Morphofunctional aspects of dental implants

Advancements in dental implantology: The alveolar ridge split technique for enhanced osseointegration

The alveolar ridge split (ARS) technique is a pivotal advancement in dental implantology, addressing the limitation of insufficient bone width for implant placement. This review traces the historical development of ARS from its initial conceptualization to current practices and future directions. Emphasizing the technique's development, indications, procedural overview, and osteotomy variations, we highlight its minimally invasive nature, which reduces patient morbidity and treatment time. This article reviews various osteotomy methods within ARS, examining their applications, benefits, and limitations. Furthermore, it discusses the technique's role in expanding treatment options for patients with compromised alveolar structures, underpinned by a high implant survival rate and the potential for immediate implant placement. We also cover the necessity of meticulous surgical technique, the importance of patient-specific factors, and the promising future of ARS facilitated by advancements in biomaterials and regenerative medicine. In summary, this review provides a comprehensive overview of ARS, offering valuable insights for dental professionals and informing future clinical practices and research in implantology.

Bruxism and dental implants: A systematic review and meta-analysis

BACKGROUND

Overload from bruxism may affect survival of dental implants.

OBJECTIVES

To evaluate implant failure and marginal bone loss (MBL) in patients presenting with probable bruxism compared to non-bruxers. The study was registered in PROSPERO (CRD42021238397).

METHODS

An electronic search September 2022 in PubMed/Medline, Web of Science and Science Direct was combined with a hand search. Two independent reviewers carried out abstract screening, full-text assessment, quality assessment (National Institutes of Health tool) and data extraction. Only studies that provided information on self-report and clinical examination needed for the diagnosis of at least 'probable' bruxism were included. A pairwise random-effect meta-analysis was carried out.

RESULTS

In total 1338 studies were identified, and after screening and full-text assessment 27 studies that presented data on 2105 implants in probable bruxers and 10 264 implants in non-bruxers were included, with 138 and 352 implant failures in respective groups. the meta-analysis showed that implants placed in probable bruxers had a higher risk of failure than in non-bruxers (OR 2.189; 95% CI 1.337, 3.583, p = .002). A meta-regression showed that follow-up time did not affect this OR. Eighteen studies provided general data on MBL but did not report results separated between bruxers and non-bruxers. Therefore, an analysis of MBL was not possible.

CONCLUSION

The results of the present systematic review show that implants placed in probable bruxers present a significantly higher risk of failure than implants placed in non-bruxers. This should be considered in treatment planning and management of implant patients.

Difference in marginal bone loss around implants between short implant-supported partial fixed prostheses with and without cantilever: a retrospective clinical study

PURPOSE

To investigate the influence of cantilever prosthetic arm on the marginal bone loss (MBL) over time around dental implants supporting short fixed partial dentures (FPDs), in a record-based retrospective study.

METHODS

All cases of 3-unit implant-supported FPDs, supported by 2-3 implants, from the database of cases treated at one specialist clinic were considered for inclusion. Only implants with a minimum of 36 months of radiological follow-up were considered. Univariate linear regression models were used to compare MBL over time between 12 clinical covariates, after which a linear mixed-effects model was built.

RESULTS

One-hundred-thirty-nine patients (64 men, 75 women) with 164 3-unit implant-supported FPDs (333 implants supporting non-cantilevered FPDs, 94 supporting cantilevered FPDs) were included in the study. The patients were followed up clinically and radiographically for a mean of 154.1 ± 78.0 (min-max, 37.3-364.6) and 132.9 ± 77.3 months (min-max, 36.8-329.9), respectively. The total number of marginal bone level double measurements (mesial and distal sides of each implant) was 2909. FPDs with cantilever presented an estimated greater MBL over time compared to FPDs without cantilever. Bruxism, sex (women), implant (modified) surface, and (poor) bone quality were also associated with higher MBL over time.

CONCLUSIONS

The use of a cantilever extension is suggested to negatively affect the bone marginal level over time around implants supporting 3-unit FPDs. Due to the small difference of the estimated MBL over long periods of follow-up between the groups, it is a matter of debate if the observed negative effect may be of clinical significance.

