Drug release from oral mucosal adhesive tablets of chitosan and sodium alginate

Fabrication of Ca-alginate microspheres by diffusion-induced gelation in double emulsion droplets for oral insulin

Sodium alginate has good biocompatibility and is widely used in the study of drug carriers. In this paper, a method to prepare calcium alginate microspheres with high sphericity based on double emulsion droplets was proposed, in which sodium alginate is used as the innermost phase. By adjusting the density of the system, the double-emulsion droplets could be suspended in the collecting solution, leading to the homogeneous reaction between the sodium alginate droplets and the calcium ions. By changing the flow rate, the size of the droplets could be changed, and by changing the concentration of calcium ions in the collecting solution, the sphericity of the calcium alginate microspheres could be changed. Then the swelling properties and drug release properties of calcium alginate microspheres were determined. The drug delivery study revealed that the insulin-loaded Ca-Alginate microspheres were able to decrease blood glucose by 41.4 % after oral administration to mice. Thus, the Ca-Alginate microsphere is a suitable candidate for controlled pH-sensitive drug delivery.

Alginate-based matrix tablets for drug delivery

INTRODUCTION

As a nature-derived polymer with swelling and gelling properties, alginate has found wide biopharma-relevant applications. However, there is comparatively limited attention on alginate in tablet formulations. Therefore, this review aimed to provide an overview of the applications of alginate in solid dosage form formulations.

AREAS COVERED

This review outlines the role of alginate for oral sustained release formulations. For better insights into its application in drug delivery, the mechanisms of drug release from alginate matrices are discussed alongside the alginate inherent properties and drug properties. Specifically, the influence of alginate properties and formulation components on the resultant alginate gel and subsequent drug release is reviewed. Modifications of the alginate to improve its properties in modulating drug release are also discussed.

EXPERT OPINION

Alginate-based matrix tablets is useful for sustaining drug release. As a nature-derived polymer, batch consistency and stability raise some concerns about employing alginate in formulations. Furthermore, the alginate gel properties can be affected by formulation components, pH of the dissolution environment and the tablet matrix micro-environment pH. Conscientious efforts are pivotal to addressing these formulation challenges to increase the utilization of alginate in oral solid dosage forms.

Induction of protein specific antibody by carbonated hydroxy apatite as a candidate for mucosal vaccine adjuvant

Buccal mucosae are considered as a site for vaccine delivery since they are relatively abundant with antigen-presenting dendritic cells, mainly Langerhans cells. In this study, we formulated carbonated hydroxy apatite (CHA) with ovalbumin (OVA) (denoted as CHA-OVA), incorporated it into bilayer buccal membrane to form hydrogel films containing CHA-OVA complex for vaccination via buccal mucosae. Ethylcellulose blend with polyethylene glycol 400 were used as impermeable backing layer. Physical properties of all tested buccal membranes were found suitable for mucosal application. In vitro and ex vivo release study showed there was no burst release of OVA found from all tested formula. From the in vivo examination, rabbit buccal mucosae vaccinated by mucoadhesive membranes containing CHA-OVA complex demonstrated mucosal specific antibody induction, represented the potential of CHA as a candidate of needle-free vaccine adjuvant. Future research is awaiting to investigate proper CHA crystallinity in complex with protein against targeted diseases.

Sodium alginate and alginic acid as pharmaceutical excipients for tablet formulation: Structure-function relationship

Alginic acid and its sodium salt are well-accepted pharmaceutical excipients fulfilling several roles in the development of solid oral dosage forms. Although they have attractive advantages as safety, abundance, relatively low cost and biodegradability, these natural polysaccharides possess a high variability that may limit their use as excipients for tablet formulation. Thus, to obtain robust formulations and high-quality drug products with consistent performance a complete understanding of the structure-property relationship becomes necessary as the structure of alginates affects both, technological and biopharmaceutical properties. This review compiles the compaction studies carried out that relate the structure of alginates to their mechanical and dissolution performances. The different analytical methods used to determine the chemical composition, primary structure and molecular weight distribution, major factors affecting the behavior of alginates in direct compression, are also exposed. Finally, different strategies reported to improve the properties of alginic acid as direct compression excipient are discussed.

