Characterization of an acetyl-CoA C-acetyltransferase (thiolase) gene from Clostridium acetobutylicum ATCC 824

Identification of ACAA1 and HADHB as potential prognostic biomarkers based on a novel fatty acid oxidation-related gene model in head and neck squamous cell carcinoma: A retrospective study

OBJECTIVES

To investigate the importance of fatty acid oxidation (FAO)-related genes in predicting the progression and prognosis of head and neck squamous cell carcinoma (HNSCC).

METHODS

The FAO-related gene prognostic model was established employing Cox regression analyses, during which accuracy and sensitivity of the gene model were evaluated in The Cancer Genome Atlas (TCGA) internal testing and Gene Expression Omnibus (GEO) external validation cohorts. Ultimately, hub genes were identified among 13 model genes using STRING and Cytoscape, with preliminary validation carried out through immunohistochemistry.

RESULTS

The model, which comprised 13 genes (ABCD2, ACAA1, ACACB, AKT1, CNR1, CPT1C, CROT, ECHDC2, ETFA, HADHB, IRS2, LONP2, and SLC25A17), was established. On the basis of the median risk score, the two cohorts were grouped into low-and high-risk groups in the subsequent test and validation, and the former exhibited significantly higher survival rates than the latter. Nomograms were established based on prognostic factors, including stage and risk score, and individualized for the prediction of HNSCC patients. Ultimately, immunohistochemical staining showed that ACAA1 and HADHB were significantly under-expressed in HNSCC, with a favorable prognosis associated with low HADHB and high ACAA1.

CONCLUSIONS

The gene prognostic model has illustrated promising capability in predicting the prognosis, and ACAA1 and HADHB might serve as potential therapeutic biomarkers for HNSCC patients.

Metabolic flux optimization of iterative pathways through orthogonal gene expression control: Application to the β-oxidation reversal

Balancing relative expression of pathway genes to minimize flux bottlenecks and metabolic burden is one of the key challenges in metabolic engineering. This is especially relevant for iterative pathways, such as reverse β-oxidation (rBOX) pathway, which require control of flux partition at multiple nodes to achieve efficient synthesis of target products. Here, we develop a plasmid-based inducible system for orthogonal control of gene expression (referred to as the TriO system) and demonstrate its utility in the rBOX pathway. Leveraging effortless construction of TriO vectors in a plug-and-play manner, we simultaneously explored the solution space for enzyme choice and relative expression levels. Remarkably, varying individual expression levels led to substantial change in product specificity ranging from no production to optimal performance of about 90% of the theoretical yield of the desired products. We obtained titers of 6.3 g/L butyrate, 2.2 g/L butanol and 4.0 g/L hexanoate from glycerol in E. coli, which exceed the best titers previously reported using equivalent enzyme combinations. Since a similar system behavior was observed with alternative termination routes and higher-order iterations, we envision our approach to be broadly applicable to other iterative pathways besides the rBOX. Considering that high throughput, automated strain construction using combinatorial promoter and RBS libraries remain out of reach for many researchers, especially in academia, tools like the TriO system could democratize the testing and evaluation of pathway designs by reducing cost, time and infrastructure requirements.

Development of a genetic engineering toolbox for syngas-utilizing acetogen Clostridium sp. AWRP

BACKGROUND

Clostridium sp. AWRP (AWRP) is a novel acetogenic bacterium isolated under high partial pressure of carbon monoxide (CO) and can be one of promising candidates for alcohol production from carbon oxides. Compared to model strains such as C. ljungdahlii and C. autoethanogenum, however, genetic manipulation of AWRP has not been established, preventing studies on its physiological characteristics and metabolic engineering.

RESULTS

We were able to demonstrate the genetic domestication of AWRP, including transformation of shuttle plasmids, promoter characterization, and genome editing. From the conjugation experiment with E. coli S17-1, among the four replicons tested (pCB102, pAMβ1, pIP404, and pIM13), three replicated in AWRP but pCB102 was the only one that could be transferred by electroporation. DNA methylation in E. coli significantly influenced transformation efficiencies in AWRP: the highest transformation efficiencies (102-103 CFU/µg) were achieved with unmethylated plasmid DNA. Determination of strengths of several clostridial promoters enabled the establishment of a CRISPR/Cas12a genome editing system based on Acidaminococcus sp. BV3L6 cas12a gene; interestingly, the commonly used CRISPR/Cas9 system did not work in AWRP, although it expressed the weakest promoter (C. acetobutylicum Pptb) tested. This system was successfully employed for the single gene deletion (xylB and pyrE) and double deletion of two prophage gene clusters.

