Sequence analysis of a gene cluster encoding cellulases from Clostridium cellulolyticum

Function analysis of 5'-UTR of the cellulosomal xyl-doc cluster in Clostridium papyrosolvens

BACKGROUND

Anaerobic, mesophilic, and cellulolytic Clostridium papyrosolvens produces an efficient cellulolytic extracellular complex named cellulosome that hydrolyzes plant cell wall polysaccharides into simple sugars. Its genome harbors two long cellulosomal clusters: cip-cel operon encoding major cellulosome components (including scaffolding) and xyl-doc gene cluster encoding hemicellulases. Compared with works on cip-cel operon, there are much fewer studies on xyl-doc mainly due to its rare location in cellulolytic clostridia. Sequence analysis of xyl-doc revealed that it harbors a 5' untranslated region (5'-UTR) which potentially plays a role in the regulation of downstream gene expression. Here, we analyzed the function of 5'-UTR of xyl-doc cluster in C. papyrosolvens in vivo via transformation technology developed in this study.

RESULTS

In this study, we firstly developed an electrotransformation method for C. papyrosolvens DSM 2782 before the analysis of 5'-UTR of xyl-doc cluster. In the optimized condition, a field with an intensity of 7.5-9.0 kV/cm was applied to a cuvette (0.2 cm gap) containing a mixture of plasmid and late cell suspended in exponential phase to form a 5 ms pulse in a sucrose-containing buffer. Afterwards, the putative promoter and the 5'-UTR of xyl-doc cluster were determined by sequence alignment. It is indicated that xyl-doc possesses a long conservative 5'-UTR with a complex secondary structure encompassing at least two perfect stem-loops which are potential candidates for controlling the transcriptional termination. In the last step, we employed an oxygen-independent flavin-based fluorescent protein (FbFP) as a quantitative reporter to analyze promoter activity and 5'-UTR function in vivo. It revealed that 5'-UTR significantly blocked transcription of downstream genes, but corn stover can relieve its suppression.

CONCLUSIONS

In the present study, our results demonstrated that 5'-UTR of the cellulosomal xyl-doc cluster blocks the transcriptional activity of promoter. However, some substrates, such as corn stover, can relieve the effect of depression of 5'-UTR. Thus, it is speculated that 5'-UTR of xyl-doc was a putative riboswitch to regulate the expression of downstream cellulosomal genes, which is helpful to understand the complex regulation of cellulosome.

Methods for Discovery of Novel Cellulosomal Cellulases Using Genomics and Biochemical Tools

Cell wall degradation by cellulases is extensively explored owing to its potential contribution to biofuel production. The cellulosome is an extracellular multienzyme complex that can degrade the plant cell wall very efficiently, and cellulosomal enzymes are therefore of great interest. The cellulosomal cellulases are defined as enzymes that contain a dockerin module, which can interact with a cohesin module contained in multiple copies in a noncatalytic protein, termed scaffoldin. The assembly of the cellulosomal cellulases into the cellulosomal complex occurs via specific protein-protein interactions. Cellulosome systems have been described initially only in several anaerobic cellulolytic bacteria. However, owing to ongoing genome sequencing and metagenomic projects, the discovery of novel cellulosome-producing bacteria and the description of their cellulosomal genes have dramatically increased in the recent years. In this chapter, methods for discovery of novel cellulosomal cellulases from a DNA sequence by bioinformatics and biochemical tools are described. Their biochemical characterization is also described, including both the enzymatic activity of the putative cellulases and their assembly into mature designer cellulosomes.

LacI Transcriptional Regulatory Networks in Clostridium thermocellum DSM1313

Organisms regulate gene expression in response to the environment to coordinate metabolic reactions. Clostridium thermocellum expresses enzymes for both lignocellulose solubilization and its fermentation to produce ethanol. One LacI regulator termed GlyR3 in C. thermocellum ATCC 27405 was previously identified as a repressor of neighboring genes with repression relieved by laminaribiose (a β-1,3 disaccharide). To better understand the three C. thermocellum LacI regulons, deletion mutants were constructed using the genetically tractable DSM1313 strain. DSM1313 lacI genes Clo1313_2023, Clo1313_0089, and Clo1313_0396 encode homologs of GlyR1, GlyR2, and GlyR3 from strain ATCC 27405, respectively. Growth on cellobiose or pretreated switchgrass was unaffected by any of the gene deletions under controlled-pH fermentations. Global gene expression patterns from time course analyses identified glycoside hydrolase genes encoding hemicellulases, including cellulosomal enzymes, that were highly upregulated (5- to 100-fold) in the absence of each LacI regulator, suggesting that these were repressed under wild-type conditions and that relatively few genes were controlled by each regulator under the conditions tested. Clo1313_2022, encoding lichenase enzyme LicB, was derepressed in a ΔglyR1 strain. Higher expression of Clo1313_1398, which encodes the Man5A mannanase, was observed in a ΔglyR2 strain, and α-mannobiose was identified as a probable inducer for GlyR2-regulated genes. For the ΔglyR3 strain, upregulation of the two genes adjacent to glyR3 in the celC-glyR3-licA operon was consistent with earlier studies. Electrophoretic mobility shift assays have confirmed LacI transcription factor binding to specific regions of gene promoters.IMPORTANCE Understanding C. thermocellum gene regulation is of importance for improved fundamental knowledge of this industrially relevant bacterium. Most LacI transcription factors regulate local genomic regions; however, a small number of those genes encode global regulatory proteins with extensive regulons. This study indicates that there are small specific C. thermocellum LacI regulons. The identification of LacI repressor activity for hemicellulase gene expression is a key result of this work and will add to the small body of existing literature on the area of gene regulation in C. thermocellum.

Transcriptomic and proteomic analyses of core metabolism in Clostridium termitidis CT1112 during growth on α-cellulose, xylan, cellobiose and xylose

Background

Clostridium termitidis CT1112 is an anaerobic, Gram-positive, mesophilic, spore-forming, cellulolytic bacterium, originally isolated from the gut of a wood feeding termite Nasusitermes lujae. It has the ability to hydrolyze both cellulose and hemicellulose, and ferment the degradation products to acetate, formate, ethanol, lactate, H₂, and CO₂. It is therefore ges in gene and gene product expression during growth of C. termitidis on cellobiose, xylose, xylan, and α–cellulose.