Locally Applied Slow-Release of Minocycline Microspheres in the Treatment of Peri-Implant Mucositis: An Experimental In Vivo Study

BACKGROUND

The objective of this is preclinical investigation was to evaluate the differential drug sustainability and pharmacodynamic properties of two local minocycline microsphere carriers: chitosan-coated alginate (CA) and poly(meth)acrylate-glycerin (PG).

METHODS

Four dental implants were placed unilaterally in the edentulous mandible of six beagle dogs. Each implant was randomly assigned to receive one of the following four treatments: (i) CA (CA-based minocycline), (ii) placebo (CA substrate without minocycline), (iii) PG (PG-based minocycline) and (iv) control (mechanical debridement only). After inducing peri-implant mucositis, the randomly assigned treatments were administered into the gingival sulcus twice at a 4-week interval using a plastic-tipped syringe. Drug sustainability and pharmacodynamic (clinical, radiographical and cell marker intensity) evaluations were performed after each administration.

RESULTS

The CA microspheres remained longer around the healing abutment compared to the PG microspheres at both administrations and a longer bacteriostatic effect was observed from CA (7.0 ± 5.7 days) compared to PG (1.2 ± 2.6 days). The efficacy of the applied therapies based on clinical, radiographical and histological analyses were comparable across all treatment groups.

CONCLUSIONS

CA microspheres showed longer carrier and bacteriostatic effect sustainability when compared to PG microspheres, however, longer drug sustainability did not lead to improved treatment outcomes.

The Use of Chitosan, Alginate, and Pectin in the Biomedical and Food Sector-Biocompatibility, Bioadhesiveness, and Biodegradability

Nowadays, biopolymers as intelligent and active biopolymer systems in the food and pharmaceutical industry are of considerable interest in their use. With this association in view, biopolymers such as chitosan, alginate, pectin, cellulose, agarose, guar gum, agar, carrageenan, gelatin, dextran, xanthan, and other polymers have received significant attention in recent years due to their abundance and natural availability. Furthermore, their versatile properties such as non-toxicity, biocompatibility, biodegradability, and flexibility offer significant functionalities with multifunctional applications. The purpose of this review is to summarize the most compatible biopolymers such as chitosan, alginate, and pectin, which are used for application in food, biotechnological processes, and biomedical applications. Therefore, chitosan, alginate, and pectin are biopolymers (used in the food industry as a stabilizing, thickening, capsular agent, and packaging) with great potential for future developments. Moreover, this review highlights their characteristics, with a particular focus on their potential for biocompatibility, biodegradability, bioadhesiveness, and their limitations on certain factors in the human gastrointestinal tract.

Design and optimization of novel in situ gel of mercaptopurine for sustained drug delivery

Mercaptopurine is a purine antagonist, belonging to the class of antimetabolites. Its oral absorption is erratic and variable throughout GIT, with bioavailability of 5-37% and belongs to Biopharmaceutical Classification System (BCS) class IV. The focus of the present study was to improve solubility of mercaptopurine and to release the drug uniformly throughout the GIT by formulating into a novel in situ gel tablet. By in vitro swelling studies, xanthan gum was selected as the best gelling polymer and the tablets were prepared by direct compression. Sodium chloride was used as a release modifier to improve the release of drug from the tablet. A 32 full factorial design was applied to optimize the percentage of xanthan gum and sodium chloride to get desired swelling index and release profile. Tablets were evaluated for weight variation, hardness, friability, disintegration time, drug content, in vitro swelling studies and in vitro dissolution studies. The best optimized formulation showed good swelling index and extended the release up to 12 h, where as conventional tablet released the drug within 45 min. The results indicate that mercaptopurine loaded in situ gel tablet could be effective in sustaining drug release for a prolonged period of time throughout the GIT, which can possibly improve the oral bioavailability.

