Green Analytical Chemistry

Simultaneous Determination of Multiple Contaminants in Chicken Liver Using Dispersive Liquid-Liquid Microextraction (DLLME) Detected by LC-HRMS/MS

Simultaneous determination of a mixture of food contaminants, including pesticides, sulphonamides, fluoroquinolones, anthelmintics, and aflatoxin B1, in solid biological samples (chicken liver) by dispersive liquid-liquid microextraction/liquid chromatography-high resolution mass spectrometry (DLLME/LC-HRMS) is presented. Previous work focused on the application of DLLME to single-class contaminants. In this work, the DLLME extraction method has been extended to complex multiresidues in the biological matrix. The first part of this study was the selection of an appropriate solvent that enabled the dissolution of analytes from the chicken livers. The matrix-matched calibration curves showed good linearity in the range 0.5-50.0 µg kg^-1 for aflatoxin B1 and 50-500 µg kg^-1 for pesticides, fluoroquinolones, sulphonamides, and anthelmintics, with a coefficient of determination (R²) values of 0.9916-0.9967. The mean recoveries were in the range of 80.4-96.3%, and the relative standard deviation (RSD) values were in the range of 1.53-8.98%. The limit of detection (LOD) and the limit of quantification (LOQ) values were 0.03 µg kg^-1 and 0.09 µg kg^-1, respectively, for aflatoxin B1, and for pesticides, fluoroquinolones, sulphonamides, and anthelmintics, they were in the range of 0.011-1.197 µg kg^-1 and 0.150-2.579 µg kg^-1, respectively. The developed method was compared with the standard solid phase extraction (SPE) method, and there was no significant difference between the two methods.

Carbon fibers as green and sustainable sorbent for the extraction of isoflavones from environmental waters

Isoflavones are a group of phytoestrogens of important environmental concern due to their endocrine disrupting effects. This article presents a rapid, green, and sustainable method for determining four isoflavones (daidzein, genistein, formononetin, and biochanin A) in environmental waters complying with current trends in Analytical Chemistry. The method consists of in-syringe dispersive solid-phase extraction (DSPE) as the extraction approach, using carbon fibers as extraction material. The synthesis of carbon fibers is simple and sustainable, since it only requires a natural product such as raw cotton as precursor, which is thermally treated (600 °C for 30 min) in an inert (Ar) atmosphere to convert it into carbon fibers. After extraction, the final eluate is analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The proposed methodology allows the determination of the four isoflavones in water samples at the ng L^-1 range, with limits of detection in the range from 17 to 25 ng L^-1, relative standard deviations (RSD) from 2.8 to 10.1%, and good batch-to-batch repeatability (RSD < 13%). The method was finally applied to six environmental water samples from different sources and two swimming pool waters, and concentrations of all analytes up to 490 ng L^-1 were found. The highest concentrations were found in those samples close to crop fields. Relative recovery values (80-121%) showed that the aqueous matrices considered in this work did not significantly affect the extraction process. This method overcomes the drawbacks of the previous works with the same purpose, such as consuming large volumes of organic solvents or prolonged extraction times. Moreover, this procedure would allow the extraction stage to be carried out in situ, since only the sorbent material (previously synthesized in the laboratory) and disposable syringes are required.

Assessment of bioavailability and mobility of major and trace elements in agricultural soils collected in Port St Johns, Eastern Cape, South Africa using single extraction procedures and pseudo-total digestion

PURPOSE

The aim of this study was to evaluate the applicability of ultrasound assisted single extraction and pseudo-total digestion procedures to investigate the bioavailability and mobility of major and trace elements collected from agricultural soil collected in Mzimvubu farmstead area located in Port St Johns, Eastern Cape Province (South Africa).

MATERIALS AND METHODS

The potential metal availability was assessed using complexing agent (ethylenediaminetetraacetic acid (EDTA)), mild (cacium chloride (CaCl2) and ammonium nitrate (NH4NO3)), deionized water and acidic (CH3COOH) extractants with the assistance of ultrasound to evaluate mobility and bioavailability of metals. The ultrasound radiation was used to assist the single extraction of major and trace metals from agricultural soils as well shortening the extraction time. The pseudo-total metal content in agricultural soils was obtained using pseudo-total digestion employing aqua-regia.

RESULTS AND DISCUSSION

The results obtained using different solvents for single extraction procedures, revealed that higher extraction of Al (256-681 mg kg-1), Fe (172-430 mg kg-1) and Mn (35-136 mg kg-1), was observed compared to other metals. Among the investigated solvents, deionized water, acetic acid and EDTA proved to be the most aggressive extractants. The geo-accumulation index (2-6) and contamination factor (3-6) demonstrated that Fe, Cr, Mn, Co, Cu, Ni, and Zn could pose significant environmental contamination risk.

CONCLUSIONS

Based on the results obtained, it can be concluded that the high levels of some studied metals was due to anthropogenic activities.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-020-00581-x.