Spectral analysis of laser Doppler signals in real time using digital processing

Comparison of laser speckle and laser Doppler perfusion imaging: measurement in human skin and rabbit articular tissue

Laser Doppler perfusion imaging (LDI) is currently used in a variety of clinical applications, however, LDI instruments produce images of low resolution and have long scan times. A new optical perfusion imager using a laser speckle measurement technique and its use for in vivo blood flow measurements are described. Measurements of human skin and surgically exposed rabbit tissue made using this instrument were compared with a commercial laser Doppler perfusion imaging instrument. Results from blood flow measurements showed that the laser speckle imager measured an 11-67% decrease in blood flow under arterial occlusion. Under similar conditions, the laser Doppler imager measured blood flow decreases of 21-63%. In comparison with LDI, it was observed that the higher temporal resolution of the laser speckle imager was more sensitive to measuring the hyperaemic response immediately following occlusion. This in vivo study demonstrated some of the several advantages laser speckle imaging has over conventional LDI, making the new instrument more versatile in a clinical environment.

A new single-fibre laser Doppler flowmeter based on digital signal processing

A new laser Doppler flowmeter, based on a personal computer with a digital signal processor for detecting the blood perfusion in skeletal muscle, was designed and evaluated. An infrared laser diode (750 nm) fed a single optical fibre, 400 microns in diameter, which was introduced into the muscle. A PC equipped with a digital processing unit was used for emulation of the laser Doppler algorithm and for presentation of the measurement results. The Doppler signal power spectral density and corresponding flow values were visualized on the computer screen continuously in real-time, and could also be saved on the hard disk for off-line analyses. The graphic-user interface supported by Labwindows software made the system easy to use. It is possible to alter in the software the signal processing and the ways in which the signals and results are presented. The new system was evaluated by using a flow model as well as a mechanical model. The model studies showed linear relationships between particle velocity and flow in the range of 0-5 mm s-1. The system was also tested in measurements of the blood flow in the brachioradial muscle, and was found to have advantages over our previously used systems.