Furosine in consumption milk and milk powders

The Impact of Thermal Treatment Intensity on Proteins, Fatty Acids, Macro/Micro-Nutrients, Flavor, and Heating Markers of Milk-A Comprehensive Review

Milk thermal treatment, such as pasteurization, high-temperature short-time processing, and the emerging ultra-short-time processing (<0.5 s), are crucial for ensuring milk safety and extending its shelf life. Milk is a nutritive food matrix with various macro/micro-nutrients and other constituents that are possibly affected by thermal treatment for reasons associated with processing strength. Therefore, understanding the relationship between heating strength and milk quality is vital for the dairy industry. This review summarizes the impact of thermal treatment strength on milk's nutritional and sensory properties, the synthesizing of the structural integrity and bioavailability of milk proteins, the profile and stability of fatty acids, the retention of macro/micro-nutrients, as well as the overall flavor profile. Additionally, it examines the formation of heat-induced markers, such as Maillard reaction products, lactulose, furosine, and alkaline phosphatase activity, which serve as indicators of heating intensity. Flavor and heating markers are commonly used to assess the quality of pasteurized milk. By examining former studies, we conclude that ultra-short-time-processing-treated milk is comparable to pasteurized milk in terms of specific parameters (such as whey protein behavior, furosine, and ALP contents). This review aims to better summarize how thermal treatments influence the milk matrix, guiding the dairy industry's development and balancing milk products' safety and nutritional value.

Quality indicators in lactose hydrolyzed milks and soy beverages from Colombia

Worldwide there is great interest in producing low lactose milk and drinks, such as soy beverages, suitable for consumption by lactose-intolerant people. These products have different carbohydrate compositions, which affect quality indicators derived from Maillard reaction (furosine and 5-hydroxyl-methyl furfural, HMF). In this study, quality parameters have been determined in 11 commercial samples (8 lactose-hydrolyzed milks and 3 soy beverages). Presence of β-galactooligosaccharides in milks (22.2-458.1 mg/100 mL) correlating roughly with the remaining lactose content (1.9-357.7 mg/100 mL). Soy beverages contained α-galactosides in concentrations of 30-75 mg/100 mL. HMF and furosine were detected in all milk samples. In addition, powdered milks subjected to controlled storage (40 °C, a_w 0.44) showed a furosine increase up to 88%. In conclusion, a great composition diversity was observed in the different products, probably favored by the lack of regulation and underline the importance of controlling processing and storage conditions to preserve product quality.

Maillard reaction harmful products in dairy products: Formation, occurrence, analysis, and mitigation strategies

Various harmful Maillard reaction products such as lactulosyl-lysine (furosine), furfurals, and advanced glycation end products (AGEs) could be formed during the thermal processing of dairy products, which could lead to various chronic diseases. In this review, the furosine, furfurals, and AGEs formation, occurrence, analysis methods, and toxicological and health aspects in various dairy products were summarized to better monitor and control the levels of harmful Maillard reaction products in processed dairy products. It was observed that all types of dairy products, including raw milk, contain harmful Maillard reaction products, with the highest in whey cheese and condensed milk. High-performance liquid chromatography (HPLC) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) is the common method for the determination of furosine and furfurals and AGEs in dairy products, respectively. However, the simple, rapid, environment-friendly, and accurate methods of determination are still to be developed. Incorporating resveratrol, pectin oligosaccharides (POS) in milk are effective methods to inhibit AGEs formation. This review provides a guide not only for consumers regarding the selection and consumption of dairy products, but also for monitoring and controlling the quality of dairy products.

Characterizing changes in Maillard reaction indicators in whole milk powder and reconstituted low-temperature pasteurized milk under different preheating conditions

