Prasugrel Hydrochloride

Development of Analytical Methods for the Determination of N-Bromosuccinimide in Different Active Pharmaceutical Ingredients by High-Performance Ion Chromatography with Suppressed Conductivity Detection

Product safety is important for medicines. For drugs on the market, it must be demonstrated that the levels of toxic contaminants are below the permitted limits. These impurities are used as reagents or are generated during synthesis. N-bromosuccinimide is used as a brominating agent in the synthesis of some active pharmaceutical ingredients. The determination of N-bromosuccinimide is difficult due to its high reactivity. In this work, a high-performance ion chromatographic method was developed for the determination of N-bromosuccinimide. The ion chromatographic measurement can be performed in two ways, one involves the assay of the resulting bromide ion and the other is via the assay of the 3-carbamoyl propanoic acid ion produced from the succinimide. Both acid ions were analyzed on an anion exchange column by gradient elution with potassium hydroxide eluent and detection was performed by a suppressed conductivity detector. During the method development, the results showed that the measurement of bromide ion was more selective than the measurement of 3-carbamoyl propanoic acid ion. Two different types of active pharmaceutical ingredients (API), i.e., prasugrel and favipiravir, were chosen to test the developed method and sample preparation. For both APIs, sample preparation was performed in a vial and consists of liquid–liquid extraction with an alkaline reagent. Finally, the anion exchange ion chromatography method was validated at the limit value level, and harmonized with the guidelines. For prasugrel, the quantification limits and the accuracy at the limit level are 7.2 ppm and 96.4%, while for favipiravir these are 7.5 ppm and 114.7%, respectively.

Solid self nano-emulsifying system for the enhancement of dissolution and bioavailability of Prasugrel HCl: in vitro and in vivo studies

Prasugrel Hydrochloride (PHCl) is an antiplatelet drug. It is a class II drug with variable bioavailability. The objective of this work was to enhance the solubility and hence the bioavailability and efficacy of PHCl. A Self Nano-Emulsifying Drug Delivery System (SNEDDS) was prepared using Kolliphor El, Maisine 35-1, and Transcutol P as surfactant, oil, and co-surfactant, respectively in a ratio 10:72:18 v/v%. The SNEDDS was converted into solid by adsorption onto Neusilin. In vitro release of the drug from SNEDDS in (pH = 4) at 37 °C and 75 rpm for 45 min was studied. The results were compared to those from the unprocessed PHCl and Lexar^® (the commercial drug). In-vivo studies (platelet Aggregation and bleeding time) were conducted using rats as animal models. It was found that the particle size of the SNEDDS ranged between 80 and 155 nm and EE% was in the range of 90.2% ± 0.4. The release from SNEDDS was about 84% compared to around 25% from unprocessed PHCl and 65% from Lexar^® after 15 min. The platelet aggregation of the formula was lower than the PHCl, and Lexar^® indicating higher bioavailability. In conclusion, SNEDDS with high EE% was prepared and was successful in enhancing the solubility, dissolution rate, and the bioavailability.