Curcumin-containing chitosan nanoparticles as a potential mucoadhesive delivery system to the colon

In the present study, we investigate the mucoadhesive characteristics and release of the anticancer agent curcumin, contained in chitosan nanoparticles (CS-NPs). Such a system has potential therapeutic benefits in the treatment of colon cancer through prolonged retention and delivery. The CS-NPs were ionically gelled with tripolyphosphate (TPP) and registered an isoelectric pH of 6.2 (z-average diameter of 214 nm ± 1.0 nm). pH variations around the isoelectric point caused a reduction in CS-NPs electrical charge which correspondingly increased the z-average due to agglomeration. Curcumin release from CS-NPs was slowest at chitosan to TPP weight ratio of 3:1, with a significant retention (36%) at the end of 6 h. Adsorption isotherms of mucin on CS-NPs fitted both the Freundlich and Langmuir models, suggesting a monolayer-limited adsorption on heterogeneous sites with varied affinities. Encapsulated curcumin exerted an influence on the adsorption of mucin due to H-bonding as well as π-π interactions between the phenolic moieties of curcumin and mucin.

Preparation and evaluation of alginate-chitosan microspheres for oral delivery of insulin

The alginate-chitosan microspheres with narrow size distribution were prepared by membrane emulsification technique in combination with ion (Ca(2+)) and polymer (chitosan) solidification. The preparation procedure was observed, and the physical properties (particle size distribution, surface morphology, chitosan distribution, zeta potential) of the microspheres were characterized. Subsequently, the microspheres were employed to load model peptide of insulin. The effect of loading ways on the loading efficiency and immunological activity of insulin were investigated. It was shown that the higher loading efficiency (56.7%) and remarkable activity maintenance (99.4%) were obtained when the insulin was loaded during the chitosan solidification process (Method B). Afterward, the release profile in vitro for the optimal insulin-loaded microspheres was investigated. Under the pH conditions of gastrointestinal environment, only 32% of insulin released during the simulated transit time of drug (2 h in the stomach and 4 h in the intestinal). While under the pH condition of blood environment, insulin release was stable and sustained for a long time (14 days). Furthermore, the chemical stability of insulin released from the microspheres was well preserved after they were treated with the simulated gastric fluid containing pepsin for 2 h. Finally, the blood glucose level of diabetic rats could be effectively reduced and stably kept for a long time (∼60 h) after oral administration of the insulin-loaded alginate-chitosan microspheres. Therefore, the alginate-chitosan microspheres were found to be promising vectors showing a good efficiency in oral administration of protein or peptide drugs.

Formulation of a novel tianeptine sodium orodispersible film

The present investigation was undertaken with the objective of formulating orodispersible film(s) of the antidepressant drug tianeptine sodium to enhance the convenience and compliance by the elderly and pediatric patients. The novel film former, lycoat NG73 (granular hydroxypropyl starch), along with different film-forming agents (hydroxypropyl methyl cellulose, hydroxyethyl cellulose, and polyvinyl alcohol), in addition to three film modifiers; namely, maltodextrin, polyvinyl pyrrolidone K90 and lycoat RS780 (pregelatinized hydroxypropyl starch) were evaluated. Eight formulae were prepared by the solvent-casting method; and were evaluated for their in vitro dissolution characteristics, in vitro disintegration time, and their physico-mechanical properties. The promising orodispersible film based on lycoat NG73 (F1); showing the greatest drug dissolution, satisfactory in vitro disintegration time and physico-mechanical properties that are suitable for orodispersible films, was evaluated for its bioavailability compared with a reference marketed product (Stablon® tablets) in rabbits. Statistical analysis revealed no significant difference between the bioavailability parameters (C(max) (ng/ml), t(max) (h), AUC(0-t) (ng hml(-1)), and AUC(0-∞) (ng hml(-1))] of the test film (F1) and the reference product. The mean ratio values (test/reference) of C(max) (89.74%), AUC(0-t) (110.9%), and AUC(0-∞) (109.21%) indicated that the two formulae exhibited comparable plasma level-time profiles. These findings suggest that the fast orodispersible film containing tianeptine is likely to become one of choices for acute treatment of depression.