Results

Correlation of transcriptome and proteome data with growth and fermentation profiles identified putative carbon-catabolism pathways in C. termitidis. The majority of the proteins associated with central metabolism were detected in high abundance. While major differences were not observed in gene and gene-product expression for enzymes associated with metabolic pathways under the different substrate conditions, xylulokinase and xylose isomerase of the pentose phosphate pathway were found to be highly up-regulated on five carbon sugars compared to hexoses. In addition, genes and gene-products associated with a variety of cellulosome and non-cellulosome associated CAZymes were found to be differentially expressed. Specifically, genes for cellulosomal enzymes and components were highly expressed on α–cellulose, while xylanases and glucosidases were up-regulated on 5 carbon sugars with respect to cellobiose. Chitinase and cellobiophosphorylases were the predominant CAZymes expressed on cellobiose. In addition to growth on xylan, the simultaneous consumption of two important lignocellulose constituents, cellobiose and xylose was also demonstrated.

Conclusion

There are little changes in core-metabolic pathways under the different carbon sources compared. The most significant differences were found to be associated with the CAZymes, as well as specific up regulation of some key components of the pentose phosphate pathway in the presence of xylose and xylan. This study has enhanced our understanding of the physiology and metabolism of C. termitidis, and provides a foundation for future studies on metabolic engineering to optimize biofuel production from natural biomass.

Electronic supplementary material

The online version of this article (doi:10.1186/s12866-016-0711-x) contains supplementary material, which is available to authorized users.

Enzyme Systems of Anaerobes for Biomass Conversion

Biofuels from abundantly available cellulosic biomass are an attractive alternative to current petroleum-based fuels (fossil fuels). Although several strategies exist for commercial production of biofuels, conversion of biomass to biofuels via consolidated bioprocessing offers the potential to reduce production costs and increase processing efficiencies. In consolidated bioprocessing (CBP), enzyme production, cellulose hydrolysis, and fermentation are all carried out in a single-step by microorganisms that efficiently employ a multitude of intricate enzymes which act synergistically to breakdown cellulose and its associated cell wall components. Various strategies employed by anaerobic cellulolytic bacteria for biomass hydrolysis are described in this chapter. In addition, the regulation of CAZymes, the role of "omics" technologies in assessing lignocellulolytic ability, and current strategies for improving biomass hydrolysis for optimum biofuel production are highlighted.

Comparative analysis of carbohydrate active enzymes in Clostridium termitidis CT1112 reveals complex carbohydrate degradation ability

Clostridium termitidis strain CT1112 is an anaerobic, gram positive, mesophilic, cellulolytic bacillus isolated from the gut of the wood-feeding termite, Nasutitermes lujae. It produces biofuels such as hydrogen and ethanol from cellulose, cellobiose, xylan, xylose, glucose, and other sugars, and therefore could be used for biofuel production from biomass through consolidated bioprocessing. The first step in the production of biofuel from biomass by microorganisms is the hydrolysis of complex carbohydrates present in biomass. This is achieved through the presence of a repertoire of secreted or complexed carbohydrate active enzymes (CAZymes), sometimes organized in an extracellular organelle called cellulosome. To assess the ability and understand the mechanism of polysaccharide hydrolysis in C. termitidis, the recently sequenced strain CT1112 of C. termitidis was analyzed for both CAZymes and cellulosomal components, and compared to other cellulolytic bacteria. A total of 355 CAZyme sequences were identified in C. termitidis, significantly higher than other Clostridial species. Of these, high numbers of glycoside hydrolases (199) and carbohydrate binding modules (95) were identified. The presence of a variety of CAZymes involved with polysaccharide utilization/degradation ability suggests hydrolysis potential for a wide range of polysaccharides. In addition, dockerin-bearing enzymes, cohesion domains and a cellulosomal gene cluster were identified, indicating the presence of potential cellulosome assembly.

Regulation of cel genes of C. cellulolyticum: identification of GlyR2, a transcriptional regulator regulating cel5D gene expression

Transcription and expression regulation of some individual cel genes (cel5A, cel5I, cel5D and cel44O) of Clostridium cellulolyticum were investigated. Unlike the cip-cel operon, these genes are transcribed as monocistronic units of transcription, except cel5D. The location of the transcription initiation sites was determined using RT-PCR and the mRNA 5′-end extremities were detected using primer extension experiments. Similarly to the cip-cel operon, cel5A and cel5I expressions are regulated by a carbon catabolite repression mechanism, whereas cel44O and cel5D expressions do not seem to be submitted to this regulation. The role of the putative transcriptional regulator GlyR2 in the regulation of cel5D expression was investigated. The recombinant protein GlyR2 was produced and was shown to bind in vitro to the cel5D and glyR2 promoter regions, suggesting that besides regulating its own expression, GlyR2 may regulate cel5D expression. To test this hypothesis in vivo, an insertional glyR2 mutant was generated and the effect of this disruption on cel5D expression was evaluated. Levels of cel5D mRNAs in the mutant were 16 fold lower than that of the wild-type strain suggesting that GlyR2 acts as an activator of cel5D expression.

From cellulosomes to cellulosomics

Cellulosomes are intricate multienzyme systems produced by several cellulolytic bacteria, the first example of which was discovered in the anaerobic thermophilic bacterium, Clostridium thermocellum. Cellulosomes are designed for efficient degradation of plant cell wall polysaccharides, notably cellulose--the most abundant renewable polymer on earth. The component parts of the multicomponent complex are integrated by virtue of a unique family of integrating modules, the cohesins and the dockerins, whose distribution and specificity dictate the overall cellulosome architecture. A full generation of research has elapsed since the original publications that documented the cellulosome concept. In this review, we provide a personal account on the discovery process, while describing how divergent cellulosome systems were identified and investigated, culminating in the collaboration of several labs worldwide to tackle together the challenging field of cellulosome genomics and metagenomics.

Transcriptional analysis of the cip-cel gene cluster from Clostridium cellulolyticum

Twelve genes encoding key components of Clostridium cellulolyticum cellulosomes are clustered. Among them, the first, second, and fifth genes encode the assembly factor CipC and the two major cellulases Cel48F and Cel9E, respectively. Cellulolytic clones were selected from the noncellulolytic cipC insertional mutant trans-complemented with a cipC expression vector, in which one homologous recombination event between the 3' end of the chromosomal cipC gene and the plasmidic cipC gene has restored the cluster continuity. The absence of the enzymes encoded by the cluster in the cipC mutant was thus only due to a strong polar effect, indicating that all genes were transcriptionally linked. Two large transcripts were detected in cellulose-grown cells by Northern hybridization: a 14-kb messenger which carries the cipC-cel48F-cel8C-cel9G-cel9E coding sequences and, in a smaller amount, a 12-kb messenger which carries the genes located in the 3' part of the cluster. Four smaller transcripts were found in large amounts: a cipC-cel48F bicistronic one and three monocistronic ones, cipC, cel48F, and cel9E. The cipC-cel48F and cel48F messengers were shown to be stable. Analysis by reverse transcription-PCR suggested transcriptional linkage of all of the open reading frames. The production of a primary very large transcript covering the entire cluster was hypothesized. Primer extension analysis has identified two putative transcriptional start sites located 638/637 and 194 nucleotides upstream of the cipC translational start. The processing of the primary transcript would lead to the production of several secondary messengers displaying different stabilities, contributing to fine tuning of expression of individual genes of the operon.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

