N-(3-Triethoxysilylpropyl)-6-(N-maleimido)-hexanamide: An efficient heterobifunctional reagent for the construction of oligonucleotide microarrays

An electrochemical DNA microbiosensor based on succinimide-modified acrylic microspheres

An electrochemical microbiosensor for DNA has been fabricated based on new acrylic microspheres modified with reactive N-acryloxysuccinimide (NAS) functional groups. Hydrophobic poly(n-butylacrylate-N-acryloxysuccinimide) microspheres were synthesized in an emulsion form with a simple one-step photopolymerization technique. Aminated DNA probe was attached to the succinimde functional group of the acrylic microspheres via covalent bonding. The hybridization of the immobilized DNA probe with the complementary DNA was studied by differential pulse voltametry using anthraquninone-2-sulfonic acid monohydrate sodium salt (AQMS) as the electroactive hybridization label. The influences of many factors such as duration of DNA probe immobilization and hybridization, pH, type of ions, buffer concentrations, ionic strength, operational temperature and non-complementary DNA on the biosensor performance were evaluated. Under optimized conditions, the DNA microbiosensor demonstrated a linear response range to target DNA over a wide concentration range of 1.0 × 10⁻¹⁶ and 1.0 × 10⁻⁸ M with a lower limit of detection (LOD) of 9.46 × 10⁻¹⁷ M (R² = 0.97). This DNA microbiosensor showed good reproducibility with 2.84% RSD (relative standard deviation) (n = 3). Application of the NAS-modified acrylic microspheres in the construction of DNA microbiosensor had improved the overall analytical performance of the resultant DNA microbiosensor when compared with other reported DNA biosensors using other nano-materials for membranes and microspheres as DNA immobilization matrices.

Efficient immobilization and patterning of biomolecules on poly(ethylene terephthalate) films functionalized by ion irradiation for biosensor applications

The surface of a poly(ethylene terephthalate) (PET) film was selectively irradiated with proton beams at various fluences to generate carboxylic acid groups on the surface; the resulting functionalized PET surface was then characterized in terms of its wettability, chemical structure, and chemical composition. The results revealed that (i) carboxylic acid groups were successfully generated in the irradiated regions of the PET surface, and (ii) their relative amounts were dependent on the fluence. A capture biomolecule, anthrax toxin probe DNA, was selectively immobilized on the irradiated regions on the PET surface. Cy3-labeled DNA as a target biomolecule was then hybridized with the probe DNA immobilized on the PET surface. Liver-cancer-specific α-fetoprotein (AFP) antigen, as a target biomolecule, was also selectively immobilized on the irradiated regions on the PET surface. Texas Red-labeled secondary antibody was then reacted with an AFP-specific primary antibody prebound to the AFP antigen on the PET surface for the detection of the target antigen, using an indirect immunoassay method. The results revealed that (i) well-defined micropatterns of biomolecules were successfully formed on the functionalized PET surfaces and (ii) the fluorescence intensity of the micropatterns was dependent mainly on the concentrations of the target DNA hybridized to the probe DNA and the target AFP antigen immobilized on the PET films. The lowest detectable concentrations of the target DNA and target AFP antigen in this study were determined to be 4 and 16 ng/mL, respectively, with the PET film prepared at a fluence of 5 × 10(14) ions/cm(2).

Chemical strategies for immobilization of oligonucleotides

The development of oligonucleotide-based microarrays (biochips) is a major thrust area in the rapidly growing biotechnology industry, which encompasses a diverse range of research areas including genomics, proteomics, computational biology, and pharmaceuticals, among other activities. Microarray experiments have proved to be unique in offering cost-effective and efficient analysis at the genomic level. In the last few years, biochips have gained increasing acceptance in the study of genetic and cellular processes. As the increase in experimental throughput has posed many challenges to the research community, considerable progress has been made in the advancement of microarray technology. In this review, chemical strategies for immobilization of oligonucleotides have been highlighted with special emphasis on post-synthetic immobilization of oligonucleotides on glass surface. The major objective of this article is to make the researchers acquainted with some most recent advances in this area.

Polymer supported synthesis of aminooxyalkylated oligonucleotides, and some applications in the fabrication of microarrays

A new protocol has been described for solid phase preparation of 3'- and 5'-aminooxylalkylated oligonucleotides using commercially available reagents. This involves attachment of linker 4 either with an LCAA-CPG support via succinoylation followed by synthesis (3'-aminooxyalkylated oligomers) or formation of its phosphoramidite 6 followed by coupling with desired oligomer (for generating 5'-aminooxyalkylated oligomers). Both the routes produced modified oligonucleotides in sufficiently high yields and purity (on HPLC) via conventional oligonucleotide synthesis on an automated synthesizer and deprotection step using aqueous ammonia (16 h, 60 degrees C). Aminooxyalkylated oligonucleotides were used to construct microarrays on glass surface (biochips). The performance of the biochips was evaluated by immobilizing modified oligonucleotides on epoxylated glass microslides under different sets of conditions with respect to pH, temperature and time. Further, the constructed microarrays were successfully used for detection of nucleotide mismatches and bacterial typhoid.

Use of gamma-aminopropyl-coated glass surface for the patterning of oligonucleotides through oxime bond formation

The present work reports on the preparation of glass surfaces coated with NPPOC-protected aminooxy groups and their use for the patterning of oligonucleotides on glass slides and in capillary tubes. The method involves the use of surfaces coated with amino groups using (gamma-aminopropyl)triethoxy silane and subsequent grafting of the aminooxy groups by using the activated ester 1. The NPPOC-protected aminooxy groups on the surfaces can be cleaved upon irradiation. The free aminooxy groups so obtained are subsequently reacted with aldehyde-containing oligonucleotides to achieve efficient surface patterning.

N-(3-Triethoxysilylpropyl)-4-(N'-maleimidylmethyl)cyclohexanamide (TPMC): a heterobifunctional reagent for immobilization of oligonucleotides on glass surface

A new heterobifunctional reagent, namely, N-(3-triethoxysilylpropyl)-4-(N'-maleimidylmethyl)cyclohexanamide (TPMC) was developed and its potentiality for fixing of thiol (-SH) modified oligonucleotides were tested. The covalent attachment of oligonucleotides with the reagent was achieved through its maleimide functionality at one end via stable thioether linkage while the other end bearing triethoxysilyl functionality has been utilized for coupling with the virgin glass surface with simplified methodologies. Immobilization of oligonucleotides was achieved by two alternating ways. The PATH-1 involves formation of conjugate of reagent and SH-modified oligonucleotides through thioether linkage and was subsequently immobilized on unmodified glass surface through triethoxysilyl group and alternatively, PATH-2 involves reaction of reagent first with unmodified glass surface to get maleimide functionality on the surface and then the SH-modified oligonucleotides were immobilized via thioether linkage. The specificity of immobilization was tested by hybridization study with complementary fluorescein labeled oligonucleotide strand.