The critical role of detergents in the crystallization of membrane proteins

Nanostructured lipopeptide-based membranomimetics for stabilizing bacteriorhodopsin

Nanostructured 7-9-residue cyclic and unstructured lipopeptide-based facial detergents have been engineered to stabilize the model integral membrane protein, bacteriorhodopsin. Formation of a cylindrical-type micelle assembly induced by facial amphipathic lipopeptides resembles a biological membrane more effectively than conventional micelles. The hydrophobic face of this cylindrical-type micelle provides extended stability to the membrane protein and the hydrophilic surface interacts with an aqueous environment. In our present study, we have demonstrated experimentally and computationally that lipopeptide-based facial detergents having an unstructured or β-turn conformation can stabilize membrane proteins. However, constrained peptide detergents can provide enhanced stability to bacteriorhodopsin. In this study, we have computationally examined the structural stability of bacteriorhodopsin in the presence of helical, beta-strand, and cyclic unstructured peptide detergents, and conventional detergent-like peptides. Our study demonstrates that optimal membranomimetics (detergents) for stabilizing a specific membrane protein can be screened based on the following criteria: (i) hydrodynamic radii of the self-assembled peptide detergents, (ii) stability assay of detergent-encased membrane proteins, (iii) percentage covered area of detergent-encased membrane proteins obtained computationally and (iv) protein-detergent interaction energy.

His1-tagged DM or DDM detergent micelles are reversibly conjugated by nickel ions

Specific conjugation of decyl β-D-maltoside (DM) or dodecyl β-D-maltoside (DDM) detergent micelles is accomplished between pH 7.0-8.5 in the presence of an amphiphilic analog of the amino acid histidine, bound to a 10-carbon hydrocarbon chain (His1-C10) and Ni2+ ions. Following addition of 10-15 wt% PEG-6000 as precipitant, phase separation in the form of oil-rich globules (30-600 µm) is observed by light microscopy. Other divalent cations: Zn2+, Fe2+, Cu2+ lead to dark precipitates rather than colorless globules; while Mg2+, Ca2+ do not promote any phase separation at all. Even in the absence of precipitant, dynamic light scattering (DLS) measurements demonstrate that DM micelles (hydrodynamic size ~ 6 nm) or DDM micelles (8 nm) self-associate into larger particles (9 nm and 411 nm for DM; 10 nm and 982 nm for DDM) in the presence of His1-C10 and nickel ions. Micellar conjugation is partially reversible in the presence of water soluble 50 mM EDTA, histidine or imidazole chelators. Cryo-transmission electron microscopy (cryo-TEM) imaging revealed the formation of non-uniformly dense detergent aggregates for both DM and DDM micelles in the presence of precipitant. The possible utility of such His1-tagged DM or DDM micelles for promoting crystallization of integral membrane proteins is discussed.

Characterization of New Detergents and Detergent Mimetics by Scattering Techniques for Membrane Protein Crystallization

Membrane proteins are difficult to manipulate and stabilize once they have been removed from their native membranes. However, despite these difficulties, successes in membrane-protein structure determination have continued to accumulate for over two decades, thanks to advances in chemistry and technology. Many of these advances have resulted from efforts focused on protein engineering, high-throughput expression, and development of detergent screens, all with the aim of enhancing protein stability for biochemistry and biophysical studies. In contrast, considerably less work has been done to decipher the basic mechanisms that underlie the structure of protein-detergent complexes and to describe the influence of detergent structure on stabilization and crystallization. These questions can be addressed using scattering techniques (employing light, X-rays, and/or neutrons), which are suitable to describe the structure and conformation of macromolecules in solution, as well as to assess weak interactions between particles, both of which are clearly germane to crystallization. These techniques can be used either in batch modes or coupled to size-exclusion chromatography, and offer the potential to describe the conformation of a detergent-solubilized membrane protein and to quantify and model detergent bound to the protein in order to optimize crystal packing. We will describe relevant techniques and present examples of scattering experiments, which allow one to explore interactions between micelles and between membrane protein complexes, and relate these interactions to membrane protein crystallization.

Membrane Protein Crystallisation: Current Trends and Future Perspectives

Alpha helical membrane proteins are the targets for many pharmaceutical drugs and play important roles in physiology and disease processes. In recent years, substantial progress has been made in determining their atomic structure using X-ray crystallography. However, a major bottleneck still remains; the identification of conditions that give crystals that are suitable for structure determination. Over the past 10 years we have been analysing the crystallisation conditions reported for alpha helical membrane proteins with the aim to facilitate a rational approach to the design and implementation of successful crystallisation screens. The result has been the development of MemGold, MemGold2 and the additive screen MemAdvantage. The associated analysis, summarised and updated in this chapter, has revealed a number of surprisingly successfully strategies for crystallisation and detergent selection.