The chemical properties and quality of milk powder and reconstituted milk can be changed by preheating treatment during milk powder processing. The effect of preheating conditions (low-temperature pasteurization [LT], high-temperature pasteurization [HT], extended shelf-life [ESL], ultra-high-temperature [UHT], and in-container sterilization [CS]), on furosine, furfural compounds, and advanced glycation end products were investigated in milk powders and reconstituted milk. The results revealed that Maillard reaction indicators were affected by preheating intensity; contents of furosine, 5-hydroxymethylfurfural (HMF), 2-furfural, Nε-(carboxymethyl)lysine (CML), and Nε-(carboxyethyl)lysine (CEL) increased, whereas lysine and 5-methyl-furfural (MF) decreased in both milk powder and reconstituted milk with an increase in the intensity of preheating. CML and CEL contents in reconstituted milk increased by 1.7- to 2.4-fold and 1.3- to 1.6-fold, respectibely. The content of CML and CEL in high-preheating powders was 11%-34% and 18%-123% higher than that in LT samples, respectively. Compared with milk powder, furosine was reduced by 22%-55% and MF by 57%-69% in reconstituted milk; HMF increased by 12%-52%, CML and CEL increased 1.7-2.4 times and 1.3-1.6 times, respectively. A superposition effect was observed between preheating intensity and heat process times, which increased the content of Maillard reaction products. PRACTICAL APPLICATION: Our findings revealed the promotion effect of higher preheating conditions on Maillard reaction indicators in milk powder and reconstituted low-temperature pasteurized milk. The results will help reduce some of the harmful Maillard reaction indicators (e.g., advanced glycation end products) formed during heat processing and assist customers in selecting dairy products with low amounts of Maillard reaction products.

Profiles of initial, intermediate, and advanced stages of harmful Maillard reaction products in whole-milk powders pre-treated with different heat loads during 18 months of storage

This study evaluated the chemical changes in five types of whole-milk powders (WMP) with different heating loads during storage. The WMP was preheated using low-heat [low-temperature long-time (LTLT), high-temperature short-time pasteurization (HTST)] and high-heat process [ultra-pasteurization (ESL), ultra-high-temperature (UHT) treatments, and in-bottle sterilization (BS)]. Furosine increased by 2.5-3.0 times in high-heat WMP and 5.7-8.4 times in low-heat WMP during storage. 5-(hydroxymethyl)furfural (HMF) content in high-heat WMP was on average 1.4- to 2.4-fold higher than in low-heat WMP during storage. The increases in the amount of Nε-(carboxymethyl)lysine (CML) and Nε-(carboxyethyl)lysine (CEL) in high-heat WMP were more than that in low-heat WMP (CML, 3.4-4.9 vs 3.1-3.4 times; CEL, 3.4-4.2 vs 2.7-3.0 times). Pyrraline in high-heat WMP increased by 1.8- to 2.1-fold. 2-Furaldehyde, CML, and CEL increased slowly with 12 months of storage and then accelerated. Storage time significantly contributed to more furosine, HMF, CML, and CEL contents in high-heat WMP.

The combined use of 1 H and 2D NMR-based metabolomics and chemometrics for non-targeted screening of biomarkers and identification of reconstituted milk

BACKGROUND

The illegal undeclared addition of reconstituted milk powder to ultra-heat treated (UHT) milk to lower production costs is an example of economically motivated adulteration. This activity not only defrauds consumers but also places honest traders at a disadvantage, which could damage the reputation of milk producers and reduce the integrity of the markets. In this research, a non-targeted analytical strategy that combines proton (¹ H) nuclear magnetic resonance (NMR) spectroscopy with a chemometrics data mining tool was developed for the authentication of bovine UHT milk.

RESULTS

Unsupervised principal component analysis was used to distinguish UHT and tap-water-reconstituted powdered milk. Partial least squares-discriminant analysis (PLS-DA) with R² (Y) and Q² equal to 0.859 and 0.748, respectively, was used to differentiate UHT and reconstituted milk samples. Three compounds were selected as biomarkers to distinguish UHT and reconstituted milk and identified according to the standard NMR-spectra database. Finally, a PLS-DA model was established, according to the characteristic spectral bands, to identify UHT milk and reconstituted milk.

CONCLUSION

This procedure demonstrated the feasibility of using non-targeted NMR profiling combined with chemometric analysis to combat mislabeling and fraudulent practices in milk production. © 2019 Society of Chemical Industry.