CONCLUSIONS

The presented genome editing system allowed us to achieve several genome manipulations, including double deletion of two large prophage groups. The genetic toolbox developed in this study will offer a chance for deeper studies on Clostridium sp. AWRP for syngas fermentation and carbon dioxide (CO2) sequestration.

Cloning, prokaryotic expression, and purification of acetyl-CoA C-acetyltransferase from Atractylodes lancea

BACKGROUND

Cangzhu (Atractylodes lancea), a valuable and common traditional Chinese medicinal herb, is primarily used as an effective medicine with various health-promoting effects. The main pharmacological bioactive ingredients in the rhizome of A. lancea are terpenoids. Acetyl-CoA C-acetyltransferase (AACT) is the first enzyme in the terpenoid synthesis pathway and catalyzes two units of acetyl-CoA into acetoacetyl-CoA.

OBJECTIVE

The objective of the present work was to clone and identify function of AlAACT from Atractylodes lancea.

METHOD

A full-length cDNA clone of AlAACT was isolated using PCR and expressed in Escherichia coli. The expressed protein was purified using Ni-NTA agarose column using standard protocols. AlAACT was transiently expressed in N. benthamiana leaves to determine their subcellular location. The difference in growth between recombinant bacteria and control bacteria under different stresses was observed using the droplet plate experiment. Results：In this study, a full-length cDNA of AACT (AlAACT) was cloned from A. lancea, which contains a 1,227 bp open reading frame and encodes a protein with 409 amino acids. Bioinformatic and phylogenetic analysis clearly suggested that AlAACT shared high similarity with AACTs from other plants. The recombinant protein pET32a(+)/AlAACT was successfully expressed in Escherichia coli BL21(DE3) cells induced with 0.4 mM IPTG at 30°C as the optimized condition. The recombinant enzyme pET-32a-AlAACT was purified using the Ni-NTA column based on the His-tag, and the molecular weight was determined to be 62 kDa through SDS-PAGE and Western Blot analysis. The recombinant protein was eluted with 100, 300, and 500 mM imidazole; most of the protein was eluted with 300 mM imidazole. Under mannitol stress, the recombinant pET-32a-AlAACT protein showed a substantial advantage in terms of growth rates compared to the control. However, this phenomenon was directly opposite under NaCl abiotic stress. Subcellular localization showed that AlAACT localizes to the nucleus and cytoplasm. Conclusion：The expression and purification of recombinant enzyme pET-32a-AlAACT were successful, and the recombinant strain pET-32a-AlAACT in showed better growth in a drought stress. The expression of AlAACT-EGFP fusion protein revealed its localization in both nuclear and cytoplasm compartments. This study provides an important foundation for further research into the effects of terpenoid biosynthesis in A. lancea.

The metabolic process of methane production by combined fermentation of coal and corn straw

The anaerobic degradation of coal combined with straw biomass can promote the methane production. The biogas production potential and metabolic pathway were explored via the co-digestion simulation experiment of coal and corn straw. The results showed that 2 g of corn straw combined respectively with 4 g of bituminous coal A, 6 g of bituminous coal B and 4 g of bituminous coal C resulted in highest methane yields. The structure of lignocellulose in corn straw was partially degraded into guaiacyl and syringyl units. Meanwhile, the content of biodegradable tyrosine like protein and soluble microbial by-products in liquid phase significantly decreased. Significantly, the structure of archaea altered from aceticlastic to hydrogenotrophic methanogens when the fermentation substrate changed from high to low rank coal. The proportion of hydrogenotrophic methanogens was significantly higher than that of aceticlastic and methylotrophic methanogens, and the hydrogenotrophic pathway was dominant than the aceticlastic pathway.