Frequency of Smoking and Marginal Bone Loss around Dental Implants: A Retrospective Matched-Control Study

This dental record-based retrospective study aimed to compare the marginal bone loss (MBL) around dental implants in a group of smokers in relation to a matched group of non-smokers, with a special focus on five different frequencies of daily smoking (non-smokers, and frequency of 1-5, 6-10, 11-15, and 20 cig./day). Only implants with a minimum of 36 months of radiological follow-up were considered. Univariate linear regression models were used to compare MBL over time between 12 clinical covariates, after which a linear mixed-effects model was built. After matching of the patients, the study included 340 implants in 104 smokers, and 337 implants in 100 non-smokers. The results suggested that smoking degree (greater MBL for higher degrees of smoking), bruxism (greater MBL for bruxers), jaw (greater MBL in maxilla), prosthesis fixation (greater MBL for screw-retained prosthesis), and implant diameter (greater MBL for 3.75-4.10 mm) had a significant influence on MBL over time. There appears to be a positive correlation between the degree of smoking and the degree of MBL, meaning, the higher the degree of smoking, the greater the MBL. However, the difference is not apparent for different degrees of smoking when this is high, namely above 10 cigarettes per day.

The sensitivity of bone conduction for dental implants

Dental implants are connected to the alveolar bone by osseointegration. Dental implants could be used as a potential bone conduction (BC) hearing assistive device in the mouth. However, the BC threshold of dental implants has not been reported. The present study aimed to examine the pure tone auditory thresholds of normal human subjects to BC stimulation of the implants. Dental implants showed a significantly lower BC threshold than natural teeth and mastoids. Mandibular dental implants had BC sensitivity similar to that of maxillary dental implants. The BC threshold of anterior dental implants was significantly lower than that of posterior dental implants. Dental implants exhibited excellent BC properties.

Comparing Masticatory Performance of Maxillary Mini Dental Implant Overdentures, Complete Removable Dentures and Dentate Subjects

Background: Mini dental implant (MDI) overdenture rehabilitation for the edentulous maxilla is a valuable, less invasive and affordable treatment alternative for complete removable dentures (CRD). However, comparative quantification of masticatory performance in different oral conditions are scarce. Purpose: This study compares objective masticatory performance of dentate groups, maxillary CRD and MDI overdentures and subjective masticatory performance in maxillary CRD and MDI overdentures. Materials and Methods: Four groups were defined, age 20+ dentate dental students (DS), age 50+ complete dentate subjects (DP), age 50+ maxillary CRD or MDI overdentures/dentate mandible. Objective masticatory performance was evaluated by measuring circular Variance of Hue (VOH) or the mixture degree of two-color chewing gum (Hue-check View Gum^® Test). Additionally, subjective masticatory comparison was investigated in the CRD and MDI groups, with a visual analogue scale (VAS) for different food consistencies and the Oral Health Related Quality of Life (OHRQL) OHIP-14 questionnaire. Results: The mean VOH was 0.11 (SD 0.50, range 0.05–0.27) for the dentate dental 20+ students, 0.13 (SD 0.08, range 0.03–0.31) for the 50+ dentate group (p = 0.774), 0.41 (SD 0.41, range 0.14–0.76) for the CRD group and 0.39 (SD 0.18, range 0.07–0.76) for the MDI group (p = 0.725). Based on the VAS scores, no improvement was found between the CRD and the MDI overdenture group (p > 0.050). The mean OHIP-14 total score was 12.10 (SD 15.87, range 0–56) for CRD, while the MDI group (p = 0.039) saw a significant improvement to 2.85 (SD 2.85, range 0–15). Conclusion: Comparable results in objective masticatory performance were registered in dentate 20+ and 50+ subjects with a remarkable inferior outcome for the CRD and MDI group. Compared to CRD, MDI overdentures revealed no substantial improvement in subjective and objective masticatory performance. However, for MDI a significant increase in OHRQL was apparent.

Performance of crowns cemented on a fiber-reinforced composite framework 5-unit implant-supported prostheses: in silico and fatigue analyses

OBJECTIVE

To characterize the biomechanical performance of fiber-reinforced composite 5-unit implant-supported fixed dental prostheses (FDPs) receiving individually milled crowns by insilico and fatigue analyses.