Quantification of Furosine (Nε-(2-Furoylmethyl)-l-lysine) in Different Parts of Velvet Antler with Various Processing Methods and Factors Affecting Its Formation

Furosine (Nε-(2-furoylmethyl)-l-lysine) is formed during the early stages of the Maillard reaction from a lysine Amadori compound and is frequently used as a marker of reaction progress. Furosine is toxic, with significant effects on animal livers, kidneys, and other organs. However, reports on the formation of furosine in processed velvet antler are scarce. In this study, we have quantified the furosine content in processed velvet antler by using UPLC-MS/MS. The furosine contents of velvet antler after freeze-drying, boiling, and processing without and with blood were 148.51–193.93, 168.10–241.22, 60.29–80.33, and 115.18–138.99 mg/kg protein, respectively. The factors affecting furosine formation in processed velvet antler, including reducing sugars, proteins, amino acids, and process temperature, are discussed herein. Proteins, amino acids, and reducing sugars are substrates for the Maillard reaction and most significantly influence the furosine content in the processed velvet antler. High temperatures induce the production of furosine in boiled velvet antler but not in the freeze-dried samples, whereas more furosine is produced in velvet antler processed with blood, which is rich in proteins, amino acids, and reducing sugars, than in the samples processed without blood. Finally, wax slices rich in proteins, amino acids, and reducing sugars produced more furosine than the other parts of the velvet antler. These data provide a reference for guiding the production of low-furosine velvet antler and can be used to estimate the consumer intake of furosine from processed velvet antler.

Authenticating Raw from Reconstituted Milk Using Fourier Transform Infrared Spectroscopy and Chemometrics

Fourier transform infrared (FTIR) spectroscopy combined with chemometrics was used to authenticate raw milk from their reconstituted counterparts. First, the explanatory principal component analysis (PCA) was employed to visualize the relationship between raw and reconstituted milk samples. However, the degree of separation between two sample classes was not significant according to direct observation of the scores plot, indicating FTIR spectra may contain complicated chemical information. Second, partial least-squares-discriminant analysis (PLS-DA) that incorporate additional class membership information as modelling input was further calculated. The PLS-DA scores yielded clear separation between two classes of samples. Additionally, possible components from the model loading were studied, and the PLS-DA model was validated internally under the model population analysis framework, as well as externally using an independent test set. This study gave insights into the authentication of milk using FTIR spectroscopy with chemometrics techniques.

Two alternative chromatography methods assisted by the sulfonic acid moeity for the determination of furosine in milk

N6-(2-(2-Furanyl-2-oxoethyl))-l-lysine (furosine) is a deteriorative reaction product that is produced during heat treatment and storage of milk. This compound affects the quality of commercial dairy products. Accurate determination of furosine is necessary as it may serve as a measure of the degree of protein degradation in dairy products. In this article, two HPLC based methods (1. a novel ion-pairing reagent 2. a strong cation exchange column) are proposed to quantify furosine. These methods were optimized and validated for their application to analyze fluid milk and dried milk powder. •Two methods that can be used for routine milk quality control, including heat damage and adulteration, were developed.•Compared to previous methods, the modified procedures herein using aromatic sulfonic acids (a pairing agent or covalently bound to a matrix on a strong cation exchange column) provide less expensive and more sensitive determinations.•The identification and quantification of the furosine chromatographic signal was successfully achieved during analysis of commercial and spiked samples.

Qualitative and quantitative analysis of furosine in fresh and processed ginsengs

Background

Furosine (ɛ-N-2-furoylmethyl-L-lysine, FML) is an amino acid derivative, which is considered to be an important indicator of the extent of damage (deteriorating the quality of amino acid and proteins due to a blockage of lysine and a decrease in the digestibility of proteins) during the early stages of the Maillard reaction. In addition, FML has been proven to be harmful because it is closely related to a variety of diseases such as diabetes. The qualitative analysis of FML in fresh and processed ginsengs was confirmed using HPLC-MS.

Methods

An ion-pair reversed-phase LC method was used for the quantitative analysis of FML in various ginseng samples.

Results

The contents of FML in the ginseng samples were 3.35–42.28 g/kg protein. The lowest value was observed in the freshly collected ginseng samples, and the highest value was found in the black ginseng concentrate. Heat treatment and honey addition significantly increased the FML content from 3.35 g/kg protein to 42.28 g/kg protein.

Conclusion

These results indicate that FML is a promising indicator to estimate the heat treatment degree and honey addition level during the manufacture of ginseng products. The FML content is also an important parameter to identity the quality of ginseng products. In addition, the generation and regulation of potentially harmful Maillard reaction products-FML in ginseng processing was also investigated, providing a solid theoretical foundation and valuable reference for safe ginseng processing.

