Cementless hemispheric acetabular components. 2-4-year results

Does hip resurfacing require larger acetabular cups than conventional THA?

Hip resurfacing is femoral bone preserving, but there is controversy regarding the amount of bone removed at the acetabular side. We therefore compared the implanted acetabular cup sizes in primary THAs between two resurfacing devices and a conventional press-fit cup using a series of 2134 THAs (Allofit cup 1643 hips, Durom Hip Resurfacing 249 hips, and Birmingham Hip Resurfacing 242 hips). The effects of patient demographics and cup position in the horizontal plane also were assessed. After controlling for gender, patients were matched for height, weight, body mass index, and age. The mean size for Allofit cups was smaller than the sizes for Durom and Birmingham Hip Resurfacing cups in women (49.9 mm, 51.6 mm, 52.3 mm, respectively) and men (55.1 mm, 56.7 mm, 57.8 mm; respectively). Although patient height was associated with the implanted cup size, the cup position in the horizontal plane had no effect on the size used. Larger cups were used with hip resurfacing than for THA with a conventional press-fit cup. However, additional studies are needed to determine whether these small differences have any clinical implications in the long term. The association of cup size and patient height should be considered in future studies comparing component sizes among different implants.

LEVEL OF EVIDENCE

Level III, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Radiological evaluation of the metal-bone interface of a porous tantalum monoblock acetabular component

Between January 1998 and December 1998, 82 consecutive patients (86 hips) underwent total hip arthroplasty using a trabecular metal monoblock acetabular component. All patients had a clinical and radiological follow-up evaluation at six, 12 and 24 weeks, 12 months, and then annually thereafter. On the initial post-operative radiograph 25 hips had a gap between the outer surface of the component and the acetabular host bed which ranged from 1 to 5 mm. All patients were followed up clinically and radiologically for a mean of 7.3 years (7 to 7.5). The 25 hips with the 1 to 5 mm gaps were studied for component migration at two years using the Einzel-Bild-Roentgen-Analyse (EBRA) digital measurement method. At 24 weeks all the post-operative gaps were filled with bone and no acetabular component had migrated. The radiographic outcome of all 86 components showed no radiolucent lines and no evidence of lysis. No acetabular implant was revised. There were no dislocations or other complications. The bridging of the interface gaps (up to 5 mm) by the trabecular metal monoblock acetabular component indicates the strong osteoconductive, and possibly osteoinductive, properties of trabecular metal.

Radiographic evaluation of a monoblock acetabular component: a multicenter study with 2- to 5-year results

Serial radiographs of a porous tantalum monoblock acetabular cup design were evaluated for cup stability and signs of successful osteointegration. Of 574 primary consecutive total hip replacements in 542 patients performed by 9 surgeons at 7 hospitals, 414 cases were available for minimum 2-year follow-up. Follow-up averaged 33 months and ranged from 24 to 58 months. Postoperative radiographs revealed acetabular gaps in 100 zones in 80 (19%) hips: 29 in zone I, 67 in zone II, and 4 in zone III. At last follow-up, 84 (84%) of the zones with gaps completely filled in, and all 4- and 5-mm gaps filled in. There was no progression of any postoperative gap, no evidence of continuous periacetabular interface radiolucencies, no evidence of lysis, and no revisions for loosening. Although these short-term results are encouraging, further follow-up will be required to assess whether the monoblock design and the low modulus of elasticity of porous tantalum will reduce the incidence of periacetabular stress shielding and occurrence of osteolysis.

Late loosening of press-fit cementless acetabular components

Between January 1987 and September 1990, 67 consecutive cementless total hip arthroplasties were implanted in 59 patients by one surgeon. The mean age of the patients at surgery was 57 years (range, 23-80 years). All acetabular components were plasma-sprayed titanium hemispheric cups with four peripheral rim fins, but additional screw fixation was not used. The mean followup was 10.4 years (range, 8.8-12.5 years). With revision as the endpoint, the failure rate of this acetabular component at a mean of 10.4 years was 28% (19/67). Of the 56 patients (56 hips) with radiographic followup, loosening of the acetabular shell occurred in 10 hips in 10 patients (18%). Seventy percent of these loosened cups failed by tilt which occurred in a rapid manner; all of the patients required revision surgery. We examined the manner of loosening of a press-fit acetabular component after early (5-year) results showed high hip scores and a low failure rate.

