The epidermal reservoir; A theoretical approach

Panorama of dissolving microneedles for transdermal drug delivery

Recently, microfabrication technology has been developed to increase the permeability of drugs for transdermal delivery. Microneedles are ultra-small needles usually in the micron size range (different dimensions in micron), generate pores, and allow for delivery of local medication in the systemic circulation via skin. The microneedles have been available in dissolving, solid, coated, hollow, and hydrogel-based microneedles. Dissolving microneedles have been fabricated using micro-molding, photo-polymerization, drawing lithography and droplet blowing techniques. Dissolving microneedles could be a valuable option for the delivery of low molecular weight drugs, peptides, enzymes, vaccines and bio-therapeutics. It consists of water-soluble materials including maltose, polyvinyl pyrrolidone, chondroitin sulfate, dextran, hyaluronic acid, and albumin. The microneedles have almost dissolved after patch removal, leaving only blunt stubs behind, which are easily removable. In this review, we summarize the major building blocks, classification, fabrication techniques, characterization, diffusion models and application of microneedles in diverse area. We also reviewed the regulatory aspects, computational studies, patents, clinical data, and market trends of microneedles.

Modeling drug transport within the viable skin - a review

INTRODUCTION

In the past, mathematical modeling of the transport of transdermal drugs has been primarily focused on the stratum corneum. However, the development of pharmaceutical technologies, such as chemical enhancers, iontophoresis, and microneedles, has led to two outcomes; an increase in permeability in the stratum corneum or the ability to negate the layer entirely. As a result, these outcomes have made the transport of a solute in the viable skin far more critical when studying transdermal drug delivery.

AREAS COVERED

The review will explicitly show the various attempts to model drug transport within the viable skin. Furthermore, a brief review will be conducted on the different models that explain stratum corneum transport, microneedle dynamics and estimation of the diffusion coefficient.

EXPERT OPINION

Future development of mathematical models requires the focus to be changed from traditional diffusion-based tissue models to more sophisticated three-dimensional models that incorporate the physiology of the skin.

Multiscale Modeling of Skin Electroporation

Human skin, the largest external organ of the body, provides a selective barrier to therapeutics applied topically. The molecules having specific chemical and physical properties can only penetrate the deeper layer of the skin. However, the lag time for reaching a steady state in the deeper layer is generally of the order of hours. In order to deliver higher-molecular-weight, charged, and hydrophilic therapeutics in the deeper layer, the skin barrier must be breached. Electroporation is one of the methods used to breach the skin barrier for enhancement of drug permeation and reduction of lag time. However, the underlying mechanism responsible for the enhancement of drug permeation is not well understood. In this study, a multiscale model of skin electroporation is developed by connecting molecular phenomena to a macroscopic model. At the atomic scale, molecular dynamics simulations of the lipid matrix of the human stratum corneum (SC) were performed under the influence of an external electric field. The pores get formed during the electroporation process and the transport properties (diffusivity) of drug molecules are computed. The diffusion coefficient obtained during electroporation was found to be higher than passive diffusion. However, this alone could not explain the multifold increase in the drug flux on application of an electric field as observed in the experiments. Hence, a finite element method (FEM) model of the skin SC is also developed. The release of fentanyl through this model is compared with the available experimental results. Both experimental and simulated results of pore formation on application of an electric field and many folds' increase in drug flux are comparable. Once validated, the framework was used for the design of skin electroporation experiments (in silico) by changing the electric pulse parameters such as voltage, pulse duration, and number of pulses. This multiscale modeling framework provides valuable insight at the molecular and macroscopic levels to design the electroporation experiments. The framework can be utilized as a design tool for skin electroporation applications.

