Processing of Biomass with Hydrothermal and Supercritical Water

Analysis of Single-Step Pretreatments for Lignocellulosic Platform Isolation as the Basis of Biorefinery Design

Biorefinery feasibility is highly influenced by the early design of the best feedstock transformation pathway to obtain value-added products. Pretreatment has been identified as the critical stage in biorefinery design since proper pretreatment influences subsequent reaction, separation, and purification processes. However, many pretreatment analyses have focused on preserving and valorizing six-carbon sugars for future use in bioconversion processes, leaving aside fractions such as hemicellulose and lignin. To date, there has been no pretreatment systematization for the removal of lignocellulosic fractions. This work defines pretreatment efficacy through operational, economic, environmental, and social indicators. Thus, using the data reported in the literature, as well as the results of the simulation schemes, a multi-criteria weighting of the best-performing schemes for the isolation or removal of cellulose, hemicellulose, and lignin was carried out. As a main result, it was concluded that dilute acid is the most effective for cellulose isolation and hemicellulose removal for producing platform products based on six- and five-carbon sugars, respectively. Additionally, the kraft process is the best methodology for lignin removal and its future use in biorefineries. The results of this work help to elucidate a methodological systematization of the pretreatment efficacy in the design of biorefineries as an early feasibility stage considering sustainability aspects.

Arabinan saccharification by biogas reactor metagenome-derived arabinosyl hydrolases

BACKGROUND

Plant cell walls represent the most plentiful renewable organic resource on earth, but due to their heterogeneity, complex structure and partial recalcitrance, their use as biotechnological feedstock is still limited.

RESULTS

In order to identify efficient enzymes for polysaccharide breakdown, we have carried out functional screening of metagenomic fosmid libraries from biogas fermenter microbial communities grown on sugar beet pulp, an arabinan-rich agricultural residue, or other sources containing microbes that efficiently depolymerize polysaccharides, using CPH (chromogenic polysaccharide hydrogel) or ICB (insoluble chromogenic biomass) labeled polysaccharide substrates. Seventy-one depolymerase-encoding genes were identified from 55 active fosmid clones by using Illumina and Sanger sequencing and dbCAN CAZyme (carbohydrate-active enzyme) annotation. An around 56 kb assembled DNA fragment putatively originating from Xylanivirga thermophila strain or a close relative was analyzed in detail. It contained 48 ORFs (open reading frames), of which 31 were assigned to sugar metabolism. Interestingly, a large number of genes for enzymes putatively involved in degradation and utilization of arabinose-containing carbohydrates were found. Seven putative arabinosyl hydrolases from this DNA fragment belonging to glycoside hydrolase (GH) families GH51 and GH43 were biochemically characterized, revealing two with endo-arabinanase activity and four with exo-α-L-arabinofuranosidase activity but with complementary cleavage properties. These enzymes were found to act synergistically and can completely hydrolyze SBA (sugar beet arabinan) and DA (debranched arabinan).

CONCLUSIONS

We screened 32,776 fosmid clones from several metagenomic libraries with chromogenic lignocellulosic substrates for functional enzymes to advance the understanding about the saccharification of recalcitrant lignocellulose. Seven putative X. thermophila arabinosyl hydrolases were characterized for pectic substrate degradation. The arabinosyl hydrolases displayed maximum activity and significant long-term stability around 50 °C. The enzyme cocktails composed in this study fully degraded the arabinan substrates and thus could serve for arabinose production in food and biofuel industries.

Oil Palm Empty Fruit Bunch (OPEFB) Fiber-Reinforced Acrylic Thermoplastic Composites: Effect of Salt Fog Aging on Tensile, Spectrophotometric, and Thermogravimetric Properties

The prioritization of agroindustry fiber wastes as raw materials in development of composites has become a challenge to obtain higher value-added products with targeted applications. In this study, natural fiber-reinforced polymer matrix composites were elaborated using two fiber sizes (605 μm and 633 μm) of oil palm empty fruit bunch (OPEFB) and acrylic thermoplastic resin. In doing so, resin and fibers were mixed at room temperature by maintaining filler content of 42 wt. % for all formulations. In addition, thermomechanical compression moulding was used as composite manufacturing process at four processing temperatures (80, 100, 120, and 140°C). All formulations were subsequently exposed to salt fog spray aging for 330 hours. The effects of accelerated aging process on mechanical, spectrophotometric, and thermogravimetric characteristics were studied. On the whole, results have shown feasibility to use a facile method to elaborate composites based on waterborne acrylic matrix and OPEFB fibers. After salt spray testing, it was observed detectable levels of Aspergillus spp. of fungi in all samples, as a result of phylogenetic organization of microbial activity. Tensile behavior of composites was significantly influenced by processing temperature and fiber size. In broad terms, their overall mechanical properties were improved by the increase of temperature. Additionally, infrared spectroscopy results showed important bands mainly associated to biodegradation of cellulose, hemicellulose, and lignin. On the other hand, two degradation stages were mainly identified in thermogravimetric evaluation. Noteworthy, aging had no significant effect on the thermal properties of composites.