Action of designer cellulosomes on homogeneous versus complex substrates: controlled incorporation of three distinct enzymes into a defined trifunctional scaffoldin

In recent work, we reported the self-assembly of a comprehensive set of defined "bifunctional" chimeric cellulosomes. Each complex contained the following: (i) a chimeric scaffoldin possessing a cellulose-binding module and two cohesins of divergent specificity and (ii) two cellulases, each bearing a dockerin complementary to one of the divergent cohesins. This approach allowed the controlled integration of desired enzymes into a multiprotein complex of predetermined stoichiometry and topology. The observed enhanced synergy on recalcitrant substrates by the bifunctional designer cellulosomes was ascribed to two major factors: substrate targeting and proximity of the two catalytic components. In the present work, the capacity of the previously described chimeric cellulosomes was amplified by developing a third divergent cohesin-dockerin device. The resultant trifunctional designer cellulosomes were assayed on homogeneous and complex substrates (microcrystalline cellulose and straw, respectively) and found to be considerably more active than the corresponding free enzyme or bifunctional systems. The results indicate that the synergy between two prominent cellulosomal enzymes (from the family-48 and -9 glycoside hydrolases) plays a crucial role during the degradation of cellulose by cellulosomes and that one dominant family-48 processive endoglucanase per complex is sufficient to achieve optimal levels of synergistic activity. Furthermore cooperation within a cellulosome chimera between cellulases and a hemicellulase from different microorganisms was achieved, leading to a trifunctional complex with enhanced activity on a complex substrate.

Towards designer cellulosomes in Clostridia: mannanase enrichment of the cellulosomes produced by Clostridium cellulolyticum

The man5K gene of Clostridium cellulolyticum was cloned and overexpressed in Escherichia coli. This gene encodes a 424-amino-acid preprotein composed of an N-terminal leader peptide, followed by a dockerin module and a C-terminal catalytic module belonging to family 5 of the glycosyl hydrolases. Mature Man5K displays 62% identity with ManA from Clostridium cellulovorans. Two forms of the protein were purified from E. coli; one form corresponds to the full-length enzyme (45 kDa), and a truncated form (39 kDa) lacks the N-terminal dockerin module. Both forms exhibit the same typical family 5 mannanase substrate preference; they are very active with the galactomannan locust bean gum, and the more galacto-substituted guar gum molecules are degraded less. The truncated form, however, displays fourfold-higher activity with galactomannans than the full-length enzyme. Man5K was successfully overproduced in C. cellulolyticum by using expression vectors. The trans-produced protein was found to be incorporated into the cellulosomes and became one of the major enzymatic components. Modified cellulosomes displayed 20-fold-higher specific activities than control fractions on galactomannan substrates, whereas the specific activity on crystalline cellulose was reduced by 20%. This work clearly showed that the composition of the cellulosomes is obviously regulated by the relative amounts of the enzymes produced and that this composition can be engineered in clostridia by structural gene cloning.

A novel Acetivibrio cellulolyticus anchoring scaffoldin that bears divergent cohesins

Sequencing of a cellulosome-integrating gene cluster in Acetivibrio cellulolyticus was completed. The cluster contains four tandem scaffoldin genes (scaA, scaB, scaC, and scaD) bounded upstream and downstream, respectively, by a presumed cellobiose phosphorylase and a nucleotide methylase. The sequences and properties of scaA, scaB, and scaC were reported previously, and those of scaD are reported here. The scaD gene encodes an 852-residue polypeptide that includes a signal peptide, three cohesins, and a C-terminal S-layer homology (SLH) module. The calculated molecular weight of the mature ScaD is 88,960; a 67-residue linker segment separates cohesins 1 and 2, and two approximately 30-residue linkers separate cohesin 2 from 3 and cohesin 3 from the SLH module. The presence of an SLH module in ScaD indicates its role as an anchoring protein. The first two ScaD cohesins can be classified as type II, similar to the four cohesins of ScaB. Surprisingly, the third ScaD cohesin belongs to the type I cohesins, like the seven ScaA cohesins. ScaD is the first scaffoldin to be described that contains divergent types of cohesins as integral parts of the polypeptide chain. The recognition properties among selected recombinant cohesins and dockerins from the different scaffoldins of the gene cluster were investigated by affinity blotting. The results indicated that the divergent types of ScaD cohesins also differ in their preference of dockerins. ScaD thus plays a dual role, both as a primary scaffoldin, capable of direct incorporation of a single dockerin-borne enzyme, and as a secondary scaffoldin that anchors the major primary scaffoldin, ScaA and its complement of enzymes to the cell surface.

Purification and characterization of chitosanase from Bacillus sp. strain KCTC 0377BP and its application for the production of chitosan oligosaccharides

For the enzymatic production of chitosan oligosaccharides from chitosan, a chitosanase-producing bacterium, Bacillus sp. strain KCTC 0377BP, was isolated from soil. The bacterium constitutively produced chitosanase in a culture medium without chitosan as an inducer. The production of chitosanase was increased from 1.2 U/ml in a minimal chitosan medium to 100 U/ml by optimizing the culture conditions. The chitosanase was purified from a culture supernatant by using CM-Toyopearl column chromatography and a Superose 12HR column for fast-performance liquid chromatography and was characterized according to its enzyme properties. The molecular mass of the enzyme was estimated to be 45 kDa by means of sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The enzyme demonstrated bifunctional chitosanase-glucanase activities, although it showed very low glucanase activity, with less than 3% of the chitosanase activity. Activity of the enzyme increased with an increase of the degrees of deacetylation (DDA) of the chitosan substrate. However, the enzyme still retained 72% of its relative activity toward the 39% DDA of chitosan, compared with the activity of the 94% DDA of chitosan. The enzyme produced chitosan oligosaccharides from chitosan, ranging mainly from chitotriose to chitooctaose. By controlling the reaction time and by monitoring the reaction products with gel filtration high-performance liquid chromatography, chitosan oligosaccharides with a desired oligosaccharide content and composition were obtained. In addition, the enzyme was efficiently used for the production of low-molecular-weight chitosan and highly acetylated chitosan oligosaccharides. A gene (csn45) encoding chitosanase was cloned, sequenced, and compared with other functionally related genes. The deduced amino acid sequence of csn45 was dissimilar to those of the classical chitosanase belonging to glycoside hydrolase family 46 but was similar to glucanases classified with glycoside hydrolase family 8.