Effect of the ACAA1 Gene on Preadipocyte Differentiation in Sheep

Acetyl-CoA acyltransferase 1 (ACAA1) functions as a key regulator of fatty acid β-oxidation in peroxisomes by catalyzing the cleavage of 3-ketoacyl-CoA to acetyl-CoA and acyl-CoA, which participate in the extension and degradation of fatty acids. Thus, ACAA1 is an important regulator of lipid metabolism and plays an essential role in fatty acid oxidation and lipid metabolism. Our previous study findings revealed that ACAA1 is closely associated with the peroxisome proliferator-activated receptor (PPAR) signaling and fatty acid metabolism pathways, which are involved in fat deposition in sheep, leading to our hypothesis that ACAA1 may be involved in fat deposition by regulating lipid metabolism. However, the associated molecular mechanism remains unclear. In the present study, to assess the potential function of ACAA1 in sheep preadipocyte differentiation, we knocked down and overexpressed ACAA1 in sheep preadipocytes and evaluated the pattern of ACAA1 gene expression during preadipocyte differentiation by qRT-PCR. ACAA1 was significantly expressed in the early stage of adipocyte differentiation, and then its expression decreased. ACAA1 deficiency increased lipid accumulation and the triglyceride content and promoted sheep preadipocyte differentiation, whereas ACAA1 overexpression inhibited adipogenesis and decreased lipid accumulation and the triglyceride content. Simultaneously, we demonstrated that ACAA1 deficiency upregulated the expressions of the adipogenic marker genes PPARγ and C/EBPα in sheep preadipocytes, but ACAA1 overexpression inhibited the expressions of these markers, indicating that ACAA1 affects lipid metabolism by regulating adipogenic marker genes. Our results may promote a better understanding of the regulation of adipogenesis by ACAA1.

Structural-Genetic Characterization Of Novel Butaryl co-A Dehydrogenase and Proposition of Butanol Biosynthesis Pathway in Pusillimonas ginsengisoli SBSA

Despite extensive use in the biofuel industry, only butyryl co-A dehydrogenase enzymes from the Clostridia group have undergone extensive structural and genetic characterization. The present study, portrays the characterization of structural, functional and phylogenetic properties of butyryl co-A dehydrogenase identified within the genome of Pusillimonas ginsengisoli SBSA. In silico characterization, homology modelling and docking data indicates that this protein is a homo-tetramer and 388 amino acid residue long, rich in alanine and leucine residue; having molecular weight of 42347.69 dalton. Its isoelectric point value is 5.78; indicate its neutral nature while 38.38 instability index value indicate its stable nature. Its thermostable nature evidenced by its high aliphatic index (93.14); makes its suitable for industry-based use. The secondary structure prediction analysis of butyryl co-A dehydrogenase unveiled that the proteins has secondary arrangements of 54% α-helix, 13% β-stand and 5% disordered conformation. However, phylogenetic analysis clearly indicates that probably horizontal gene transfer is the primary mechanism of spreading of this gene in this organism. Notably, multiple sequence alignment study of phylogenetically diverse butyryl co-A dehydrogenase sequence highlighted the presence of conserved amino acid residues i.e. YXV/LGXKXWXS/T. Physicochemical characterization of other relevant proteins involved in butanol metabolism of SBSA also has been carried out. However, metabolic construction of functional butanol biosynthesis pathway in SBSA, enlightened its cost-effective potential use in biofuel industry as an alternate to Clostridia system.

Part by Part: Synthetic Biology Parts Used in Solventogenic Clostridia

The solventogenic Clostridia are of interest to the chemical industry because of their natural ability to produce chemicals such as butanol, acetone and ethanol from diverse feedstocks. Their use as whole cell factories presents multiple metabolic engineering targets that could lead to improved sustainability and profitability of Clostridium industrial processes. However, engineering efforts have been held back by the scarcity of genetic and synthetic biology tools. Over the past decade, genetic tools to enable transformation and chromosomal modifications have been developed, but the lack of a broad palette of synthetic biology parts remains one of the last obstacles to the rapid engineered improvement of these species for bioproduction. We have systematically reviewed existing parts that have been used in the modification of solventogenic Clostridia, revealing a narrow range of empirically chosen and nonengineered parts that are in current use. The analysis uncovers elements, such as promoters, transcriptional terminators and ribosome binding sites where increased fundamental knowledge is needed for their reliable use in different applications. Together, the review provides the most comprehensive list of parts used and also presents areas where an improved toolbox is needed for full exploitation of these industrially important bacteria.

Stringency of Synthetic Promoter Sequences in Clostridium Revealed and Circumvented by Tuning Promoter Library Mutation Rates

Collections of characterized promoters of different strengths are key resources for synthetic biology, but are not well established for many important organisms, including industrially relevant Clostridium spp. When generating promoters, reporter constructs are used to measure expression, but classical fluorescent reporter proteins are oxygen-dependent and hence inactive in anaerobic bacteria like Clostridium. We directly compared oxygen-independent reporters of different types in Clostridium acetobutylicum and found that glucuronidase (GusA) from E. coli performed best. Using GusA, a library of synthetic promoters was first generated by a typical approach entailing complete randomization of a constitutive thiolase gene promoter (P_thl) except for the consensus -35 and -10 elements. In each synthetic promoter, the chance of each degenerate position matching P_thl was 25%. Surprisingly, none of the tested synthetic promoters from this library were functional in C. acetobutylicum, even though they functioned as expected in E. coli. Next, instead of complete randomization, we specified lower promoter mutation rates using oligonucleotide primers synthesized using custom mixtures of nucleotides. Using these primers, two promoter libraries were constructed in which the chance of each degenerate position matching P_thl was 79% or 58%, instead of 25% as before. Synthetic promoters from these "stringent" libraries functioned well in C. acetobutylicum, covering a wide range of strengths. The promoters functioned similarly in the distantly related species Clostridium sporogenes, and allowed predictable metabolic engineering of C. acetobutylicum for acetoin production. Besides generating the desired promoters and demonstrating their useful properties, this work indicates an unexpected "stringency" of promoter sequences in Clostridium, not reported previously.

