Real-time monitoring of restriction endonuclease activity using molecular beacon

Rolling Circle Enhanced Detection of Specific Restriction Endonuclease Activities in Crude Cell Extracts

Restriction endonucleases are expressed in all bacteria investigated so far and play an essential role for the bacterial defense against viral infections. Besides their important biological role, restriction endonucleases are of great use for different biotechnological purposes and are indispensable for many cloning and sequencing procedures. Methods for specific detection of restriction endonuclease activities can therefore find broad use for many purposes. In the current study, we demonstrate proof-of-concept for a new principle for the detection of restriction endonuclease activities. The method is based on rolling circle amplification of circular DNA products that can only be formed upon restriction digestion of specially designed DNA substrates. By combining the activity of the target restriction endonuclease with the highly specific Cre recombinase to generate DNA circles, we demonstrate specific detection of selected restriction endonuclease activities even in crude cell extracts. This is, to our knowledge, the first example of a sensor system that allows activity measurements of restriction endonucleases in crude samples. The presented sensor system may prove valuable for future characterization of bacteria species or strains based on their expression of restriction endonucleases as well as for quantification of restriction endonuclease activities directly in extracts from recombinant cells.

Positive Identification of DNA Cleavage by CRISPR-Cas9 Using Pyrene Excimer Fluorescence to Detect a Subnanometer Structural Change

The Cas9 nuclease binds and cleaves DNA through its large-scale structural rearrangements. However, its unique property of not releasing the cleaved DNA has forbidden spectroscopic detection of the cleavage event. Here, we employ a novel fluorescence probe based on pyrene excimer emission to detect a minute structural change not detectable by other methods and demonstrate its applicability to spectroscopic tracking of the Cas9 nuclease activity in time. We show that the intensity of excimer emission depends sensitively on a subtle change in the structural environment of the target nucleic acid, which enables discrimination between cleaved and uncleaved nucleic acids within the DNA/Cas9/gRNA ternary complex. Kinetic parameters were obtained from the temporal evolution of the excimer emission, which revealed that DNA binding is hardly affected by PAM-distal mismatches, whereas the rate of cleavage by Cas9 decreases dramatically even with a 1-bp mismatch. Spectroscopic studies using the pyrene-based probe should be promising for biomolecular systems affected by subnm structural changes.

A C-HCR assembly of branched DNA nanostructures for amplified uracil-DNA glycosylase assays

The amplified and selective detection of uracil-DNA glycosylase was enabled by a two-layered cascaded hybridization chain reaction machinery.

Effects of cations on small fragment of DNA polymerase I using a novel FRET assay

DNA polymerase I (PolI) digested by protease produces a small fragment (SF) containing 5'-3' exonuclease activity. The 5'-3' exonuclease activity of polI cleaves the downstream RNA primer strands during DNA replication in vivo. Previous in vitro studies suggested its capability of cleaving duplex from 5' terminal and a flap-structure-specific endonuclease activity. From the crystal structures of other nucleases and biochemical data, a two-metal-ion mechanism has been proposed but has not been determined. In this study, we cloned, expressed, and purified the SF protein, and established a novel fluorescence resonance energy transfer (FRET) assay to analyze the catalytic activity of the SF protein. The effects of several metal ions on its catalytic capability were analyzed using this FRET assay. Results showed that Mg2+, Mn2+, and Zn2+ were able to activate the cleavage of SF, while Ca2+, Ni2 +, and Co2+ were not suitable for SF catalysis. The effects of K+, Na+, and dNTP were also determined.

Increased neutrophil extracellular trap-mediated Staphylococcus aureus clearance through inhibition of nuclease activity by clindamycin and immunoglobulin

The Gram-positive human pathogen Staphylococcus aureus causes a variety of human diseases such as skin infections, pneumonia, and endocarditis. The micrococcal nuclease Nuc1 is one of the major S. aureus virulence factors and allows the bacterium to avoid neutrophil extracellular trap (NET)–mediated killing. We found that addition of the protein synthesis inhibitor clindamycin to S. aureus LAC cultures decreased nuc1 transcription and subsequently blunted nuclease activity in a molecular beacon–based fluorescence assay. We also observed reduced NET degradation through Nuc1 inhibition translating into increased NET-mediated clearance. Similarly, pooled human immunoglobulin specifically inhibited nuclease activity in a concentration-dependent manner. Inhibition of nuclease activity by clindamycin and immunoglobulin enhanced S. aureus clearance and should be considered in the treatment of S. aureus infections.

