Determination of the enantiomer of a cholesterol-lowering drug by cyclodextrin-modified micellar electrokinetic chromatography

Chromatographic and electrophoretic characterization of protein variants

Almost all proteins are expressed in several variants, also known as isoforms. Individual protein variants differ by modifications of the individual amino acid side chains, or the N- or C-terminus. Typical modifications are glycosylation, phosphorylation, acetylation, methylation, deamidation or oxidation. It is of utmost interest to either get a quantitative picture of the variants of a particular protein or to separate the variants in order to be able to identify their molecular structure. Protein variants are present in native as well as in recombinant proteins. In the case of protein production it is interesting, how variants are generated during fermentation, purification processes, storage, and how present individual variants influence the biological activity. This review provides a comparison of chromatographic and electrophoretic separation methods to analyze and to prepare protein variants.

Enantiomeric separation of naphthalene-2,3-dicarboxaldehyde derivatized dl-3,4-dihydroxyphenylalanine and optical purity analysis of l-3,4-dihydroxyphenylalanine drug by cyclodextrin-modified micellar electrokinetic chromatography

A new cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method for the enantiomeric separation of 3,4-dihydroxyphenylalanine (DOPA), derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) to produce cyanobenzoisoindole (CBI) derivative, has been developed. The unsubstituted alpha-, beta-, gamma-cyclodextrins (CDs) and hydroxypropyl-substituted alpha-, beta-, gamma-CDs, as chiral selector, were examined for the enantiomeric separation of CBI-DL-DOPA. In addition to the concentration of chiral selector, some other experimental factors also have been optimized, such as concentration of borate buffer, content of sodium dodecyl sulphate (SDS), pH of electrolyte and applied voltage. Optimal separation was obtained at pH 8.0, 100 mM borate solution containing 5 mM HP-gamma-CD and 120 mM SDS, as well as 18 kV applied voltage and 25 degrees C capillary temperature. Detection was followed by direct UV absorptiometric measurements at 254 nm. The developed method was employed for optical purity analysis of levodopa drug and allowed the determination of 0.14% D-DOPA in L-3,4-dihydroxyphenylalanine (levodopa) with well peak identification.

Impact of organic solvents on the resolution of synthetic peptides by capillary electrophoresis

The effect of variations in the concentrations of different organic solvents, including acetonitrile, methanol, ethanol, propanol and isopropanol, with aqueous buffer electrolytes of defined composition and pH on the electroosmotic flow velocity, v(EOF), of uncoated fused silica capillaries and on the electrophoretic mobility, mu(e), of synthetic peptides in high-performance capillary electrophoresis (HPCE) has been systematically investigated. In these experiments, the volume fractions of the organic solvent in the aqueous buffer electrolyte were changed from psi = 0.0 to 0.80. The addition of these organic solvents to the aqueous buffer electrolyte reduced the electroosmotic flow (EOF) of the system, but to significantly different extents. For the protic solvents as the alkyl chain of the alcohol increased, at the same volume fraction the greater was the influence on the electroosmotic flow. However, for the aprotic solvent, acetonitrile, the EOF did not change substantially as the volume fraction was varied. The electrophoretic mobility of synthetic peptides under the different buffer electrolyte conditions showed similar trends, confirming that the content and type of the organic modifier can be rationally employed to subtly manipulate the separation selectivity of synthetic peptides. These results, therefore, provide fundamental insight into the experimental options that can be used to maximise resolution of synthetic peptides in HPCE with aqueous buffer-organic solvent mixtures as well as a basis to select optimal binary or ternary buffer electrolyte compositions for the analysis of peptides when hyphenated techniques, such as HPCE-electrospray ionisation mass spectrometry (ESI-MS), are contemplated for the analysis of peptide samples of low abundance as can often be experienced in proteomic investigations.

Capillary electrokinetic separation techniques for profiling of drugs and related products

Capillary electrokinetic separation techniques offer high efficiency and peak capacity, and can be very useful for the analysis of samples containing a large variety of (unknown) compounds. Such samples are frequently met in impurity profiling of drugs (detection of potential impurities in a pharmaceutical substance or product) and in general sample profiling (determination of differences or similarities between samples). In this paper, the potential, merits, and limitations of electrokinetic separation techniques for profiling purposes are evaluated using examples from literature. A distinction is made between impurity profiling, forensic profiling and profiling of natural products, and the application of capillary zone electrophoresis, micellar electrokinetic chromatography, and capillary electrochromatography in these fields is discussed. Attention is devoted to important aspects such as selectivity, resolution enhancement, applicability, detection, and compound confirmation and quantification. The specific properties of the various electrokinetic techniques are discussed and compared with more conventional techniques as liquid chromatography.