Development of a skin-friendly microemulsion for dermal allergen-specific immunotherapy

Due to their role in immune responses, the skin dendritic cells (i.e. epidermal Langerhans cells and dermal dendritic cells) have become of great interest to researchers in the past decades. A dermal administration of allergens could target these professional antigen-presenting cells directly and build up immunotolerance. Additionally, many of the adverse side effects, which are seen in the current state of the art specific immunotherapy routes, could be avoided. Therefore, in this study a penetration enhancing microemulsion was developed and its physicochemical properties were determined under several storage conditions. The influence of different preservatives on the microemulsion stability was observed. We examined epidermal penetration of Alexa Fluor-647 labelled bee-venom phospholipase A2 (Api m 1) using the Franz diffusion cell set up and confocal laser-scanning microscopy. First results of an in-vivo Api m 1-allergic mouse model indicated the protective efficacy of dermal AIT with our newly developed microemulsion. Summarily, the developed microemulsion is a suitable, stable drug delivery system for the topical administration of proteogenic allergens into the epidermis and is able to reach dendritic cells in the skin.

Mathematical models for dermal drug absorption

INTRODUCTION

Mathematical models of dermal transport offer the advantages of being much faster and less expensive than in vitro or in vivo studies. The number of methods used to create such models has been increasing rapidly, probably due to the steady rise in computational power. Although each of the various approaches has its own virtues and limitations, it may be difficult to decide which approach is best suited to address a given problem.

AREAS COVERED

Here we outline the basic ideas, drawbacks and advantages of compartmental and quantitative structure-activity relationship models, as well as of analytical and numerical approaches for solving the diffusion equation. Examples of special applications of the different approaches are given.

EXPERT OPINION

Although some models are sophisticated and might be used in future to predict transport through damaged or diseased skin, the comparatively low availability of suitable and accurate experimental data limits extensive usage of these models and their predictive accuracy. Due to the lack of experimental data, the possibility of validating mathematical models is limited.

Mathematical models for skin toxicology

INTRODUCTION

Our skin is exposed daily to substances; many of these are neutral and safe but others are potentially harmful. In order to estimate the degree of toxicity and damage to skin tissues when exposed to harmful substances, skin toxicology studies are required. If these studies are coupled with suitably designed mathematical models, they can provide a powerful tool that allows appropriate interpretation of data. This work reviews mathematical models that can be employed in skin toxicology studies.

AREAS COVERED

Two types of mathematical models and their suitability for assessing skin toxicology are covered in this review. The first is focused on predicting penetration rate through the skin from a solute's physicochemical properties, while the second type of models transport processes in skin layers using appropriate equations with the specific aim of predicting the concentration of a given solute in viable skin tissues.

EXPERT OPINION

Mathematical models are an important tool for accurate valuation of skin toxicity experiments, estimation of skin toxicity and for developing new formulations for skin disease therapy. Comprehensive mathematical models of drug transport in skin, especially those based on more physiologically detailed mechanistic considerations of transport processes, are required to further enhance their role in assessing skin toxicology.

Dermic diffusion and stratum corneum: a state of the art review of mathematical models

Transdermal biotechnologies are an ever increasing field of interest, due to the medical and pharmaceutical applications that they underlie. There are several mathematical models at use that permit a more inclusive vision of pure experimental data and even allow practical extrapolation for new dermal diffusion methodologies. However, they grasp a complex variety of theories and assumptions that allocate their use for specific situations. Models based on Fick's First Law found better use in contexts where scaled particle theory Models would be extensive in time-span but the reciprocal is also true, as context of transdermal diffusion of particular active compounds changes. This article reviews extensively the various theoretical methodologies for studying dermic diffusion in the rate limiting dermic barrier, the stratum corneum, and systematizes its characteristics, their proper context of application, advantages and limitations, as well as future perspectives.

Modelling skin penetration using the Laplace transform technique

The Laplace transform is a convenient mathematical tool for solving ordinary and partial differential equations. The application of this technique to problems arising in drug penetration through the skin is reviewed in this paper.