Dislodgment of polyethylene liners in first and second-generation Harris-Galante acetabular components. A report of eighteen cases

BACKGROUND

Dislodgment of the polyethylene liner is an increasingly common complication following total hip arthroplasty. The purposes of this study are to present the results in a series of patients with this complication and to analyze the mode of failure.

METHODS

Between November 1995 and January 2001, eighteen patients who had had a total hip arthroplasty presented with dislodgment of the polyethylene liner from a Harris-Galante metal acetabular shell. The medical records, radiographs, operative notes, and retrieved components were reviewed. In addition, scanning electron microscopy was used to study the fractured surfaces in a shell that had four broken tines.

RESULTS

The components had been in situ for an average of seven years (range, three to eleven years). Seventeen components were second generation, and one was first generation. Symptoms developed spontaneously in sixteen patients, during sexual intercourse in one, and following a fall on the hip in one. Radiographs showed eccentric positioning of the head in all of the hips and broken tines in six. All of the shells were well fixed. Treatment consisted of revision of the shell in four patients, exchange of the liner in four, cementation of a new liner into the shell in seven, and cementation of an all-polyethylene cup in three. The liners had severe damage of the rim. Scanning-electron microscopy of the fractured surfaces of four tines revealed a fatigue pattern.

CONCLUSIONS

We believe that, as the liner wears and becomes loose because of an inadequate locking mechanism, progressive micromotion occurs and the load increases on the polyethylene rim until it deforms and/or fractures. Subsequently, nothing prevents the liner from rotating out of the shell. As this mechanism of failure appears to include fatigue failure of the locking tines and wear of the liner, this complication is likely to increase as the components age in situ.

Long-term survivorship of cemented all-polyethylene acetabular components in patients > 75 years of age

Between 1974 and 1982, 132 consecutive hips in 112 patients >75 years of age were treated with primary total hip arthroplasty for osteoarthritis using a cemented all-polyethylene T28 socket and cemented T28 or TR28 stem with a 28-mm head size. At the time of review, 94 patients (110 hips [83%]) had died and 18 patients (22 hips [17%]) were still living (mean age at follow-up, 93 years). Five hips (5 patients) were lost to follow-up. Clinical follow-up averaged 8.9 years for the entire group and 14.6 years for patients still living. Only 2 acetabular components have been revised (1 for recurrent dislocation, 1 for infection). No acetabular component has required revision for aseptic loosening. Survivorship free of acetabular revision for aseptic loosening at 10 years was 100%; free of symptomatic acetabular loosening, 97.4% (95% confidence interval, 91.8-100%); and free of acetabular loosening, 95.9% (95% confidence interval, 89.7-100%). The commonest complication was postoperative hip dislocation, which occurred in 11 hips (8.7%) and which required reoperation in 2 hips. Cemented acetabular components implanted in patients >75 years of age with a diagnosis of osteoarthritis showed a high rate of survivorship free of revision and free of symptomatic aseptic loosening.

Porous cups with and without hydroxylapatite-tricalcium phosphate coating: 23 matched pairs evaluated with radiostereometry

Migration, wear, and presence of radiolucencies were studied in 23 matched pairs of patients operated with porous-coated acetabular cups with additional screw fixation. All implants had the same type of titanium fiber mesh. In each pair, one of the cups was plasma-sprayed with a coating consisting of 70% hydroxylapatite (HA) and 30% tricalcium phosphate (TCP). Radiostereometric analysis up to 2 years after the operation revealed smaller rotations around the horizontal axis in cups with HA/TCP coating. The migration of the cup center was not significantly influenced. Evaluation of femoral head penetration in 12 of the matched pairs did not reveal any significant difference. Immediately after operation, implants with HA/TCP coating had more central radiolucencies, which, despite minimal migration, disappeared during the follow-up. The clinical results did not differ between the 2 groups. The findings of less tilting and diminishing radiolucencies in the cups with HA/TCP coating suggest a more complete ingrowth of bone and a better sealing of the interface.

