Biomimetic Membrane Supported at a Metal Electrode Surface

Time-resolved electromechanical and conductive behavior of nanostructured bilayers tethered to the surface of the electrode with incorporated channel proteins and peptides

The influence of incorporation of mitochondrial inner membrane potassium channel, and channel-forming peptide - Gramicidin on the ion transport and electromechanical properties of model lipid membranes tethered to gold electrode was electrochemically investigated by chronoamperometric and impedance spectroscopy techniques. In the case of the potassium channel the ion transport properties were modulated with channel-specific inhibitor - ATP-Mg2+ complex, whereas in the case of gramicidin peptide - by replacing potassium with sodium ions. The observed two exponential current-time responses of the systems studied were interpreted in terms of ion penetration and electrostriction of tethered lipid bilayer membrane, and conclusions supported with the experiments on alkanethiol self-assembled monolayers of different alkanethiol chain lengths deposited on gold.

Spectroelectrochemical Studies of CTAB Adsorbed on Gold Surfaces in Perchloric Acid

The behaviour of CTAB adsorbed on polycrystalline gold electrodes has been studied using a combination of spectroelectrochemical methods. The results indicate that the formation of the layer is the consequence of the precipitation of the CTAB micelles on the electrode surface as bromide ions, which stabilize the micelles, are replaced by perchlorate anions. This process leads to the formation of CTA⁺ layers in which perchlorate ions are intercalated, in which the adlayer suffers a continuous rearrangement that leads to the formation of micro-dominions of different types of hydrogen-bonded water populations throughout the adlayer. After prolonged cycling, a stable situation is reached. Under these conditions, water molecules permeate through the adlayer toward the electrode surface at potentials positive of the potential of zero charge, due to the repulsion between the CTA⁺ layer and the positive charge of the electrode.

Potential Distribution across Model Membranes

Membrane models assembled on electrodes are widely used tools to study potential-dependent molecular processes at or in membranes. However, the relationship between the electrode potential and the potential across the membrane is not known. Here we studied lipid bilayers immobilized on mixed self-assembled monolayers (SAM) on Au electrodes. The mixed SAM was composed of thiol derivatives of different chain lengths such that between the islands of the short one, mercaptobenzonitrile (MBN), and the tethered lipid bilayer an aqueous compartment was formed. The nitrile function of MBN, which served as a reporter group for the vibrational Stark effect (VSE), was probed by surface-enhanced infrared absorption spectroscopy to determine the local electric field as a function of the electrode potential for pure MBN, mixed SAM, and the bilayer system. In parallel, we calculated electric fields at the VSE probe by molecular dynamics (MD) simulations for different charge densities on the metal, thereby mimicking electrode potential changes. The agreement with the experiments was very good for the calculations of the pure MBN SAM and only slightly worse for the mixed SAM. The comparison with the experiments also guided the design of the bilayer system in the MD setups, which were selected to calculate the electrode potential dependence of the transmembrane potential, a quantity that is not directly accessible by the experiments. The results agree very well with estimates in previous studies and thus demonstrate that the present combined experimental-theoretical approach is a promising tool for describing potential-dependent processes at biomimetic interfaces.

Surface-Enhanced Infrared Absorption Spectroscopy (SEIRAS) to Probe Interfacial Water in Floating Bilayer Lipid Membranes (fBLMs)

Floating bilayer lipid membranes (fBLMs) immobilized on metallic surfaces provide a convenient model mimicking the cell membranes due to the effective hydration of lipid polar heads in a proximal leaflet and the possibility to generate the potential gradient across the membrane. This chapter describes the protocol for the measurement of interfacial water separating the floating bilayer lipid membrane from the solid support using surface-enhanced infrared absorption spectroscopy (SEIRAS) under electrochemical control.

Interaction of LL-37 human cathelicidin peptide with a model microbial-like lipid membrane

The only representative of cathelicidin peptides in humans is LL-37, a multifunctional antimicrobial peptide (AMP) that is a part of the innate immune response. Details of the LL-37 direct activity against pathogens are not well understood at the molecular level. Here, we present research on the mechanism of interaction between LL-37 and a model multicomponent bilayer lipid membrane (BLM), mimicking microbial cell membrane. Electrochemical impedance spectroscopy (EIS), high-resolution atomic force microscopy (AFM) imaging, and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) were applied to study the peptide influence on a model microbial-like membrane. We show that LL-37 causes changes in the phospholipid molecules conformation and orientation, leading to membrane disintegration, significantly affecting the membrane electrical parameters, such as capacitance and resistance. High-resolution AFM imaging shows topographical and mechanical effects of such disintegration, while PM-IRRAS data indicates that introduction of LL-37 causes changes in the phospholipid acyl chains from all-trans to gauche conformations. Moreover, the presence of LL-37 significantly alters the value of the phospholipid tilt angle. Altogether, our results suggest a "carpet" membrane dissolution followed by a detergent-like membrane disruption mechanism upon LL-37 activity. This research gives a novel insight into the understanding of LL-37 influence on multicomponent model membranes and a promising contribution to the development of LL-37-derived therapeutic agents against drug-resistant bacteria.

