Extraction and quantitation of paraquat and diquat from blood

HPLC-MS/MS determination and the postmortem distribution or postmortem redistribution of paraquat and its metabolites in four fatal intoxication cases

HPLC-MS/MS analysis and postmortem distribution or postmortem redistribution of paraquat and its two metabolites in poisoning death cases were reported. Paraquat, monoquat, and paraquat monopyridone were extracted from the sample with acetonitrile or methanol, respectively, detected by ZORBAX HILIC Plus (4.6 × 100 mm, 3.5 μm) chromatographic column, with 0.1 % formic acid aqueous solution - 0.1 % formic acid acetonitrile solution (v/v) as mobile phase. Paraquat, monoquat, and paraquat monopyridone had a good linear relationship within the range of 10-1000, 1-400, and 1-1000 ng/mL (or g), the correlation coefficient (r) were all ≥ 0.9996. Their detection limits were lower than 1 ng/mL (or g). The detection accuracy was 91.25∼113.44 %. The intra-day and inter-day precision were 1.51-3.99 % and 1.92-4.93 %, respectively. This method was used to detect and analyze four rare paraquat poisoning cases. The distribution of paraquat, monoquat, and paraquat monopyridone is uneven, which is relatively high in the heart, blood, lung, and kidney. Heart blood/Peripheral blood ratio of paraquat, monoquat, paraquat monopyridone concentration in two poisoned cases were 1.4, 2.0, 1.5 and 1.9, 1.3, 1.2, which showed a location dependent postmortem redistribution. This is the first time that HPLC-MS/MS and the postmortem distribution or postmortem redistribution of paraquat metabolites in poisoned death cases have been reported. This research provides scientific basis for forensic identification of paraquat poisoning cases and extraction of biological specimen.

Human and experimental toxicology of diquat poisoning: Toxicokinetics, mechanisms of toxicity, clinical features, and treatment

Diquat (1,1'-ethylene-2,2'-bipyridinium ion; DQ) is a nonselective quick-acting herbicide, which is used as contact and preharvest desiccant to control terrestrial and aquatic vegetation. Several cases of human poisoning were reported worldwide mainly due to intentional ingestion of the liquid formulations. Its toxic potential results from its ability to produce reactive oxygen and nitrogen species through redox cycling processes that can lead to oxidative stress and potentially cell death. Kidney is the main target organ due to DQ toxicokinetics and redox cycling. There is no antidote against DQ intoxications, and the efficacy of treatments currently applied is still unsatisfactory. The aim of this work was to review the most relevant human and experimental findings related to DQ, characterizing its chemistry, activity as herbicide, mechanisms of toxicity, consequences of poisoning, and potential therapeutic approaches taking into account previous experience in developing antidotes for paraquat, a more toxic bipyridinium herbicide.

Comparison study of the extraction methods of paraquat in post-mortem human blood samples

The most important step for Paraquat analysis in post-mortem human blood (PMB) is its extraction from the specimens, as Paraquat is insoluble in organic solvents due to its ionic form. The most common extraction method, solid phase extraction (SPE), has been used for the extraction of Paraquat from PMB. However, SPE procedures are somewhat time-consuming, and resulted in unsatisfactory recovery in our laboratory. Therefore, SPE procedures, with five extraction solvents for the liquid-liquid extraction (LLE) of paraquat in PMB, were compared using HPLC, and the chloroform-ethanol (7:3, v/v) solvent mixture was found to be the most effective. The recoveries of Paraquat using the 7:3 solvent mixture in human whole blood samples, which were already spiked with paraquat standards (1.05, 2.10 and 4.21 microg/mL) averaged 98.20, 105.71 and 99.40%, but the recoveries from the SPE were about 74.29, 78.50 and 80.10%, respectively. Linearity was obtained for the range of Paraquat standards, with a correlation coefficient; r2 > 0.999. The limit of detection (LOD, with S/N > or =3) and limit of quantitation (LOQ, with S/N > or =10) were 0.01 and 0.05 microg/mL, respectively. The extraction method was successfully applied to seven real post-mortem cases involving paraquat poisoning.

Spectra interference between diquat and paraquat by second derivative spectrophotometry

A rapid and accurate method, combining solid-phase extraction and second-order derivative spectrophotomety approaches, is developed for the simultaneous determination of diquat (DQ) and paraquat (PQ) in blood, tissue and urine samples. Supernatant resulting from the precipitation of protein (with trichloroacetic acid) in plasma and tissue or Amberlite IRA-401 resin treated urine are passed through a mini-column packed with Wakogel gel (Silica gel). Analytes are then eluted with a non-organic solvent, 0.2mol/l HCl solution containing 2mol/l NH(4)Cl. UV spectrum of the eluent in 220-350nm range provides effective screen to detect the presence of DQ and/or PQ. In the presence of DQ or PQ alone, the analyte present is quantitated by conventional zero- or second-order derivative spectrophotometry. The calibration curve in the 0.1-5.0mg/l range for either analyte obeys Beer's law. When both DQ and PQ are present, their concentrations are determined by the peak amplitudes of their respective second-derivative spectra after the addition of alkaline dithionite reagent. Interference is negligible when the DQ/PQ concentration ratio is within the 5.0-0.2 range. Using a 2-ml of sample size, the detection limits for DQ and PQ in plasma are 0.02 and 0.005mg/l. The corresponding detection limits for urine samples (10ml sample size) are 0.004 and 0.001mg/l. Recoveries of DQ and PQ in triplicate plasma and urine samples spiked with 0.5mg/l of analytes are 93 and 85%. The precision of the proposed method resulting from triplicate study of spiked urine samples varies from 3.2 to 4.6% at 0.5mg/l of DQ and PQ, respectively.