Rapid Generation of Universal Synthetic Promoters for Controlled Gene Expression in Both Gas-Fermenting and Saccharolytic Clostridium Species

Engineering solventogenic clostridia, a group of important industrial microorganisms, to realize their full potential in biorefinery application is still hindered by the absence of plentiful biological parts. Here, we developed an effective approach for rapid generation of a synthetic promoter library in solventogenic clostridia based on a dual-reporter system (catP-lacZ) and a widely used strong thl promoter. The yielded artificial promoters, spanning 2 orders of magnitude, comprised two modular components (the core promoter region and the spacer between RBS and the translation-initiating code), and the strongest promoter had an over 10-fold-higher activity than the original expression part P_thl. The test of these synthetic promoters in controlled expression of sadh and danK in saccharolytic C. acetobutylicum and gas-fermenting C. ljungdahlii, respectively, gave the expected phenotypes, and moreover, showed good correlation between promoter activities and phenotypic changes. The presented wide-strength-range promoters here will be useful for synthetic biology application in solventogenic clostridia.

Butanol fermentation

This review provides an overview on bacterial butanol production and recent developments concerning strain improvement, newly built butanol production plants, and the importance of alternative substrates, especially lignocellulosic hydrolysates. The butanol fermentation using solventogenic clostridial strains, particularly Clostridium acetobutylicum, is a very old industrial process (acetone-butanol-ethanol-ABE fermentation). The genome of this organism has been sequenced and analysed, leading to important improvements in rational strain construction. As the traditional ABE fermentation process is economically unfavourable, novel butanol production strains are being developed. In this review, some newly engineered solvent-producing Clostridium strains are described and strains of which sequences are available are compared with C. acetobutylicum. Furthermore, the past and present of commercial butanol fermentation are presented, including active plants and companies. Finally, the use of biomass as substrate for butanol production is discussed. Some advances concerning processing of biomass in a biorefinery are highlighted, which would allow lowering the price of the butanol fermentation process at industrial scale.

Simultaneous production of isopropanol, butanol, ethanol and 2,3-butanediol by Clostridium acetobutylicum ATCC 824 engineered strains

Isopropanol represents a widely-used commercial alcohol which is currently produced from petroleum. In nature, isopropanol is excreted by some strains of Clostridium beijerinckii, simultaneously with butanol and ethanol during the isopropanol butanol ethanol (IBE) fermentation. In order to increase isopropanol production, the gene encoding the secondary-alcohol dehydrogenase enzyme from C. beijerinckii NRRL B593 (adh) which catalyzes the reduction of acetone to isopropanol, was cloned into the acetone, butanol and ethanol (ABE)-producing strain C. acetobutylicum ATCC 824. The transformants showed high capacity for conversion of acetone into isopropanol (> 95%). To increase isopropanol production levels in ATCC 824, polycistronic transcription units containing, in addition to the adh gene, homologous genes of the acetoacetate decarboxylase (adc), and/or the acetoacetyl-CoA:acetate/butyrate:CoA transferase subunits A and B (ctfA and ctfB) were constructed and introduced into the wild-type strain. Combined overexpression of the ctfA and ctfB genes resulted in enhanced solvent production. In non-pH-controlled batch cultures, the total solvents excreted by the transformant overexpressing the adh, ctfA, ctfB and adc genes were 24.4 g/L IBE (including 8.8 g/L isopropanol), while the control strain harbouring an empty plasmid produced only 20.2 g/L ABE (including 7.6 g/L acetone). The overexpression of the adc gene had limited effect on IBE production. Interestingly, all transformants with the adh gene converted acetoin (a minor fermentation product) into 2,3-butanediol, highlighting the wide metabolic versatility of solvent-producing Clostridia.