Effect of quality of milk on maillard reaction and protein oxidation during preparation of cow and buffalo milk khoa

The browning indicators (Lactulose, HMF and Furosine) and protein bound carbonyls were used to assess the effect of developed acidity and subsequent neutralization of milk at various stages of khoa (heat desiccated milk product) preparation. Available lysine was also analyzed in raw milk and final product i.e. khoa. Available lysine decreased as milk progressed to khoa preparation. Present study indicated that increase in heating intensity resulted in increased concentration of browning indicators and protein bound carbonyls (PC) in boiled milk and khoa. Concentration of browning indicators was found to be significantly higher in buffalo milk and khoa samples whereas, PCconc. was higher in cow milk and khoa samples. Neutralization of milk significantly affected Maillard reaction by elevating concentration of browning indicators and PC in both milk and khoa.

Review: Selected indicators of the quality of thermal processed milk / Revisión: Indicadores seleccionados para el control de calidad de la leche tratada térmicamente

Selected indicators of the quality of processed milk are reviewed in three sections: indices of heat treatment, detection of adulterations and assessment of shelf life. The characterization of the thermal process to which milk was submitted can be achieved by measuring either the formation of new compounds (lactulose, furosine) or the degradation of thermolabile constituents (enzymes, whey proteins). The presence of certain compounds may indicate fraudulent additions committed for eco nomic reasons. Finally, residual or reactivated heat stable enzymes may cause serious storage defects in UHT milk and, therefore, the proteolytic and lipolytic activities and the degree of protein and lipid degradation are useful predictors of the shelf life. Different analytical methods for the determination of the selected quality indicators are also summarized.

Identification and quantification of bovine protein lactosylation sites in different milk products

The microbiological safety of milk is typically guaranteed by thermal treatments, such as pasteurization and ultra high temperature (UHT) treatment, whereas infant formula (IF) is often produced at even harsher conditions including a drying process. Thermal treatments have raised concerns, as they may denature proteins and initiate protein modifications. Previous studies identified already many lactosylation sites in milk and showed that the lactosylation degree of some proteins correlates to thermal treatment conditions. Here, we studied the glycation degrees of 124 lactosylation sites in 28 bovine milk proteins in raw milk, three brands of pasteurized milk, three brands of UHT milk, and five brands of IF. Whereas, the glycation degree of many lactosylation sites increased from raw milk, to pasteurized milk, UHT milk, and IF, several modification sites showed a different behavior indicating that global measures do not correctly reflect the reactivity of distinct sites. Interestingly, the glycation degrees varied considerably among the brands of UHT milk and IF indicating that specific production processes of a company have to be considered and not only the classification of milk as pasteurized or UHT. Thus, proper adjustments of the technical processes should allow reducing the lactosylation levels in both UHT milk and IF.

SIGNIFICANCE

It is well established that thermal treatment of milk triggers protein modifications, such as lactosylation of lysine residues in several proteins, although the extent of lactosylation has not been quantitatively compared for a broad panel of protein lactosylation sites among different commercial products. The current study extends previous reports by relatively quantifying 124 confirmed lactosylation sites in 28 bovine milk proteins including several low abundant proteins. Whereas, glycation is generally assumed to be an unspecific chemical reaction with the modification degrees depending on the protein and sugar concentrations, we could show that each protein and even each lactosylation site in a given protein is differently affected by thermal processes indicating that the global lactosylation degrees will not allow predicting the influence of a technical process on individual proteins and lactosylation sites. Additionally, we could show that brands of each milk product differ significantly in their glycation degrees with UHT milk brands for example spanning the whole range from the relatively low lactosylation degree of pasteurized milk to the rather high lactosylation degree of IF. Similar differences were obtained for IF that generally showed the highest glycation degree. The targeted quantification approach established and validated here will be useful to reveal technical processing steps that trigger individual lactosylation sites and thus can help to prevent such unwanted reactions. Even slight changes of the technical processes might allow reducing the lactosylation degree of milk proteins significantly without challenging the microbiological safety or affecting consumer behavior.

Assessment of heat treatment of various types of milk

Raw milk (RM), reconstituted condensed milk (CM) and three types of reconstituted milk powders (SMPs) were heated indirectly at 80-140°C for 4 s. Native β-lactoglobulin after 90°C treatment of RM was 1132±167 mg/L but no reliable quantities were estimated at temperatures >100°C, whereas 218±43 mg/L residual α-lactalbumin were found at 130°C. Average lactulose contents from 51 to 1549 mg/L were detected at ⩾100°C; average furosine was 1.9 and 126.5 mg/L in raw and 140°C treated milks respectively. The behaviour of heated CM was similar to that of heated RM except for higher furosine concentration. Reconstituted SMPs contained high quantities of lactulose and furosine, the ratio of which was lower than in similarly treated RM. Among the market milks analysed, the group of high-pasteurised milks was highly variable; i.e. native β-lactoglobulin was 69-2831 mg/L, lactulose 0-824 mg/L and furosine 3.3-68.8 mg/L.