Mathematical and pharmacokinetic modelling of epidermal and dermal transport processes

Topical delivery to the various regions of the skin and underlying tissues, transdermal drug delivery and dermal exposure to environmental chemicals are important areas of research. Mathematical models of epidermal and dermal transport, involving penetration of a solute through various layers of the skin, metabolism in the skin and its subsequent distribution and clearance into systemic circulation from underlying tissues, play an essential role in this research area and are reviewed in this work.

Repeated applications of a transdermal patch: Analytical solution and optimal control of the delivery rate

The integral transform technique was implemented to solve a mathematical model developed for percutaneous drug absorption. The model included repeated application and removal of a patch from the skin. Fick's second law of diffusion was used to study the transport of a medicinal agent through the vehicle and subsequent penetration into the stratum corneum. Eigenmodes and eigenvalues were computed and introduced into an inversion formula to estimate the delivery rate and the amount of drug in the vehicle and the skin. A dynamic programming algorithm calculated the optimal doses necessary to achieve a desired transdermal flux. The analytical method predicted profiles that were in close agreement with published numerical solutions and provided an automated strategy to perform therapeutic drug monitoring and control.

Kinetics of elimination of urinary metabolites of acrylamide in humans

Acrylamide (AM), used in the manufacture of polyacrylamide and grouting agents, is produced during the cooking of foods. Workplace exposure to AM can occur through the dermal and inhalation routes. The objective of this study was to define the kinetics of elimination of AM and its metabolites following oral and dermal administration. This is the second part of a study in which metabolites and hemoglobin adducts of AM were determined in people (Fennell et al., 2005, Toxicol. Sci. 85, 447-459). (1,2,3-(13)C(3))AM was administered in an aqueous solution orally (single dose of 0.5, 1.0, or 3.0 mg/kg) or dermally (three daily doses of 3.0 mg/kg) to sterile male volunteers. Urine samples were collected at 0-2, 2-4, 4-8, 8-16, and 16-24 h following administration orally, or at 0-2, 2-4, 4-8, 8-16, and 16-24 h following each of three daily dermal doses. (13)C(3)-AM and its metabolites in urine, (13)C(3)-glycidamide, (13)C(3)-N-acetyl-S-(3-amino-3-oxopropyl)cysteine and its S-oxide, and (13)C(3)-N-acetyl-S-(3-amino-2-hydroxy-3-oxopropyl)cysteine, were quantitated using liquid chromatography-tandem mass spectrometry. The recovered urinary metabolites accounted for 45.6, 49.9, and 39.9% of a 0.5, 1.0, and 3.0 mg/kg oral dose (0-24 h), respectively, and for 4.5% of the dose after 3 mg/kg was administered daily for 3 days dermally (0-4 days). These results indicate that after oral administration AM is rapidly absorbed and eliminated. The half-life estimated for elimination of AM in urine was 3.1-3.5 h. After dermal administration, AM uptake is slow. This study indicated that skin provides a barrier that slows the absorption of AM, and results in limited systemic availability following dermal exposure to AM.

Methods for assessing risks of dermal exposures in the workplace

The skin as a route of entry for toxic chemicals has caused increasing concern over the last decade. The assessment of systemic hazards from dermal exposures has evolved over time, often limited by the amount of experimental data available. The result is that there are many methods being used to assess safety of chemicals in the workplace. The process of assessing hazards of skin contact includes estimating the amount of substance that may end up on the skin and estimating the amount that might reach internal organs. Most times, toxicology studies by the dermal route are not available and extrapolations from other exposure routes are necessary. The hazards of particular chemicals can be expressed as "skin notations", actual exposure levels, or safe exposure times. Characterizing the risk of a specific procedure in the workplace involves determining the ratio of exposure standards to an expected exposure. The purpose of this review is to address each of the steps in the process and describe the assumptions that are part of the process. Methods are compared by describing their strengths and weaknesses. Recommendations for research in this area are also included.