Separation of antithrombin III variants by micellar electrokinetic chromatography

The characterisation of proteins is still one of the most challenging analytical tasks in modern bioanalysis. Due to the complex structure of proteins, several analytical techniques are often required to get sufficient information. Antithrombin III (AT III), a high-molecular-mass plasma glycoprotein which is an important protease inhibitor and the main modulator of thrombin activity, circulates in plasma in two isoforms, the so-called AT III-alpha (90-95%) and -beta (5-10%). Micellar electrokinetic chromatography was used to analytically separate these AT III variants, which differ in their affinity to the polysaccharide heparin.

Recent progress in chiral separation principles in capillary electrophoresis

This review summarizes recent developments in the field of chiral separations by electromigration techniques including capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), isotachophoresis (ITP), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC). This overview focuses on the development of new chiral selectors and the introduction of new techniques rather than applications of already established selectors and methods. The mechanisms of the different chiral separation principles are discussed.

Enantiomeric separation of alanyl and leucyl dipeptides by capillary electrophoresis with cyclodextrins as chiral selectors

Eight neutral cyclodextrins were tested for the enantiomeric separation of alanyl and leucyl dipeptides by capillary electrophoresis at pH 3, and seven out of the eight cyclodextrins proved suitable for the separation of one or more of the dipeptide enantiomer pairs. The best results were obtained with heptakis(2,6-di-O-methyl)-beta-cyclodextrin. The dipeptides that were separated were mainly the aromatic and the more lipophilic aliphatic dipeptides. Mobility difference plots at pH 3.0 with malonic acid-triethanolamine as background electrolyte showed that the aromatic dipeptides had higher affinities for the cyclodextrin than the nonpolar, aliphatic dipeptides. The results suggested that, under the conditions applied, the C-terminal amino acid rather than the N-terminal one is involved in the chiral discrimination.

Determination of enantiomeric excess by capillary electrophoresis

Capillary electrophoresis (CE) is becoming an established method for the determination of chiral trace impurities. This paper provides an overview of the state of the art of CE for such determinations. Detection limits of 0.1% impurity is widely accepted as a minimum requirement for chiral trace impurity determinations. This can be relatively easily achieved with CE. However, determination of lower concentrations requires careful optimization of the separation system. Four factors that are of particular significance for trace enantiomeric determinations: resolution, limit of detection, linear range and type of detection, are discussed. Further, the advantages and disadvantages of derivatization in this context are treated as well as the separation approach, ie., direct chiral separation or separation after the formation of diastereomers. It is concluded that the limit of impurity detection can be about 0.05% when UV detection is employed. Using laser-induced fluorescence detection, a quantitative determination at the 0.005% level is often possible.

Enantiomeric separation of glycyl dipeptides by capillary electrophoresis with cyclodextrins as chiral selectors

Uncharged cyclodextrins were tested as chiral selectors for the enantiomeric separation of 13 glycyl dipeptides with capillary electrophoresis. Initial experiments were performed on 10 mmol/L of a cyclodextrin in 0.1 mol/L phosphoric acid -0.088 mol/L triethanolamine. Some of the resolved dipeptides were nonaromatic, which is noteworthy since, to our knowledge, no examples of the separation of small, nonaromatic molecules have been published. Mobility difference plots for Gly-DL-Leu and Gly-DL-Phe with heptakis(2,6-di-O-methyl)-beta-cyclodextrin showed relatively flat profiles in a large concentration range, which is an advantage for the development of robust quantitative analytical methods. The use of a background electrolyte (BGE) solution with pH 3.0 gave irreproducible results for two of the dipeptides, the acidic Gly-DL-Asp and Gly-DL-Glu; this pH is not advisable for the development of robust methods for these two peptides. The need for purer chiral selectors was demonstrated by comparing different batches of heptakis(2,6-di-Omethyl)-beta-cyclodextrin from the same supplier. A BGE consisting of malonic acid and triethanolamine was introduced to give better buffer capacity than the original BGE at pH 3.0.