Changes in chemical composition and antioxidative properties of rye ginger cakes during their shelf-life

Changes in chemical composition and antioxidative properties of rye ginger cakes during their shelf-life were investigated in this study. In particular, the changes in antioxidants content, antioxidative and reducing capacity, and Maillard reaction development in rye ginger cakes after long-term storage were addressed. Ginger cakes produced according to the traditional and current recipe were stored for 5 years at room temperature in a dark place. The total phenolic compounds (TPC), inositol hexaphosphate (IP6), reduced (GSH) and oxidised glutathione (GSSG) contents, antioxidant and reducing capacity and Maillard reaction products (MRPs) were determined in ginger cakes after storage and then compared to those measured after baking. After long-term storage a decrease in TPC and IP6 contents in cakes was noted. In contrast, an increase in antioxidative and reducing capacity of stored cakes was observed. Long-term storage induced formation of furosine, advanced and final Maillard reaction products and caused changes in both reduced and oxidised forms of glutathione. After long-term storage the modest changes in furosine, FAST index and browning in ginger cake formulated with dark rye flour may suggest that this product is the healthiest among others. Therefore, traditional rye ginger cakes can be considered as an example of a healthy food that is also relatively stable during long term storage as noted by the small chemical changes observed in its composition.

Maillard reaction and protein cross-linking in relation to the solubility of milk powders

Protein changes in relation to solubility, Maillard reaction (MR), and protein cross-linking in whole milk powder (WMP), skim milk powder (SMP), and whey protein concentrate (WPC) stored at different relative humidities (RHs) were investigated by chemical and electrophoretic methods. WMP and SMP reached minimum solubility rapidly, while WPC showed no change in solubility. The loss of solubility corresponded with development of high-molecular-weight protein complexes observed by two-dimensional electrophoresis. The maximal MR rate occurred at 66% RH for WMP and SMP (high lactose/protein ratios) and 84% RH for WPC (low lactose/protein ratios) based on the furosine and hydroxymethylfurfural contents. However, browning was greatest at 84% RH in all powders. The minimum solubility corresponded with the casein and fat contents. The retention of solubility and minimal protein cross-linking of WPC compared to casein-containing powders suggest that the casein content and cross-linking strongly influence the decrease in the solubility of milk powder.

Chemical and physical changes in milk protein concentrate (MPC80) powder during storage

The solubility and chemical changes due to the Maillard reaction were investigated in milk protein concentrate powder containing 80% protein (MPC80) during storage at temperatures and relative humidities in the ranges of 25-40 °C and 44-84%, respectively. The Maillard reaction was studied by measuring furosine (a product of lactosylated protein after digestion with acid) and free hydroxymethylfurfural (HMF) contents by HPLC and L*, a*, b* values with a color-meter. Furosine, free HMF, and browning in MPC80 increased during storage, whereas the solubility decreased. The correlation between the Maillard reaction and solubility loss was explored in modified MPC80 to which glucose was added to enhance the rate of the Maillard reaction. More furosine and brown pigments were observed in the glucose-containing MPC80 than in MPC80 with added lactose. The opposite trend occurred for solubility, suggesting that the Maillard reaction may be a cause of solubility loss in MPC powder.

Detection of milk powder and caseinates in Halloumi cheese

Halloumi cheese is traditionally manufactured from fresh milk. Nevertheless, dried dairy ingredients are sometimes illegally added to increase cheese yield. Lysinoalanine and furosine are newly formed molecules generated by heating and drying milk protein components. The levels of these molecular markers in the finished Halloumi have been investigated to verify their suitability to reveal the addition of skim milk powder and calcium caseinate to cheese milk. Because of the severe heating conditions applied in curd cooking, genuine Halloumi cheeses (n=35), representative of the Cyprus production, were characterized by levels of lysinoalanine (mean value=8.1 mg/100g of protein) and furosine (mean value=123 mg/100g of protein) unusual for natural cheeses. Despite the variability of the values, a good correlation between the 2 parameters (R=0.975) has been found in all cheeses, considering both the fresh and mature cheeses as well as those obtained from curd submitted to a prolonged cooking following a traditional practice adopted by a very small number of manufacturers. Experimental cheeses made by adding as low as 5% of skim milk powder, or calcium caseinate, or both, to cheese milk fell outside the prediction limits at +/-2 standard deviation of the above-reported correlation regardless of curd cooking conditions or ripening length. This correlation may be adopted as a reliable index of Halloumi cheese genuineness.