17beta-estradiol matrixpatch removal and reapplication in postmenopausal women: theoretical predictions with an oscillating diffusion coefficient model

The pharmacokinetic performance of a matrix system for transdermal beta-estradiol (E(2)) delivery after multiple consecutive dosing in postmenopausal women undergoing hormone replacement therapy was investigated. The E(2) plasma profiles determined during the third application in 16 postmenopausal women were compared with results obtained in a published clinical study using the same patch in 24 postmenopausal women without E(2) pretreatment; they were compared with a theoretical diffusion/pharmacokinetic model. A conventional theoretical model with constant model parameter (CPM) obtained from in vitro mass balance experiments in a Franz cell type set up described successfully the transdermal E(2) bioavailability parameter AUC(0-96h) (4341.9 +/- 1513.1; calculated 4250.8) and C(average) (45.0 +/- 13.2; calculated 41.2). Also, experimentally, there was no significant drop in E(2) plasma values after patch removal and reapplication; this was corroborated by calculations. Accumulation of E(2) did not occur when several patches were applied consecutively over a period of 3 weeks. Steady state was achieved following application of the first patch. However, the differences between recorded E(2) plasma profiles and theoretical results detected at specific measurement points cannot be explained by the CPM model. Experimentally obtained plasma profiles were always lower in the morning and higher in the evening than predicted on the basis of the model. Measurements of in vivo skin temperature in the postmenopausal women showed oscillating temperature profiles in the form of a cosinor function: The temperature mesor of untreated postmenopausal women was 34.8 degrees C with an acrophase at 17.0 o'clock (95% CI: 14.30-19.30) and an amplitude of +/- 0.4 degrees C (p = 0.1). During the application of the patch the average temperature next to a patch rose 0.3 degrees C, which was statistically significant (p = 0.1). In the skin under the application of the matrix patch a mesor temperature was detected as 35.6 degrees C with an amplitude of +/- 0.5 degrees C with an acrophase at 17.51 o'clock (95% CI: 14.30-21.00) (p = 0.05). The temperature period was 24 h for all measurements and the maximum temperature was observed at about 16.30 h, and a minimum at about 5.00 h. A linear dependency was detected in in vitro experiments between the log of E(2) permeability and the temperature for stripped skin, epidermis/dermis layer, as well as for the matrix. Modeling of E(2) plasma profiles with oscillating diffusion coefficients (ODM1) with a sine wave function results in this equation: D(1) = D(0x) + Da(x).sin(k.t). D(0x) is the diffusion coefficient determined at 35.6 degrees C, k is 1/24 h, D(a) is the diffusion coefficient of the temperature amplitude, h is hour, and x stands for the respective diffusion layer. It was shown that the experimental E(2) plasma profile variations are more pronounced than can simply be explained by skin temperature variations alone (ODM1 model). A simplex fit with an oscillating diffusion coefficient in the form of a sine wave function for the stratum corneum (ODM2 model) resulted in a temperature amplitude of 1.1 degrees C, about twice as high as was determined in the in vivo measurements (ODM2 model). Therefore, other circadian parameterlike blood flow might superimpose the temperature profile. The improvement in data analysis by incorporating oscillating diffusion coefficients (ODM1 and 2) over CPM was judged from a comparison of experimental data with the calculated plasma profiles with the AIC, Akaikes model selection criterion, which allows ranking between models because it is independent of the scaling of the data points. ODM1 and ODM2 improved the data analysis over CPM by allowing better calculation of experimental C(max), t(max), the time to reach to C(max), and the fluctuation, f. No difference between CPM, ODM1, or ODM2 was found for the bioavailability parameter C(average) and AUC(0-96h).