Effect of pH on drug release from polysaccharide tablets

Controlled release formations of drugs were prepared with matrix materials of the natural polysaccharides sodium alginate and +/--carrageenan. The drugs used were sodium salicylate (anionic) and lidocaine-HCl (cationic). The release characteristics of the drugs were studied under different pH and compositions of aqueous media. The cationic drug (lidocaine-HCl) was released more slowly than the anionic one (sodium salicylate) because of the negative charge of the matrices. The release from both sodium alginate and +/--carrageenan tablet was retarded in acidic medium. At the same pH of the medium, the release into buffer solutions (containing metallic cations Na(+) and K(+), respectively) was slower than into HC1 solution.

Bioadhesive controlled metronidazole release matrix based on chitosan and xanthan gum

Metronidazole, a common antibacterial drug, was incorporated into a hydrophilic polymer matrix composed of chitosan xanthan gum mixture. Hydrogel formation of this binary chitosan-xanthan gum combination was tested for its ability to control the release of metronidazole as a drug model. This preparation (MZ-CR) was characterized by in vitro, ex vivo bioadhesion and in vivo bioavailability study. For comparison purposes a commercial extended release formulation of metronidazole (CMZ) was used as a reference. The in vitro drug-release profiles of metronidazole preparation and CMZ were similar in 0.1 M HCl and phosphate buffer pH 6.8. Moreover, metronidazole preparation and CMZ showed a similar detachment force to sheep stomach mucosa, while the bioadhesion of the metronidazole preparation was higher three times than CMZ to sheep duodenum. The results of in vivo study indicated that the absorption of metronidazole from the preparation was faster than that of CMZ. Also, MZ-CR leads to higher metronidazole C(max) and AUC relative to that of the CMZ. This increase in bioavailability might be explained by the bioadhesion of the preparation at the upper part of the small intestine that could result in an increase in the overall intestinal transit time. As a conclusion, formulating chitosan-xanthan gum mixture as a hydrophilic polymer matrix resulted in a superior pharmacokinetic parameters translated by better rate and extent of absorption of metronidazole.

Sustained Release Characteristics of Tablets Prepared with Mixed Matrix of Sodium Carrageenan and Chitosan: Effect of Polymer Weight Ratio, Dissolution Medium, and Drug Type

The interpolymeric complexation of carrageenan and chitosan was investigated for its effect on drug release from polymeric matrices in comparison to single polymers. For this purpose, matrices with carrageenan: chitosan (CG:CS) ratios of 100%, 75%, 50%, 25%, and 0% were prepared at 1:1 drug to polymer ratio. The effect of dissolution medium and drug type on drug release from the formulations was addressed. Two model drugs were utilized: diltiazem HCl (DZ) as a salt of a basic drug and diclofenac Na (DS) as a salt of an acidic drug. Three dissolution media were used: water, simulated gastric fluid (SGF), and simulated intestinal fluid (SIF). Some combinations of the two polymers showed remarkable sustained release effect on DZ in comparison to the single polymers in water and SGF. However, no apparent effect for the combination on DZ release was shown in SIF. The medium effect was explained by the necessity of chitosan ionization, which could be attained by the acidic SGF or microacidic environment created by the used acidic salt of DZ in water, but not in SIF. An interaction between the medium type and CG:CS ratio was also found. With DS, the polymer combinations had similar dissolution profiles to those of the single polymers in water and SIF, which was explained by the lack of chitosan ionization by the medium or the drug basic salt. The dissolution profiles could not be obtained in SGF, which was attributed to the conversion of DS into diclofenac free acid. The importance of chitosan ionization for its interaction with CG to have an effect on the release of DS was demonstrated by performing dissolution of SGF presoaked tablets of DS in SIF, which showed an effect of combining the two polymers on sustaining the drug release.

Marine derived polysaccharides for biomedical applications: chemical modification approaches