Fluorescent probes for nucleic Acid visualization in fixed and live cells

This review analyses the literature concerning non-fluorescent and fluorescent probes for nucleic acid imaging in fixed and living cells from the point of view of their suitability for imaging intracellular native RNA and DNA. Attention is mainly paid to fluorescent probes for fluorescence microscopy imaging. Requirements for the target-binding part and the fluorophore making up the probe are formulated. In the case of native double-stranded DNA, structure-specific and sequence-specific probes are discussed. Among the latest, three classes of dsDNA-targeting molecules are described: (i) sequence-specific peptides and proteins; (ii) triplex-forming oligonucleotides and (iii) polyamide oligo(N-methylpyrrole/N-methylimidazole) minor groove binders. Polyamides seem to be the most promising targeting agents for fluorescent probe design, however, some technical problems remain to be solved, such as the relatively low sequence specificity and the high background fluorescence inside the cells. Several examples of fluorescent probe applications for DNA imaging in fixed and living cells are cited. In the case of intracellular RNA, only modified oligonucleotides can provide such sequence-specific imaging. Several approaches for designing fluorescent probes are considered: linear fluorescent probes based on modified oligonucleotide analogs, molecular beacons, binary fluorescent probes and template-directed reactions with fluorescence probe formation, FRET donor-acceptor pairs, pyrene excimers, aptamers and others. The suitability of all these methods for living cell applications is discussed.

Label-free luminescent oligonucleotide-based probes

Breakthrough advances in chemistry and biology over the last two decades have vastly expanded the repertoire of nucleic acid structure and function with potential application in multiple areas of science and technology, including sensing and analytical applications. DNA oligonucleotides represent popular tools for the development of sensing platforms due to their low cost, rich structural polymorphism, and their ability to bind to cognate ligands with sensitivity and specificity rivaling those for protein enzymes and antibodies. In this review, we give an overview of the "label-free" approach that has been a particular focus of our group and others for the construction of luminescent DNA-based sensing platforms. The label-free strategy aims to overcome some of the drawbacks associated with the use of covalently-labeled oligonucleotides prevalent in electrochemical and optical platforms. Label-free DNA-based probes harness the selective interaction between luminescent dyes and functional oligonucleotides that exhibit a "structure-switching" response upon binding to analytes. Based on the numerous examples of label-free luminescent DNA-based probes reported recently, we envisage that this field would continue to thrive and mature in the years to come.

A transfection reporter for the prevention of false-negative results in molecular beacon experiments

We previously developed a molecular beacon-type probe to detect the strand scission in cellular base excision repair and found that the phosphodiester linkages in the fluorophore/quencher linkers were cleaved. This reaction was applied to a transfection reporter, which contained the unmodified phosphodiester in the linker to another type of fluorophore. After cotransfection of cells with the probe and the reporter, the signals were used to detect the incision and to confirm the proper transfection, respectively. This method will contribute to the prevention of false-negative results in experiments using molecular beacon-type probes.

Real-time monitoring of disintegration activity of catalytic core domain of HIV-1 integrase using molecular beacon

HIV-1 integrase, an essential enzyme for retroviral replication, is a validated target for anti-HIV therapy development. The catalytic core domain of integrase (IN-CCD) is capable of catalyzing disintegration reaction. In this work, a hairpin-shaped disintegration substrate was designed and validated by enzyme-linked immunosorbent assay; a molecular beacon-based assay was developed for disintegration reaction of IN-CCD. Results showed that the disintegration substrate could be recognized and catalyzed by IN-CCD, and the disintegration reaction can be monitored according to the increase of fluorescent signal. The assay can be applied to real-time detection of disintegration with advantages of simplicity, high sensitivity, and excellent specificity.