Shotgun proteomic monitoring of Clostridium acetobutylicum during stationary phase of butanol fermentation using xylose and comparison with the exponential phase

Economically viable production of solvents through acetone–butanol–ethanol (ABE) fermentation requires a detailed understanding of Clostridium acetobutylicum. This study focuses on the proteomic profiling of C. acetobutylicum ATCC 824 from the stationary phase of ABE fermentation using xylose and compares with the exponential growth by shotgun proteomics approach. Comparative proteomic analysis revealed 22.9% of the C. acetobutylicum genome and 18.6% was found to be common in both exponential and stationary phases. The proteomic profile of C. acetobutylicum changed during the ABE fermentation such that 17 proteins were significantly differentially expressed between the two phases. Specifically, the expression of five proteins namely, CAC2873, CAP0164, CAP0165, CAC3298, and CAC1742 involved in the solvent production pathway were found to be significantly lower in the stationary phase compared to the exponential growth. Similarly, the expression of fucose isomerase (CAC2610), xylulose kinase (CAC2612), and a putative uncharacterized protein (CAC2611) involved in the xylose utilization pathway were also significantly lower in the stationary phase. These findings provide an insight into the metabolic behavior of C. acetobutylicum between different phases of ABE fermentation using xylose.

Formic acid triggers the "Acid Crash" of acetone-butanol-ethanol fermentation by Clostridium acetobutylicum

Solvent production by Clostridium acetobutylicum collapses when cells are grown in pH-uncontrolled glucose medium, the so-called "acid crash" phenomenon. It is generally accepted that the fast accumulation of acetic acid and butyric acid triggers the acid crash. We found that addition of 1 mM formic acid into corn mash medium could trigger acid crash, suggesting that formic acid might be related to acid crash. When it was grown in pH-uncontrolled glucose medium or glucose-rich medium, C. acetobutylicum DSM 1731 containing the empty plasmid pIMP1 failed to produce solvents and was found to accumulate 0.5 to 1.24 mM formic acid intracellularly. In contrast, recombinant strain DSM 1731 with formate dehydrogenase activity did not accumulate formic acid intracellularly and could produce solvent as usual. We therefore conclude that the accumulation of formic acid, rather than acetic acid and butyric acid, is responsible for the acid crash of acetone-butanol-ethanol fermentation.

Functional expression of the thiolase gene thl from Clostridium beijerinckii P260 in Lactococcus lactis and Lactobacillus buchneri

The first step of the butanol pathway involves an acetyl-CoA acetyltransferase (ACoAAT), which controls the key branching point from acetyl-CoA to butanol. ACoAAT, also known as thiolase (EC 2.3.1.9), is encoded by the thl gene and catalyzes ligation of two acetyl-CoA into acetoacetyl-CoA. Bioinformatics analyses suggest there are no thl in the genomes of lactic acid bacteria (LAB), in this study we aimed to introduce the thl gene into selected LAB strains and analyze the fermentation products. The thl gene from Clostridium beijerinckii P260 was amplified by genomic PCR using gene-specific primers designed from the published genome sequences of C. beijerinckii NCIMB 8025. The 1.2 kb thl gene was cloned into the pETBlue vector and overexpressed in Escherichia coli Tuner (DE3) pLacI cells. Functional enzyme activity was detected spectrophotometrically by measuring the decrease in absorbance at 303 nm, which reflects the change in acetoacetyl-CoA concentrations. The thl gene was subsequently introduced into Lactococcus lactis and Lactobacillus buchneri strains, and GC analysis indicated about 28 mg/L and 66 mg/L of butanol was produced in the recombinant strains, respectively. This study reports the first step toward developing a butanolgenic LAB through the introduction of the butanol pathway into butanol-tolerant strains of LAB.

Optimized clostridium-directed enzyme prodrug therapy improves the antitumor activity of the novel DNA cross-linking agent PR-104

We have previously shown that spores of the nonpathogenic clostridial strain C. sporogenes genetically engineered to express the E. coli-derived cytosine deaminase gene are effective in converting systemically injected nontoxic 5-fluorocytosine into the toxic anticancer drug 5-fluorouracil, thereby producing tumor-specific antitumor activity. To improve the expression of E. coli-derived genes with this system, we first replaced the original fdP promoter in the vector with one of two powerful endogenous clostridial promoters: that of the thiolase gene (thlP) and that for the clostridial transcription factor abrB310 (abrBP). These substitutions improved protein expression levels of the prodrug-activating genes by 2- to 3-fold in comparison with fdP-driven expression. However, despite these strong promoters, we found much higher expression of the nitroreductase (NTR) protein in the E. coli host compared with the clostridial host, which we hypothesized could be the result of different codon use between the two organisms. To test this, we constructed new expression vectors with an artificially synthesized NTR gene using optimized clostridial codons (sNTR). Results from both enzymatic assays and Western blots of cell extracts from clostridial transformants harboring plasmid constructs of thlP-sNTR and abrBP-sNTR showed that the expression and activity of the NTR gene product was increased by approximately 20-fold compared with the original construct. In vivo studies with i.v. administered sNTR-expressing C. sporogenes spores in SiHa tumor-bearing mice showed significantly improved antitumor efficacy when combined with either 5-aziridinyl-2,4-dinitrobenzamide (CB1954) or the novel dinitrobenzamide mustard prodrug, PR-104.