METHODS

Eighteen implant-supported five-unit fiber-reinforced composite frameworks with an individually prepared abutment design were fabricated, and ninety resin-matrix ceramic crowns were milled to fit each abutment. FDPs were subjected to step-stress accelerated-life testing with load delivered at the center of the pontic and at 2nd molar and 1st premolar until failure. The reliability of the prostheses combining all loaded data and of each loaded tooth was estimated for a mission of 50,000 cycles at 300, 600 and 900 N. Weibull parameters were calculated and plotted. Fractographic and finite element analysis were performed.

RESULTS

Fatigue analysis demonstrated high probability of survival at 300 N, with no significant differences when the set load was increased to 600 and 900 N. 1st and 2nd molar dataset showed high reliability at 300 N, which remained high for the higher load missions; whereas 1st premolar dataset showed a significant decrease when the reliability at 300 N was compared to higher load missions. The characteristic-strength of the combined dataset was 1252 N, with 1st molar dataset presenting higher values relative to 2nd molar and 1st premolar, both significantly different. Failure modes comprised chiefly cohesive fracture within the crown material originated from cracks at the occlusal area, matching the maximum principal strain location.

SIGNIFICANCE

Five-unit implant-supported FDP with crowns individually cemented in a fiber-reinforced composite framework presented a high survival probability. Crown fracture comprised the main failure mode.

Active Tactile Sensibility of Brånemark Protocol Prostheses: A Case-Control Clinical Study

Few studies have assessed active tactile sensibility in patients rehabilitated with implants. Improved knowledge about functional tactile sensibility will contribute to several clinical applications, such as protocols for immediate loading, prosthesis design, occlusal improvement in implantology, and physiological integration of implant-supported prostheses. The present study evaluated active tactile sensibility in patients rehabilitated with Brånemark-type mandibular prostheses that impede the total mucosa-supported maxillary prosthesis. Thirty-five subjects participated in this study. The experimental group (n = 18) inclusion criteria were as follows: Brånemark-type prosthesis and a total mucosa-supported maxillary prosthesis. The control group (n = 17) was composed of participants with complete healthy dentition. Carbon foils with different thicknesses (12 μm, 24 μm, 40 μm, 80 μm, and 200 μm) were placed in the premolar region to evaluate the brink of active oral tactile sensibility. The researchers assessed the participants 120 times. After evaluation, we observed a statistical difference (p < 0.05) between the groups. Additionally, the degree of sensibility was found for all thicknesses, except for 12 μm, on both sides. There was a more significant increase in perception in the control group as the carbon thickness increased. The tactile sensibility threshold was 2.5 times greater for participants with prostheses. Thus, the tactile sensibility for mandibular implant-supported and maxillary mucosa-supported prostheses is significantly lower than that of dentate patients, which was detected above the thickness of 80 μm; in patients with natural dentition, different thicknesses were seen starting from 24 μm.

Physicochemical and mechanical characterization of a fiber-reinforced composite used as frameworks of implant-supported prostheses

OBJECTIVES

To characterize the physicochemical and mechanical properties of a milled fiber-reinforced composite (FRC) for implant-supported fixed dental prostheses (FDPs).

METHODS

For FRC characterization, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction, Fourier-transformed infrared spectrometry, simultaneous thermogravimetric analysis and differential scanning calorimetry were performed. For fatigue testing, 3-unit FRC frameworks were fabricated with conventional (9 mm² connector area) and modified designs (12 mm² connector area and 2.5 mm-height lingual extension). A hybrid resin composite was veneered onto the frameworks. FDPs were subjected to step-stress accelerated-life fatigue testing until fracture or suspension. Use level probability Weibull curves at 300 N were plotted and the reliability for 100,000 cycles at 300, 600 and 800 N was calculated. Fractographic analysis was performed by stereomicroscope and SEM.