Toxicity of selected airborne nitrophenols on eukaryotic cell membrane models

Nitroaromatics belong to the group of toxic components of aerosol particles and atmospheric hydrometeors that enter the atmosphere through biomass burning and fuel combustion. In the present work, we report on the cytotoxic effects of a 2-, 3- and 4-nitrophenol mixture on a model eukaryotic-like cell membrane and compared it with in vitro cellular models BEAS-2B (immortalized bronchial epithelial cells) and A549 (cancerous alveolar epithelial cells). A selected model biomembrane comprised of DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine), DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) was studied. The electrochemical-based method, combined with atomic force microscopy (AFM) and phase-contrast microscopy imaging, allowed to get insights into the mechanism of cellular function disruption caused by airborne nitrophenols. The efficacy of the method is supported by the data obtained from in vitro experiments performed on cell models. The nitrophenol mixture exhibited cytotoxic effects at concentrations above 100 μg mL^-1, as demonstrated by phase-contrast microscopy in real lung cell lines. Electrochemical impedance spectroscopy (EIS) revealed the formation of membrane defects at a nitrophenol concentration of 200 μg mL^-1. AFM imaging confirmed the model membrane disintegration and phospholipids rearrangement in the presence of nitrophenols. These observations indicate that particle-bound nitrophenols induce substantial changes in cell membranes and make them more permeable to aerosol, resulting in major cellular damage in the lungs when inhaled. The study provides initial evidence of cellular membrane damage induced by three important nitrated phenols present in the environment.

Influence of the dimensionality of the periodic boundary conditions on the transport of a drug-peptide complex across model cell membranes

Many research efforts are devoted to improving the efficiency of chemotherapy. One of the aspects is to facilitate the transport of drugs across the cell membranes by attaching the therapeutics to a carrier molecule. The current study focuses on computational investigation of such a system with doxorubicin as the model drug, which is covalently bound to a cell-penetrating peptide. The correct description of its membrane translocation at the molecular level requires proper choice of the model membrane and of the simulation parameters. For the purpose, two phospholipid bilayers are built, one containing solely DPPC and another with mixed lipid content mimicking the composition of a human erythrocyte membrane. Atomistic molecular dynamics simulations are carried out in two types of periodic boundary conditions (2D and 3D PBC), in order to assess the effect of the periodicity dimensionality on the intermolecular interactions. The evolution of some basic characteristics of the bilayers and of the drug-peptide complex is tracked: mass density profiles, electrostatic potentials, lateral diffusion coefficients and areas per lipid, lipid-complex radial distribution functions, secondary structure of the peptide and orientation of the drug relative to the membrane. Thus, the influence of the periodic boundary conditions is quantified and it shows that the mixed system in 3D PBC is the most suitable for analysis of the translocation of the transporting moiety across cell membranes.

Water Structure in the Submembrane Region of a Floating Lipid Bilayer: The Effect of an Ion Channel Formation and the Channel Blocker

The structure of water in the submembrane region of the bilayer of DPhPC floating (fBLM) on a monolayer of 1-thio-β-d-glucose (β-Tg)-modified gold nanoparticle film was studied by the surface-enhanced infrared absorption spectroscopy (SEIRAS). SEIRAS employs surface enhancement of the mean square electric field of the photon, which is acting on a few molecular layers above the film of gold nanoparticles. Therefore, it is uniquely suited to probe water molecules in the submembrane region and provides unique information concerning the structure of the hydrogen bond network of water surrounding the lipid bilayer. The IR spectra indicated that water with a strong hydrogen network is separating the membrane from the gold surface. This water is more ordered than the water in the bulk. When alamethicin, a peptide forming ion channels, is inserted into the membrane, the network is only slightly loosened. The addition of amiloride, an ion channel blocker, results in a significant decrease in the amount of water in the submembrane region. The remaining water has a significantly distorted hydrogen bond network. This study provides unique information about the effect of the ion channel on water transport across the bilayer. The electrode potential has a relatively small effect on water structure in the submembrane region. However, the IR studies demonstrated that water is less ordered at positive transmembrane potentials. The present results provide significant insight into the nature of hydration of a floating lipid bilayer on the gold electrode surface.

Impact of the protein myristoylation on the structure of a model cell membrane in a protein bound state

The neuronal calcium sensor protein recoverin is expressed in retinal rod and cone cells and is involved in the calcium-dependent control of receptor (rhodopsin) phosphorylation and receptor inactivation. In its Ca²⁺-saturated form recoverin is attached to membranes by an exposed myristoyl group and responds to oscillating changes of intracellular Ca²⁺-concentration by performing a so-called Ca²⁺-myristoyl switch. In this work we analyze changes in a liquid lipid bilayer interacting with myristoylated and non-myristoylated recoverin by employing polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) with electrochemical control. The lipid bilayer is transferred onto a polycrystalline gold electrode using Langmuir-Blodgett Langmuir-Schaefer transfer at the surface pressure π = 30 mN m^-1 which ensures, necessary for the lipid-protein interaction, liquid state of the hydrocarbon chains of phospholipids. The model lipid bilayers are adsorbed directly on the Au electrode surface at transmembrane potentials -0.2 < ∆ϕM|S < 0.25 V. The interaction with recoverin leads to a stabilization of the adsorbed state of the lipid bilayer at positive transmembrane potentials. The interaction leads to a decrease in the surface charge density that accumulates on the membrane covered electrode surface, indicating changes in the lateral interactions in the lipid membrane. In situ spectroelectrochemical studies confirm orientation changes in the hydrophobic environment of the model membrane. Insertion of the myristoyl group of recoverin into the membrane is connected with an increase in the tilt of the hydrocarbon chains with respect to the surface normal and decrease in the bilayer thickness. Potential-induced pore formation and desorption of the lipid bilayer from the membrane surface is accompanied by the removal of the acyl chains of recoverin from the membrane.