MRI Safety and Neuromodulation Systems

An optoelectronic implantable neurostimulation platform allowing full MRI safety and optical sensing and communication

A novel programmable implantable neurostimulation platform based on photonic power transfer has been developed for various clinical applications with the main focus of being safe to use with MRI scanners. The wires usually conveying electrical current from the neurostimulator to the electrodes are replaced by optical fibers. Photovoltaic cells at the tip of the fibers convert laser light to biphasic electrical impulses together with feedback signals with 54% efficiency. Furthermore, a biocompatible, implantable and ultra-flexible optical lead was developed including custom optical fibers. The neurostimulator platform incorporates advanced signal processing and optical physiological sensing capabilities thanks to a hermetically sealed transparent nonmetallic casing. Skin transparency also allowed the development of a high-speed optical transcutaneous communication channel. This implantable neurostimulation platform was first adapted to a vagus nerve stimulator for the treatment of epilepsy. This neurostimulator has been designed to fulfill the requirements of a class III long-term implantable medical device. It has been proven compliant with standard ISO/TS10974 for 1.5 T and 3 T MRI scanners. The device poses no related threat and patients can safely undergo MRI without specific or additional precautions. Especially, the RF induced heating near the implant remains below 2 °C whatever the MRI settings used. The main features of this unique advanced neurostimulator and its architecture are presented. Its functional performance is evaluated, and results are described with a focus on optoelectronics aspects and MRI safety.

Evaluation of MRI Issues for a New Wirelessly Powered, Spinal Cord Stimulation Lead With Receiver

OBJECTIVE. MRI is an imaging modality frequently ordered for patients with neuromodulation systems implanted for spinal cord stimulation. The purpose of this investigation was to evaluate MRI safety issues (magnetic field interactions, MRI-related heating, functional disturbances, and artifacts) for a new wirelessly powered lead with receiver used for SCS. MATERIALS AND METHODS. Lead samples underwent in vitro evaluation for MRI safety issues using standardized techniques. Magnetic field interactions (i.e., translational attraction and torque) and artifacts were tested at 3 T. MRI-related heating was performed at 1.5 T/64 MHz and 3 T/128 MHz using two different methods: numerical simulations with analytical modeling and physical testing. Possible functional disturbances were evaluated under exposures to 1.5-T/64-MHz and 3-T/128-MHz MRI conditions. RESULTS. The lead exhibited minor magnetic field interactions (22° deflection angle, no torque) at 3 T. The highest temperature change recorded at 1.5 T/64 MHz and 3 T/128 MHz was 3.8°C and 11.3°C, respectively. Exposures to MRI conditions did not damage or alter the functional aspects of the leads. The maximum artifact size seen on a gradient-echo pulse sequence extended approximately 10 mm relative to the size of the lead. CONCLUSION. The MRI tests performed on patients with the new lead with receiver revealed no substantial concerns with respect to the conditions that we provide in the safety guidelines that were based on the results of this investigation. Therefore, MRI examinations will result in acceptable heating when conducted at appropriate whole-body-averaged specific absorption rate levels (i.e., 2.0 W/kg at 1.5 T/64 MHz and 0.3 W/kg at 3 T/128 MHz, corresponding to adjusted temperature rises of 3.6°C and 1.2°C, respectively). Therefore, patients with this wirelessly powered lead and receiver implanted can safely undergo MRI examinations under specific conditions.