A new gel using super absorbent polymer for mapping the spatial dose distributions of electron beams by MR imager

Clinical application of the Fricke-glucomannan gel dosimeter for high-dose-rate (192)Ir brachytherapy

This study investigates the efficacy of a new Fricke dosimeter formulation consisting of a standard Fricke gel dosimeter gelled with glucomannan (FrGDG). FrGDG was irradiated using a (192)Ir gamma-ray source with a remote afterloading system based on computed tomography images. (60)Co irradiation was performed for measuring the absorption of FrGDG and water. The distribution maps of T2 values from the irradiated containers were obtained by MR imaging and converted to the absorbed dose to visualize the dose distribution. We found that FrGDG was produced easily and quickly at room temperature. R2 (1/T2) values were reproducible and linearly correlated with the absorbed doses in the range from 0 to 30 Gy for irradiation with (192)Ir (the correlation coefficient was 0.99). The mean deviation between the doses obtained from the MR images of the FrGDG and those calculated by the treatment planning system for doses of 37.5, 40, 50, 62.5 and 75 Gy was 4.9%, 4.8%, 3.5%, 2.3% and 2.4%, respectively. In conclusion, MR imaging of FrGDG can visualize the dose distribution successfully, and thus serves as a useful quality assurance tool for complicated three-dimensional radiotherapy treatments.

A spin-spin relaxation rate investigation of the gelatin ferrous sulphate NMR dosimeter

Spin-spin NMR relaxation rate in the ferrous sulphate gelatin dosimeter has been studied in terms of pH, gelatin concentration, the addition of benzoic acid, and sample size. It is demonstrated that R2 is more sensitive to changes in Fe3+ ion concentration than R1 when measuring at frequencies of 64 and 100 MHz. pH has an important effect on dose response curves, and oxygen depletion occurs significantly more rapidly in FeSO4 gelatin than in the liquid FeSO4, resulting in a saturation dose of approximately 80 Gy at depths greater than approximately 3 mm in phantom. The concentration of gelatin can be increased to 12% by weight, and the dosimeter will continue to exhibit a linear dose response. Sensitivity is maintained at higher gel concentrations by pH compensation. Addition of low-concentration benzoic acid to the system does not alter the dose response of the gelatin FeSO4 system. Finally, spontaneous oxidation of Fe2+ ions does not significantly alter the shape of dose response curves but does result in increases in R2 by up to 4% per day.

The role of dose distribution gradient in the observed ferric ion diffusion time scale in MRI-Fricke-infused gel dosimetry

Ferric ion diffusion is a detrimental factor in MRI-Fricke-infused gel dosimetry. In this study, a novel approach involving MR image subtraction and a fast image-based dosimetry technique to study ferric ion diffusion effects is presented. The fast image-based approach allows studying dose profile degradation within minutes post-irradiation. The relationship between the rate of dose profile deterioration and dose distribution gradients can be elucidated with the improved imaging temporal resolution also. Our results showed that for a dose distribution with gradient 4 Gy/mm or higher, ferric ion diffusion causes apparent dose profile degradation in 0.5-1 h post-irradiation. For a gradual dose gradient change of 2.1 Gy/mm or smaller, dose profile degradation appears insignificant for a two-hour elapsed diffusion time. These observations agree well with the theoretical analysis of a square dependence between dose profile degradation and dose distribution gradient. Because all stereotactic radiosurgery procedures produce steep dose distributions and because the ideal "snapshot" of MR scanning cannot be achieved, knowledge of the ferric ion diffusion time scale is important in experimental designs in order to avoid potential measurement errors in MRI-Fricke-agarose gel dosimetry.