RESULTS

The FRC consisted of an epoxy resin (∼25%) matrix reinforced with inorganic particles and glass fibers (∼75%). Multi-layer continuous regular-geometry fibers were densely arranged in a parallel and bidirectional fashion in the resin matrix. Fatigue analysis demonstrated high probability of survival (99%) for FDPs at 300 N, irrespective of framework design. Conventional FDPs showed a progressive decrease in the reliability at 600 (84%) and 800 N (19%), whereas modified FDPs reliability significantly reduced only at 800 N (75%). The chief failure modes for FRC FDPs were cohesive fracture of the veneering composite on lower loads and adhesive fracture of the veneering composite at higher loads.

SIGNIFICANCE

Milled epoxy resin matrix reinforced with glass fibers composite resulted in high probability of survival in the implant-supported prosthesis scenario.

Survival of implant-supported resin-matrix ceramic crowns: In silico and fatigue analyses

OBJECTIVE

To evaluate the fatigue survival, failure mode, and maximum principal stress (MP Stress) and strain (MP Strain) of resin-matrix ceramic systems used for implant-supported crowns.

METHODS

Identical molar crowns were milled using four resin-matrix ceramics (n = 21/material): (i) Shofu Hard, (ii) Cerasmart (iii) Enamic, and (iv) Shofu HC. Crowns were cemented on the abutments, and the assembly underwent step-stress accelerated-life testing. Use level probability Weibull curves at 300 N were plotted and the reliability at 300, 500 and 800 N was calculated for a mission of 50,000 cycles. Fractographic analysis was performed using stereomicroscope and scanning electron microscope. MP Stress and MP Strain were determined by finite element analysis.

RESULTS

While fatigue dictated failures for Cerasmart (β > 1), material strength controlled Shofu Hard, Enamic, and Shofu HC failures (β < 1). Shofu HC presented lower reliability at 300 N (79%) and 500 N (59%) than other systems (>90%), statistically different at 500 N. Enamic (57%) exhibited a significant reduction in the probability of survival at 800 N, significantly lower than Shofu Hard and Cerasmart; however, higher than Shofu HC (12%). Shofu Hard and Cerasmart (>93%) demonstrated no significant difference for any calculated mission (300-800 N). Failure mode predominantly involved resin-matrix ceramic fracture originated from occlusal cracks, corroborating with the MP Stress and Strain location, propagating through the proximal and cervical margins.

SIGNIFICANCE

All resin-matrix ceramics crowns demonstrated high probability of survival in a physiological molar load, whereas Shofu Hard and Cerasmart outperformed Enamic and Shofu HC at higher loads. Material fracture comprised the main failure mode.

Evaluation of 1-Piece Versus 3-Piece Framework Designs for the Edentulous Mandible with Fixed Implant-Supported Prostheses: A Clinical, Occlusal and Biomechanical Study

PURPOSE

This study aims to evaluate the clinical, occlusal and biomechanical performance of 1-piece and 3-piece designs for implant-supported fixed dentures in the edentulous mandible.

MATERIALS AND METHODS

A total of 65 patients with edentulous mandibles who underwent fixed implant-supported restorations were recruited and subsequently assigned to 1 of 2 groups based on the framework design (1-piece or 3-piece). The participants underwent clinical and occlusal examination using a periodontal probe, T-Scan III system, and electromyography 12 months after prosthesis delivery. Two mandibular finite element models were created to evaluate stress values and their distribution during function.

RESULTS

Ninety-five point four percent (n = 62) of participants in the follow-up period underwent clinical and occlusal examination after prosthesis delivery. Clinical examination revealed a trend towards increased inflammation around the implants in the 1-piece prostheses. Occlusal parameters indicated that the 1-piece design was superior for the masticatory system than the 3-piece design. Biomechanical analysis revealed the highest stress values in the posterior region of the 3-piece design.

CONCLUSIONS

On the basis of ease of ensuring oral hygiene, when compared to the 3-piece design, the 1-piece framework design might be the superior therapy for restoring an edentulous mandible, based on occlusal and biomechanical outcomes.