Milk Powders Ageing: Effect on Physical and Functional Properties

Milk powders are now considered as food ingredients, mainly because of the functional properties of milk proteins. During the storage of milk powders, many physicochemical damages, mainly dependent on lactose glass transition occur. They have important consequences on physical (flowability) and functional properties (solubility, emulsifying, and foaming properties) of milk powders. First, lactose crystallization modifies the microstructure and chemical composition of the surface of powder particles. Thus, milk powders flowability is decreased. Since the structure of milk proteins is destabilized, its solubility is damaged. Moreover, particle collapse and caking occur and mainly decrease the physical properties of milk powders (density and flowability). The mechanical stresses involved may also enhance proteins unfolding, which is detrimental to solubility. Finally, molecular mobility is favored upon ageing, and both chemical (Maillard reaction) and enzymatic reactions occur. Maillard reaction and oxidation enhance protein interactions and aggregations, which mainly lessen milk powders solubility. Maillard reaction also decreases emulsifying and foaming properties. Storage temperature and relative humidity have been considered as the predominant factors involved, but time, milk components, and their physical state also have been implied.

From Time Temperature Integrator Kinetics to Time Temperature Integrator Tolerance Levels: Heat-Treated Milk

Six milk compounds were studied as potential intrinsic time temperature integrators (TTIs) for the assessment of heat-treated milk. These include the enzymes alkaline phosphatase and lactoperoxidase, the whey protein beta-lactoglobulin and the chemical compounds hydroxymethylfurfural, lactulose and furosine. In previous research the inactivation/denaturation/formation kinetics of these compounds were analyzed under isothermal and nonisothermal conditions and evaluated for variability of the milk composition. The present paper focuses on the implementation of the TTIs. TTIs are validated with respect to microbiological indices and quality attributes, and a quantitative relationship between the denaturation, inactivation or formation of the TTIs and technological processes is established by construction of general time temperature tolerance (TTT) diagrams. In these diagrams temperature time combinations are presented, which lead to the same formation, inactivation or denaturation of TTIs, or result in the same level of microbiological destruction or quality degradation of the product. TTT-diagrams are very informative since they allow visualization of the impact of a thermal process on milk and evaluation of criteria for evaluating milk authenticity (conformity of the product with the terminology applied). Moreover, the optimum combination of temperature and time of heating may be readily deduced from these diagrams.

CE: a useful analytical tool for the characterization of Maillard reaction products in foods

The Maillard reaction (MR) is a complex series of nonenzymatic reactions between reducing compounds and amines, amino acids, peptides, or proteins that play an important role in the formation of flavors and colors in foods during processing and storage. Also, the antioxidant properties of some Maillard reaction products (MRP) was an additional benefit reported. On the other hand, these reactions decrease the nutritional quality of foods and may result in the formation of toxic MRP. Although, research to assess the risks and benefits associated with the consumption of MRP in the diet is still awaiting for new analytical methodologies to be developed. Structural characterization of MRP has been very challenging due to the chemical diversity of these compounds which present a wide range of polarities and molecular weights, making analyses difficult. CE is a technique that has gained popularity for the separation of complex mixtures that have otherwise proved difficult to analyze. Thus, the purpose of this overview is to give the reader an appreciation of some of the CE analytical developments on the analysis of MRP in model systems and foods, and to address the potential of CE on the characterization of this complex group of compounds.

Nonenzymatic browning of lactose and caseinate during dry heating at different relative humidities

Dry mixtures of lactose and caseinate were heated at 60 degrees C for up to 96 h at different relative humidities (RHs) ranging from 29 to 95%. The resulting nonenzymatic browning was studied by determining lactulosyl lysine formation in the caseinate (as measured by the conversion to furosine), amount of reacted lactose, loss of lysine, color formation, and fluorescent intensity. For each measurement, the maximum reaction occurred at intermediate RHs. While there is general agreement between the results obtained by different methods, discrepancies are understandable given the complex nature of nonenzymatic browning. It was shown that the degradation of the Amadori product, lactulosyl lysine, increased with RH. Moreover, the Maillard reaction, as opposed to caramelization of lactose, was the major pathway at all RHs. Visible browning occurred when the destruction of Amadori product became dominant, and interactions between sugar fragments and caseinate were not the rate-limiting steps in the nonenzymatic browning.