A universal and label-free aptasensor for fluorescent detection of ATP and thrombin based on SYBR Green I dye

A facile and universal aptamer-based label-free approach for selective and sensitive fluorescence detection of proteins and small biomolecules by using the SYBR Green I (SGI) dye is developed. This robust versatile biosensing strategy relies on fluorescence turn-off changes of SGI, resulting from target-induced structure switching of aptamers. Upon binding with the targets, the aptamers dissociate from the respective cDNA/aptamer duplexes, leading to the release of the dsDNA-intercalated SGI into solution and the quenching of the corresponding fluorescence intensities. Such target-induced conformational changes and release of aptamers from the DNA duplexes essentially lead to the change in the fluorescence signal of the SGI and thus constitute the mechanism of our aptamer-based label-free fluorescence biosensor for specific target analyses. Under optimized conditions, our method exhibits high sensitivity and selectivity for the quantification of ATP and thrombin with low detection limits (23.4 nM and 1.1 nM, respectively). Compared with previous reported methods for aptamer-based detection of ATP and thrombin, this label-free approach is selective, simple, convenient and cost-efficient without any chemical labeling of the probe or the target. Therefore, the present strategy could be easily applicable to biosensors that target a wide range of biomolecules.

Fluorescence detection of adenosine triphosphate using smart probe

A novel fluorescent probe for adenosine triphosphate (ATP) assay based on DNA ligation is proposed in this article. This approach uses a novel smart probe, T4 DNA ligase, and two short oligonucleotides. In the presence of ATP, the T4 DNA ligase catalyzes the ligation reaction and the ligation product restores the fluorescence of the smart probe. This method is very sensitive with a 0.5-nM limit of detection. Compared with current assay methods, the strategy is simpler, cheaper, and 40 times more sensitive.

Label-free fluorescent assay for real-time monitoring site-specific DNA cleavage by EcoRI endonuclease

DNA cleavage reaction catalyzed by nucleases is essential in many important biological processes and medicinal chemistry. Therefore, it is important to develop reliable and facile methods to assay nuclease activity. With this goal in mind, we report a fluorescent assay for label-free, facile, and real-time monitoring of DNA cleavage by EcoRI endonuclease using SYBR Green I (SGI) as a signal probe. The fluorescence of SGI dramatically increased when the free SGI was mixed with double-stranded DNA (dsDNA) substrate. Upon interacting with EcoRI, which cleaves the dsDNA into small fragments, the weakened interaction between SGI and the shortened DNA fragments caused a decrease in fluorescence of SGI. EcoRI-DNA interaction was real-time studied by monitoring fluorescence change with the prolonging of interaction time. The important kinetic parameters, including Michaelis-Menten constant (K(M)) and maximum initial velocity (V(max)), were accurately calculated, which is consistent with previously reported studies. Site-specific DNA cleavage by EcoRI endonuclease has also been verified by gel electrophoresis analysis, which indicated that this method is a simple and effective approach to assay DNA cleavage reaction. Specificity investigation demonstrated that EcoRI-DNA interactions can be studied with high selectivity. Compared with previously reported methods, this approach is selective, simple, convenient and cost-efficient without any labeling of the probe or of the target.

Intermolecular and intramolecular quencher based quantum dot nanoprobes for multiplexed detection of endonuclease activity and inhibition

