Green synthesis of polysaccharide-based inorganic nanoparticles and biomedical aspects

Rethinking Nanoparticle Synthesis: A Sustainable Approach vs. Traditional Methods

This review portrays a comparison between green protocols and conventional nanoparticle (NP) synthesis strategies, highlighting each method's advantages and limitations. Various top-down and bottom-up methods in NP synthesis are described in detail. The green chemistry principles are emphasized for designing safe processes for nanomaterial synthesis. Among the green biogenic sources plant extracts, vitamins, enzymes, polysaccharides, fungi (Molds and mushrooms), bacteria, yeast, algae, and lichens are discussed. Limitations in the reproducibility of green protocols in terms of availability of raw material, variation in synthetic protocol, and selection of material due to geographical differences are elaborated. Finally, a conclusion is drawn utilizing green chemical principles, & a circular economy strategy to minimize waste generation, offering a promising framework for the synthesis of NPs emphasizing sustainability.

Characterization and Comparative Investigation of Hydroxyapatite/Carboxymethyl Cellulose (CaHA/CMC) Matrix for Soft Tissue Augmentation in a Rat Model

This study endeavors to develop an injectable subdermal implant material tailored for soft tissue repair and enhancement. The material consists of a ceramic phase of calcium hydroxyapatite (CaHA), which is biocompatible, 20-60 μm in size, known for its biocompatibility and minimal likelihood of causing foreign body reactions, antigenicity, and minimal inflammatory response, dispersed in a carrier phase composed of carboxymethyl cellulose (CMC), glycerol, and water for injection. The gel formulation underwent comprehensive characterization via various analytical techniques. X-ray diffraction (XRD) was employed to identify crystalline phases and investigate the structural properties of ceramic particles, while thermogravimetric analysis (TGA) was conducted to evaluate the thermal stability and decomposition behavior of the final formulation. Scanning electron microscopy (SEM) was utilized to examine the surface morphology and particle size distribution, confirming the homogeneous dispersion of spherical CaHA particles within the matrix. SEM analysis revealed particle sizes ranging from approximately 20-60 μm. Elemental analysis confirmed a stoichiometric Ca/P ratio of 1.65 in the hydroxyapatite (HA) structure. Heavy metal content exhibited suitability for surgical implant use without posing toxicity risks. Rheological analysis revealed a storage modulus of 58.6 and 68.9 kPa and a loss modulus of 21.7 and 24.8 kPa at the frequencies of 2 and 5 Hz, respectively. 150 μL of sterilized CaHA/CMC was injected subcutaneously into rats and compared with a similar product, Crystalys, to assess its effects on soft tissues. Skin tissue samples of rats were collected at specific intervals throughout the study (30, 45, 60, 90 and 120 days), and examined histologically. Results demonstrated that CaHA/CMC gel led to a significant increase in dermal thickness, elastic fibers, and collagen density. Based on the findings, the formulated CaHA/CMC gel was found to be biocompatible, biodegradable, nonimmunogenic, nontoxic, safe, and effective, and represents a promising option for soft tissue repair and augmentation.

Biogenic fabrication of a gold nanoparticle sensor for detection of Fe3+ ions using a smartphone and machine learning

In recent years, smartphones have been integrated into rapid colorimetric sensors for heavy metal ions, but challenges persist in accuracy and efficiency. Our study introduces a novel approach to utilize biogenic gold nanoparticle (AuNP) sensors in conjunction with designing a lightbox with a color reference and machine learning for detection of Fe3+ ions in water. AuNPs were synthesized using the aqueous extract of Eleutherine bulbosa leaf as reductants and stabilizing agents. Physicochemical analyses revealed diverse AuNP shapes and sizes with an average size of 19.8 nm, with a crystalline structure confirmed via SAED and XRD techniques. AuNPs exhibited high sensitivity and selectivity in detection of Fe3+ ions through UV-vis spectroscopy and smartphones, relying on nanoparticle aggregation. To enhance image quality, we developed a lightbox and implemented a reference color value for standardization, significantly improving performance of machine learning algorithms. Our method achieved approximately 6.7% higher evaluation metrics (R 2 = 0.8780) compared to non-normalized approaches (R 2 = 0.8207). This work presented a promising tool for quantitative Fe3+ ion analysis in water.