Application of Fluorescence Spectroscopy for Monitoring Changes in Nonfat Dry Milk During Storage

The objective of this study was to determine if fluorescence spectroscopy could be used to characterize the biochemical characteristics of nonfat dry milk (NDM) caused by manufacturing and storage conditions. Nine low-heat NDM samples were collected from 3 manufacturers and stored at 4 temperatures (4, 22, 35, and 50 degrees C) for 8 wk. The spectra of Maillard products, tryptophan, and riboflavin were recorded and analyzed with principal components analysis. Colorimetric indices L*, a*, and b* were also determined. The before-storage NDM samples collected from each manufacturer had different fluorescent characteristics. Inconsistency was observed for the NDM samples collected from 1 manufacturer, whereas the samples from the other 2 manufacturers displayed consistent fluorescence characteristics. Biochemical reactions, such as Maillard reaction, modification of the tryptophan environment, and degradation of riboflavin occurred during the manufacturing process. For each of the data collections, discrimination of the NDM samples stored at 50 degrees C from the samples stored at 4, 22, and 35 degrees C was observed in the similarity maps. The factor loadings of the first 2 principal components for the fluorescence spectra of the samples before storage were similar to the principal components analysis results of the samples during storage. It appears that similar factors are responsible for the variation in the samples before storage and their changes during storage. Additionally, storage of the samples at 50 degrees C accelerated these reactions. The results demonstrate that front-face fluorescence spectroscopy, coupled with multivariate statistical methods, can be utilized as an analytical technique to monitor variation in NDM samples from different manufacturers and changes during storage.

Baby Foods: Formulations and Interactions (A Review)

Infant foods have a special place among food products mainly because of nutritional aspects and preparations methods. A great increase of baby foods incomes is predicted in near future. Formulation, handling, and storage of baby foods are important to keep nutritional quality and physicochemical properties of these foods. During storage some reactions and interactions occur which change physicochemical and nutritional properties of baby foods. Lactose crystallization, Maillard reaction, oxidation, and interactions between micronutrients and other components are the most important aspect of preparation and storage of baby foods. These reactions and interactions influence physical properties such as flowability of powder, solubility, and other functional properties. Controlling of storage conditions such as temperature and moisture content and oxygen quantity in headspace of product is required to keep product quality. In this paper the composition and interactions of baby foods between major components and their effect on nutritional quality of baby foods are explained.

Modeling of Lactose Crystallization and Color Changes in Model Infant Foods

Lactose crystallization and color changes in formulas containing beta-lactoglobulin and gelatinized starch were investigated. Model infant formulas were prepared by colyophilization of 3 components (lactose, beta-lactoglobulin, and gelatinized starch). A mixture design was used to choose the percentage of each mixture component. These formulas were stored for 3 mo at different relative humidities (RH), ranging from approximately 0 to 94.6%, to study the lactose crystallization and color changes. Crystallization kinetics was studied by gravimetric methods, and lactose state (crystalline vs. amorphous) was verified before and after storage by differential scanning calorimetry. Before storage, lyophilized lactose was amorphous, but during storage it crystallized, depending on the RH. The lactose crystallization RH depended on the quantity of beta-lactoglobulin and gelatinized starch, and by increasing these quantities, the crystallization RH increased. For some formulas, the crystallization RH was noted at 3 different RH during storage. The first was noted after 1 d of storage and the second and third were observed later on, showing that crystallization is a time-dependent phenomenon. Nonenzymatic browning was studied in model infant formulas by yellow color changes of samples at 11.3, 43.2, 54.5, and 75.4% RH. In this study, 7 mathematical models were proposed to predict the moisture sorption properties and color changes at different RH, and the models were validated by experimental results.