A distributed parameter physiologically-based pharmacokinetic model for dermal and inhalation exposure to volatile organic compounds

Estimates of dermal dose from exposures to toxic chemicals are typically derived using models that assume instantaneous establishment of steady-state dermal mass flux. However, dermal absorption theory indicates that this assumption is invalid for short-term exposures to volatile organic chemicals (VOCs). A generalized distributed parameter physiologically-based pharmacokinetic model (DP-PBPK), which describes unsteady state dermal mass flux via a partial differential equation (Fickian diffusion), has been developed for inhalation and dermal absorption of VOCs. In the present study, the DP-PBPK model has been parameterized for chloroform, and compared with two simpler PBPK models of chloroform. The latter are lumped parameter models, employing ordinary differential equations, that do not account for the dermal absorption time lag associated with the accumulation of permeant chemical in tissue represented by permeability coefficients. All three models were evaluated by comparing simulated post-exposure exhaled breath concentration profiles with measured concentrations following environmental chloroform exposures. The DP-PBPK model predicted a time-lag in the exhaled breath concentration profile, consistent with the experimental data. The DP-PBPK model also predicted significant volatilization of chloroform, for a simulated dermal exposure scenario. The end-exposure dermal dose predicted by the DP-PBPK model is similar to that predicted by the EPA recommended method for short-term exposures, and is significantly greater than the end-exposure dose predicted by the lumped parameter models. However, the net dermal dose predicted by the DP-PBPK model is substantially less than that predicted by the EPA method, due to the post-exposure volatilization predicted by the DP-PBPK model. Moreover, the net dermal dose of chloroform predicted by all three models was nearly the same, even though the lumped parameter models did not predict substantial volatilization.

A biophysically based dermatopharmacokinetic compartment model for quantifying percutaneous penetration and absorption of topically applied agents. I. Theory

We present a general comprehensive mathematical model to stimulate and predict percutaneous absorption and subsequent disposition of chemicals in vivo that is chiefly based on biophysical parameters estimated or measured with in vitro and ex vivo perfused skin preparations. Current physicochemical principles of drug diffusion and partitioning across the skin barrier, solute and solvent concentration dynamics, the influence of solute and solvent on the stratum corneum barrier, and dynamic vascular perfusion effects are integrated in this model. Such a comprehensive approach is necessary to achieve optimal biological relevance in a quantitative model of percutaneous absorption, particularly when a chemical is applied as a binary (solute and solvent) or more complex formulation or chemical mixture. The proposed model should have applications in (a) designing drugs and permeation enhancers for passive or active (e.g., electrically assisted) transdermal drug delivery, (b) assessing the systemic exposure of topical drugs used in dermatology, and (c) integration into other mathematical models being developed to assess the risk after topical exposure to mixtures of environmental pollutants. We also have included experimental data to provide a preliminary illustration of the performance of the model.

A compartmental model for the prediction of breath concentration and absorbed dose of chloroform after exposure while showering

In order to predict the exhaled breath concentration of chloroform in individuals exposed to chloroform while showering, an existing physiologically based pharmacokinetic (PB-PK) model was modified to include a multicompartment, PB-PK model for the skin and a completely mixed shower exposure model. The PB-PK model of the skin included the stratum corneum as the principal resistance to absorption and a viable epidermis which is in dynamic equilibrium with the skin microcirculation. This model was calibrated with measured exhaled breath concentrations of chloroform in individuals exposed while showering with and without dermal absorption. The calibration effort indicated that the expected value of skin-blood partitioning coefficient would be 1.2 when the degree of transfer of chloroform from shower water into shower air was 61%. The stratum corneum permeability coefficient for chloroform was estimated to be within the range of 0.16-0.36 cm/hr and the expected value was 0.2 cm/hr. The estimated ratio of the dermally and inhaled absorbed doses ranged between 0.6 and 2.2 and the expected value was 0.75. These results indicate that for the purposes of risk assessment for dermal exposure to chloroform, a simple steady-state model can be used to predict the degree of dermal absorption and that a reasonable value of skin permeability coefficient for chloroform used in this model would be 0.2 cm/hr. Further research should be conducted to compare the elimination of chloroform via exhaled breath when different exposure routes are being compared. The model results from this study suggest that multiple measurements of exhaled breath concentrations after exposure may be necessary when making comparisons of breath concentrations that involve different exposure routes.