Transcriptional regulation of the Clostridium cellulolyticum cip-cel operon: a complex mechanism involving a catabolite-responsive element

The cip-cel cluster of genes plays an important role in the catabolism of the substrate cellulose by Clostridium cellulolyticum. It encodes several key components of the cellulosomes, including the scaffolding protein CipC and the major cellulase Cel48F. All the genes of this cluster display linked transcription, focusing attention on the promoter upstream from the first gene, cipC. We analyzed the regulation of the cipC promoter using a transcriptional fusion approach. A single promoter is located between nucleotides -671 and -643 with respect to the ATG start codon, and the large mRNA leader sequence is processed at position -194. A catabolite-responsive element (CRE) 414 nucleotides downstream from the transcriptional start site has been shown to be involved in regulating this operon by a carbon catabolite repression mechanism. This CRE is thought to bind a CcpA-like regulator complexed with a P-Ser-Crh-like protein. Sequences surrounding the promoter sequence may also be involved in direct (sequence-dependent DNA curvature) or indirect (unknown regulator binding) regulation.

Polyhydroxyalkanoates in Gram-positive bacteria: insights from the genera Bacillus and Streptomyces

Gram-positive bacteria, notably Bacillus and Streptomyces, have been used extensively in industry. However, these microorganisms have not yet been exploited for the production of the biodegradable polymers, polyhydroxyalkanoates (PHAs). Although PHAs have many potential applications, the cost of production means that medical applications are currently the main area of use. Gram-negative bacteria, currently the only commercial source of PHAs, have lipopolysaccharides (LPS) which co-purify with the PHAs and cause immunogenic reactions. On the other hand, Gram- positive bacteria lack LPS, a positive feature which justifies intensive investigation into their production of PHAs. This review summarizes currently available knowledge on PHA production by Gram- positive bacteria especially Bacillus and Streptomyces. We hope that this will form the basis of further research into developing either or both as a source of PHAs for medical applications.

Catabolism of benzoate and phthalate in Rhodococcus sp. strain RHA1: redundancies and convergence

Genomic and proteomic approaches were used to investigate phthalate and benzoate catabolism in Rhodococcus sp. strain RHA1, a polychlorinated biphenyl-degrading actinomycete. Sequence analyses identified genes involved in the catabolism of benzoate (ben) and phthalate (pad), the uptake of phthalate (pat), and two branches of the beta-ketoadipate pathway (catRABC and pcaJIHGBLFR). The regulatory and structural ben genes are separated by genes encoding a cytochrome P450. The pad and pat genes are contained on a catabolic island that is duplicated on plasmids pRHL1 and pRHL2 and includes predicted terephthalate catabolic genes (tpa). Proteomic analyses demonstrated that the beta-ketoadipate pathway is functionally convergent. Specifically, the pad and pat gene products were only detected in phthalate-grown cells. Similarly, the ben and cat gene products were only detected in benzoate-grown cells. However, pca-encoded enzymes were present under both growth conditions. Activity assays for key enzymes confirmed these results. Disruption of pcaL, which encodes a fusion enzyme, abolished growth on phthalate. In contrast, after a lag phase, growth of the mutant on benzoate was similar to that of the wild type. Proteomic analyses revealed 20 proteins in the mutant that were not detected in wild-type cells during growth on benzoate, including a CatD homolog that apparently compensated for loss of PcaL. Analysis of completed bacterial genomes indicates that the convergent beta-ketoadipate pathway and some aspects of its genetic organization are characteristic of rhodococci and related actinomycetes. In contrast, the high redundancy of catabolic pathways and enzymes appears to be unique to RHA1 and may increase its potential to adapt to new carbon sources.