Mixotrophic cultivation of isolated Messastrum gracile SVMIICT7: Photosynthetic response and product profiling

The isolated Messastrum gracile SVMIICT7 was mixotrophically cultivated in flat panel photobioreactor (FP-PBR) towards understanding the photosynthetic transient and product profile. Biomass productivity attained a maximum of 45 mg L^-1d^-1, with COD, nitrate and phosphate removal of 83.3%, 84.05%, and 74.98% respectively. Messastrum sp. showed good assimilation of proteins (124 mg g^-1) (w/w), carbohydrates (119 mg g^-1) (w/w) and lipids (26%) (w/w). The myristoleic acid (C14:1-39.1%) and heptadecanoic acid (C17:0-29.1%) are abundant fatty acids with therapeutic, food and feed applications. The cellular ultrastructure studies revealed facile arrangement of chloroplast and starch covered pyrenoids supporting increased carbohydrate accumulation. Photosystem II (PSII) [Y(II), ETR(II), Y(NPQ), and Y(NO)] and photosystem I (PSI) [Y(I), ETR(I), Y(NA), and Y(ND)] transients showed improved photosynthetic efficiency directing microalgae growth and biomass productivity. Higher Fv/Fm values indicates relatively good water splitting and carbon fixation at PSII and PSI facilitating improved photosynthetic electron transport and synthesis of value-added products thereby enabling bioeconomy.

Hybridization of MMT/Lignocellulosic Fiber Reinforced Polymer Nanocomposites for Structural Applications: A Review

In the recent past, significant research effort has been dedicated to examining the usage of nanomaterials hybridized with lignocellulosic fibers as reinforcement in the fabrication of polymer nanocomposites. The introduction of nanoparticles like montmorillonite (MMT) nanoclay was found to increase the strength, modulus of elasticity and stiffness of composites and provide thermal stability. The resulting composite materials has figured prominently in research and development efforts devoted to nanocomposites and are often used as strengthening agents, especially for structural applications. The distinct properties of MMT, namely its hydrophilicity, as well as high strength, high aspect ratio and high modulus, aids in the dispersion of this inorganic crystalline layer in water-soluble polymers. The ability of MMT nanoclay to intercalate into the interlayer space of monomers and polymers is used, followed by the exfoliation of filler particles into monolayers of nanoscale particles. The present review article intends to provide a general overview of the features of the structure, chemical composition, and properties of MMT nanoclay and lignocellulosic fibers. Some of the techniques used for obtaining polymer nanocomposites based on lignocellulosic fibers and MMT nanoclay are described: (i) conventional, (ii) intercalation, (iii) melt intercalation, and (iv) in situ polymerization methods. This review also comprehensively discusses the mechanical, thermal, and flame retardancy properties of MMT-based polymer nanocomposites. The valuable properties of MMT nanoclay and lignocellulose fibers allow us to expand the possibilities of using polymer nanocomposites in various advanced industrial applications.

Dynamics of Fusarium Mycotoxins and Lytic Enzymes during Pea Plants' Infection

Fusarium species are common plant pathogens that cause several important diseases. They produce a wide range of secondary metabolites, among which mycotoxins and extracellular cell wall-degrading enzymes (CWDEs) contribute to weakening and invading the host plant successfully. Two species of Fusarium isolated from peas were monitored for their expression profile of three cell wall-degrading enzyme coding genes upon culturing with extracts from resistant (Sokolik) and susceptible (Santana) pea cultivars. The extracts from Santana induced a sudden increase in the gene expression, whereas Sokolik elicited a reduced expression. The coherent observation was that the biochemical profile of the host plant plays a major role in regulating the fungal gene expression. In order to uncover the fungal characteristics in planta, both pea cultivars were infected with two strains each of F. proliferatum and F. oxysporum on the 30th day of growth. The enzyme activity assays from both roots and rhizosphere indicated that more enzymes were used for degrading the cell wall of the resistant host compared to the susceptible host. The most commonly produced enzymes were cellulase, β-glucosidase, xylanase, pectinase and lipase, where the pathogen selectively degraded the components of both the primary and secondary cell walls. The levels of beauvericin accumulated in the infected roots of both cultivars were also monitored. There was a difference between the levels of beauvericin accumulated in both the cultivars, where the susceptible cultivar had more beauvericin than the resistant one, showing that the plants susceptible to the pathogen were also susceptible to the toxin accumulation.

Lignocellulosic crop residue composting by cellulolytic nitrogen-fixing bacteria: A novel tool for environmental sustainability

Lignocellulosic crop residue (LCCR) composting is a cost-effective and sustainable approach for addressing environmental pollution associated with open biomass burning and application of chemical fertilizers in agriculture. The value-added bio-product of the composting process contributes to the improvement of the soil properties and plant growth in an environment-friendly way. However, the conventional process employed for composting LCCRs is slow and becomes an impediment for farmers who plant two or three crops a year. This concern has led to the development of different techniques for rapid composting of LCCRs. The use of cellulolytic nitrogen-fixing microorganisms for composting has emerged as a promising method for enhancing LCCR composting and quality of the compost. Therefore, this review addresses the recent progress on the potential use of cellulolytic nitrogen-fixing bacteria (CNFB) for LCCR composting and discusses various applications of nutrient-rich compost for sustainable agriculture to increase crop yields in a nature-friendly way. This knowledge of bacteria with both cellulose-degrading and nitrogen-fixing activities is significant with respect to rapid composting, soil fertility, plant growth and sustainable management of the lignocellulosic agricultural waste and it provides a means for the development of new technology for sustainability.

Pretreatment Processes of Biomass for Biorefineries: Current Status and Prospects

This article seeks to be a handy document for the academy and the industry to get quickly up to speed on the current status and prospects of biomass pretreatment for biorefineries. It is divided into two biomass sources: vegetal and animal. Vegetal biomass is the material produced by plants on land or in water (algae), consuming sunlight, CO2, water, and soil nutrients. This includes residues or main products from, for example, intensive grass crops, forestry, and industrial and agricultural activities. Animal biomass is the residual biomass generated from the production of food from animals (e.g., manure and whey). This review does not mean to include every technology in the area, but it does evaluate physical pretreatments, microwave-assisted extraction, and water treatments for vegetal biomass. A general review is given for animal biomass based in physical, chemical, and biological pretreatments.