Cellulolysis is severely affected in Clostridium cellulolyticum strain cipCMut1

Progress towards understanding the molecular basis of cellulolysis by Clostridium cellulolyticm was obtained through the study of the first cellulolysis defective mutant strain, namely cipCMut1. In this mutant, a 2 659 bp insertion element, disrupts the cipC gene at the sequence encoding the seventh cohesin of the scaffoldin CipC. cipC is the first gene in a large 'cel' gene cluster, encoding several enzymatic subunits of the cellulosomes, including the processive cellulase Cel48F, which is the major component. Physiological and biochemical studies showed that the mutant strain was affected in cellulosome synthesis and severely impaired in its ability to degrade crystalline cellulose. It produced small amounts of a truncated CipC protein (P120), which had functional cohesin domains and assembled complexes which did not contain any of the enzymes encoded by genes of the 'cel' cluster. The mutant cellulolytic system was mainly composed of three proteins designated P98, P105 and P125. Their N-termini did not match any of the known cellulase sequences from C. cellulolyticum. A large amount of entire CipC produced in the cipCMut1 strain by trans-complementation with plasmid pSOScipC did not restore the cellulolytic phenotype, in spite of the assembly of a larger amount of complexes. The complexes produced in the mutant and complemented strains contained at least 12 different dockerin-containing proteins encoded by genes located outside of the 'cel' cluster. The disturbances observed in the mutant and trans-complemented strains were the result of a strong polar effect resulting from the cipC gene disruption. In conclusion, this study provided genetic evidence that the cellulases encoded by the genes located in the 'cel' cluster are essential for the building of cellulosomes efficient in crystalline cellulose degradation.

Use of antisense RNA to modify the composition of cellulosomes produced by Clostridium cellulolyticum

The enzymatic composition of the cellulosomes produced by Clostridium cellulolyticum was modified by inhibiting the synthesis of Cel48F that is the major cellulase of the cellulosomes. The strain ATCC 35319 (pSOSasrF) was developed to over-produce a 469 nucleotide-long antisense-RNA (asRNA) directed against the ribosome-binding site region and the beginning of the coding region of the cel48F mRNAs. The cellulolytic system secreted by the asRNA-producing strain showed a markedly lower amount of Cel48F, compared to the control strain transformed with the empty plasmid (pSOSzero). This was correlated with a 30% decrease of the specific activity of the cellulolytic system on Avicel cellulose, indicating that Cel48F plays an important role in the recalcitrant cellulose degradation. However, only minor effects were observed on the growth parameters on cellulose. In both transformant strains, cellulosome production was found to be reduced and two unknown proteins (P105 and P98) appeared as major components of their cellulolytic systems. These proteins did not contain any dockerin domain and were shown to be not included into the cellulosomes; they are expected to participate to the non-cellulosomal cellulolytic system of C. cellulolyticum.

Architecture of the Bacteroides cellulosolvens cellulosome: description of a cell surface-anchoring scaffoldin and a family 48 cellulase

A large gene downstream of the primary Bacteroides cellulosolvens cellulosomal scaffoldin (cipBc, now renamed scaA) was sequenced. The gene, termed scaB, contained an N-terminal leader peptide followed by 10 type I cohesins, an "X" domain of unknown structure and function, and a C-terminal S-layer homology (SLH) surface-anchoring module. In addition, a previously identified gene in a different part of the genome, encoding for a dockerin-borne family 48 cellulosomal glycoside hydrolase (Cel48), was sequenced completely, and a putative cellulosome-related family 9 glycosyl hydrolase was detected. Recombinant fusion proteins, comprising dockerins derived from either the ScaA scaffoldin or Cel48, were overexpressed. Their interaction with ScaA and ScaB cohesins was examined by immunoassay. The results indicated that the ScaB type I cohesin of the new anchoring protein binds selectively to the ScaA dockerin, whereas the Cel48 dockerin binds specifically to the type II ScaA cohesin 5. Thus, by virtue of the 11 type II ScaA cohesins and the 10 type I ScaB cohesins, the relatively simple two-component cellulosome-integrating complex would potentially incorporate 110 enzyme molecules onto the cell surface via the ScaB SLH module. Compared to previously described cellulosome systems, the apparent roles of the B. cellulosolvens cohesins are reversed, in that the type II cohesins are located on the enzyme-binding primary scaffoldin, whereas the type I cohesins are located on the anchoring scaffoldin. The results underscore the extensive diversity in the supramolecular architecture of cellulosome systems in nature.

The cellulosomes: multienzyme machines for degradation of plant cell wall polysaccharides

The discrete multicomponent, multienzyme cellulosome complex of anaerobic cellulolytic bacteria provides enhanced synergistic activity among the different resident enzymes to efficiently hydrolyze intractable cellulosic and hemicellulosic substrates of the plant cell wall. A pivotal noncatalytic subunit called scaffoldin secures the various enzymatic subunits into the complex via the cohesin-dockerin interaction. The specificity characteristics and tenacious binding between the scaffoldin-based cohesin modules and the enzyme-borne dockerin domains dictate the supramolecular architecture of the cellulosome. The diversity in cellulosome architecture among the known cellulosome-producing bacteria is manifest in the arrangement of their genes in either multiple-scaffoldin or enzyme-linked clusters on the genome. The recently described three-dimensional crystal structure of the cohesin-dockerin heterodimer sheds light on the critical amino acids that contribute to this high-affinity protein-protein interaction. In addition, new information regarding the regulation of cellulosome-related genes, budding genetic tools, and emerging genomics of cellulosome-producing bacteria promises new insight into the assembly and consequences of the multienzyme complex.

A rhamnogalacturonan lyase in the Clostridium cellulolyticum cellulosome

Clostridium cellulolyticum secretes large multienzymatic complexes with plant cell wall-degrading activities named cellulosomes. Most of the genes encoding cellulosomal components are located in a large gene cluster: cipC-cel48F-cel8C-cel9G-cel9E-orfX-cel9H-cel9J-man5K-cel9M. Downstream of the cel9M gene, a new open reading frame was discovered and named rgl11Y. Amino acid sequence analysis indicates that this gene encodes a multidomain pectinase, Rgl11Y, containing an N-terminal signal sequence, a catalytic domain belonging to family 11 of the polysaccharide lyases, and a C-terminal dockerin domain. The present report describes the biochemical characterization of a recombinant form of Rgl11Y. Rgl11Y cleaves the alpha-L-Rhap-(1-->4)-alpha-D-GalpA glycosidic bond in the backbone of rhamnogalacturonan I (RGI) via a beta-elimination mechanism. Its specific activity on potato pectic galactan and rhamnogalacturonan was found to be 28 and 3.6 IU/mg, respectively, indicating that Rgl11Y requires galactan decoration of the RGI backbone. The optimal pH of Rgl11Y is 8.5 and calcium is required for its activity. Rgl11Y was shown to be incorporated in the C. cellulolyticum cellulosome through a typical cohesin-dockerin interaction. Rgl11Y from C. cellulolyticum is the first cellulosomal rhamnogalacturonase characterized.