Enantiomeric purity determination of propranolol by capillary electrophoresis using dual cyclodextrins and a polyacrylamide-coated capillary

The use of a chirally selective capillary electrophoresis method is reported for the enantioselective purity determination of propranolol drug substance. The method employed a combination of both charged and neutral cyclodextrin. An internally coated capillary was used to suppress electroosmotic flow and potential peak tailing. The method was capable of monitoring below 0.1% m/m of the undesired impurity. Acceptable validation data was also obtained for recovery, linearity, and for both short and long-term injection precision.

Some factors affecting enantiomeric impurity determination by capillary electrophoresis using ultraviolet and laser-induced fluorescence detection

The key factors influencing enantiomer trace determination were investigated; these include resolution capillary diameter, limit of detection, linear range and type of detection. Chiral reagents, (+)- and (-)-1-(9-fluorenyl)ethyl chloroformate (FLEC), were employed as probes to demonstrate the influence of the variables. In order to find the best resolution, separation variables were optimized in both capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) modes by the application of factorial design experiments. A highly efficient chiral separation of the (+/-)-FLEC, derivatized with nonchiral amino acids, was achieved when using gamma-cyclodextrin as the chiral selector. The benefits of using a small diameter capillary for direct determination of both (+) and (-)-FLEC impurity (0.05-0.1% area/area) were demonstrated using UV detection and applying a sample stacking condition. A frequency-doubled argon ion laser (244 nm) was used as light source for laser-induced fluorescence (LIF) detection. Excitation light was provided by means of an optical fiber directed into the Hewlett Packard 3D capillary cartridge. The signals from UV and LIF were monitored simultaneously. The application of LIF detection greatly improved sensitivity and linear range. Further, as a consequence of the increased sensitivity, sample loading could be decreased, which led to an improvement of separation efficiency. Direct determination of 0.005% impurity could be achieved within the linear range.

Cyclodextrin-mediated micellar electrokinetic chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the enantiomer separation of racemorphan in human urine

Micellar electrokinetic chromatography (MEKC) was successfully and conveniently applied to the chiral separation with the addition of cyclodextrins (CDs) as chiral selector to the running buffer. Chiral separation depended on the type of CD; in particular, beta-CD was effective for the chiral separation of racemorphan. We investigated the optimal conditions of type and concentration of CD as chiral selector for the routine enantiomeric separation of racemorphan with good reproducibility. The effects of other parameters such as buffer pH and detection wavelength were also investigated to obtain the optimum conditions for the enantiomeric separation of racemorphan. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used for confirmation of racemorphan. The optimal conditions for enantiomeric separation of the racemorphan were as follows: 50 mM borate buffer at pH 9.4 with 50 mM SDS, 10 mM beta-CD and 20% 1-propanol, 57 cm x 50 microns fused-silica capillary column, and UV detection at 192 nm. Based on the developed method, racemorphan in human urine was also separated and determined using solid-phase extraction and MEKC.

A chiral capillary electrophoresis method for ropivacaine hydrochloride in pharmaceutical formulations: validation and comparison with chiral liquid chromatography

A capillary electrophoresis method for the determination of the enantiomeric purity of the local anaesthetic ropivacaine hydrochloride in injection solutions has been validated. The method showed the required limit of quantitation of 0.1% enantiomeric impurity. Good performances were shown for specificity, linearity, system repeatability, intermediate precision and accuracy. Robustness was tested via a full factorial design at two levels and the method proved to be robust. Comparison of the capillary electrophoresis method with the liquid chromatographic method currently used for several years at our laboratory on real samples of ropivacaine injection solutions showed that the techniques do not give significantly different results.

Micellar electrokinetic chromatography stability indicating assay and content uniformity determination for a cholesterol-lowering drug product

This study describes a specific, linear, precise, accurate and sensitive method for the determination of a developmental cholesterol-lowering drug formulated in capsules. The method can also determine two known hydrolytic degradants of the drug. Samples are dissolved in acetonitrile-phosphate buffer pH 4.5, diluted with water and assayed by micellar electrokinetic chromatography (MEKC) in a buffer containing 0.1 M borate-0.025 M SDS at 30 degrees C with an applied voltage of 25 kV. Detection is by UV absorbance at 200 nm. The method was cross validated by comparison with a gradient elution HPLC method. The MEKC method gave at least equivalent precision, accuracy and sensitivity to HPLC but was superior in the resolution of the known impurities and gave a considerably shorter analysis time. The method has been accepted as part of a regulatory submission to the US Food and Drug Administration (FDA).