Oligomeric states of the Shigella translocator protein IpaB provide structural insights into formation of the type III secretion translocon

The Shigella flexneri Type III secretion system (T3SS) senses contact with human intestinal cells and injects effector proteins that promote pathogen entry as the first step in causing life threatening bacillary dysentery (shigellosis). The Shigella Type III secretion apparatus (T3SA) consists of an anchoring basal body, an exposed needle, and a temporally assembled tip complex. Exposure to environmental small molecules recruits IpaB, the first hydrophobic translocator protein, to the maturing tip complex. IpaB then senses contact with a host cell membrane, forming the translocon pore through which effectors are delivered to the host cytoplasm. Within the bacterium, IpaB exists as a heterodimer with its chaperone IpgC; however, IpaB's structural state following secretion is unknown due to difficulties isolating stable protein. We have overcome this by coexpressing the IpaB/IpgC heterodimer and isolating IpaB by incubating the complex in mild detergents. Interestingly, preparation of IpaB with n-octyl-oligo-oxyethylene (OPOE) results in the assembly of discrete oligomers while purification in N,N-dimethyldodecylamine N-oxide (LDAO) maintains IpaB as a monomer. In this study, we demonstrate that IpaB tetramers penetrate phospholipid membranes to allow a size-dependent release of small molecules, suggesting the formation of discrete pores. Monomeric IpaB also interacts with liposomes but fails to disrupt them. From these and additional findings, we propose that IpaB can exist as a tetramer having inherent flexibility, which allows it to cooperatively interact with and insert into host cell membranes. This event may then lay the foundation for formation of the Shigella T3SS translocon pore.

Restoration of the missing cone in protein electron crystallography by direct methods: bacteriorhodopsin

The x-ray crystal structure of bacteriorhodopsin was used to generate model electron diffraction amplitudes and phases, referring to an electron crystallographic determination to isolate the details of a 52 Å-thick single layer in plane group p3 will cell constants: a = b = 62 Å. For these ideal data, phase extension by direct methods (Sayre equation) was shown to restore phase values within missing cones (defined by limited goniometric tilts of ±45, ±60, and ±70°) to reasonable accuracy. Restoration of amplitude information was much less satisfactory than the result found for phase terms. Nevertheless, with a crude amplitude estimate, it was found that, even at 6 Å diffraction resolution, details of the peptide folds linking the transmembrane helices could be observed in the three dimensional potential maps.

Effects of additives on surfactant phase behavior relevant to bacteriorhodopsin crystallization

The interactions leading to crystallization of the integral membrane protein bacteriorhodopsin solubilized in n-octyl-beta-D-glucoside were investigated. Osmotic second virial coefficients (B(22)) were measured by self-interaction chromatography using a wide range of additives and precipitants, including polyethylene glycol (PEG) and heptane-1,2,3-triol (HT). In all cases, attractive protein-detergent complex (PDC) interactions were observed near the surfactant cloud point temperature, and there is a correlation between the surfactant cloud point temperatures and PDC B(22) values. Light scattering, isothermal titration calorimetry, and tensiometry reveal that although the underlying reasons for the patterns of interaction may be different for various combinations of precipitants and additives, surfactant phase behavior plays an important role in promoting crystallization. In most cases, solution conditions that led to crystallization fell within a similar range of slightly negative B(22) values, suggesting that weakly attractive interactions are important as they are for soluble proteins. However, the sensitivity of the cloud point temperatures and resultant coexistence curves varied significantly as a function of precipitant type, which suggests that different types of forces are involved in driving phase separation depending on the precipitant used.

Solution NMR of membrane proteins: practice and challenges

This review focuses upon the application of solution NMR methods to multispan integral membrane proteins, particularly with respect to determination of global folds by this approach. Practical methods are described along with the special difficulties that confront the application of solution NMR to proteins that dwell in the netherworld of the lipid bilayer.

Crystallization of bacteriorhodopsin solubilized by a tripod amphiphile

Bacteriorhodopsin (bR) is solubilized efficiently as a monomer by a novel surfactant, a tripod amphiphile (TPA), which permits the formation of purple hexagonal bR crystals under several conditions. The crystals, although small, diffract to 2.5 A resolution using synchrotron radiation. TPA may be useful for the solubilization, purification, and crystallization of other membrane proteins.