DNA cleavage by endonucleases plays an important role in many biological events such as DNA replication, recombination, and repair and is used as a powerful tool in medicinal chemistry. However, conventional methods for assaying endonuclease activity and inhibition by gel electrophoresis and chromatography techniques are time-consuming, laborious, not sensitive, or costly. Herein, we combine the high specificity of DNA cleavage reactions with the benefits of quantum dots (QDs) and ultrahigh quenching abilities of inter- and intramolecular quenchers to develop highly sensitive and specific nanoprobes for multiplexed detection of endonucleases. The nanoprobe was prepared by conjugating two sets of DNA substrates carrying quenchers onto the surface of aminated QDs through direct assembly and DNA hybridization. With this new design, the background fluorescence was significantly suppressed by introducing inter- and intramolecular quenchers. When these nanoprobes are exposed to the targeted endonucleases, specific DNA cleavages occur and pieces of DNA fragments are released from the QD surface along with the quenchers, resulting in fluorescence recovery. The endonuclease activity was quantified by monitoring the change in the fluorescence intensity. The detection was accomplished with a single excitation light. Multiplexed detection was demonstrated by simultaneously assaying EcoRI and BamHI (as model analytes) using two different emissions of QDs. The limits of detection were 4.0 × 10(-4) U/mL for EcoRI and 8.0 × 10(-4) U/mL for BamHI, which were at least 100 times more sensitive than traditional gel electrophoresis and chromatography assays. Moreover, the potential application of the proposed method for screening endonuclease inhibitors has also been demonstrated. The assay protocol presented here proved to be simple, sensitive, effective, and easy to carry out.

Multiplexed detection of nucleic acids in a combinatorial screening chip

Multiplexed diagnostic testing has the potential to dramatically improve the quality of healthcare. Simultaneous measurement of health indicators and/or disease markers reduces turnaround time and analysis cost and speeds up the decision making process for diagnosis and treatment. At present, however, most diagnostic tests only provide information on a single indicator or marker. Development of efficient diagnostic tests capable of parallel screening of infectious disease markers could significantly advance clinical and diagnostic testing in both developed and developing parts of the world. Here, we report the multiplexed detection of nucleic acids as disease markers within discrete wells of a microfluidic chip using molecular beacons and total internal reflection fluorescence microscopy (TIRFM). Using a 4 × 4 array of 200 pL wells, we screened for the presence of four target single stranded oligonucleotides encoding for conserved regions of the genomes of four common viruses: human immunodeficiency virus-1 (HIV-1), human papillomavirus (HPV), Hepatitis A (Hep A) and Hepatitis B (Hep B). Target oligonucleotides are accurately detected and discriminated against alternative oligonucleotides with different sequences. This combinatorial chip represents a versatile platform for the development of clinical diagnostic tests for simultaneous screening, detection and monitoring of a wide range of biological markers of disease and health using minimal sample size.

Multiplex detection of endonucleases by using a multicolor gold nanobeacon

A highly sensitive and selective assay based on a novel enzyme-responsive multicolor gold nanobeacon has been developed for the multiplex detection of endonucleases, a group of very important nucleases. The nanobeacon takes advantage of the high specificity of DNA cleavage reactions combined with the unique fluorescence-quenching property of gold nanoparticles (AuNPs). To prepare the nanobeacon, three hairpin DNA reporters, each labeled at the 5' terminus with a fluorescent dye (i.e., fluorescein amidite (FAM), carboxy-X-rhodamine (ROX), cyanine dye (Cy5)), that respond to one of three different endonucleases are co-assembled at the surface of AuNPs (15 nm). This assembly brings the dyes into very close proximity with the AuNP, which leads to significant quenching of the fluorescence due to the nanosurface energy-transfer (NSET) effect. When the nanobeacon is exposed to the targeted endonucleases, specific DNA cleavage occurs and pieces of DNA fragments are released from the AuNP surface along with the fluorescent dye, which results in the fluorescence recovery that provides the basis for a quantitative measurement of endonuclease activity. Three endonucleases, namely HaeIII, EcoRI, and EcoRV, were studied as the proof-of-concept analytes. These endonucleases in homogeneous mixture solutions were simultaneously quantified by the proposed assay with high sensitivity and specificity. The limits of detection obtained were in the range of 5.0×10(-4)  U mL(-1) to 1.0×10(-3)  U mL(-1) of endonuclease; these limits are at least 100 times more sensitive than the previously reported endonuclease assays. Endonuclease inhibitors impair the DNA cleavage, so it is anticipated that the present method has great potential for screening inhibitors of endonucleases. To demonstrate this application, the inhibitory effects of certain anticancer drugs on HaeIII, EcoRI, and EcoRV activities were studied. The present protocol proved to be sensitive, reliable, and easy to carry out.