Magnetic core-shell cellulose system for the oriented immobilization of a recombinant β-galactosidase with a protein tag

The objective of this study was to immobilize a recombinant β-galactosidase (Gal) tagged with a cellulose-binding domain (CBD) onto a magnetic core-shell (CS) cellulose system. After 30 min of reaction, 4 U/capsule were immobilized (CS@Gal), resulting in levels of yield and efficiency exceeding 80 %. The optimal temperature for β-galactosidase-CBD activity increased from 40 to 50 °C following oriented immobilization. The inhibitory effect of galactose decreased in the enzyme reactions catalyzed by CS@Gal, and Mg2+ increased the immobilized enzyme activity by 40 % in the magnetic CS cellulose system. The relative enzyme activity of the CS@Gal was 20 % higher than that of the soluble enzyme activity after 20 min at 50 °C. The CS support and CS@Gal capsules exhibited an average size of 8 ± 1 mm, with the structure of the shell (alginate-pectin-cellulose) enveloping and isolating the magnetic core. The immobilized β-galactosidase-CBD within the magnetic CS cellulose system retained ∼80 % of its capacity to hydrolyze lactose from skim milk after 10 reuse cycles. This study unveils a novel and promising support for the oriented immobilization of recombinant β-galactosidase using a magnetic CS system and a CBD tag. This support facilitates β-galactosidase reuse and efficient separation, consequently enhancing the catalytic properties of the enzyme.

Development of silver nanoparticles based on the method using quince seed mucilage for ascorbic acid determination

INTRODUCTION

Nanoparticles are used in various fields such as chemistry, pharmacy, biotechnology, and food science since they provide higher sensitivity than traditional optical detection methods. Recently, synthesis of nanomaterials using green chemistry has become popular. Many phytochemical components are used in the synthesis of nanoparticles, including vitamins, proteins, polysaccharides, glycosides, essential oils and phenolic compounds.

OBJECTIVE

A novel green nanotechnology-based method using quince seed mucilage (QSM) was designed for the determination of ascorbic acid in pharmaceutical preparations. QSM, a natural polysaccharide, was used as a bioreducing and stabilizing reagent in the proposed silver nanoparticle (SNP)-based method.

METHOD

In the first stage of the developed method, silver(I) is reduced to silver(0) via QSM and spherical, homogeneous SNPs were prepared (QSM-SNPs). In the second stage of the developed method, SNPs nuclei were enlarged with the addition of ascorbic acid. The developed method was validated by performance parameters (linearity, recovery, and precision). Ascorbic acid determination was performed by measuring increase in absorbance at 420 nm.

RESULTS

The limit of detection and limit of quantification for ascorbic acid were, respectively, found to be at 0.27 and 0.90 μM. The QSM-SNP-based method was successfully applied to effervescent tablets containing ascorbic acid. The standards of the excipients frequently used in pharmaceutical preparations did not interfere with the developed method.

CONCLUSION

The developed QSM-SNP-based method satisfies the requirements of green nanotechnology. The developed QSM-SNP-based method is simple, fast, eco-friendly and low-cost.

Green Synthesis of Silver Nanoparticles using Morinda citrifolia Linn LeafExtract and its Antioxidant, Antibacterial and Anticancer Potential

INTRODUCTION

Nanomedicine has emerged as a revolutionary regimen for moderating communicable as well as non-communicable diseases.

PURPOSE

This study demonstrated the phytosynthesis of silver nanoparticles using M. citrifolia leaf extract (MC-AgNPs) and their in vitro antioxidant, antibacterial and anticancer potential.

MATERIALS AND METHODS

The Biosynthesis of MC-AgNPs was studied by spectroscopy and characterized by SEM, TEM, XRD and FTIR analysis. The antibacterial activity was checked by minimum inhibition concentration assay. The HeLa and MCF-7 cancer cell lines were used to explore the cytotoxicity and genotoxicity activity of biogenic MC-AgNPs.