Unusual cause of third-body wear in total hip arthroplasty

A case of severe osteolysis caused by third-body wear using a Harris-Galante II cup (Zimmer, Warsaw, IN) is reported. The prosthesis was inserted in a 23-year-old man 4.5 years ago. At revision, 3 triangular tynes of the acetabular shell rim were found embedded in the polyethylene liner.

Three-dimensional polyethylene wear of a press-fit titanium prosthesis. Factors influencing generation of polyethylene debris

Between 1985 and 1990, 108 consecutive Harris-Galante I (Zimmer, Warsaw, IN) total hip arthroplasties were performed by four surgeons at a single hospital. At the time of follow-up evaluation, 80 hips were available for review. The mean rate of linear wear was 0.15 mm/y, mean rate of three-dimensional femoral head displacement was 0.21 mm/y, and mean rate of volumetric wear was 121 mm3/y. Eight hips (10%) in this series had radiologic osteolysis around either the femoral or acetabular component. A significantly greater volumetric wear rate was found in patients who were younger, those with a higher activity level, those who received a 32-mm-diameter femoral head, and those with vertical orientation of their acetabular component. No relationship could be made with patient weight, gender, Harris hip score, or cup diameter.

Migration of press-fit cups fixed with poly-L-lactic acid or titanium screws: a randomized study using radiostereometry

The early migration of porous acetabular cups was studied in 43 patients with osteoarthrosis. The patients were randomly allocated to additional fixation of the cup with either biodegradable poly-L-lactic acid screws or titanium screws. Radiostereometric evaluation was done during the first 2 years after the procedure in 43 hips (23 with poly-L-lactic acid screws and 20 with titanium screws). At the 2-year follow-up, cups fixed with poly-L-lactic acid screws had migrated significantly more in the proximal-distal (p < 0.05) and medial-lateral (p < 0.05) directions. Cups with titanium screws displayed more pronounced rotations around the longitudinal axis (p < 0.05). Postoperatively, on the lateral view, there was an increased occurrence of radiolucencies at the dome of the cups fixed with poly-L-lactic acid screws (p < 0.05). The clinical result did not differ between the two groups. Inferior implant-bone contact in the poly-L-lactic acid group, local changes of the bone quality, and diminishing support of the poly-L-lactic acid screws caused by their degradation with time could be reasons for the different pattern of migration observed.

Cementless hemispheric acetabular components. A 4- to 8-year follow-up report

A retrospective radiographic analysis was performed on 71 cementless acetabular components followed from 4 to 8 years after surgery. A Harris-Galante (Zimmer, Warsaw, IN) cup was used in 46 cases and an Optifix (Smith & Nephew Richards, Memphis, TN) cup was used in 25 cases. There were 66 primary and 5 revision cases. Nonprogressive radiolucencies were common in both types of cups (64% of Optifix, 70% of Harris-Galante). Radiolucencies were almost exclusively less than or equal to 1 mm in width and were most common in zones 1 and 3. Ten cups had continuous but nonprogressive radiolucencies, none greater than 1 mm in all three zones. No radiolucent lines wider than 2 mm were seen in any case. Four cups had progressive radiolucency that stabilized. Radiolucency around fixation screws was seen in one case, and demonstrated stable ingrowth at revision surgery. No cases of osteolysis, screw breakage, migration, or loss of fixation surface occurred. A single case of a broken locking mechanism of a Harris-Galante cup 2 years after liner exchange is reported.