Biomaterial and biomechanical considerations to prevent risks in implant therapy

This paper is aimed to present a biomaterials perspective in implant therapy that fosters improved bone response and long-term biomechanical competence from surgical instrumentation to final prosthetic rehabilitation. Strategies to develop implant surface texturing will be presented and their role as an ad hoc treatment discussed in light of the interplay between surgical instrumentation and implant macrogeometric configuration. Evidence from human retrieved implants in service for several years and from in vivo studies will be used to show how the interplay between surgical instrumentation and implant macrogeometry design affect osseointegration healing pathways, and bone morphologic and long-term mechanical properties. Also, the planning of implant-supported prosthetic rehabilitations targeted at long-term performance will be appraised from a standpoint where personal preferences (eg, cementing or screwing a prosthesis) can very often fail to deliver the best patient care. Lastly, the acknowledgement that every rehabilitation will have its strength degraded over time once in function will be highlighted, since the potential occurrence of even minor failures is rarely presented to patients prior to treatment.

Bruxism and dental implant failures: a multilevel mixed effects parametric survival analysis approach

Recent studies have suggested that the insertion of dental implants in patients being diagnosed with bruxism negatively affected the implant failure rates. The aim of the present study was to investigate the association between the bruxism and the risk of dental implant failure. This retrospective study is based on 2670 patients who received 10 096 implants at one specialist clinic. Implant- and patient-related data were collected. Descriptive statistics were used to describe the patients and implants. Multilevel mixed effects parametric survival analysis was used to test the association between bruxism and risk of implant failure adjusting for several potential confounders. Criteria from a recent international consensus (Lobbezoo et al., J Oral Rehabil, 40, 2013, 2) and from the International Classification of Sleep Disorders (International classification of sleep disorders, revised: diagnostic and coding manual, American Academy of Sleep Medicine, Chicago, 2014) were used to define and diagnose the condition. The number of implants with information available for all variables totalled 3549, placed in 994 patients, with 179 implants reported as failures. The implant failure rates were 13·0% (24/185) for bruxers and 4·6% (155/3364) for non-bruxers (P < 0·001). The statistical model showed that bruxism was a statistically significantly risk factor to implant failure (HR 3·396; 95% CI 1·314, 8·777; P = 0·012), as well as implant length, implant diameter, implant surface, bone quantity D in relation to quantity A, bone quality 4 in relation to quality 1 (Lekholm and Zarb classification), smoking and the intake of proton pump inhibitors. It is suggested that the bruxism may be associated with an increased risk of dental implant failure.

Analysis of the distribution of stress and deformation in single implant-supported prosthetic units in implants of different diameters

Abstract Introduction When stress and strain levels in the bone-implant system exceed It's capacity, a mechanical fatigue occurs, resulting in collapse and loss of osseointegration. Objective Analyze biomechanical behavior in single implant-supported prosthesis with implants of different diameters in the posterior mandible. Material and method Three different finite element models of Cone-Morse implants with the same height were created, varying the diameter (3.3 mm, 4.1 mm and 4.8 mm). The mandibular first molar area was the location of the implant, with It´s component and overlying prosthetic crown. The jawbone was composed of cortical and cancellous bone. Refined mesh of 0.5 mm was created in the critical interfaces to be analyzed. The loading of the models was performed at the point of occlusal contact with an occlusal load of 400 N. Result Maximum stress and strain occurred in the cervical regions of the implants in all groups, either in the implants or in components as well as in the analysis of cortical bone. The greater the diameter, the lower the stress and strain found in the implant. The 3.3 mm group had the highest strain in peri-implant cortical bone, and the 4.1 mm group had the smallest deformation, significantly lower than in the 4.8 mm group. Conclusion Although the biggest implant diameter (4.8 mm) appears to have lower values of stress and strain, the group of intermediate implant diameter (4.1 mm) showed less deformation rate in the cortical peri-implant bone. Therefore it is concluded that the 4.1 mm implant platform presented a more biomechanically effective peri-implant bone maintenance.

Intricate Assessment and Evaluation of Effect of Bruxism on Long-term Survival and Failure of Dental Implants: A Comparative Study

INTRODUCTION

Dental implants are one of the common lines of treatment used for the treatment of missing tooth. Various risk factors are responsible for the failure of the dental implants and occurrence of postoperative complications. Bruxism is one such factor responsible for the failure of the dental implants. The actual relation between bruxism and dental implants is a subject of long-term controversy. Hence, we carried out this retrospective analysis to assess the complications occurring in dental implants in patients with and without bruxism.