RESULTS

The free radical scavenging potential of MC-AgNPs was studied by in vitro DPPH and ABTS assays, which confirmed significant radical scavenging activity in a dose-dependent manner with IC50 of 17.70 ± 0.36 μg/mL for DPPH and 13.37 ± 3.15 μg/mL for ABTS radicals. The bactericidal effects of MC-AgNPs confirmed by MIC showed 0.1 mg/mL concentration of MC-AgNPs with greater sensitivity for E.coli (93.33 ± 0.89), followed by K. pneumoniae (90.99 ± 0.57), S. aureus (87.26 ± 2.80) and P. aeruginosa strains (44.68 ± 0.73). The cytotoxicity results depicted strong dose and timedependent toxicity of biogenic MC-AgNPs against cancer cell lines fifty percent inhibitory concentration MC-AgNPs against HeLa cells were 13.56 ± 1.22 μg/mL after 24h and 5.57 ± 0.12 μg/mL after 48 h exposure, likewise 16.86 ± 0.88 μg/mL and 11.60 ± 0.97 μg/mL respectively for MCF-7 cells.

CONCLUSIONS

The present study revealed the green synthesis of silver nanoparticles using M. citrifolia and their significant antioxidant, antibacterial and anticancer activities.

Facile construction of irinotecan loaded mesoporous nano-formulation with surface-initiated polymerization to improve stimuli-responsive drug delivery for breast cancer therapy

This work uses rice husk to fabricate mesoporous silica nanoparticles (D-RMN) for breast cancer therapy. The biocompatible dual-responsive (DAN-RMN) was developed by polymerizing acrylic acid (AA) and n-isopropyl acrylamide (NIPAM) on the DV-RMN surface monomeric ratio to increase drug delivery efficiency after vinyl groups were added to the surface of nanoparticles (DAN-RMN). Various analytical and spectroscopical methods characterized the fabricated nanoparticles. Additionally, further encapsulation with SN-38 into the DAN-RMN enhances anticancer efficiency. The in-vitro controlled SN-38 release displayed remarkable temperature and pH response. The MTT assay established the biocompatibility and cytotoxicity of natural sources of silica and DAN-RMN. The fabricated SN-38@DAN-RMN nanoparticles effectively killed the MDA-MB-231 and 4T1 cancerous cells, confirmed by the MTT assay. The IC₅₀ values of SN-38@DAN-RMN in MDA-MB-231 and 4T1 for 1.8 μg/mL and 1.7 μg/mL, respectively. In addition, acridine orange-ethidium bromide (AO-EB) dual staining methods were used to determine morphological changes of cell shrinkage and fragmentation. Nuclear staining methods confirmed the nuclear fragmentation and condensation of the cells. Further, the cell death was examined using dual staining Annexin V-FITC/PI in flow cytometric analyses to assess apoptosis in the MDA-MB-231 and 4T1 cell lines. The apoptotic cell ratio of SN-38@DAN-RMN in MDA-MB-231 and 4T1 for 27.8 and 32.8, respectively. Since there is no drug leakage in the blood while the carrier is in circulation, the DAN-RMN nanocarrier may be used for targeted and stimuli-responsive administration using ultrasound imaging.

Surface modifications of Gold Nanoparticles: Stabilization and Recent Applications in Cancer Therapy

Gold nanoparticles (GNP) are noble metal nanocarriers that have been recently researched upon for pharmaceutical applications, imaging, and diagnosis. These metallic nanocarriers are easy to synthesize using chemical reduction techniques as their surface can be easily modified. Also, the properties of GNP are significantly affected by its size and shape which mandates its stabilization using suitable techniques of surface modification. Over the past decade, research has focused on surface modification of GNP and its stabilization using polymers, polysaccharides, proteins, dendrimers, and phase-stabilizers like gel phase or ionic liquid phase. The use of GNP for pharmaceutical applications requires its surface modification using biocompatible and inert surface modifiers. The stabilizers used, interact with the surface of GNP to provide either electrostatic stabilization or steric stabilization. This review extensively discusses the surface modification techniques for GNP and the related molecular level interactions involved in the same. The influence of various factors like the concentration of stabilizers used their characteristics like chain length and thickness, pH of the surrounding media, etc., on the surface of GNP and resulting to stability have been discussed in detail. Further, this review highlights the recent applications of surface-modified GNP in the management of tumor microenvironment and cancer therapy.