X-Ray crystal structure of the multidomain endoglucanase Cel9G from Clostridium cellulolyticum complexed with natural and synthetic cello-oligosaccharides

Complete cellulose degradation is the first step in the use of biomass as a source of renewable energy. To this end, the engineering of novel cellulase activity, the activity responsible for the hydrolysis of the beta-1,4-glycosidic bonds in cellulose, is a topic of great interest. The high-resolution X-ray crystal structure of a multidomain endoglucanase from Clostridium cellulolyticum has been determined at a 1.6-A resolution. The endoglucanase, Cel9G, is comprised of a family 9 catalytic domain attached to a family III(c) cellulose-binding domain. The two domains together form a flat platform onto which crystalline cellulose is suggested to bind and be fed into the active-site cleft for endolytic hydrolysis. To further dissect the structural basis of cellulose binding and hydrolysis, the structures of Cel9G in the presence of cellobiose, cellotriose, and a DP-10 thio-oligosaccharide inhibitor were resolved at resolutions of 1.7, 1.8, and 1.9 A, respectively.

ISCce1 and ISCce2, two novel insertion sequences in Clostridium cellulolyticum

Two new insertion sequences, ISCce1 and ISCce2, were found to be inserted into the cipC gene of spontaneous mutants of Clostridium cellulolyticum. In these insertional mutants, the cipC gene was disrupted either by ISCce1 alone or by both ISCce1 and ISCce2. ISCce1 is 1,292 bp long and has one open reading frame. The open reading frame encodes a putative 348-amino-acid protein with significant levels of identity with putative proteins having unknown functions and with some transposases belonging to the IS481 and IS3 families. Imperfect 23-bp inverted repeats were found near the extremities of ISCce1. ISCce2 is 1,359 bp long, carries one open reading frame, and has imperfect 35-bp inverted repeats at its termini. The open reading frame encodes a putative 398-amino-acid protein. This protein shows significant levels of identity with transposases belonging to the IS256 family. Upon transposition, both ISCce1 and ISCce2 generate 8-bp direct repeats of the target sequence, but no consensus sequences could be identified at either insertion site. ISCce1 is copied at least 20 times in the genome, as assessed by Southern blot analysis. ISCce2 was found to be mostly inserted into ISCce1. In addition, as neither of the elements was detected in seven other Clostridium species, we concluded that they may be specific to the C. cellulolyticum strain used.

Identification of the cellulose-binding and the cell wall-binding domains of Eubacterium cellulosolvens 5 cellulose-binding protein A (CBPA)

The cellulose-binding domain (CBD) and the cell wall-binding domain (CWBD) of Eubacterium cellulosolvens 5 cellulose-binding protein A (CBPA) have been determined. The gene (cbpA) encoding CBPA and its derivatives were expressed in Escherichia coli. We were able to obtain the eight recombinant proteins and examine for their cellulose-binding ability, cell wall-binding ability and carboxymethyl cellulase (CMCase) activity. Since five recombinant proteins, which contain the unknown domain (UD-2) located between two linker-like regions of CBPA, bound to cellulose, this region has been identified as the CBD. The CBD did not show a significant sequence similarity with any other CBDs. Moreover, the N-terminal region of CBPA showed a significant sequence similarity with a catalytic domain of glycosyl hydrolase family 9, and the recombinant proteins containing the region showed CMCase activity. Since the UD-3, which is located in the C-terminal region of CBPA, bound to the cell walls of E. cellulosolvens 5, the region has been identified as the CWBD. However, the CWBD did not show a significant sequence similarity with any other proteins previously reported.

Biochemical and genetic properties of Paenibacillus glycosyl hydrolase having chitosanase activity and discoidin domain

Cells of "Paenibacillus fukuinensis" D2 produced chitosanase into surrounding medium, in the presence of colloidal chitosan or glucosamine. The gene of this enzyme was cloned, sequenced, and subjected to site-directed mutation and deletion analyses. The nucleotide sequence indicated that the chitosanase was composed of 797 amino acids and its molecular weight was 85,610. Unlike conventional family 46 chitosanases, the enzyme has family 8 glycosyl hydrolase catalytic domain, at the amino-terminal side, and discoidin domain at the carboxyl-terminal region. Expression of the cloned gene in Escherichia coli revealed beta-1,4-glucanase function, besides chitosanase activity. Analyses by zymography and immunoblotting suggested that the active enzyme was, after removal of signal peptide, produced from inactive 81-kDa form by proteolysis at the carboxyl-terminal region. Replacements of Glu(115) and Asp(176), highly conserved residues in the family 8 glycosylase region, with Gln and Asn caused simultaneous loss of chitosanase and glucanase activities, suggesting that these residues formed part of the catalytic site. Truncation experiments demonstrated indispensability of an amino-terminal region spanning 425 residues adjacent to the signal peptide.

Cel9M, a new family 9 cellulase of the Clostridium cellulolyticum cellulosome

A new cellulosomal protein from Clostridium cellulolyticum Cel9M was characterized. The protein contains a catalytic domain belonging to family 9 and a dockerin domain. Cel9M is active on carboxymethyl cellulose, and the hydrolysis of this substrate is accompanied by a decrease in viscosity. Cel9M has a slight, albeit significant, activity on both Avicel and bacterial microcrystalline cellulose, and the main soluble sugar released is cellotetraose. Saccharification of bacterial microcrystalline cellulose by Cel9M in association with two other family 9 enzymes from C. cellulolyticum, namely, Cel9E and Cel9G, was measured, and it was found that Cel9M acts synergistically with Cel9E. Complexation of Cel9M with the mini-CipC1 containing the cellulose binding domain, the X2 domain, and the first cohesin domain of the scaffoldin CipC of the bacterium did not significantly increase the hydrolysis of Avicel and bacterial microcrystalline cellulose.