Membrane protein crystallization

The need for high-resolution structure information on membrane proteins is immediate and growing. Currently, the only reliable way to get it is crystallographically. The rate-limiting step from protein to structure is crystal production. An overview of the current ideas and experimental approaches prevailing in the area of membrane protein crystallization is presented. The long-established surfactant-based method has been reviewed extensively and is not examined in detail here. The focus instead is on the latest methods, all of which exploit the spontaneous self-assembling properties of lipids and detergent as vesicles (vesicle-fusion method), discoidal micelles (bicelle method), and liquid crystals or mesophases (in meso or cubic-phase method). In the belief that a knowledge of the underlying phase science is integral to understanding the molecular basis of these assorted crystallization strategies, the article begins with a brief primer on lipids, mesophases, and phase science, and the related issue of form and function as applied to lipids is addressed. The experimental challenges associated with and the solutions for procuring adequate amounts of homogeneous membrane proteins, or parts thereof, are examined. The cubic-phase method is described from the following perspectives: how it is done in practice, its general applicability and successes to date, and the nature of the mesophases integral to the process. Practical aspects of the method are examined with regard to salt, detergent, and screen solution effects; crystallization at low temperatures; tailoring the cubic phase to suit the target protein; different cubic-phase types; dealing with low-protein samples, colorless proteins, microcrystals, and radiation damage; transport within the cubic phase for drug design, cofactor retention, and phasing; using spectroscopy for quality control; harvesting crystals; and miniaturization and robotization for high-throughput screening. The section ends with a hypothesis for nucleation and growth of membrane protein crystals in meso. Thus far, the bicelle and vesicle-fusion methods have produced crystals of one membrane protein, bacteriorhodopsin. The experimental details of both methods are reviewed and their general applicability in the future is commented on. The three new methods are rationalized by analogy to crystallization in microgravity and with respect to epitaxy. A list of Web resources in the area of membrane protein crystallogenesis is included.

Rationalization of membrane protein crystallization with polyethylene glycol using a simple depletion model

Based on the importance of crystallizing membrane proteins in a rational way, cytochrome bc(1) complex (BC1) was crystallized using polyethylene glycol (PEG) as a sole crystallization agent. Interaction between protein-detergent complexes of BC1 was estimated by dynamic light scattering, and was compared with the numerical calculation using the Derjaguin-Landau-Verwey-Overbeek potential plus a depletion potential, without considering specific surface properties of the protein-detergent complexes. The experiments and calculation were found to be consistent and we obtained a relation between PEG molecular weight M and the range of depletion zone delta as delta approximately M(0.48+/-0.02). The stability of liquid phase of BC1 solutions was controlled by a ratio of (the range of depletion zone)/(the radius of a BC1 particle), which was consistent with recent theoretical predictions. The crystallization was most successful under a condition where the stability of the liquid phase changed from stable to unstable. The PEG molecular weight that fulfilled this condition coincided with the one used empirically to crystallize BC1 in the past by a number of groups. These results are compared to the fact that membrane proteins were often successfully crystallized close to the detergent cloud point.

Two-dimensional crystallogenesis of transmembrane proteins

Two-dimensional crystallogenesis is a crucial step in the long road that leads to the determination of macromolecules structure via electron crystallography. The necessity of having large and highly ordered samples can hold back the resolution of structural works for a long time, and this, despite improvements made in electron microscopes or image processing. Today, finding good conditions for growing two-dimensional crystals still rely on either "biocrystallo-cooks" or on lucky ones. The present review presents the field by first describing the different crystals that one can encounter and the different crystallisation methods used. Then, the effects of different components (such as protein, lipids, detergent, buffer, and temperature) and the different methods (dialysis, hydrophobic adsorption) are discussed. This discussion is punctuated by correspondences made to the world of three-dimensional crystallogenesis. Finally, a guide for setting up 2D crystallogenesis experiments, built on the discussion mentioned before, is proposed to the reader. More than giving recipes, this review is meant to open up the discussions in this field.

Approaches to determining membrane protein structures to high resolution: do selections of subpopulations occur?

Three different methods are currently used for the study of high-resolution structures of membrane proteins: X-ray crystallography, electron crystallography, and nuclear magnetic resonance (NMR) spectroscopy. Thus far, all methods combined have yielded a rather modest number of crystal structures that have been solved at the atomic level. It is hypothesized here that different methods may select different populations of proteins on the basis of various properties. Thus, protein stability may be a significant factor in the formation of three-dimensional (3D) crystals from detergent solutions, since exposure of hydrophobic protein zones to water may cause structural perturbation or denaturation in conformationally labile proteins. This is different in the formation of two-dimensional (2D) crystals where a protein remains protected in its native membrane environment. A biological selection mechanism may therefore be operative in that highly ordered lattices may form only if strong protein-protein interactions are relevant in vivo, thereby limiting the number of proteins that are amenable to electron crystallography. Keeping a protein in a bilayer environment throughout 3D crystallization maintains the lateral pressure existing in native membranes. This can be accomplished by using lipidic cubic phases. Alternatively, the hydrophobic interface of a membrane protein may be spared from contact with water by crystallization from organic solvents where the polar caps are protected in reverse micelles by using appropriate detergents. Some of the criteria that are useful in optimizing the various approaches are given. While the usefulness of complementary methods seems obvious, the results presented may be particularly critical in recognizing key problems in other structural approaches.