A novel differentiation method of vehicle models for topically applied drugs: application to a therapeutic timolol patch

A novel method to differentiate basic vehicle models for topically applied drugs is proposed. In this method, the rate of drug release as a function of time, obtained by using a flow-through cell, is plotted on both semilogarithmic and logarithmic scales. In the Solution Case, where all of the drug is dissolved in the vehicle, the profiles become linear on the semilogarithmic scale. However, in the Suspension Case, where the initial drug amount per vehicle volume is greater than the solubility of the drug and the vehicle contains finely dispersed drug, the profiles are linear on the logarithmic scale with a slope of -0.5. They abruptly depart from this pattern upon depletion of the suspended phase. The different attributes of the profiles for the drug release rate-time curves in these two cases can be visualized more clearly when vehicle thickness and drug concentration are varied. The theoretical principles are illustrated in profiles for the drug release-rate time plots of therapeutic patches containing the beta blocker timolol. This was formulated at different concentrations in an acryl copolymer with varied thickness. The release profiles were best fitted to the Solution Case treatment of the data.

Pharmacodynamic measurements of methyl nicotinate percutaneous absorption: the effect of aging on microcirculation

The penetration of drugs through aged skin is important both in terms of transdermal delivery to elicit systemic pharmacological effects, and for topical treatment. Cutaneous microcirculation efficiency, an integral parameter in the overall process of percutaneous absorption, was studied in young (20-34 years) and old (64-86 years) individuals. Cutaneous erythema as induced by topical administration of methyl nicotinate to the ventral forearm, was monitored non-invasively using laser-Doppler flowmetry. Dose-response behaviour was characterized by five parameters: (i) the time of onset of action; (ii) the time to reach maximum response; (iii) the magnitude of the maximum response; (iv) the area under the response-time curve; and (v) the time to decay to 75% of the maximum response. Additionally, the sensitivity and efficiency of the cutaneous microcirculation in both age groups was evaluated using a pharmacokinetic-pharmacodynamic model. Statistical analysis of all data showed no significant differences between the age groups for the same concentrations. The results indicate that microvessel reactivity to the applied stimulus is comparable in the ventral forearm of both young and old populations.

Percutaneous absorption of steroids: relative contributions of epidermal penetration and dermal clearance

The permeation of triamcinolone, hydrocortisone, prednisolone, corticosterone, triamcinolone acetonide, testosterone, and betamethasone-17-valerate through excised human stratum corneum was quantified. The time course of permeation could be adequately described by a simple diffusion model suggesting that shunt transport may not be important. The disappearance of these steroids from aqueous solutions applied to human and rat dermis was also monitored. The concentrations of unbound steroid in the viable epidermis appeared to be mainly related to the blood perfusion rate in the dermis and, more importantly, to the lipophilicity of the steroid. The most lipophilic steroids penetrated the human epidermis at the fastest rates but are cleared from the viable epidermis at rates comparable to those found for more polar steroids.

The isolated perfused porcine skin flap. III. Percutaneous absorption pharmacokinetics of organophosphates, steroids, benzoic acid, and caffeine

The isolated perfused porcine skin flap (IPPSF) has been developed as an alternative in vitro tool for examining the pharmacokinetics and mechanisms of percutaneous absorption. In this study, dosing solutions of seven 14C-radiolabeled compounds representing three chemical classes--organic acid/base [benzoic acid (B), caffeine (C)], organophosphate (OP) pesticides (diisopropylfluorophosphidate, malathion, parathion), and steroid hormones (progesterone, testosterone)--were prepared in ethanol and applied topically at a surface concentration of 40 micrograms cm-2 to the IPPSF. A three-compartment pharmacokinetic model used to stimulate mass transfer from the surface (C1), diffusion through epidermis and dermis (C2), and transfer into the capillary perfusate (C3), was developed based on flux through the IPPSF from 0 to 8 hr. This basic model accurately stimulated measured IPPSF fluxes for five of seven compounds, including the OPs and steroids. The model was modified to simulate the shunting of drug to fast and slow release pathways, which occurred for B 3-4 hr postapplication, and to account for flow-dependent flux increases seen for C at 6 hr postapplication. The latter may be due to a direct pharmacologic effect, since C is a known vasodilator. Extrapolated (to 6 days) areas under the curve from the model simulations were compared with in vivo percutaneous absorption estimates, obtained from 6-day excretion studies in pigs. The in vivo-in vitro correlation, based on simple linear regression across compounds, was excellent (R2 = 0.88, R = 0.94, p less than 0.002). These results suggest that xenobiotic penetration in the 8-hr IPPSF experiments is highly predictive of in vivo absorption totals (6-day studies). In addition, since pig and human skin are similar physiologically and pharmacologically, the IPPSF may eventually have applications in formulating human dermal risk assessment models.

