Sample preparation for sequencing hits from one-bead-one-peptide combinatorial libraries by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Peptide Affinity Chromatography Applied to Therapeutic Antibodies Purification

The interest in therapeutic monoclonal antibodies (mAbs) has significantly grown in the pharmaceutical industry, exceeding 100 FDA mAbs approved. Although the upstream processing of their industrial production has been significantly improved in the last years, the downstream processing still depends on immobilized protein A affinity chromatography. The high cost, low capacity and short half-life of immobilized protein A chromatography matrices, encouraged the design of alternative short-peptide ligands for mAb purification. Most of these peptides have been obtained by screening combinatorial peptide libraries. These low-cost ligands can be easily produced by solid-phase peptide synthesis and can be immobilized on chromatographic supports, thus obtaining matrices with high capacity and selectivity. Furthermore, matrices with immobilized peptide ligands have longer half-life than those with protein A due to the higher stability of the peptides. In this review the design and synthesis of peptide ligands, their immobilization on chromatographic supports and the evaluation of the affinity supports for their application in mAb purification is described.

Fully Automated Screening of a Combinatorial Library to Avoid False Positives: Application to Tetanus Toxoid Ligand Identification

Peptide ligands are widely used in protein purification by affinity chromatography. Here, we applied a fully automated two-stage library screening method that avoids false positive peptidyl-bead selection and applied it to tetanus toxoid purification. The first library screening was performed using only sulforhodamine (a fluorescent dye), and fluorescent beads were isolated automatically by flow cytometry and discarded. A second screening was then performed with the rest of the library, using the target protein (tetanus toxoid)-rhodamine conjugate. This time, fluorescent beads were isolated, and peptide sequences were identified by matrix-assisted laser desorption/ionization tandem mass spectrometry. Those appearing with greater frequency were synthesized and immobilized on agarose to evaluate a range of chromatographic purification conditions. The affinity matrix PTx1-agarose (Ac-Leu-Arg-Val-Tyr-His-Gly-Gly-Ala-Gly-Lys-agarose) showed the best performance when 20 mM sodium phosphate, 0.05% Tween 20, pH 5.9 as adsorption buffer and 100 mM Tris-HCl, 100 mM NaCl, pH 8.0 as elution buffer were used. A pure tetanus toxoid (Ttx) was loaded on a chromatographic column filled with the PTx1 matrix, and 96% adsorption was achieved, with a K _d of 9.18 ± 0.07 nmol/L and a q _m of 1.31 ± 0.029 μmol Ttx/mL matrix. Next, a Clostridium tetani culture supernatant treated with formaldehyde (to obtain the toxoid) was applied as a sample. The sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis showed a band, identified by electrospray ionization mass spectrometry as the Ttx, that appeared only in the elution fraction, where an S-layer protein was also detected.

Design of Affinity Chromatography Peptide Ligands Through Combinatorial Peptide Library Screening

In this chapter, a protocol to design affinity chromatography matrices with short peptide ligands immobilized for protein purification is described. The first step consists of the synthesis of a combinatorial peptide library on the hydroxymethylbenzoyl (HMBA)-ChemMatrix resin by the divide-couple-recombine (DCR) method using the Fmoc chemistry. Next, the library is screened with the protein of interest labeled with a fluorescent dye or biotin. Subsequently, peptides contained on positive beads are identified by tandem matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS/MS), and those sequences showing greater consensus are synthesized in larger quantities and immobilized on chromatographic supports. Finally, target protein adsorption on peptide affinity matrices is evaluated through equilibrium adsorption isotherms and breakthrough curves.

IgE Epitope Profiling for Allergy Diagnosis and Therapy - Parallel Analysis of a Multitude of Potential Linear Epitopes Using a High Throughput Screening Platform