Temporal secretion of a multicellulolytic system in Myxobacter sp. AL-1. Molecular cloning and heterologous expression of cel9 encoding a modular endocellulase clustered in an operon with cel48, an exocellobiohydrolase gene

The Gram-negative soil micro-organism Myxobacter sp. AL-1 possesses at least five extracellular cellulases, the production of which is regulated by the growth cycle. We cloned the complete gene for one of these cellulases, termed cel9, which encoded a 67-kDa modular family 9 endoglycohydrolase, which was produced during the stationary phase of growth and was strongly enhanced by avicel. The predicted product of cel9 matches the structural architecture of family 9 cellulases such as Thermonospora fusca endo/exocellulase E4. Cel9 protein was synthesized in Escherichia coli from a multicopy plasmid and in Bacillus subtilis from the isopropyl thiogalactoside-inducible Pspac promoter and was purified from the culture medium. Thermal stability, optimum pH and temperature dependence of Cel9 were similar when expressed from either source, and were indistinguishable from related cellulases produced by thermophilic bacteria. Downstream from cel9 was found a partial ORF, designated cel48, the deduced product of which was highly similar to bacterial exocellobiohydrolases and processive endoglucanases belonging to family 48 of the glycosyl hydrolases. The cel9 and cel48 genes appear to be arranged as part of an operon.

Cloning, expression and characterization of a family 48 exocellulase, Cel48A, from Thermobifida fusca

The gene for a 104-kDa exocellulase, Cel48A, formerly E6, was cloned from Thermobifida fusca into Escherichia coli and Streptomyces lividans. The DNA sequence revealed a type II cellulose-binding domain at the N-terminus, followed by a FNIII-like domain and ending with a glycosyl hydrolase Family 48 catalytic domain. The enzyme and catalytic domain alone were each expressed in and purified from S. lividans and had very low catalytic activity on swollen cellulose, carboxymethyl cellulose, bacterial microcrystalline cellulose and filter paper. However, in synergistic assays on filter paper, the addition of Cel48A to a balanced mixture of T. fusca endocellulase and exocellulase increased the specific activity from 7.9 to 11.7 micromol cellobiose.min-1.mL-1, more than 15-fold higher than any single enzyme alone. Cel48A retained > 50% of its maximum activity from pH 5 to 9 and from 40 to 60 degrees C. Using SWISSMODEL, the amino-acid sequence of the Cel48Acd was modeled to the known structure of Clostridium cellulolyticum CelF. Family 48 enzymes are remarkably homologous at 35% identity for all their catalytic domains and some of the properties of the 10 members are discussed.

CelE, a multidomain cellulase from Clostridium cellulolyticum: a key enzyme in the cellulosome?

CelE, one of the three major proteins of the cellulosome of Clostridium cellulolyticum, was characterized. The amino acid sequence of the protein deduced from celE DNA sequence led us to the supposition that CelE is a three-domain protein. Recombinant CelE and a truncated form deleted of the putative cellulose binding domain (CBD) were obtained. Deletion of the CBD induces a total loss of activity. Exhibiting rather low levels of activity on soluble, amorphous, and crystalline celluloses, CelE is more active on p-nitrophenyl-cellobiose than the other cellulases from this organism characterized to date. The main product of its action on Avicel is cellobiose (more than 90% of the soluble sugars released), and its attack on carboxymethyl cellulose is accompanied by a relatively small decrease in viscosity. All of these features suggest that CelE is a cellobiohydrolase which has retained a certain capacity for random attack mode. We measured saccharification of Avicel and bacterial microcrystalline cellulose by associations of CelE with four other cellulases from C. cellulolyticum and found that CelE acts synergistically with all tested enzymes. The positive influence of CelE activity on the activities of other cellulosomal enzymes may explain its relative abundance in the cellulosome.

The extracellular xylan degradative system in Clostridium cellulolyticum cultivated on xylan: evidence for cell-free cellulosome production

In this study, we demonstrate that the cellulosome of Clostridium cellulolyticum grown on xylan is not associated with the bacterial cell. Indeed, the large majority of the activity (about 90%) is localized in the cell-free fraction when the bacterium is grown on xylan. Furthermore, about 70% of the detected xylanase activity is associated with cell-free high-molecular-weight complexes containing avicelase activity and the cellulosomal scaffolding protein CipC. The same repartition is observed with carboxymethyl cellulase activity. The cellulose adhesion of xylan-grown cells is sharply reduced in comparison with cellulose-grown cells. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that cellulosomes derived from xylan- and cellulose-grown cells have different compositions. In both cases, the scaffolding protein CipC is present, but the relative proportions of the other components is dramatically changed depending on the growth substrate. We propose that, depending on the growth substrate, C. cellulolyticum is able to regulate the cell association and cellulose adhesion of cellulosomes and regulate cellulosomal composition.

The cellulosome concept as an efficient microbial strategy for the degradation of insoluble polysaccharides

The cellulosome is an extracellular supramolecular machine that can efficiently degrade crystalline cellulosic substrates and associated plant cell wall polysaccharides. The cellulosome arrangement can also promote adhesion to the insoluble substrate, thus providing individual microbial cells with a direct competitive advantage in the utilization of the soluble hydrolysis products.

The crystal structure of the processive endocellulase CelF of Clostridium cellulolyticum in complex with a thiooligosaccharide inhibitor at 2.0 A resolution

The mesophilic bacterium Clostridium cellulolyticum exports multienzyme complexes called cellulosomes to digest cellulose. One of the three major components of the cellulosome is the processive endocellulase CelF. The crystal structure of the catalytic domain of CelF in complex with two molecules of a thiooligosaccharide inhibitor was determined at 2.0 A resolution. This is the first three-dimensional structure to be solved of a member of the family 48 glycosyl hydrolases. The structure consists of an (alpha alpha)6-helix barrel with long loops on the N-terminal side of the inner helices, which form a tunnel, and an open cleft region covering one side of the barrel. One inhibitor molecule is enclosed in the tunnel, the other exposed in the open cleft. The active centre is located in a depression at the junction of the cleft and tunnel regions. Glu55 is the proposed proton donor in the cleavage reaction, while the corresponding base is proposed to be either Glu44 or Asp230. The orientation of the reducing ends of the inhibitor molecules together with the chain translation through the tunnel in the direction of the active centre indicates that CelF cleaves processively cellobiose from the reducing to the non-reducing end of the cellulose chain.

Multidomain structure and cellulosomal localization of the Clostridium thermocellum cellobiohydrolase CbhA

The nucleotide sequence of the Clostridium thermocellum F7 cbhA gene, coding for the cellobiohydrolase CbhA, has been determined. An open reading frame encoding a protein of 1,230 amino acids was identified. Removal of a putative signal peptide yields a mature protein of 1,203 amino acids with a molecular weight of 135,139. Sequence analysis of CbhA reveals a multidomain structure of unusual complexity consisting of an N-terminal cellulose binding domain (CBD) homologous to CBD family IV, an immunoglobulin-like beta-barrel domain, a catalytic domain homologous to cellulase family E1, a duplicated domain similar to fibronectin type III (Fn3) modules, a CBD homologous to family III, a highly acidic linker region, and a C-terminal dockerin domain. The cellulosomal localization of CbhA was confirmed by Western blot analysis employing polyclonal antibodies raised against a truncated enzymatically active version of CbhA. CbhA was identified as cellulosomal subunit S3 by partial amino acid sequence analysis. Comparison of the multidomain structures indicates striking similarities between CbhA and a group of cellulases from actinomycetes. Average linkage cluster analysis suggests a coevolution of the N-terminal CBD and the catalytic domain and its spread by horizontal gene transfer among gram-positive cellulolytic bacteria.