Measurement of the stratum corneum drug reservoir to predict the therapeutic efficacy of topical iododeoxyuridine for herpes simplex virus infection

A rapid, in vivo measurement of the penetration of antiviral compounds into the skin would improve our ability to predict the therapeutic efficacy of topical treatments for herpes simplex virus (HSV) infection. We have studied the concentration of iododeoxyuridine (IDU) in the stratum corneum of guinea pig skin by tape stripping at different time points after single and multiple topical doses of the drug. These results were correlated with the efficacy of topical IDU against an experimental cutaneous HSV infection. Ten adhesive tape strippings were performed on depilated guinea pig dorsum in vivo at serial intervals after a single topical dose of [3H]IDU. Iododeoxyuridine levels in the stratum corneum peaked at 1-3 h (67-70 mg/g of tissue) and then gradually declined over the next 3-24 h. We hypothesized that the peak IDU stratum corneum concentration would correlate with therapeutic efficacy. Accordingly, we determined the quantity of IDU in guinea pig stratum corneum 2 h after a topical application of seven different concentrations of IDU in dimethylsulfoxide (DMSO) and examined the in vivo efficacy of these formulations in an experimental dorsal cutaneous HSV-1 infection in guinea pigs. The results showed an excellent correlation between the quantity of IDU in the stratum corneum and reduction in lesion severity (r = 0.95-0.97). Fifteen percent IDU in DMSO provided the highest therapeutic efficacy (90-94%). We also studied the relationship between the clinical efficacy of different dosing frequencies and the amount of IDU in the stratum corneum. Serial IDU stratum corneum concentrations were measured over 24 h following 1, 2, 3, or 4 applications per day of 1, 3, and 15% IDU in DMSO treatments and parallel efficacy studies of the different regimens were conducted in the animal model. Within each dosing frequency, the cumulative amount of drug in the stratum corneum correlated with the strength of the test formulation and with efficacy in the animal model. For each of the three formulations, increasing the number of daily doses from one up to three led to progressive increases in cumulative stratum corneum IDU levels and clinical efficacy. An increase in the number of daily applications to four had little effect on drug efficacy and was associated with a plateau in stratum corneum IDU levels. Stratum corneum IDU concentrations were rapid and easy to determine and correlated well with clinical events.(ABSTRACT TRUNCATED AT 400 WORDS)

Effect of exercise and heat exposure on percutaneous absorption of methyl salicylate

The effects of exercise, heat exposure or both on the percutaneous absorption of methyl salicylate were studied in 6 healthy volunteers. Exercise was performed to 30% of VO2max, 45 min each hour for 6 h, at ambient temperatures of 22 degrees C or 40 degrees C. Systemic availability was assessed by measurement of plasma salicylate concentrations and cumulative urinary salicyluric acid excretion over an 8-h collection period. The absorption of methyl salicylate was increased to more than 3-times above control in subjects exercising in the heat. It is concluded that exercise and heat exposure, by increasing skin temperature, hydration and blood flow, enhance the percutaneous absorption of methyl salicylate.