Polysaccharide-based biomaterials are an emerging class in several biomedical fields such as tissue regeneration, particularly for cartilage, drug delivery devices and gelentrapment systems for the immobilization of cells. Important properties of the polysaccharides include controllable biological activity, biodegradability, and their ability to form hydrogels. Most of the polysaccharides used derive from natural sources; particularly, alginate and chitin, two polysaccharides which have an extensive history of use in medicine, pharmacy and basic sciences, and can be easily extracted from marine plants (algae kelp) and crab shells, respectively. The recent rediscovery of poly-saccharidebased materials is also attributable to new synthetic routes for their chemical modification, with the aim of promoting new biological activities and/or to modify the final properties of the biomaterials for specific purposes. These synthetic strategies also involve the combination of polysaccharides with other polymers. A review of the more recent research in the field of chemical modification of alginate, chitin and its derivative chitosan is presented. Moreover, we report as case studies the results of our recent work concerning various different approaches and applications of polysaccharide-based biomaterials, such as the realization of novel composites based on calcium sulphate blended with alginate and with a chemically modified chitosan, the synthesis of novel alginate-poly(ethylene glycol) copolymers and the development of a family of materials based on alginate and acrylic polymers of potential interest as drug delivery systems.

Effect of oppositely charged polymer and dissolution medium on swelling, erosion, and drug release from chitosan matrices

The reasons for retarded release of naproxen sodium from the chitosan matrices at different pH include poor aqueous solubility of drug, the formation of a rate-limiting polymer gel barrier along the periphery of matrices, the interaction of naproxen sodium with protonated amino groups of chitosan, and the interaction of ionized amino groups of chitosan with ionized sulfate groups of kappa-carrageenan.

Preparation of dual crosslinked alginate–chitosan blend gel beads and in vitro controlled release in oral site-specific drug delivery system

Alginate-chitosan (ALG-CS) blend gel beads were prepared based on Ca2+ or dual crosslinking with various proportions of alginate and chitosan. The homogeneous solution of alginate and chitosan was dripped into the solution of calcium chloride; the resultant Ca2+ single crosslinked beads were dipped in the solution of sodium sulfate sequentially to prepare dual crosslinked beads. The dual crosslinkage effectively promoted the stability of beads under gastrointestinal tract conditions. The sustained release profiles of single and dual crosslinked gel beads loaded bovine serum albumin (BSA), a model protein drug, were investigated in simulated gastric fluid (SGF), simulated intestinal fluid (SIF) and simulated colonic fluid (SCF). In SGF, compared to Ca2+ single crosslinked beads, from which BSA released fast and the cumulative drug release percentages were about 80% of all formations in 4 h, the BSA total release from dual crosslinked gel beads was no more than 3% in 8 h. In SIF and SCF, Ca2+ single crosslinked beads were disrupted soon associating with the fast drug release. As to the dual crosslinked beads, the BSA total release from the ALG-CS mass ratio 9:1 (81.24%) was higher than that of 7:3 and 5:5 (less than 60%) in 8 h in SIF; the BSA release from all beads was much faster in SCF than in SIF. The dual crosslinked beads incubated in gastrointestinal tract conditions, the BSA cumulative release of ALG-CS mass ratios 9:1, 7:3 and 5:5 were respectively 2.35, 1.96, 1.76% (in SGF 4 h), 82.86, 78.83, 52.91% (in SIF 3 h) and 97.84, 96.81, 87.26% (in SCF 3 h), which suggested that the dual crosslinked beads have potential small intestine or colon site-specific drug delivery property.

Polyionic hydrocolloids for the intestinal delivery of protein drugs: alginate and chitosan--a review

The protein pharmaceutical market is rapidly growing, since it is gaining support from the recombinant DNA technology. To deliver these drugs via the oral route, the most preferred route, is the toughest challenge. In the design of oral delivery of peptide or protein drugs, pH sensitive hydrogels like alginate and chitosan have attracted increasing attention, since most of the synthetic polymers are immunogenic and the incorporation of proteins in to these polymers require harsh environment which may denature and inactivate the desired protein. Alginate is a water-soluble linear polysaccharide composed of alternating blocks of 1-4 linked alpha-L-guluronic and beta-D-mannuronic acid residues where as chitosan is a co polymer of D-glucosamine and N-acetyl glucosamine. The incorporation of protein into these two matrices can be done under relatively mild environment and hence the chances of protein denaturation are minimal. The limitations of these polymers, like drug leaching during preparation can be overcome by different techniques which increase their encapsulation efficiency. Alginate, being an anionic polymer with carboxyl end groups, is a good mucoadhesive agent. The pore size of alginate gel microbeads has been shown to be between 5 and 200 nm and coated beads and microspheres are found to be better oral delivery vehicles. Cross-linked alginate has more capacity to retain the entrapped drugs and mixing of alginate with other polymers such as neutral gums, pectin, chitosan, and eudragit have been found to solve the problem of drug leaching. Chitosan has only limited ability for controlling the release of encapsulated compound due to its hydrophilic nature and easy solubility in acidic medium. By simple covalent modifications of the polymer, its physicochemical properties can be changed and can be made suitable for the peroral drug delivery purpose. Ionic interactions between positively charged amino groups in chitosan and the negatively charged mucus gel layer make it mucoadhesive. The favourable properties like biocompatibility, biodegradability, pH sensitiveness, mucoadhesiveness, etc. has enabled these polymers to become the choice of the pharmacologists as oral delivery matrices for proteins.