Immunoglobulin E (IgE) is pivotal for manifestation and persistence of most immediate-type allergies and some asthma phenotypes. Consequently, IgE represents a crucial target for both, diagnostic purposes as well as therapeutic approaches. In fact, allergen-specific immunotherapy – aiming to re-route an IgE-based inflammatory response into an innocuous immune reaction against the allergen – is the only curative approach for IgE-mediated allergic diseases known so far. However, this requires the cognate allergen to be known. Unfortunately, even in well-characterized allergics or asthmatics, often just a small fraction of total IgE can be assigned to specific target allergens. To overcome this knowledge gap, we have devised an analytical platform for unbiased IgE target epitope detection. The system relies on chemically produced random peptide libraries immobilized on polystyrene beads (“one-bead-one-compound (OBOC) libraries”) capable to present millions of different peptide motifs simultaneously to immunoglobulins from biological samples. Beads binding IgE are highlighted with a fluorophore-labeled anti-IgE antibody allowing fluorescence-based detection and isolation of positives, which then can be characterized by peptide sequencing. Setting-up this platform required an elaborate optimization process including proper choice of background suppressants, secondary antibody and fluorophore label as well as incubation conditions. For optimal performance our procedure involves a sophisticated pre-adsorption step to eliminate beads that react nonspecifically with anti-IgE secondary antibodies. This step turned out to be important for minimizing detection of “false positive” motifs that otherwise would erroneously be classified as IgE epitopes. In validation studies we were able to retrieve artificial test-peptide beads spiked into our library by using IgE directed against those test-peptides at physiological concentrations (≤20 IU/ml of specific IgE), and disease-relevant bead-bound epitopes of the major peanut allergen Ara h 2 by screening with sera from peanut allergics. Thus, we established a platform with which one can find and validate new immunoglobulin targets using patient material which displays a largely unknown immunoglobulin repertoire.

Bottom-Up Design Approach for OBOC Peptide Libraries

One-bead-one-compound peptide libraries, developed following the top-down experimental approach, have attracted great interest in the identification of potential ligands or active peptides. By exploiting a reverse experimental design approach based on the bottom-up strategy, we aimed to develop simplified, maximally diverse peptide libraries that resulted in the successful characterization of mixture components. We show that libraries of 32 and 48 components can be successfully detected in a single run using chromatography coupled to mass spectrometry (UPLC-MS). The proposed libraries were further theoretically evaluated in terms of their composition and physico-chemical properties. By combining the knowledge obtained on single libraries we can cover larger sequence spaces and provide a controlled exploration of the peptide chemical space both theoretically and experimentally. Designing libraries by using the bottom-up approach opens up the possibility of rationally fine-tuning the library complexity based on the available analytical methods.

A short peptide fragment of the vascular endothelial growth factor as a novel ligand for bevacizumab purification

Bevacizumab is a vascular endothelial growth factor (VEGF)-directed monoclonal antibody (mAb) used for the treatment of several human cancers. Given that bevacizumab is administered intravenously, it must have extremely high purity, which is achieved by purification with protein A affinity chromatography (AC). However, protein A is a very expensive ligand, thereby increasing the cost of purification. Furthermore, the harsh elution conditions required to recover bevacizumab from the AC column can damage both the mAb and protein A. In contrast, short peptides show higher stability, easier synthesis and lower cost and are therefore ideal ligands for AC. In the present study, the peptide Ac-PHQGQHIGVSK contained in the VEGF fragment that binds bevacizumab, was synthesized and immobilized on agarose. The peptidyl-agarose showed affinity for bevacizumab, with an equilibrium dissociation constant value of 2.2±0.5 x 10^-7 M under optimal conditions. Samples of CHO cell filtrate producing bevacizumab were loaded on the peptidyl-agarose chromatography column. Bevacizumab was recovered from the elution fraction with a yield of 94% and a purity of 98%. The maximum capacity (qm) 38±2 mg of bevacizumab per mL of matrix was comparable to that of commercial protein A matrices. Moreover, the peptide ligand showed greater stability and a lower cost than protein A. Unlike peptides previously reported for IgG purification, the ligand described herein allows mAb elution under mild conditions, thereby favoring the integrity of bevacizumab. The lack of Trp, Met or Cys in the peptide prevents its oxidation and extends the useful life of the chromatographic matrix.

Efficient Screening of Combinatorial Peptide Libraries by Spatially Ordered Beads Immobilized on Conventional Glass Slides

Screening of one-bead-one-compound (OBOC) libraries is a proven procedure for the identification of protein-binding ligands. The demand for binders with high affinity and specificity towards various targets has surged in the biomedical and pharmaceutical field in recent years. The traditional peptide screening involves tedious steps such as affinity selection, bead picking, sequencing, and characterization. Herein, we present a high-throughput "all-on-one chip" system to avoid slow and technically complex bead picking steps. On a traditional glass slide provided with an electrically conductive tape, beads of a combinatorial peptide library are aligned and immobilized by application of a precision sieve. Subsequently, the chip is incubated with a fluorophore-labeled target protein. In a fluorescence scan followed by matrix-assisted laser desorption/ionization (MALDI)-time of flight (TOF) mass spectrometry, high-affinity binders are directly and unambiguously sequenced with high accuracy without picking of the positive beads. The use of an optimized ladder sequencing approach improved the accuracy of the de-novo sequencing step to nearly 100%. The new technique was validated by employing a FLAG-based model system, identifying new peptide binders for the monoclonal M2 anti-FLAG antibody, and was finally utilized to search for IgG-binding peptides. In the present format, more than 30,000 beads can be screened on one slide.