Absorption of materials by or through the living skin

Synopsis The skin comes into contact with a large range of materials either deliberately or inadvertently. It should be possible to predict the exact transport rates of these materials through the skin as a function of the physicochemical properties of the different compounds. With this sort of knowledge it is possible to predict the exact disposition of compounds and use this in the formulation of new products both in the pharmaceutical and cosmetic field. The information will also be useful from the standpoint of skin toxicology and environmental health. In order to be able to predict this complex process it is necessary to split the overall transport into different component parts. This article will identify these components and provide illustrations. The major areas discussed will be barrier function of the skin, the release properties of different topical formulations and how these may be monitored. Novel means of enhancing the penetration of drugs will be discussed and how some additives that are incorporated into formulations will perhaps alter the barrier function of skin. A mathematical model describing skin penetration has been developed and its use in predicting blood levels will be described. This model has been tested both in animal experiments and in limited human studies and its relevance to these situations will be highlighted. Absorption cutanée et transcutanée in vivo.

Percutaneous absorption in man: a kinetic approach

A biophysically based kinetic model of chemical absorption via human skin was developed and applied to the penetration kinetics of 12 chemicals: aspirin, benzoic acid, benzyl nicotinate, caffeine, chloramphenicol, colchicine, dinitrochlorobenzene, diethyltoluamide, malathion, methyl nicotinate, nitrobenzene, and salicylic acid. The pharmacokinetic model is linear and includes four first-order rate constants: (1) k1 describes penetrant diffusion through the stratum corneum; (2) k2 relates to further transport across the viable epidermal tissue to the cutaneous blood vessels; (3) k3 is a parameter which delays the partitioning of penetrant at the stratum corneum-viable tissue interface and, in conjunction with k2, reflects the penetrant's relative affinity for the stratum corneum over the viable tissue; and (4) k4 characterizes the elimination rate of chemical from blood to urine. Previously determined diffusion coefficients and molecular weight corrections were used to estimate k1 and k2; k4 values employed were those measured experimentally. Urinary excretion rate data following topical administration were simulated and k3 was estimated for each penetrant by optimizing the fit of the model to the data points. Ratios of k3/k2 should be related to the partition coefficients for the chemicals between stratum corneum and viable tissue and it was shown that these ratios agreed reasonably well with the corresponding octanol-water partition coefficients. This approach may have potential for predicting the general percutaneous absorption kinetics of chemicals based on recognized cutaneous biology and penetrant molecular weight and lipophilicity.

Prediction of drug disposition kinetics in skin and plasma following topical administration

The development of a physically based pharmacokinetic model for percutaneous absorption is described. The simulation includes four first-order rate constants assigned the following significance: (a) absorption across the stratum corneum; (b) diffusion through the viable tissue; (c) a retardation process which retains penetrant in the stratum corneum (and hence provides a means to mathematically produce a "reservoir" effect, for example); and (d) uptake from the skin into the systemic circulation and subsequent elimination from the body. The kinetic equations of the model are solved and expressions are obtained for the concentration of penetrant within the stratum corneum (and available to subsequently partition into the viable epidermis) and the plasma concentration of the administered substance, as a function of time. Using example values for the four rate parameters, disposition profiles for the penetrant in skin and plasma were derived. The cases considered cover slow and fast stratum corneum penetrants, substances which are excreted rapidly or slowly from the body, and absorbing molecules with a variety of relative stratum corneum-viable tissue affinities. The results suggest a framework for the prediction of pharmaceutically and clinically relevant information following the topical administration of therapeutic agents for local or systemic effect.

Physicochemical interpretation of the pharmacokinetics of percutaneous absorption

Theoretical expressions are derived to predict the amount of a drug reaching the dermal capillaries as a function of simple physicochemical parameters. The mathematical approach involves the solution of the diffusion equation for the drug in the skin using the technique of Laplace transformation. First-order kinetics are assumed for the absorption of drug from the vehicle into the skin and for uptake into the capillaries. The relative importance of these different processes (absorption from vehicle, diffusion through the skin, and capillary removal) involved in the percutaneous penetration of a drug is discussed, and their influence upon the time course of the absorption phenomenon is illustrated.