Alginate microparticles prepared by spray–coagulation method: Preparation, drug loading and release characterization

A spray-coagulation method was developed for the preparation of large scale of porous alginate microparticles. The effect of three variables on porosity was evaluated: (1) alginate solution concentration (2) the concentration of CaCl2 in the coagulation medium and (3) the ratio of guluronic acid to manuronic acid of the alginate. Methylene blue (MB), a highly water-soluble compound and a practically water-insoluble compound, 4-phenylazoaniline (PAA) were used as the model drugs to study drug loading and release characteristics from alginate microparticles. The release of the model compounds from the microparticles was found to depend upon the release medium. Incomplete in vitro release of both model drugs in deionized (DI) water was observed. The release of MB in simulated gastrointestinal fluid (0.1N HCl) was fast and complete, while the release of PAA was slow in 0.1N HCl and fast in phosphate buffer solution (pH 6.8). Interactions between the model drugs and alginate microparticles were identified from scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR) analysis. The results indicated that (1) porous alginate microparticles can be produced by the spray-coagulation method; (2) drugs can be loaded by the adsorption method; (3) and the obtained microparticles may be used for delaying the release of drugs of low water solubility in acidic conditions.

Characteristics of interpolyelectrolyte complexes of Eudragit E 100 with sodium alginate

With a view to the application in oral drug delivery formulations, the possibility to form interpolyelectrolyte complexes (IPEC) of Eudragit E 100 (EE) with sodium alginate (AL) was investigated, employing turbidimetry, apparent viscosity measurements, FT-IR and elementary analysis. The interaction or binding ratio of a unit molecule of AL with EE was largely affected by the pH value of the media, showing a change from 1.5:1 to 1:1.25 (0.66<Z<1.25) with increase in pH value from 2.5 to 6.0. Based on the results of elementary analysis and FT-IR, the interaction ratio of each component in the solid complexes was very close to that observed in turbidity and apparent viscosity measurements thus proving that the synthesized products actually can be considered as IPEC.

Characteristics of interpolyelectrolyte complexes of Eudragit E100 with Eudragit L100

With a view to the application in oral controlled drug delivery systems, the formation of interpolyelectrolyte complexes (IPEC) between Eudragit E100 (EE) and Eudragit L100 (EL) was investigated, using turbidimetry, solution viscosity measurements and elementary analysis. The structure of the synthesized IPEC was investigated by using FT-IR spectroscopy. The binding ratio of a unit molecule of EL with EE was found to be approximately 1:1 in pH 6.0. Based on the results of elementary analysis, and FT-IR, the binding ratio of each component in the solid complexes was very close to that observed in turbidity and viscosity measurements and indicate that the synthesized products can be considered as IPEC. Due to the structure of the IPEC, two maxima were observed in the swelling behaviour as a function of pH. The release of the model drug ibuprofen was significantly retarded from tablets made up of the IPEC.