A lipid's eye view of membrane protein crystallization in mesophases

Lipidic mesophases have been used to produce diffraction-quality crystals of several membrane proteins. The mechanism by which the method works is a mystery. The thrust is to continue to use it whilst deciphering the underlying mechanism and solving the second 'phase problem' in membrane protein crystallography. The method, which probably shares similarities with crystal growth in microgravity, is examined here from a lipid and a phase science perspective.

Static light scattering studies of OmpF porin: implications for integral membrane protein crystallization

Integral membrane proteins carry out some of the most important functions of living cells, yet relatively few details are known about their structures. This is due, in large part, to the difficulties associated with preparing membrane protein crystals suitable for X-ray diffraction analysis. Mechanistic studies of membrane protein crystallization may provide insights that will aid in determining future membrane protein structures. Accordingly, the solution behavior of the bacterial outer membrane protein OmpF porin was studied by static light scattering under conditions favorable for crystal growth. The second osmotic virial coefficient (B22) was found to be a predictor of the crystallization behavior of porin, as has previously been found for soluble proteins. Both tetragonal and trigonal porin crystals were found to form only within a narrow window of B22 values located at approximately -0.5 to -2 X 10(-4) mol mL g(-2), which is similar to the "crystallization slot" observed for soluble proteins. The B22 behavior of protein-free detergent micelles proved very similar to that of porin-detergent complexes, suggesting that the detergent's contribution dominates the behavior of protein-detergent complexes under crystallizing conditions. This observation implies that, for any given detergent, it may be possible to construct membrane protein crystallization screens of general utility by manipulating the solution properties so as to drive detergent B22 values into the crystallization slot. Such screens would limit the screening effort to the detergent systems most likely to yield crystals, thereby minimizing protein requirements and improving productivity.

Outer membrane protein A of E. coli folds into detergent micelles, but not in the presence of monomeric detergent

Outer membrane protein A (OmpA) of Escherichia coli is a beta-barrel membrane protein that unfolds in 8 M urea to a random coil. OmpA refolds upon urea dilution in the presence of certain detergents or lipids. To examine the minimal requirements for secondary and tertiary structure formation in beta-barrel membrane proteins, folding of OmpA was studied as a function of the hydrophobic chain length, the chemical structure of the polar headgroup, and the concentration of a large array of amphiphiles. OmpA folded in the presence of detergents only above a critical minimal chain length of the apolar chain as determined by circular dichroism spectroscopy and a SDS-PAGE assay that measures tertiary structure formation. Details of the chemical structure of the polar headgroup were unimportant for folding. The minimal chain length required for folding correlated with the critical micelle concentration in each detergent series. Therefore, OmpA requires preformed detergent micelles for folding and does not adsorb monomeric detergent to its perimeter after folding. Formation of secondary and tertiary structure is thermodynamically coupled and strictly dependent on the interaction with aggregated amphiphiles.

Detergent-free membrane protein crystallization

A comprehensive understanding of structure-function relationships of proteins requires their structures to be elucidated to high resolution. With most membrane proteins this has not been accomplished so far, mainly because of their notoriously poor crystallizability. Here we present a completely detergent-free procedure for the incorporation of a native purple membrane into a monoolein-based lipidic cubic phase, and subsequent crystallization of three-dimensional bacteriorhodopsin crystals therein. These crystals exhibit comparable X-ray diffraction quality and mosaicity, and identical crystal habit and space group to those of bacteriorhodopsin crystals that are grown from detergent-solubilized protein in cubic phase.

It's not just a phase: crystallization and X-ray structure determination of bacteriorhodopsin in lipidic cubic phases

Utilization of lipidic cubic phases in the crystallization of bacteriorhodopsin (bR) has yielded long sought after crystals that diffract X-rays to 2 A resolution. The resulting structure provides new information on the protein conformation and the mechanism of proton translocation. Crystallization of bR via lipidic cubic phases may be a harbinger of new membrane protein crystallization strategies.

Two-dimensional crystallization of a bacterial surface protein on lipid vesicles under controlled conditions

The solubilized surface protein of the Gram-negative bacterium Comamonas acidovorans was reconstituted on lipid vesicles by means of controlled dialysis. To this end, a multichamber dialysis apparatus was built which allows one to control the temperature and the dialysis rate, to apply various temperatures or buffer systems and sample conditions in a single experiment, and to monitor the turbidity of the sample by means of light scattering. The reconstitution conditions were optimized such that the surface protein formed two-dimensional crystals suitable for electron crystallography. The recrystallized surface protein arrays gave a resolution of approximately 1.3 nm in projection after correlation averaging of negatively stained preparations. The surface protein assembled into partially self-contained two-dimensional crystals which possess a strong shape-determining effect and formed cylinders and various cone-shaped vesicles. The development of the various vesicle forms is described in a model.