Stabilization of phytase on multi-walled carbon nanotubes via covalent immobilization

Effective mitigation in the amount of acrylamide through enzymatic approaches

Acrylamide (AA), as a food-borne toxicant, is created at some stages of thermal processing in the starchy food through Maillard reaction, fatty food via acrolein route, and proteinous food using free amino acids pathway. Maillard reaction obviously takes place in thermal-based products, being responsible for specific sensory attributes; AA formation, thereby, is unavoidable during the thermal processing. Additionally, AA can naturally occur in soil and water supply. In order to reduce the levels of acrylamide in cooked foods, mitigation techniques can be separated into three different types. Firstly, starting materials low in acrylamide precursors can be used to reduce the acrylamide in the final product. Secondly, process conditions may be modified in order to decrease the amount of acrylamide formation. Thirdly, post-process intervention could be used to reduce acrylamide. Conventional or emerging mitigation techniques might negatively influence the pleasant features of heated foods. The current study summarizes the effect of enzymatic reaction induced by asparaginase, glucose oxidase, acrylamidase, phytase, amylase, and protease to possibly inhibit AA formation or progressively hydrolyze formed AA. Not only enzyme-assisted AA reduction could dramatically maintain bio-active compounds, but also no damaging impact has been reported on the sensorial and rheological properties of the final heated products. The enzyme engineering can be applied to ameliorate enzyme functionality through altering the amino acid sequence like site-specific mutagenesis and directed evolution, chemical modifications by covalent conjugation of L-asparaginase onto soluble/insoluble biocompatible polymers and immobilization. Moreover, it would be possible to improve the enzyme's physical, chemical, and thermal stability, recyclability and prevent enzyme overuse by applying engineered ones. In spite of enzymes' cost-effective and eco-friendly, promoting their large-scale usages for AA reduction in food application and AA bioremediation in wastewater and soil resources.

Advances in immobilization of phytases and their application

The review describes the advances in the phytase immobilization for the past decade and their biotechnological applications. Different approaches for phytase immobilization are described including the process using organic and inorganic matrices and microbial cells, as well as nanostructures of various nature. Moreover, the immobilization of phytase-producing microbial cells and the use of cross-linked phytase aggregates have been under consideration. A detailed classification of various carriers for immobilization of phytases and the possibility of their applications are presented. A particular attention is drawn to a breakthrough approach of biotechnological significance to the design of microencapsulation of bacterial phytase from Obesumbacterium proteus in the recombinant extremophile of Yarrowia lipolytica.

Immobilized phytases: an overview of different strategies, support material, and their applications in improving food and feed nutrition

Phytases are the most widely used food and feed enzymes, which aid in nutritional improvement by reducing anti-nutritional factor. Despite the benefits, enzymes usage in the industry is restricted by several factors such as their short life-span and poor reusability, which result in high costs for large-scale utilization at commercial scale. Furthermore, under pelleting conditions such as high temperatures, pH, and other factors, the enzyme becomes inactive due to lesser stability. Immobilization of phytases has been suggested as a way to overcome these limitations with improved performance. Matrices used to immobilize phytases include inorganic (Hydroxypatite, zeolite, and silica), organic (Polyacrylamide, epoxy resins, alginate, chitosan, and starch agar), soluble matrix (Polyvinyl alcohol), and nanomaterials including nanoparticles, nanofibers, nanotubes. Several surface analysis methods, including thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and FTIR analysis, have been used to characterize immobilized phytase. Immobilized phytases have been used in a broad range of biotechnological applications such as animal feed, biodegradation of food phytates, preparations of myo-inositol phosphates, and sulfoxidation by vanadate-substituted peroxidase. This article provides information on different matrices used for phytase immobilization from the last two decades, including the process of immobilization and support material, surface analysis techniques, and multifarious biotechnological applications of the immobilized phytases.

Evaluation and Characterization of Tamarind Gum Polysaccharide: The Biopolymer

Polymers from natural sources are widely used as excipients in the formulation of pharmaceutical dosage forms. The objective of this study was to extract and further characterize the tamarind gum polysaccharide (TGP) obtained from Tamarindus indica as an excipient for biomedical applications. Double distilled water was used as a solvent for the extraction of gum while Ethyl alcohol was used as an antisolvent for the precipitation. The results of the Hausner ratio, Carr’s index and angle of repose were found to be 0.94, 6.25, and 0.14, respectively, which revealed that the powder is free-flowing with good flowability. The gum was investigated for purity by carrying out chemical tests for different phytochemical constituents and only carbohydrates were found to be present. The swelling index was found to be 87 ± 1%, which shows that TGP has good water intake capacity. The pH of the 1% gum solution was found to be neutral, approximately 6.70 ± 0.01. The ash values such as total ash, sulphated ash, acid insoluble ash, and water-soluble ash were found to be 14.00 ± 1.00%, 13.00 ± 0.05%, 14.04 ± 0.57% and 7.29 ± 0.06%, respectively. The IR spectra confirmed the presence of alcohol, amines, ketones, anhydrides groups. The contact angle was <90°, indicating favorable wetting and good spreading of liquid over the surface The scanning electron micrograph (SEM) revealed that the particle is spherical in shape and irregular. DSC analysis shows a sharp exothermic peak at 350 °C that shows its crystalline nature. The results of the evaluated properties showed that TGP has acceptable properties and can be used as a excipient to formulate dosage forms for biomedical applications.

Review of the beneficial and anti-nutritional qualities of phytic acid, and procedures for removing it from food products

Phytic acid (PA) is the primary phosphorus reserve in cereals and legumes which serves the biosynthesis needs of growing tissues during germination. It is generally considered to be an anti-nutritional factor found in grains because it can bind to minerals, proteins, and starch, limiting their bioavailability. However, this same mineral binding property can also confer a number of health benefits such as reducing the risk of certain cancers, supporting heart health, and managing renal stones. In addition, the ability of PA to bind minerals allows it to be used in certain food quality applications such as stabilizing the green color of vegetables, preventing lipid peroxidation, and reducing enzymatic browning in fruits/vegetables. These beneficial properties create a potential for added-value applications in the utilization of PA in many new areas. Many possible processing techniques for the preparation of raw materials in the food industry can be used to reduce the concentration of PA in foods to mitigate its anti-nutritional effects. In turn, the recovered PA by-products could be available for novel uses. In this review, a general overview of the beneficial and anti-nutritional effects of PA will be discussed and then dephytinization methods will be explained.