Preparation and evaluation of a chitosan salt–poloxamer 407 based matrix for buccal drug delivery

The aim of this work was to prepare and evaluate a matrix for buccal drug delivery composed of a chitosan salt and poloxamer 407. Different chitosan salts were formed by reacting chitosan with acetic, citric, and lactic acid. Various proportions of poloxamer 407 were added to the aqueous solution of chitosan salt, and the residue obtained by lyophilisation was compressed into discs, using a 30 kN compression force. An experimental design (3(2)) was used to study the influence of the type of chitosan salt and of the relative amount of poloxamer on drug release capacity, swelling, erosion, and mucoadhesiveness of matrices. The results showed that matrix properties depended significantly on both relative amount of poloxamer and chitosan salt type. The rank orders of chitosan salts for the four processes evaluated were as follows: drug release: chitosan acetate>chitosan citrate>chitosan lactate; swelling: chitosan lactate>chitosan acetate=chitosan citrate; erosion: chitosan citrate>chitosan lactate>chitosan acetate; mucoadhesion: chitosan lactate>chitosan acetate=chitosan citrate. Mucoadhesion was particularly favoured when poloxamer 407 was present at about 30% (w/w). The matrix composed of chitosan lactate and poloxamer 407 showed the best characteristics for buccal administration.

Sustained release of water-soluble drug from directly compressed alginate tablets

The release of acetyl salicylic acid from directly compressed alginate tablets was investigated. The effect of the amount and type of alginate on the drug release rate was evaluated in different formulations. Four different grades of alginate were used. The in vitro release studies were carried out using the apparatus II (paddle) equipment as described in the USP 23/NF dissolution monograph. Dissolution medium was 0.1 M HCl for 2 h followed by phosphate buffer pH 6.8; both at 37 degrees C. Sustained drug release up to 16 h was achieved using sodium alginate in combination with dibasic calcium phosphate.

Chitosan-based gastrointestinal delivery systems

Chitosan, a natural polymer obtained by alkaline deacetylation of chitin, is non-toxic, biocompatible, and biodegradable. These properties make chitosan a good candidate for the development of conventional and novel gastrointestinal (GI) drug and gene delivery systems. The objective of this review is to summarize the recent applications of chitosan in oral and/or buccal delivery, stomach-specific drug delivery, intestinal delivery, and colon-specific drug delivery. The use of chitosan for targeting of drugs to each of these sites in the GI tract is illustrated by examples supported by in vivo studies. Chitosan appears to be a promising material for GI drug and gene delivery applications as many derivatives and formulations are being examined.

Alginate in drug delivery systems

Alginates are established among the most versatile biopolymers, used in a wide range of applications. The conventional use of alginate as an excipient in drug products generally depends on the thickening, gel-forming, and stabilizing properties. A need for prolonged and better control of drug administration has increased the demand for tailor-made polymers. Hydrocolloids like alginate can play a significant role in the design of a controlled-release product. At low pH hydration of alginic acid leads to the formation of a high-viscosity "acid gel." Alginate is also easily gelled in the presence of a divalent cation as the calcium ion. Dried sodium alginate beads reswell, creating a diffusion barrier decreasing the migration of small molecules (e.g., drugs). The ability of alginate to form two types of gel dependent on pH, i.e., an acid gel and an ionotropic gel, gives the polymer unique properties compared to neutral macromolecules. The molecule can be tailor-made for a number of applications. So far more than 200 different alginate grades and a number of alginate salts are manufactured. The potential use of the various qualities as pharmaceutical excipients has not been evaluated fully, but alginate is likely to make an important contribution in the development of polymeric delivery systems. This natural polymer is adopted by Ph.Eur. It can be obtained in an ultrapure form suitable for implants. This review discusses the present use and future possibilities of alginate as a tool in drug formulation.

Chitosan: some pharmaceutical and biological aspects--an update

Chitosan, a natural polysaccharide, is being widely used as a pharmaceutical excipient. It is obtained by the partial deacetylation of chitin, the second most abundant natural polymer. Chitosan comprises a series of polymers varying in their degree of deacetylation, molecular weight, viscosity, pKa etc. The presence of a number of amino groups permit chitosan to chemically react with anionic systems, thereby resulting in alteration of physicochemical characteristics of such combinations. Chitosan has found wide applicability in conventional pharmaceutical devices as a potential formulation excipient, some of which include binding, disintegrating and tablet coating properties. The polymer has also been investigated as a potential adjuvant for swellable controlled drug delivery systems. Use of chitosan in novel drug delivery as mucoadhesive, gene and peptide drug administration via the oral route as well as its absorption enhancing effects have been explored by a number of researchers. Chitosan exhibits myriad biological actions, namely hypocholesterolemic, antimicrobial and wound healing properties. Low toxicity coupled with wide applicability makes it a promising candidate not only for the purpose of drug delivery for a host of drug moieties (antiinflammatories, peptides etc.) but also as a biologically active agent. It is the endeavour of the present review to provide an insight into the biological and pharmaceutical profile of chitosan. Various investigations carried out recently are reported, although references to research performed on chitosan prior to the recent reviews have also been included, where appropriate.