The inherent matrix properties of lichen metabolites in matrix-assisted laser desorption ionization time-of-flight mass spectrometry

RATIONALE

Light-absorbing secondary metabolites from lichens were recently reported to exhibit promising Laser Desorption Ionization (LDI) properties, enabling their direct detection from crude lichen extracts. In addition, many of them display close structural homologies to commercial Matrix-Assisted Laser Desorption Ionization (MALDI) matrices, which is incentive for the evaluation of their matrical properties. The current study systematically evaluated the matrix effects of several structural classes of lichen metabolites: monoaromatic compounds, quinone derivatives, dibenzofuran-related molecules and the shikimate-derived vulpinic acid. Their matrical properties were tested against a wide range of structurally diverse analytes including alkaloids, coumarins, flavonoids and peptides.

METHODS

Triplicate automatic positive-ion mode MALDI analyses were carried out and ionization efficiencies were compared with those of structurally related reference matrices (i.e. DHB, HCCA, dithranol and usnic acid) in terms of (i) analyte absolute intensities and (ii) Matrix Suppressing Effect (MSE) scores.

RESULTS

Monoaromatic lichen metabolites revealed matrical properties similar to those of DHB when obtained under comparable experimental conditions. Likewise, anthraquinone metabolites triggered ionization of tested analytes in a similar way to the structurally related dithranol. Finally, dibenzofuran derivatives displayed a broad ionization profile, reminiscent of that of (+)-usnic acid.

CONCLUSIONS

Lichen metabolites exhibit interesting MALDI matrix properties, especially for medium and low molecular weight analytes. For many of the tested molecules, matrix ion formation was very limited. This proof-of-concept study paves the way for follow-up investigations to assess the matrix properties of lichen metabolites against a wider array of analytes as well as adapting experimental settings to individually optimize the performance of successfully tested candidates.

Application of Z-sinapinic matrix in peptide MALDI-MS analysis

Since introduction of sinapinic acid (SA) and α-cyano-4-hydroxycinnamic acid as matrices, successful application of matrix-assisted laser desorption/ionization mass spectrometry started for protein/polypeptides. Both show some limitations in short peptide analysis because matrix clusters are quite abundant. Cinnamics currently used are E-cinnamics. Here, Z-SA as matrix for peptides is studied and compared with E-SA and α-cyano-4-hydroxycinnamic acid. Minor number of clusters is always observed in the low m/z region allowing the detection of short peptides. The results here described show that this novel matrix is a tool of choice for direct, rapid and sensitive detection of hydrophilic and hydrophobic peptides. Copyright © 2017 John Wiley & Sons, Ltd.

Peptide-Stabilized, Fluorescent Silver Nanoclusters: Solid-Phase Synthesis and Screening

Few-atom silver nanoclusters (AgNCs) can exhibit strong fluorescence; however, they require ligands to prevent aggregation into larger nanoparticles. Fluorescent AgNCs in biopolymer scaffolds have so far mainly been synthesized in solution, and peptides have only found limited use compared to DNA. Herein, we demonstrate how solid-phase methods can increase throughput dramatically in peptide ligand screening and in initial evaluation of fluorescence intensity and chemical stability of peptide-stabilized AgNCs (P-AgNCs). 9-Fluorenylmethyloxycarbonyl (Fmoc) solid-phase peptide synthesis on a hydroxymethyl-benzoic acid (HMBA) polyethylene glycol polyacrylamide copolymer (PEGA) resin enabled on-resin screening and evaluation of a peptide library, leading to identification of novel peptide-stabilized, fluorescent AgNCs. Using systematic amino acid substitutions, we synthesized and screened a 144-member library. This allowed us to evaluate the effect of length, charge, and Cys content in peptides used as ligands for AgNC stabilization. The results of this study will enable future spectroscopic studies of these peptide-stabilized AgNCs for bioimaging and other applications.