Properties of exgS, a gene for a major subunit of the Clostridium cellulovorans cellulosome

The nucleotide sequence of P70, one of the three major subunits of the Clostridium cellulovorans cellulosome, has been determined. The gene designated as exgS (Genbank Accession No. U34793) consists of 2112 bp and encodes a protein containing 703 amino acids with a molecular mass of 77.7 kDa. ExgS has a putative signal peptide sequence of 32 amino acids. The N-terminal region is separated from the C-terminal region by a short-Pro-Thr-Pro linker. The C-terminal region of ExgS contains a duplicated sequence (DS), each sequence consisting of 22 amino acids. exgS, located 67 bp downstream of cbpA in the chromosome, is immediately upstream of a gene encoding a family 9 type endoglucanase that we have designated as EngH. This gene cluster to date consists of regA-cbpA-exgS-engH. Recombinant ExgS (rExgS) containing no signal peptide was expressed in E. coli. The rExgS actively digested several forms of cellulose, including Avicel, Sigmacell101, crystalline cellulose, and xylan, but not carboxymethyl cellulose (CMC). Cellotetraose was the smallest oligosaccharide substrate for rExgS. The enzymatic studies indicated that ExgS was an exoglucanase and had some properties similar to that of CelS from C. thermocellum and CelF from C.cellulolyticum. An exoglucanase has now been found to be a component of the C. cellulovorans cellulosome as well as the previously reported endoglucanases.

Physiology of carbohydrate to solvent conversion by clostridia

The solvent-forming clostridia have attracted interest because of their ability to convert a range of carbohydrates to end-products such as acetone, butanol and ethanol. Polymeric substrates such as cellulose, hemicellulose and starch are degraded by extracellular enzymes. The majority of cellulolytic clostridia, typified by Clostridium thermocellum, produce a multi-enzyme cellulase complex in which the organization of components is critical for activity against the crystalline substrate. A variety of enzymes involved in degradation of hemicellulose and starch have been identified in different strains. The products of degradation, and other soluble substrates, are accumulated via membrane-bound transport systems which are generally poorly characterized. It is clear, however, that the phosphoenolpyruvate-dependent phosphotransferase system (PTS) plays a major role in solute uptake in several species. Accumulated substrates are converted by intracellular enzymes to end-products characteristic of the organism, with production of ATP to support growth. The metabolic pathways have been described, but understanding of mechanisms of regulation of metabolism is incomplete. Synthesis of extracellular enzymes and membrane-bound transport systems is commonly subject to catabolite repression in the presence of a readily metabolized source of carbon and energy. While many genes encoding cellulases, xylanases and amylases have been cloned and sequenced, little is known of control of their expression. Although the mechanism of catabolite repression in clostridia is not understood, some recent findings implicate a role for the PTS as in other low G-C Gram-positive bacteria. Emphasis has been placed on describing the mechanisms underlying the switch of C. acetobutylicum fermentations from acidogenic to solventogenic metabolism at the end of the growth phase. Factors involved include a lowered pH and accumulation of undissociated butyric acid, intracellular concentration of ATP and reduced pyridine nucleotides, nutrient limitation, and the interplay between pathways of carbon and electron flow. Genes encoding enzymes of solvent pathways have been cloned and sequenced, and their expression correlated with the pattern of end-product formation in fermentations. There is evidence that the initiation of solvent formation may be subject to control mechanisms similar to other stationary-phase phenomena, including sporulation. The application of recently developed techniques for genetic manipulation of the bacterium is improving understanding of the regulatory circuits, but a complete molecular description of the control of solvent formation remains elusive. Experimental manipulation of the pathways of electron flow in other species has been shown to influence the range and yield of fermentation end-products. Acid-forming clostridia can, under appropriate conditions, be induced to form atypical solvents as products. While the mechanisms of regulation of gene expression are not at all understood, the capacity to adapt in this way further illustrates the metabolic flexibility of clostridial strains.

CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose

The gene coding for CelG, a family 9 cellulase from Clostridium cellulolyticum, was cloned and overexpressed in Escherichia coli. Four different forms of the protein were genetically engineered, purified, and studied: CelGL (the entire form of CelG), CelGcat1 (the catalytic domain of CelG alone), CelGcat2 (CelGcat1 plus 91 amino acids at the beginning of the cellulose binding domain [CBD]), and GST-CBD(CelG) (the CBD of CelG fused to glutathione S-transferase). The biochemical properties of CelG were compared with those of CelA, an endoglucanase from C. cellulolyticum which was previously studied. CelG, like CelA, was found to have an endo cutting mode of activity on carboxymethyl cellulose (CMC) but exhibited greater activity on crystalline substrates (bacterial microcrystalline cellulose and Avicel) than CelA. As observed with CelA, the presence of the nonhydrolytic miniscaffolding protein (miniCipC1) enhanced the activity of CelG on phosphoric acid swollen cellulose (PASC), but to a lesser extent. The absence of the CBD led to the complete inactivation of the enzyme. The abilities of CelG and GST-CBD(CelG) to bind various substrates were also studied. Although the entire enzyme is able to bind to crystalline cellulose at a limited number of sites, the chimeric protein GST-CBD(CelG) does not bind to either of the tested substrates (Avicel and PASC). The lack of independence between the two domains and the weak binding to cellulose suggest that this CBD-like domain may play a special role and be either directly or indirectly involved in the catalytic reaction.

Structure and mechanism of endo/exocellulase E4 from Thermomonospora fusca

Cellulase E4 from Thermomonospora fusca is unusual in that it has characteristics of both exo- and endo-cellulases. Here we report the crystal structure of a 68K M(r) fragment of E4 (E4-68) at 1.9 A resolution. E4-68 contains both a family 9 catalytic domain, exhibiting an (alpha/alpha)6 barrel fold, and a family III cellulose binding domain, having an antiparallel beta-sandwich fold. While neither of these folds is novel, E4-68 provides the first cellulase structure having interacting catalytic and cellulose binding domains. The complexes of E4-68 with cellopentaose, cellotriose and cellobiose reveal conformational changes associated with ligand binding and allow us to propose a catalytic mechanism for family 9 enzymes. We also provide evidence that E4 has two novel characteristics: first it combines exo- and endo-activities and second, when it functions as an exo-cellulase, it cleaves off cellotetraose units.