Cyclodextrins and enantiomeric separations of drugs by liquid chromatography and capillary electrophoresis: basic principles and new developments

Investigation of individual drug enantiomers is required in pharmacokinetic and pharmacodynamic studies of drugs with a chiral centre. Cyclodextrins (CDs) are extensively used in high-performance liquid chromatography as stationary phases bonded to a solid support or as mobile phase additives in HPLC and capillary electrophoresis (CE) for the separation of chiral compounds. We describe here the basis for the liquid chromatographic and capillary electrophoretic resolution of drug enantiomers and the factors affecting their enantiomeric separation. This review covers the use of CDs and some of their derivatives in studies of compounds of pharmacological interest.

Development and validation of chiral high-performance liquid chromatographic methods for the quantitation of valsartan and of the tosylate of valinebenzyl ester

A stereospecific HPLC method for the quantitation of CGP 49309 in samples of its corresponding enantiomer valsartan has been developed and validated. The enantiomeric separation was achieved on a 5 micron silica-bonded, alpha 1-acid glycoprotein column (Chiral AGP) with a phosphate buffer, pH 7, containing 2% (v/v) 2-propanol as a mobile phase. The linearity was established in the range 0.1-4% (r > 0.999). The limit of quantitation was 0.1% and the limit of detection was 0.04%. The accuracy of the method was found to be 96.7% (average). For the precision (repeatability), a relative standard deviation value of 2.4% was found. Similarly, a stereoselective HPLC method was also developed and validated for the quantitation of the enantiomer of the starting material used for the synthesis of valsartan, namely (R)-valinebenzyl ester tosylate. Baseline resolution of the enantiomers of valinebenzyl ester tosylate could be achieved on the chiral crown ether column Crownpak CR (Daicel) at 50 degrees C using water-methanol-trifluoroacetic acid (850:150:1, v/v) as a mobile phase. The linearity was established in the range 0.5-5% (r > 0.999). The accuracy of the method was found to be 100.5% (average). For the precision (repeatability), a relative standard deviation value of 3.4% was found. Both methods were found to be suitable for the analysis of the respective analytes.

Capillary electrophoresis of cardiovascular drugs

This review surveys the use of capillary electrophoresis for the analysis of cardiovascular drugs. Each section presents examples of separations according to the class of the cardiovascular agent. The classes presented are beta-adrenergic antagonists (beta-blockers), acetylcholinesterase inhibitors, angiotensin-converting enzyme inhibitors, dieuretics, alpha-adrenergic antagonists, calcium channel blockers, cardiac glycosides, hypolipidemics (HmG-CoA reductase inhibitors and fibric acid), vasodilators and sodium channel blockers. Examples of the separation modes discussed include capillary electrophoresis, micellar electrokinetic chromatography using many additives (e.g. sodium dodecyl sulfate, cyclodextrins, bile salts, proteins, oligosaccharides) and isotachophoresis.

Enantiomer separation of drugs by electrokinetic chromatography

This review surveys the enantiomer separation of drugs by electrokinetic chromatography (EKC). EKC is one option of capillary electrophoretic (CE) techniques, which permits the separation of electrically neutral drugs. In enantiomer separation by EKC, ionic pseudo-stationary phases such as chiral micelles and proteins, which can migrate with its electrophoretic mobility and can interact with the solutes, are employed as chiral selectors. Addition of electrically neutral chiral selectors such as cyclodextrins and precolumn conversion of solutes into diastereomers are also successful in EKC. A brief theory of separation and modes of EKC enantiomer separation are described with some typical applications.

Impurities in drug substances and drug products: new approaches to quantification and qualification

Regulatory requirements for the identification, qualification and control of impurities in drug substances and their formulated products are now being increasingly explicitly defined, particularly through the International Conference on Harmonisation. The implications of the recent guidelines are reviewed, both from their regulatory impact and the impact upon analytical technology. Impurities also have important safety consequences, and suggestions for possible routes to the qualification of impurities which do not involve the need to undertake additional studies are made.