid, pAPEC-O2-R, has functional transfer and antimicrobial resistance-encoding regions. The resistance-encoding region encodes resistance to eight groups of antimicrobial agents, including silver and other heavy metals, quaternary ammonium compounds, tetracycline, sulfonamides, aminoglycosides, trimethoprim, and beta-lactam antimicrobial agents. This region of the plasmid is unique among previously described IncF plasmids in that it possesses a class 1 integron that harbors three gene cassettes and a heavy metal resistance operon. This region spans 33 kb and is flanked by the RepFII plasmid replicon and an assortment of plasmid maintenance genes. pAPEC-O2-R also contains a 32-kb transfer region that is nearly identical to that found in the E. coli F plasmid, rendering it transferable by conjugation to plasmid-less strains of bacteria, including an APEC strain, a fecal E. coli strain from an apparently healthy bird, a Salmonella enterica serovar Typhimurium strain, and a uropathogenic E. coli strain from humans. Differences in the G+C contents of individual open reading frames suggest that various regions of pAPEC-O2-R had dissimilar origins. The presence of pAPEC-O2-R-like plasmids that encode resistance to multiple antimicrobial agents and that are readily transmissible from APEC to other bacteria suggests the possibility that such plasmids may serve as a reservoir of resistance genes for other bacteria of animal and human health significance.

Four-way junctions in antisense RNA-mRNA complexes involved in plasmid replication control: a common theme?

In several groups of bacterial plasmids, antisense RNAs regulate copy number through inhibition of replication initiator protein synthesis. In plasmid R1, we have recently shown that the inhibitory complex between the antisense RNA (CopA) and its target mRNA (CopT) is characterized by the formation of two intermolecular helices, resulting in a four-way junction structure and a side-by-side helical alignment. Based on lead-induced cleavage and ribonuclease (RNase) V(1) probing combined with molecular modeling, a strikingly similar topology is supported for the complex formed between the antisense RNA (Inc) and mRNA (RepZ) of plasmid Col1b-P9. In particular, the position of the four-way junction and the location of divalent ion-binding site(s) indicate that the structural features of these two complexes are essentially the same in spite of sequence differences. Comparisons of several target and antisense RNAs in other plasmids further indicate that similar binding pathways are used to form the inhibitory antisense-target RNA complexes. Thus, in all these systems, the structural features of both antisense and target RNAs determine the topologically possible and kinetically favored pathway that is essential for efficient in vivo control.

Mosaic plasmids and mosaic replicons: evolutionary lessons from the analysis of genetic diversity in IncFII-related replicons

The alpha replicons of the multi-replicon plasmids pGSH500 and pLV1402 have been characterized by DNA sequence analysis. Analysis of the DNA sequence of a 3672 bp HIN:dIII fragment from pFDT100, which contains the pGSH500 alpha replicon, revealed similarity to a number of replicons belonging to, or related to, those of the IncFII family. The replicon region contains copA, tapA, repA and oriR, and replication initiation and termination sites are related to those from the IncFII replicon of R1. A copB gene was found to lie upstream of the HIN:dIII site in the parental plasmid pGSH500. Downstream of oriR, a 707 bp region shows 72.6% identity to a region of the Escherichia coli chromosome at 43.3', suggesting this region of pGSH500 may have been incorporated into the plasmid during a past chromosomal recombination event. Oligonucleotide primers homologous to consensus regions in the copB and repA genes, and the oriR regions from a number of IncFII-related replicons were used to amplify replication regions from pLV1402. Analysis of the amplified regions has shown the presence of copB, copA, tapA and repA genes. Phylogenetic analysis of Rep protein sequences from the RepFIIA family of antisense-control-regulated replicons revealed the presence of three distinct subgroups of Rep proteins. Comparative analysis of DNA and protein sequences from members of the RepFIIA family provides evidence supporting the roles of both non-selective divergence in co-integrate (multi-replicon) plasmids and Chi-mediated-recombination in replicon evolution, and in particular, that such processes may have been widespread in the evolution of the RepFIIA family.