A simple protocol for combinatorial cyclic depsipeptide libraries sequencing by matrix-assisted laser desorption/ionisation mass spectrometry

Short cyclic peptides have a great interest in therapeutic, diagnostic and affinity chromatography applications. The screening of 'one-bead-one-peptide' combinatorial libraries combined with mass spectrometry (MS) is an excellent tool to find peptides with affinity for any target protein. The fragmentation patterns of cyclic peptides are quite more complex than those of their linear counterparts, and the elucidation of the resulting tandem mass spectra is rather more difficult. Here, we propose a simple protocol for combinatorial cyclic libraries synthesis and ring opening before MS analysis. In this strategy, 4-hydroxymethylbenzoic acid, which forms a benzyl ester with the first amino acid, was used as the linker. A glycolamidic ester group was incorporated after the combinatorial positions by adding glycolic acid. The library synthesis protocol consisted in the following: (i) incorporation of Fmoc-Asp[2-phenylisopropyl (OPp)]-OH to Ala-Gly-oxymethylbenzamide-ChemMatrix, (ii) synthesis of the combinatorial library, (iii) assembly of a glycolic acid, (iv) couple of an Ala residue in the N-terminal, (v) removal of OPp, (vi) peptide cyclisation through side chain Asp and N-Ala amino terminus and (vii) removal of side chain protecting groups. In order to simultaneously open the ring and release each peptide, benzyl and glycolamidic esters were cleaved with ammonia. Peptide sequences could be deduced from the tandem mass spectra of each single bead evaluated. The strategy herein proposed is suitable for the preparation of one-bead-one-cyclic depsipeptide libraries that can be easily open for its sequencing by matrix-assisted laser desorption/ionisation MS. It employs techniques and reagents frequently used in a broad range of laboratories without special expertise in organic synthesis.

Peptide affinity chromatography based on combinatorial strategies for protein purification

We describe a method to develop affinity chromatography matrices with short peptide ligands for protein purification. The method entitles the following: (a) synthesis of a combinatorial library on the hydromethylbenzoyl (HMBA)-ChemMatrix resin by the divide-couple-recombine (DCR) method using the Fmoc chemistry, (b) library screening with the protein of interest labeled with a fluorescent dye or biotin, (c) identification of peptides contained on positive beads by tandem matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS/MS), (d) solid-phase peptide ligand synthesis and immobilization in chromatographic supports, and (e) evaluation of protein adsorption on peptide affinity matrices from the equilibrium isotherms and breakthrough curves.

Friendly strategy to prepare encoded one bead-one compound cyclic peptide library

One bead-one peptide libraries allow the screening of suitable ligands for any target protein. Short cyclic peptides are ideal ligands for affinity chromatography because of their high affinity and selectivity for the target protein and stability against proteases. We designed a library synthesis strategy to facilitate the identification of cyclic peptides by MS consisting of (a) sequential incorporation of a mixture of Fmoc-Ala-OH and Fmoc-Asp[2-phenylisopropyl (OPp)]-OH (15:85) to Gly-oxymethylbenzamide-ChemMatrix (Gly-HMBA-CM) resin, (b) synthesis of the combinatorial library on the resin by the divide-couple-recombine method, (c) removal of OPp with 4% TFA, (d) peptide cyclization on solid phase through side-chain Asp and amino terminus, and (e) removal of side chain protecting groups with a 95% TFA cocktail. Peptides were cleaved from the beads with ammonia and the linear code was sequenced by MALDI-TOF MS/MS. The high capacity of ChemMatrix resin together with the sensitivity of MS allows code sequencing from a single bead.

Affinity chromatography based on a combinatorial strategy for rerythropoietin purification

Small peptides containing fewer than 10 amino acids are promising ligand candidates with which to build affinity chromatographic systems for industrial protein purification. The application of combinatorial peptide synthesis strategies greatly facilitates the discovery of suitable ligands for any given protein of interest. Here we sought to identify peptide ligands with affinity for recombinant human erythropoietin (rhEPO), which is used for the treatment of anemia. A combinatorial library containing the octapeptides X-X-X-Phe-X-X-Ala-Gly, where X = Ala, Asp, Glu, Phe, His, Leu, Asn, Pro, Ser, or Thr, was synthesized on HMBA-ChemMatrix resin by the divide-couple-recombine method. For the library screening, rhEPO was coupled to either Texas Red or biotin. Fluorescent beads or beads showing a positive reaction with streptavidin-peroxidase were isolated. After cleavage, peptides were sequenced by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Fifty-seven beads showed a positive reaction. Peptides showing more consensuses were synthesized, and their affinity to rhEPO was assessed using a plasma resonance biosensor. Dissociation constant values in the range of 1-18 μM were obtained. The best two peptides were immobilized on Sepharose, and the resultant chromatographic matrixes showed affinity for rhEPO with dissociation constant values between 1.8 and 2.7 μM. Chinese hamster ovary (CHO) cell culture supernatant was spiked with rhEPO, and the artificial mixture was loaded on Peptide-Sepharose columns. The rhEPO was recovered in the elution fraction with a yield of 90% and a purity of 95% and 97% for P1-Sepharose and P2-Sepharose, respectively.