Contribution of mass spectrometry to assess quality of milk-based products

The vast knowledge of milk chemistry has been extensively used by the dairy manufacturing industry to develop and optimize the modern technology required to produce high-quality milk products to which we are accustomed. A thorough understanding of the chemistry of milk and its numerous components is essential for designing processing equipment and conditions needed for the manufacture and distribution of high-quality dairy products. Knowledge and application of milk chemistry is also indispensable for fractionating milk into its principal components for use as functional and nutritional ingredients by the food industry. For all these reasons, powerful analytical methods are required. Because of the complexity of the milk matrix, mass spectrometry, coupled or not to separation techniques, constitutes a key tool in this area. In the present manuscript, we review the contribution and potentialities of mass spectrometry-based techniques to assess quality of milk-based products.

Temperature effect on lactose crystallization, maillard reactions, and lipid oxidation in whole milk powder

Whole milk powder with an initial water content of 4.4% (w/w) and a water activity of 0.23 stored in hermetically sealed vials for up to 147 days below (37 and 45 degrees C) and above (55 degrees C) the glass transition temperature (T(g) determined to have the value 48 degrees C) showed a strong temperature dependence for quality deterioration corresponding to energies of activation close to 200 kJ/mol for most deteriorative processes. The glass transition was found not to cause any deviation from Arrhenius temperature dependence. Lactose crystallization, which occurred as a gradual process as monitored by isothermal calorimetry, is concluded to liberate bound water (a(w) increase to 0.46) with a modest time delay (approximately 2 days at 55 degrees C) and with concomitant surface browning as evidenced by an increasing Hunter b-value. Browning and formation of bound hydroxymethyl-furfural determined by HPLC seem to be coupled, while formation of another Maillard reaction product, furosine, occurred gradually and was initiated prior to crystallization. Initiation of lipid oxidation, as detected by lipid-derived radicals (high g-value ESR spectra), and progression of lipid oxidation, as detected by headspace GC, seem not to be affected by lactose crystallization and browning, and no indication of browning products acting as antioxidants could be determined.

Effects of Sterilization, Packaging, and Storage on Vitamin C Degradation, Protein Denaturation, and Glycation in Fortified Milks

Monitoring the nutritional quality of dietetic milk throughout its shelf life is particularly important due to the high susceptibility of some vitamins to oxidation, and the continuous development of the Maillard reaction during storage. The objective of this paper was to evaluate the vitamin C content and protein modification by denaturation and glycation on fortified milk samples (growth milks) destined for 1- to 3-yr-old children. The influences of the sterilization process, formulation, packaging, and storage duration at ambient temperature in the dark were studied. Vitamin C degradation was particularly influenced by type of packaging. The use of a 3-layered opaque bottle was associated with complete oxidation of vitamin C after 1 mo of storage, whereas in the 6-layered opaque bottle, which has an oxygen barrier, the vitamin C content slowly decreased to reach 25% of the initial concentration after 4 mo of storage. However, no significant effect of vitamin C degradation during storage could be observed in terms of Maillard reaction, despite the fact that a probable impact occurred during sterilization. Furosine content and the FAST (fluorescence of advanced Maillard products and soluble tryptophan) index-indicators of the early and advanced Maillard reaction, respectively-were significantly higher in the in-bottle sterilized milk samples compared with UHT samples, and in fortified milk samples compared with cow milk. However, after 1 mo, the impact of storage was predominant, increasing the furosine level and the FAST index at similar levels for the differently processed samples. The early Maillard reaction developed continuously throughout the storage period.In conclusion, only packaging comprising an oxygen and light barrier is compatible with vitamin C fortification of milk. Furthermore, short storage time or low storage temperature is needed to retard vitamin C degradation, protein denaturation, and development of the Maillard reaction.

High-performance liquid chromatographic determination of Maillard compounds in store-brand and name-brand ultra-high-temperature-treated cows' milk

Furosine and furfural products of the Maillard reaction are used as specific indicators of the effect of heating treatments on milk quality. Their contents were measured in representative samples of store- and name-brand ultra-high-temperature-treated milks using RP-HPLC with UV detection. Furosine contents ranged from 40.32 to 50.67 and from 65.48 to 310.58 mg/100 g protein in name- and store-brand milks, respectively. Of the furfurals, only hydroxymethylfurfural was detected. The free hydroxymethylfurfural contents of store-brand milks ranged from 0.22 to 1.70 mg/100 g protein. Total hydroxymethylfurfural contents ranged from 0.29 to 0.41 and from 0.72 to 2.21 mg/100 g protein, for name- and store-brands, respectively.