Homologous and heterologous overexpression in Clostridium acetobutylicum and characterization of purified clostridial and algal Fe-only hydrogenases with high specific activities

Clostridium acetobutylicum ATCC 824 was selected for the homologous overexpression of its Fe-only hydrogenase and for the heterologous expressions of the Chlamydomonas reinhardtii and Scenedesmus obliquus HydA1 Fe-only hydrogenases. The three Strep tag II-tagged Fe-only hydrogenases were isolated with high specific activities by two-step column chromatography. The purified algal hydrogenases evolve hydrogen with rates of around 700 micromol H(2) min(-1) mg(-1), while HydA from C. acetobutylicum (HydA(Ca)) shows the highest activity (5,522 micromol H(2) min(-1) mg(-1)) in the direction of hydrogen uptake. Further, kinetic parameters and substrate specificity were reported. An electron paramagnetic resonance (EPR) analysis of the thionin-oxidized HydA(Ca) protein indicates a characteristic rhombic EPR signal that is typical for the oxidized H cluster of Fe-only hydrogenases.

Sequence conservation and distribution of the fusobacterial immunosuppressive protein gene, fipA

Fusobacterium nucleatum is a gram-negative anaerobe involved in various diseases, including periodontitis. Recently, other investigators isolated the F. nucleatum FDC 364 fusobacterial immunosuppressive protein (FIP). One subunit, FipA, impairs T-cell activation in vitro and shows homology with beta-ketothiolases. However, its distribution and variability among fusobacteria was not reported. Cloned fipA gene sequences from F. nucleatum ssp. polymorphum (ATCC 10953) and F. nucleatum ssp. nucleatum (ATCC 23726) shared 89 and 92% identity, respectively, with FDC 364 fipA, and 90 and 94% identity, respectively, with the FDC 364 FipA predicted amino acid sequence. Southern blot analyses of chromosomal DNA from fusobacterial strains, including F. nucleatum and other Fusobacterium species, were performed using partial fipA sequences as probes. The results indicate that fipA is highly conserved among the F. nucleatum strains examined and that fipA homologues are widely distributed among fusobacteria. A clear relationship between immune suppression, metabolism and the FipA protein remains to be determined.

Physical and genetic map of the Clostridium acetobutylicum ATCC 824 chromosome

A physical and genetic map of the Clostridium acetobutylicum ATCC 824 chromosome was constructed. The macrorestriction map for CeuI, EagI, and SstII was created by ordering the 38 restriction sites by one- and two-dimensional pulsed-field gel electrophoresis (PFGE) and by using an original strategy based on the CeuI enzyme and indirect end labelling by hybridization on both sides of the CeuI sites with rrs (16S RNA) and 3' rrl (23S RNA) probes. The circular chromosome was estimated to be 4.15 Mb in size, and the average resolution of the physical map is 110 kb. The chromosome contains 11 rrn loci, which are localized on 44% of the chromosome in a divergent transcriptional orientation regarding the presumed location of the replication origin. In addition to these 11 rrn operons, a total of 40 identified genes were mapped by hybridization experiments with genes from C. acetobutylicum and from various other clostridia as probes. The genetic map of C. acetobutylicum was compared to that of the three other endospore-forming bacteria characterized so far: Bacillus subtilis, Clostridium beijerinckii, and Clostridium perfringens. Parodoxically, the chromosomal backbone of C. acetobutylicum showed more similarity to that of B. subtilis than to those of the clostridia.

Physiology of carbohydrate to solvent conversion by clostridia

The solvent-forming clostridia have attracted interest because of their ability to convert a range of carbohydrates to end-products such as acetone, butanol and ethanol. Polymeric substrates such as cellulose, hemicellulose and starch are degraded by extracellular enzymes. The majority of cellulolytic clostridia, typified by Clostridium thermocellum, produce a multi-enzyme cellulase complex in which the organization of components is critical for activity against the crystalline substrate. A variety of enzymes involved in degradation of hemicellulose and starch have been identified in different strains. The products of degradation, and other soluble substrates, are accumulated via membrane-bound transport systems which are generally poorly characterized. It is clear, however, that the phosphoenolpyruvate-dependent phosphotransferase system (PTS) plays a major role in solute uptake in several species. Accumulated substrates are converted by intracellular enzymes to end-products characteristic of the organism, with production of ATP to support growth. The metabolic pathways have been described, but understanding of mechanisms of regulation of metabolism is incomplete. Synthesis of extracellular enzymes and membrane-bound transport systems is commonly subject to catabolite repression in the presence of a readily metabolized source of carbon and energy. While many genes encoding cellulases, xylanases and amylases have been cloned and sequenced, little is known of control of their expression. Although the mechanism of catabolite repression in clostridia is not understood, some recent findings implicate a role for the PTS as in other low G-C Gram-positive bacteria. Emphasis has been placed on describing the mechanisms underlying the switch of C. acetobutylicum fermentations from acidogenic to solventogenic metabolism at the end of the growth phase. Factors involved include a lowered pH and accumulation of undissociated butyric acid, intracellular concentration of ATP and reduced pyridine nucleotides, nutrient limitation, and the interplay between pathways of carbon and electron flow. Genes encoding enzymes of solvent pathways have been cloned and sequenced, and their expression correlated with the pattern of end-product formation in fermentations. There is evidence that the initiation of solvent formation may be subject to control mechanisms similar to other stationary-phase phenomena, including sporulation. The application of recently developed techniques for genetic manipulation of the bacterium is improving understanding of the regulatory circuits, but a complete molecular description of the control of solvent formation remains elusive. Experimental manipulation of the pathways of electron flow in other species has been shown to influence the range and yield of fermentation end-products. Acid-forming clostridia can, under appropriate conditions, be induced to form atypical solvents as products. While the mechanisms of regulation of gene expression are not at all understood, the capacity to adapt in this way further illustrates the metabolic flexibility of clostridial strains.