The cellulolytic system of Clostridium cellulolyticum

Recent findings on the cellulolytic system of the mesophilic Clostridium cellulolyticum are reviewed. Six cellulases and the scaffolding protein, which are, at the present time, the known components of the cellulosome have been cloned. The catalytic and structural properties of the cloned enzymes CelA, CelC, CelD and CelF are described. It was shown that the grafting of the cellulases onto the scaffolding protein was performed using the dockerin-cohesin attachment device and was strictly dependent on the integrity of both components of the complex. The amino-acid sequences of dockerin and cohesin domains of C. cellulolyticum were compared to that of C. cellulovorans and C. thermocellum. This sequence analysis shows that domains belonging to the thermophilic or the mesophilic bacteria can be placed into two well defined groups. The genetic organization of the gene cluster of C. cellulolyticum is discussed.

Characterization of the cellulolytic complex (cellulosome) produced by Clostridium cellulolyticum

The cellulolytic complex was isolated from Clostridium cellulolyticum grown on cellulose. Upon gel filtration, the complex was found to consist mainly of 600-kDa units, along with a 16-MDa aggregate. Its ability to degrade various substrates and its capacity to bind to the crystalline cellulose were measured. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing, and blotting analysis showed that all of the known cellulases of this organism are present in this complex. Three major components were observed: the first component, a noncatalytic, large (160-kDa) protein, was identified based on its ability to bind to the dockerin-containing cellulases as scaffolding protein CipC. The other two components, which had molecular masses of 94 and 80.6 kDa, were identified as CelE and CelF, respectively. The identified cellulases and some other components of the cellulosome were able to bind to a miniCipC1 construct. In addition to providing an extensive description of the system, the results of the present study confirm that the dockerin-cohesin domain interaction plays an essential role in the constitution of the cellulosome.

The processive endocellulase CelF, a major component of the Clostridium cellulolyticum cellulosome: purification and characterization of the recombinant form

The recombinant form of the cellulase CelF of Clostridium cellulolyticum, tagged by a C-terminal histine tail, was overproduced in Escherichia coli. The fusion protein was purified by affinity chromatography on a Ni-nitrilotriacetic acid column. The intact form of CelF (Mr, 79,000) was rapidly degraded at the C terminus, giving a shorter stable form, called truncated CelF (Mr, 71,000). Both the entire and the truncated purified forms degraded amorphous cellulose (kcat = 42 and 30 min(-1), respectively) and microcrystalline cellulose (kcat = 13 and 10 min(-1), respectively). The high ratio of soluble reducing ends to insoluble reducing ends released by truncated CelF from amorphous cellulose showed that CelF is a processive enzyme. Nevertheless, the diversity of the cellodextrins released by truncated CelF from phosphoric acid-swollen cellulose at the beginning of the reaction indicated that the enzyme might randomly hydrolyze beta-1,4 bonds. This hypothesis was supported by viscosimetric measurements and by the finding that CelF and the endoglucanase CelA are able to degrade some of the same cellulose sites. CelF was therefore called a processive endocellulase. The results of immunoblotting analysis showed that CelF was associated with the cellulosome of C. cellulolyticum. It was identified as one of the three major components of cellulosomes. The ability of the entire form of CelF to interact with CipC, the cellulosome integrating protein, or mini-CipC1, a recombinant truncated form of CipC, was monitored by interaction Western blotting (immunoblotting) and by binding assays using a BIAcore biosensor-based analytical system.

Molecular study and overexpression of the Clostridium cellulolyticum celF cellulase gene in Escherichia coli

The CelF-encoding sequence was isolated from Clostridium cellulolyticum genomic DNA using the inverse PCR technique. The gene lies between cipC (the gene encoding the cellulosome scaffolding protein) and celC (coding for the endoglucanase C) in the large cel cluster of this mesophilic cellulolytic Clostridium species. Comparisons between the deduced amino acid sequence of the mature CelF (693 amino acids, molecular mass 77626) and those of other beta-glycanases showed that this enzyme belongs to the recently proposed family L of cellulases (family 48 of glycosyl hydrolases). The protein was overproduced in Escherichia coli using the T7 expression system. It formed both cytoplasmic and periplasmic inclusion bodies when induction was performed at 37 degrees C. Surprisingly, the protein synthesized from the cytoplasmic production vector was degraded in the Ion protease-deficient strain BL21(DE3). The induction conditions were optimized with regard to the concentration of inductor, cell density, and temperature and time of induction in order to overproduce an active periplasmic protein (CelFp) which was both soluble and stable. It was collected using the osmotic shock method. The enzymic degradation of various cellulosic substrates by CelFp was studied. CelFp degraded swollen Avicel more efficiently than substituted soluble CM-cellulose or crystalline Avicel and was not active on xylan. Its activity is therefore quite different from that of endoglucanases, which are most active on CM-cellulose.

Interaction between the endoglucanase CelA and the scaffolding protein CipC of the Clostridium cellulolyticum cellulosome

The 5' end of the cipC gene, coding for the N-terminal part of CipC, the scaffolding protein of Clostridium cellulolyticum ATCC 35319, was cloned and sequenced. It encodes a 586-amino-acid peptide, including several domains: a cellulose-binding domain, a hydrophilic domain, and two hydrophobic domains (cohesin domains). Sequence alignments showed that the N terminus of CipC and CbpA of C. cellulovorans ATCC 35296 have the same organization. The mini-CipC polypeptide, containing a cellulose-binding domain, hydrophilic domain 1, and cohesin domain 1, was overexpressed in Escherichia coli and purified. The interaction between endoglucanase CelA, with (CelA2) and without (CelA3) the characteristic clostridial C-terminal domain called the duplicated-segment or dockerin domain, and the mini-CipC polypeptide was monitored by two different methods: the interaction Western blotting (immunoblotting) method and binding assays with biotin-labeled protein. Among the various forms of CelA (CelA2, CelA3, and an intermediary form containing only part of the duplicated segment), only CelA2 was found to interact with cohesin domain 1 of CipC. The apparent equilibrium dissociation constant of the CelA2-mini-CipC complex was 7 x 10(-9)M, which indicates that there exists a high affinity between these two proteins.

Biochemical properties of a beta-xylosidase from Clostridium cellulolyticum

A 43-kDa beta-xylosidase from Clostridium cellulolyticum was purified to homogeneity. The enzyme releases xylose from p-nitrophenylxylose and xylodextrins with a degree of polymerization ranging between 2 and 5. The N-terminal amino acid sequence of the enzyme showed homologies with three other bacterial beta-xylosidases. By proton nuclear magnetic resonance spectroscopy, the enzyme was found to act by inverting the beta-anomeric configuration.