MATERIALS AND METHODS

The present study included 1100 patients which were treated for rehabilitation by dental implant procedure at 21 dental offices of Ghaziabad (India) from 2004 to 2014. Analyzing the clinical records of the patients along with assessing the photographs of the patients was done for confirming the diagnosis of bruxism. Clinical re-evaluation of the patients, who came back for follow-up, was done to confirm the diagnosis of bruxism. Systemic questionnaires as used by previous workers were used to evaluate the patients about the self-conscience of the condition. Estimation of the mechanical complications was done only in those cases which occurred on the surfaces of the restoration of the dental implants. All the results were analyzed by Statistical Package for Social Sciences (SPSS) software. Student's t-test and Pearson's chi-square test were used to evaluate the level of significance.

RESULTS

In both bruxer and non-bruxers, maximum number of dental implants was placed in anterior maxillary region. Significant difference was obtained while comparing the two groups for dimensions of the dental implants used. On comparing the total implant failed cases between bruxers and non-bruxers group, statistically significant result was obtained. Statistically significant difference was obtained while comparing the two study groups based on the health parameters, namely hypertension, diabetes, and smoking habit.

CONCLUSION

Success of dental implant is significantly affected by bruxism. Special attention is required in such patients while doing treatment planning.

CLINICAL SIGNIFICANCE

For the long-term clinical success and survival of dental implants in patients, special emphasis should be given on the patient's deleterious oral habits, such as bruxism as in long run, they influence the stability of dental implants.

Bruxism and dental implant treatment complications: a retrospective comparative study of 98 bruxer patients and a matched group

OBJECTIVES

To analyze the complications of dental implant treatment in a group of patients with bruxism in comparison with a matched group of non-bruxers.

MATERIAL AND METHODS

Patients being diagnosed as bruxers were identified within a group of patients consecutively treated with implant-supported prostheses at one specialist clinic, based on the most recent listed sign and symptoms of bruxism according to the International Classification of Sleep Disorders. A diagnostic grading system of "possible," "probable," and "definite" sleep or awake bruxism was used, according to a recent published international consensus. A case-control matching model was used to match the bruxers with a group of non-bruxers, based on five variables. Implant-, prosthetic-, and patient-related data were collected, as well as 14 mechanical complications, and compared between groups.

RESULTS

Ninety-eight of 2670 patients were identified as bruxers. The odds ratio of implant failure in bruxers in relation to non-bruxers was 2.71 (95% CI 1.25, 5.88). Considering the same number of patients with the same total number of implants equally distributed between groups, the bruxers group had a higher prevalence of mechanical complications in comparison with the non-bruxers group.

CONCLUSIONS

This study suggests that bruxism may significantly increase both the implant failure rate and the rate of mechanical and technical complications of implant-supported restorations. Other risk factors may also have influenced the results.

Evaluation of oral stereognostic ability after rehabilitating patients with complete dentures: in vivo study

Stereognosis has been defined as the appreciation of the form of objects by palpation. Whilst this definition holds good for the manual exploration of objects, it is possible for the shape of objects to be explored intra orally referred to as oral stereognosis. To better understand patients' relative satisfaction with complete dentures, differences in oral stereognostic perception, based on the identification of 6 edible objects was analyzed in a group of 30 edentulous individuals at 3 stages, namely, just before (pre-treatment), 30 min after (30 min post-treatment) and 1 month after (1 month post-treatment) the insertion of new dentures. The time required to identify each object was recorded and the correctness of identification of each object was scored using oral stereognostic score. Descriptive statistics, Wilcoxon signed rank test, Spearman's rank correlation test, Pearson Chi square test was used to statistically analyze the data obtained. OSA scores was significantly increased 1 month post-treatment compared to 30 min post-treatment (p < 0.05). It was found that Oral stereognostic test is reliable for measuring patients' oral stereognostic perception and may be used as one of the clinical aids in appreciating the functional limitations imposed by the prostheses.