Protein analysis based on molecular beacon probes and biofunctionalized nanoparticles

With the completion of the human genome-sequencing project, there has been a resulting change in the focus of studies from genomics to proteomics. By utilizing the inherent advantages of molecular beacon probes and biofunctionalized nanoparticles, a series of novel principles, methods and techniques have been exploited for bioanalytical and biomedical studies. This review mainly discusses the applications of molecular beacon probes and biofunctionalized nanoparticles-based technologies for real-time, in-situ, highly sensitive and highly selective protein analysis, including the nonspecific or specific protein detection and separation, protein/DNA interaction studies, cell surface protein recognition, and antigen-antibody binding process-based bacteria assays. The introduction of molecular beacon probes and biofunctionalized nanoparticles into the protein analysis area would necessarily advance the proteomics research.

Universal platform for sensitive and label-free nuclease assay based on conjugated polymer and DNA/intercalating dye complex

By taking advantage of the large signal amplification through efficient fluorescence resonance energy transfer (FRET) from the conjugated polymer to the intercalating dye mediated by DNA, a new strategy for nuclease assay has been developed using conjugated polymer and DNA/intercalating dye complex. The discrimination of DNA before or after digestion by nuclease denotes the universal application of the approach, in which either dsDNA or ssDNA substrates could be used for detecting nuclease activity. This method can be extended to most nucleases by simply changing the substrate DNA. The present method is label-free, rapid, and highly sensitive, with a detection limit much better or at least comparable to previous reports. In addition, this assay is easy to implement for visual detection with the assistance of a UV transilluminator. We reason that a similar strategy can be adopted for the detection of other analytes.

Real-time fluorescent quantitative immuno-PCR method for determination of fluoranthene in water samples with a molecular beacon

A reliable and sensitive competitive real-time fluorescent quantitative immuno-PCR (RTFQ-IPCR) assay using a molecular beacon was developed for the determination of trace fluoranthene (FL) in the environment. Under optimized assay conditions, FL can be determined in the concentration range from 1 fg/mL to 100 ng/mL, withy = 0.194x + 7.859, and a correlation coefficient of 0.967 was identified, with a detection limit of 0.6 fg/mL. Environmental water samples were successfully analyzed, recovery was between 90% and 116%, with intra-day relative standard deviation (RSD) of 6.7%-12.8% and inter-day RSD of 8.4%-15.2%. The results obtained from RTFQ-IPCR were confirmed by ELISA, showing good accuracy and suitability to analyze FL in field samples. As a highly sensitive method, the molecular beacon-based RTFQ-IPCR is acceptable and promising for providing reliable test results to make environmental decisions.

Detection of trace anthracene in soil samples with real-time fluorescence quantitative immuno-PCR using a molecular beacon probe

We developed a highly sensitive and robust real-time fluorescence quantitative immuno-PCR (RTFQ-IPCR) method which uses molecular beacon (MB) probe to detect trace anthracene in the environment. This method was performed on serial dilutions of known anthracene concentrations equivalent to 10-fold dilutions of 10fg/mL to 100pg/mL. We obtained a linear relationship between 10fg/mL and 100pg/mL, with y=0.684x+13.221. A correlation coefficient of 0.994 was also identified, with a detection limit of 4.5fg/mL. After investigating the presence of anthracene in soil samples via RTFQ-IPCR, the obtained concentrations were confirmed by ELISA to be correct and believable, with the recovery ratio ranging from 82% to 112.5%. Based on its sensitivity and reproducibility, MB-based RTFQ-IPCR was found to be acceptable for use in on-site field tests to provide rapid, quantitative, and reliable test results for making environmental decisions.

