Selective hydrogenation of polyunsaturated hydrocarbons and unsaturated aldehydes over bimetallic catalysts

Estudio teórico de la oxidación de CO con O2 usando catalizadores de Au-Pd y Au-Pt

En el presente estudio se realizaron cálculos con base en la Teoría del Funcional de la Densidad Electrónica (DFT) con la aproximación B3PW91/LANL2DZ para optimizar los sistemas monometálicos y bimetálicos Au9, Au8Pd, Au8Pt, AuPd8, AuPt8, Pd9 y Pt9. Los materiales fueron teóricamente evaluados como catalizadores para la oxidación de monóxido de carbono (CO) y se determinó el sistema más favorable para la adsorción de esta molécula. La sustitución de átomos de Pt y Pd por átomos de Au en los nonámeros generó un cambio en la estructura tridimensional del sistema. El análisis de reactividad global mostró que el clúster más reactivo es 𝑃𝑡9, seguido por 𝐴𝑢𝑃𝑡8. Los índices de Fukui identificaron los sitios más susceptibles para un ataque nucleofílico de ambos clústeres. La adsorción de CO generó una cascada de oxidación que liberó ~4,5 eV, indicando que la reacción es altamente exotérmica y exergónica. Los clústeres 𝐴𝑢𝑃𝑡8 y 𝑃𝑡9 mostraron los valores más bajos de energía de activación de la etapa determinante del mecanismo. En general, la sustitución de un átomo de platino (o paladio) por un átomo de oro no afecta la reactividad de los nonámeros y, por tanto, se infiere que el clúster 𝐴𝑢𝑃𝑡8 podría ser un catalizador promisorio en la oxidación de CO.

Host-induced alteration of the neighbors of single platinum atoms enables selective and stable hydrogenation of butadiene

Tuning the coordination neighbors of the metal center is emerging as an elegant approach to manipulating the performance of supported single-atom catalysts in heterogeneous catalysis. Herein, atomically dispersed Pt species with different coordination neighbors hosted on nitrogen-doped carbon (NC) and graphitic carbon nitride (C₃N₄) are constructed through an impregnation-activation approach. Advanced characterization techniques including X-ray electron microscopy, X-ray absorption spectroscopy, and high angle annular dark-field scanning transmission electron microscopy reveal the different nature of active sites induced by the hosts: i.e., the Pt-N_x configuration in NC but both Pt-N and Pt-O coordinations in C₃N₄. H₂-D₂ exchange experiments and electron microscopy further evidence that Pt/NC exhibits a high propensity for H₂ splitting and high thermal stability of the Pt species against agglomeration, whereas Pt/C₃N₄ cannot dissociate H₂ and the Pt atoms easily aggregate in the reductive stream. Consequently, when applied in the selective hydrogenation of 1,3-butadiene, Pt/NC exhibits higher selectivity to butenes and excellent stability, but Pt/C₃N₄ behaves as a nanoparticle analogue favoring deep hydrogenation. The superior selectivity patterns of the single Pt atoms over Pt nanoparticles are rationalized by the inversed adsorption strength between the H₂ and 1,3-butadiene molecules at different metal sites, which is substantiated by the kinetic studies.

Highly Enhanced Catalytic Stability of Copper by the Synergistic Effect of Porous Hierarchy and Alloying for Selective Hydrogenation Reaction

Supported copper has a great potential for replacing the commercial palladium-based catalysts in the field of selective alkynes/alkadienes hydrogenation due to its excellent alkene selectivity and relatively high activity. However, fatally, it has a low catalytic stability owing to the rapid oligomerization of alkenes on the copper surface. In this study, 2.5 wt% Cu catalysts with various Cu:Zn ratios and supported on hierarchically porous alumina (HA) were designed and synthesized by deposition–precipitation with urea. Macropores (with diameters of 1 μm) and mesopores (with diameters of 3.5 nm) were introduced by the hydrolysis of metal alkoxides. After in situ activation at 350 °C, the catalytic stability of Cu was highly enhanced, with a limited effect on the catalytic activity and alkene selectivity. The time needed for losing 10% butadiene conversion for Cu1Zn3/HA was ~40 h, which is 20 times higher than that found for Cu/HA (~2 h), and 160 times higher than that found for Cu/bulky alumina (0.25 h). It was found that this type of enhancement in catalytic stability was mainly due to the rapid mass transportation in hierarchically porous structure (i.e., four times higher than that in bulky commercial alumina) and the well-dispersed copper active site modified by Zn, with identification by STEM–HAADF coupled with EDX. This study offers a universal way to optimize the catalytic stability of selective hydrogenation reactions.

Facile Redox Synthesis of Novel Bimetallic Crn+/Pd0 Nanoparticles Supported on SiO2 and TiO2 for Catalytic Selective Hydrogenation with Molecular Hydrogen

The bimetallic Crn+/Pd0 nanoparticles have been synthesized for the first time by a two-step redox method. The method includes the deposition of Pd0 nanoparticles on the surface of SiO2 and TiO2 carriers followed by the deposition of Crn+ on the surface of Pd0 nanoparticles using the redox procedures, which are based on the catalytic reduction of Crn+ with H2 in aqueous suspensions at ambient conditions. Transmission (TEM) and scanning (SEM) electron microscopy, X-ray photoelectron spectroscopy (XPS), Fourie-transformed infrared spectroscopy of adsorbed CO (FTIR-CO), and CO chemisorption studies were performed to characterize the morphology, nanoparticle size, element, and particle distribution, as well as the electronic state of deposited metals in the obtained catalysts. A decrease in nanoparticle size from 22 nm (Pd/SiO2) to 2–6 nm (Pd/TiO2) makes possible deposition of up to 1.1 wt.% Cr most likely as Cr3+. The deposition of CrOx species on the surface of Pd nanoparticles was confirmed using FTIR of adsorbed CO and the method of temperature-programmed reduction with hydrogen (TPR-H2). The intensive hydrogen consumption in the temperature ranges from −50 °C to 40 °C (Cr/Pd/SiO2) and from −90 °C to −40 °C (Cr/Pd/TiO2) was first observed for the supported Pd catalysts. The decrease in the temperature of β-PdHx decomposition indicates the strong interaction between the deposited Crn+ species and Pd0 nanoparticle after reduction with H2 at 500 °C. The novel Crn+/Pd/TiO2 catalysts demonstrated a considerably higher activity in selective hydrogenation of phenylacetylene than the Pd/TiO2 catalyst at ambient conditions.