Automated on-line dialysis for sample preparation for gas chromatography: determination of benzodiazepines in human plasma

Development of a validated HPLC method for the determination of four 1,4-benzodiazepines in human biological fluids

A simple and sensitive HPLC method was developed and validated for the determination of four frequently prescribed 1,4-benzodiazepines: alprazolam (ALP), bromazepam (BRZ), diazepam (DZP), and flunitrazepam (FNZ). Separation was achieved on an Inertsil C8 analytical (250 mm x 4 mm, 5 microm) column, after selective extraction of benzodiazepine drugs from biological matrices by means of SPE. Isocratic elution was performed with a mobile phase consisting of CH3COONH4, 0.05 M CH3OH, and CH3CN (33:57:10 by volume). Quantification was performed at 240 nm with mefenamic acid (6 ng/microL) as the internal standard. DSC-18 Supelco cartridges provided high absolute recoveries (81-115%). The developed method was fully validated in terms of selectivity, linearity, accuracy, precision, stability, and sensitivity. Repeatability (n = 8) and between-day precision (n = 8) revealed RSD <12%. Recoveries from biological samples ranged from 81.2 to 115%. The detection limit of the method was calculated as 3.3-10.2 ng in blood plasma and 2.6-12.6 ng in urine for 20 microL injection volume. The method was applied to spiked biological matrices. Moreover, the method was applied to real samples of urine after an oral administration.

Analysis of certain tranquilizers in biological fluids

A review with 282 references is presented that deals with the reported methods of analysis of phenothiazines, thioxanthenes, and benzodiazepine derivatives of pharmaceutical interest. The review includes the methods adapted in biological fluids.

On-line dialysis and quantitative high-performance liquid chromatography analysis of iodixanol in human, rat and monkey plasma

A fully automated HPLC method for analysing the non-ionic X-ray contrast agent iodixanol in plasma samples, using on-line dialysis for sample preparation, was developed. Optimal conditions were obtained with a static dialysis donor solution of 110 microl and 4 ml of recipient solution (dialysate) pulsed onto a trace enrichment column, giving maximum 55% dialysis efficiency in less than the chromatographic run time of 20 min. Hence, one sample could be dialysed during the analysis of the previous. The maximum load of iodixanol on the trace enrichment column was 3.75 mg. Validation showed that the method was selective for iodixanol, sensitive down to 84 pmol/ml and had a high precision over a linear range up to 320 nmol/ml. Although developed for iodixanol, the method can easily be modified and applied to other substances with similar properties, i.e., substances having low protein binding and high water solubility, but strong enough stationary phase affinity to be retained by an appropriate trace enrichment column.

Automating solid-phase extraction: current aspects and future prospects

This paper reviews current trends and techniques in automated solid-phase extraction. The area has shown a dramatic growth the number of manuscripts published over the last 10 years, including applications in environmental science, food science, clinical chemistry, pharmaceutical bioanalysis, forensics, analytical biochemistry and organic synthesis. This dramatic increase of more that 100% per year can be attributed to the commercial availability of higher throughput 96-well workstations and extraction plates that allow numerous samples to be processed simultaneously. These so-called parallel-processing workstations represent the highest throughput systems currently available. The advantages and limitations of other types of systems, including discrete column systems and on-line solid-phase extraction are also discussed. Discussions of how automated solid-phase extractions can be developed, generic approaches to automated solid-phase extraction, and three noteworthy examples of automated extractions are given. The last part of the review suggests possible near- and long-term directions of automated solid-phase extraction.

Membrane-based sample preparation coupled on-line to chromatography or electrophoresis

A review on the use of membranes for on-line sample preparation prior to chromatographic and electrophoretic analysis is provided. The current state-of-the-art of four membrane-based techniques (dialysis, electrodialysis, filtration and membrane extraction) is described by reviewing their principles and applications. Possible future developments are discussed.

On-line combination of aqueous-sample preparation and capillary gas chromatography

An overview is presented of methods currently in use to combine the preparation of aqueous samples on-line with capillary gas chromatography. Two approaches can be distinguished: heartcut-orientated reversed-phase liquid chromatography-gas chromatography (GC) and analyte-isolation-orientated analyte extraction-GC. These approaches either use techniques in which water is directly introduced onto the GC column, or an indirect approach in which water is eliminated, i.e., by solid-phase extraction, solid-phase microextraction or liquid-liquid extraction, prior to introduction of the analytes onto the GC column. The latter type of approach is much more successful and user friendly, and many applications have been reported.

Methods for the measurement of benzodiazepines in biological samples

A review of methods for the measurement of benzodiazepines in biological specimens published over the last five years is presented. A range of immunoassay procedures using EIA, ELISA, FPIA, agglutination or kinetic interaction of microparticles, or RIA methods are now available. Cross reactivities to benzodiazepines are variable such that no one kit will recognise all benzodiazepines and their relevant metabolites at concentrations likely to be encountered during therapeutic use. Prior hydrolysis of urine to convert glucuronide metabolites to immunoreactive substances improves detection limits for many benzodiazepines. Several radioreceptor assays have now been published and show good sensitivity and specificity to benzodiazepines and offer the advantage (over immunoassay) of being able to detect these drugs with equal sensitivity. Solvent extraction techniques using a variety of solvents were still popular and offer acceptable recoveries and lack of significant interference from other substances. A number of papers describing solid phase extraction procedures were also published. Direct injection of specimens into a HPLC column with back flushing were also successfully described. Seventy two chromatographic methods using HPLC, LC-MS, GC and GC-MS methods were reviewed. HPLC was able to achieve detection limits for many benzodiazepines using UV or DAD detection down to 1-2 ng/ml using 1-2 ml of urine or serum (blood). ECD detectors gave detection limits better than 1 ng/ml from 1 ml of specimen, which was an order of magnitude lower than for NPD. EI-MS offered similar sensitivity, whilst NCI-MS was capable of detection down to 0.1 ng/ml. Methods suitable for the separation of enantiomers of benzodiazepines have been described using HPLC. Electrokinetic micellar chromatography has also been shown to be capable of the analysis of benzodiazepines in urine.