Comparative analysis of the replicon regions of eleven ColE2-related plasmids

The incA gene product of ColE2-P9 and ColE3-CA38 plasmids is an antisense RNA that regulates the production of the plasmid-coded Rep protein essential for replication. The Rep protein specifically binds to the origin and synthesizes a unique primer RNA at the origin. The IncB incompatibility is due to competition for the Rep protein among the origins of the same binding specificity. We localized the regions sufficient for autonomous replication of 15 ColE plasmids related to ColE2-P9 and ColE3-CA38 (ColE2-related plasmids), analyzed their incompatibility properties, and determined the nucleotide sequences of the replicon regions of 9 representative plasmids. The results suggest that all of these plasmids share common mechanisms for initiation of DNA replication and its control. Five IncA specificity types, 4 IncB specificity types, and 9 of the 20 possible combinations of the IncA and IncB types were found. The specificity of interaction of the Rep proteins and the origins might be determined by insertion or deletion of single nucleotides and substitution of several nucleotides at specific sites in the origins and by apparently corresponding insertion or deletion and substitution of amino acid sequences at specific regions in the C-terminal portions of the Rep proteins. For plasmids of four IncA specificity types, the nine-nucleotide sequences at the loop regions of the stem-loop structures of antisense RNAs are identical, suggesting an evolutionary significance of the sequence. The mosaic structures of the replicon regions with homologous and nonhomologous segments suggest that some of them were generated by exchanging functional parts through homologous recombination.

Characterization and nucleotide sequence of the oriT-traM-finP region of the IncFVII plasmid pSU233

By hybridizing the IncFVII haemolytic plasmid pSU233 with a probe containing the origin of transfer of the IncFII plasmid R1, we isolated a 1.9 kb BglII fragment containing at least the origin of transfer (oriT), and the genes traM and finP. Functional complementation analysis of deletion derivatives was used to map the origin of transfer. We also determined the nucleotide sequence of traM and finP. Comparison with similar regions of several plasmids, also belonging to the Rep-FIIA family, revelaed that pSU233 resembles the F plasmid by very close. The homology is not evenly distributed along this region, but clustered into homologous regions (TraZb-oriT, TraMb-oriT and traM separated by non-homologous regions (TraYb-oriT, finP). This organization resembles that reported for the replication region and also suggests evolution by exchange of modules. In addition, the nucleotide sequence of finP is different from those previously described for other IncF plasmids and constitutes a new allele, which we have denominated allele VI.

Regulation of replication of plasmid R1: an analysis of the intergenic region between copA and repA

The synthesis of the rate-limiting RepA replication initiator protein of plasmid R1 is negatively controlled by an antisense RNA, CopA. The regulation is posttranscriptional and involves an inhibitory effect on RepA translation mediated by the binding of CopA to its target (CopT) in the leader region of the RepA mRNA. The evolutionary conservation of the intergenic region between the copA gene and the repA reading frame among plasmids related to R1 may be indicative of an important function in this regulation. One possibility is that sequences/structures in this region might be required for the presumed distal effect of CopAQCopT binding. We have performed a mutational analysis of this region, starting with a mutant repA-lacZ fusion plasmid that shows decreased RepA-LacZ synthesis compared to a wild-type construct, and have identified five compensatory mutations that increase repA-lacZ expression. Two of these were single base-pair substitutions in the copA promoter leading to a decrease in CopA transcription. The other three mutations increased RepA synthesis in the presence as well as in the absence of functional CopA. Reconstructed plasmids carrying these mutations--in conjunction with the original down-mutation or in an otherwise wild-type background--show the expected increase in copy number. The effect of two of these mutations is consistent with the destabilization of a putative secondary structure which may be responsible for the normally low translation rate of the RepA reading frame. The implications of the types of mutations found in this study, as well as the absence of other classes of mutations, are discussed in terms of alternative possible models of CopA-mediated inhibition of RepA synthesis.