The beta-ketoadipate pathway and the biology of self-identity

The beta-ketoadipate pathway is a chromosomally encoded convergent pathway for aromatic compound degradation that is widely distributed in soil bacteria and fungi. One branch converts protocatechuate, derived from phenolic compounds including p-cresol, 4-hydroxybenzoate and numerous lignin monomers, to beta-ketoadipate. The other branch converts catechol, generated from various aromatic hydrocarbons, amino aromatics, and lignin monomers, also to beta-ketoadipate. Two additional steps accomplish the conversion of beta-ketoadipate to tricarboxylic acid cycle intermediates. Enzyme studies and amino acid sequence data indicate that the pathway is highly conserved in diverse bacteria, including Pseudomonas putida, Acinetobacter calcoaceticus, Agrobacterium tumefaciens, Rhodococcus erythropolis, and many others. The catechol branch of the beta-ketoadipate pathway appears to be the evolutionary precursor for portions of the plasmid-borne ortho-pathways for chlorocatechol degradation. However, accumulating evidence points to an independent and convergent evolutionary origin for the eukaryotic beta-ketoadipate pathway. In the face of enzyme conservation, the beta-ketoadipate pathway exhibits many permutations in different bacterial groups with respect to enzyme distribution (isozymes, points of branch convergence), regulation (inducing metabolites, regulatory proteins), and gene organization. Diversity is also evident in the behavioral responses of different bacteria to beta-ketoadipate pathway-associated aromatic compounds. The presence and versatility of transport systems encoded by beta-ketoadipate pathway regulons is just beginning to be explored in various microbial groups. It appears that in the course of evolution, natural selection has caused the beta-ketoadipate pathway to assume a characteristic set of features or identity in different bacteria. Presumably such identities have been shaped to optimally serve the diverse lifestyles of bacteria.

Identification and analysis of fipA, a Fusobacterium nucleatum immunosuppressive factor gene

We have previously demonstrated that sonic extracts of Fusobacterium nucleatum FDC 364 were capable of inhibiting human T-cell responses to mitogens and antigens. The purified F. nucleatum immunosuppressive protein (FIP) is composed of two subunits of 44 and 48 kDa. Furthermore, FIP inhibits T-cell activation by arresting cells in the middle of the G(1) phase of the cell cycle; the data available to date suggest that FIP impairs the expression of the proliferating-cell nuclear antigen. To initiate delineation of FIP structure-function relationships, molecular cloning of the FIP gene was carried out. A DNA library of F. nucleatum FDC 364 was constructed by partial digestion of genomic DNA with Sau3A and screened for the production of FIP with polyclonal antibody. Twelve immunoreactive clones were identified. One of these clones contained a 3.1-kbp insert and was chosen for further study. Cell lysates were found to contain an immunoreactive band that comigrated with the 44-kDa subcomponent of the native FIP. Sequencing of the 3.1-kpb insert revealed the presence of three open reading frames (ORFs). One ORF extends from nucleotides 415 to 1620, encodes 402 amino acids, and is preceded by a ribosome-binding site. Deletion analysis and antibody elution analysis showed that this ORF encodes the 44-kDa subunit (FipA) of native FIP. A second ORF is situated upstream of fipA. However, Northern (RNA) analysis suggested that fipA is not transcribed as part of an operon but transcribed from its own promotor. Finally, the partially purified recombinant FipA protein was capable of impairing T-cell activation in a manner consistent with the native protein. These results indicate that the two components that form the native protein are most probably distinct gene products and suggest that the 44-kDa FipA polypeptide is sufficient to mediate the immunosuppressive activities of the native protein complex.