Multiunit controlled-release diclofenac sodium capsules using complex of chitosan with sodium alginate or pectin

This study explored the application of chitosan-alginate (CA) and chitosan-pectin (CP) complex films as drug release regulator for the preparation of multiunit controlled-release diclofenac sodium capsules. Pellets containing drug and microcrystalline cellulose, in a ratio of 3:5, were prepared in a fluidized rotary granulator. The pellets were coated with CA, CP, sodium alginate, pectin, and chitosan solutions. The pellets, equivalent to 75 mg drug, were filled into capsules. After 2 h of dissolution test in acidic medium, the amount of the drug released from any preparation was negligible. The pellets were further subject to pH 6.8 phosphate buffer More than 80% drug release at 12 h was observed with the uncoated pellets and those coated with sodium alginate, pectin or chitosan. Both 1% CA and 3% CP coated pellets exhibited drug release profiles similar to that of Voltaren SR75. It was found that approximately 60% and 85% of the drug were released at 12 and 24 h, respectively. Both Differential thermal analysis (DTA) and Fourier transform infrared spectroscopy (FTIR) analyses revealed complex formation between chitosan and these anionic polymers. It could be concluded that CA and CP complex film could be easily applied to diclofenac sodium pellets to control the release of the drug.

Preparation of regular sized Ca-alginate microspheres using membrane emulsification method

Monodisperse Ca-alginate microspheres were prepared using the membrane emulsification method. Three ionic types of drugs (anionic, cationic and non-ionic) were incorporated into the microspheres, and the effects of sodium alginate concentration and the pressure applied during the dispersing process on the properties of the microspheres were examined. Monodisperse microspheres were obtained when the concentration of alginate solution was 2 wt% and the pressure applied was 0.4 x 10(5) Pa. The mean size of microspheres was approximately 4 microm. Lidocaine x HCl (cationic), sodium salicylate (anionic) and 4-acetamidophenol (non-ionic) were selected as ionic model drugs and included in the alginate microspheres. Lidocaine x HCl (cationic drug) release was more retarded than that of the anionic drug, because of the electrostatic attraction between the negative charge of the ionized carboxyl group in the alginate chain and the positive charge of the cationic drug. In acidic release medium, a slow release was observed due to the low swelling characteristic and the increased viscosity of alginate, regardless of ionic type of drug.

Characterization of chitosan hydrochloride-mucin interaction by means of viscosimetric and turbidimetric measurements

In the present work the interaction between chitosan hydrochloride (HCS) and two different types of mucin - one obtained from bovine submaxillary glands and the other from porcine stomach - was investigated. Two hydration media were tested: distilled water and 0. 1 M HCl. Intrinsic viscosity, which provides information about polymeric chain conformation, was assessed in both media for HCS and bovine submaxillary mucin. Changes in the specific viscosity of HCS-mucin mixtures were observed as a function of the polymer:mucin weight ratio. The formation of interaction products was indicated by a minimum in the specific viscosity. Such a minimum occurred at different polymer:mucin weight ratios depending on the hydration medium and mucin type. This suggested a different stoichiometry of interaction. Turbidimetric measurements were also effected in order to evidentiate the eventual precipitation of the polymer-mucin interaction products. While in distilled water the precipitation of the interaction product did occur, in acidic medium, although a minimum in specific viscosity was observed, no precipitate was formed. The two techniques employed, viscosimetric and turbidimetric, allowed us to investigate for both mucins the influence of hydration medium on the formation of the HCS-mucin interaction products and to conclude that a slightly acid-neutral pH favours the interaction between HCS and mucins.