A simple, universal colorimetric assay for endonuclease/methyltransferase activity and inhibition based on an enzyme-responsive nanoparticle system

An enzyme responsive nanoparticle system that uses a DNA-gold nanoparticle (AuNP) assembly as the substrate has been developed for the simple, sensitive, and universal monitoring of restriction endonucleases in real time. This new assay takes advantage of the palindromic recognition sequence of the restriction nucleases and the unique optical properties of AuNPs and is simpler than the procedure previously described by by Xu et al. (Angew. Chem. Int. Ed. Engl. 2007, 46, 3468-3470). Because it involves only one type of ssDNA modified AuNPs, this assay can be directed toward most of the endonucleases by simply changing the recognition sequence found within the linker DNA. In addition, the endonuclease activity could be quantitatively analyzed by the value of the reciprocal of hydrolysis half time (t(1/2)(-1)). Furthermore, our new design could also be applied to the assay of methyltransferase activity since the methylation of DNA inhibits its cleavage by the corresponding restriction endonuclease, and thus, this new methodology can be easily adapted to high-throughput screening of methyltransferase inhibitors.

Detection of naphthalene by real-time immuno-PCR using molecular beacon

A rapid and quantitative technique is urgently needed in detecting toxicological and carcinogenic polycyclic aromatic hydrocarbons (PAHs) in the environment. Using a molecular beacon (MB), this study aimed at detecting the presence of naphthalene through an assay developed via a highly sensitive and robust, real-time fluorescent quantitative immuno-PCR (FQ-IPCR), which was then performed on serial dilutions of known naphthalene concentrations equivalent to 10-fold dilutions of 1-10(4) fg/mL. A correlation coefficient of 0.996 was identified, and a linear relationship between 1 fg/mL and 10 pg/mL, with y = 1.392x + 11.188, was obtained. A trace amount (1 fg/mL) of naphthalene congeners could be detected using this method. Five water samples were then used for validation, the results of which were further confirmed through a conventional enzyme-linked immuno sorbent assay (ELISA). Based on sensitivity and reproduction, the MB-based FQ-IPCR technique is a promising tool for monitoring environmental endocrine disruptors.

A spectroscopic method to determine the activity of the restriction endonuclease EcoRV that involves a single reaction

A one-step protocol is presented to determine the activity of EcoRV as a model of restriction enzymes. The protocol involved a molecular beacon as DNA substrate, with the target sequence recognized by EcoRV in the stem. EcoRV cleaved the stem forming two fragments, one of which contained the fluorophore and quencher, initially bound by 3 bp. This shorter fragment rapidly dissociated at 37 °C, causing an increase of fluorescence intensity that was used to gauge the reaction kinetics. The reaction can be described using the Michaelis-Menten mechanism, and the kinetic parameters obtained were compared with literature values involving other protocols.

On-gel fluorescent visualization and the site identification of S-nitrosylated proteins

Mounting evidence indicates that S-nitrosylation of critical cysteine residues in a protein represents a common feature of protein function regulation and cell signaling. However, the progress in studying the exact role of S-nitrosylation has been hampered by a lack of rapid and accurate methods for the detection of these S-nitrosylated proteins and the exact modification sites. In this article, we report a fluorescence-based method in which the S-nitrosylated cysteines are converted into 7-amino-4-methylcoumarin-3-acetic acid (AMCA) fluorophore-labeled cysteines-termed the AMCA switch method. The labeled proteins are then analyzed by nonreducing SDS-PAGE, and the S-nitrosylated proteins can be readily detected as brilliant blue bands after the activation of ultraviolet light. Furthermore, the sites of modification can be determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) after in-gel tryptic digestion of the fluorescent band, and the recognizable AMCA tag in the MS spectra ensures the accurate site identification of the nitrosocysteines. Therefore, our method offers some apparent advantages by direct visualization of on-gel image of S-nitrosylated proteins, shorter experiment time by skipping the anti-biotin immunoblotting step, and elimination of the potential interference of endogenous biotinylated proteins. Based on this method, we detected the S-nitrosylation and the modified site in bovine serum albumin and gankyrin after in vitro S-nitrosylation. Overall, our results indicate that the AMCA switch method is a fast and accurate method to identify the S-nitrosylated protein and the modification sites.