DNAzyme self-assembled gold nanoparticles for determination of metal ions using fluorescence anisotropy assay

A multifunctional fluorescent sensor for Ag+ and Hg2+ detection in seawater

In order to detect Ag+ and Hg2+ in seawater, we explored a multifunctional fluorescence sensor. A multifunctional Ag+ and Hg2+ sensor was designed by using gold nanoparticles (AuNPs) as quenching agent, PicoGreen dye as fluorescent probe of base pairing double-stranded deoxyribonucleic acid (DNA), and combining the characteristics of Ag+ making C base mismatch and Hg2+ making T base mismatch. Meanwhile, the DNA logic gate was constructed by establishing logic circuit, truth table, and logic formula. The relevant performances of the sensor were investigated. The results revealed that the sensor can detect Ag+ in the range of 100 to 700 nM with R2 = 0.98129, and its detection limit is 16.88 nM (3σ/slope). The detection range of Hg2+is 100-900 nM with R2 = 0.99725, and the detection limit is 5.59 nM (3σ/slope). An AND-AND-NOR-AND molecular logic gate has been successfully designed. With the characteristics of high sensitivity, multifunction, and low cost, the recommended detection method has the potential to be applied to the detection of Ag+ and Hg2+ in seawater.

A Novel Cu2+ Quantitative Detection Nucleic Acid Biosensors Based on DNAzyme and “Blocker” Beacon

In this paper, a “turn-off” biosensor for detecting copper (II) ions based on Cu2+-dependent DNAzyme and a “blocker” beacon were developed. Upon the copper ion being added, the Cu2+-dependent DNAzyme substrate strand was irreversibly cleaved, thereby blocking the occurrence of the ligation reaction and PCR, which inhibited the G-rich sequence from forming the G-quadruplex structure, efficiently reducing the detection signal. This method had the characteristics of strong specificity and high sensitivity compared with the existing method due to the application of ligation-dependent probe signal recognition and amplification procedures. Under the optimized conditions, this method proved to be highly sensitive. The signal decreased as the concentration of copper ions increased, exhibiting a linear calibration from 0.03125 μM to 0.5 μM and a limit of detection of 18.25 nM. Subsequently, the selectivity of this biosensor was verified to be excellent by testing different relevant metal ions. Furthermore, this detection system of copper (II) ions was successfully applied to monitor Cu2+ contained in actual water samples, which demonstrated the feasibility of the biosensor.

Recent advances in fluorescence anisotropy/polarization signal amplification

Fluorescence anisotropy/polarization is an attractive and versatile technique based on molecular rotation in biochemical/biophysical systems. Traditional fluorescence anisotropy/polarization assays showed relatively low sensitivity for molecule detection, because widespread molecular masses are too small to produce detectable changes in fluorescence anisotropy/polarization value. In this review, we discuss in detail how the potential of fluorescence anisotropy/polarization signal approach considerably expanded through the implementation of mass amplification, recycle the target amplification, fluorescence probes structure-switching amplification, resonance energy transfer amplification, and provide perspectives at future directions and applications.

A Novel Quinoline Derivative for Selective and Sensitive Visual Detection of PPB Level Cu2+ in an Aqueous Solution

Aim:

Selective and sensitive visual detection of Cu2+in aqueous solution at PPB level using easily synthesized compound.

Background:

The search for a chemosensor that can detect Cu2+ is very long owing to the fact that an optimum level of Cu2+ is required for human health and the recommended amount of Cu2+ in drinking water is set to be 1-2 mgL-1 . Thus, it is very important to detect Cu2+ even at a very low concentration to assess the associated health risks.

Objective:

We are still seeking for the easiest, cheapest, fastest and greenest sensor that can selectively, sensitively and accurately detect Cu2+ with lowest detection limit. Our objective of this work is to find one such Cu2+ sensor.

Methods:

We have synthesized a quinoline derivative following very easy synthetic procedures and characterize the compound by standard methods. For sensing study, we used steady state absorption and emission spectroscopy.

Results:

Our sensor can detect Cu2+ selectively and sensitively in aqueous solution instantaneously even in the presence of excess amount of other salts. The pale-yellow color of the sensor turns red on the addition of Cu2+ . There is no interference from other cations and anions. A 2:1 binding mechanism of the ligand with Cu2+ is proposed using Jobs plot with binding constant in the order of 109 M-2 . We calculated the LOD to be 18 ppb, which is quite low than what is permissible in drinking water.

Conclusion:

We developed a new quinoline based chemo-sensor following straightforward synthetic procedure from very cheap starting materials that can detect Cu2+ visually and instantaneously in aqueous solution with ppb level sensitivity and zero interference from other ions.

Cytotoxicity Induction by the Oxidative Reactivity of Nanoparticles Revealed by a Combinatorial GNP Library with Diverse Redox Properties

It is crucial to establish relationship between nanoparticle structures (or properties) and nanotoxicity. Previous investigations have shown that a nanoparticle's size, shape, surface and core materials all impact its toxicity. However, the relationship between the redox property of nanoparticles and their toxicity has not been established when all other nanoparticle properties are identical. Here, by synthesizing an 80-membered combinatorial gold nanoparticle (GNP) library with diverse redox properties, we systematically explored this causal relationship. The compelling results revealed that the oxidative reactivity of GNPs, rather than their other physicochemical properties, directly caused cytotoxicity via induction of cellular oxidative stress. Our results show that the redox diversity of nanoparticles is regulated by GNPs modified with redox reactive ligands.

Microfluidic particle accumulation for visual quantitation of copper ions

A portable biosensor has been developed based on microfluidic particle accumulation for visual quantification of copper ions. A copper-dependent DNAzyme is used to connect magnetic microparticles (MMPs) and polystyrene microparticles (PMPs), forming "MMPs-DNAzyme-PMPs." When copper ions are present, the DNAzyme is cleaved, allowing free PMPs to be released from the MMPs-DNAzyme-PMP complex. Using a capillary-flow-based microfluidic device, the MMPs-DNAzyme-PMPs are first separated by a magnetic chamber, allowing the free PMPs to continue flowing until being trapped at a particle dam with a narrowing nozzle. Therefore, as a thermometer-like display, the copper level can be visually quantified by the accumulation length of the free PMPs in the trapping microchannel. The limit of detection (LOD) is 33 nM determined by the linear range of 25-100 nM, which is 900 times lower than the prevalent standard (~30 μM) in Hong Kong. The system shows excellent selectivity (> 1000-folds) against other heavy metal ions and abilities to adapt to multiple water environmental conditions. Tests on tap water samples and three local natural water sources in Hong Kong manifest that the device can effectively monitor the quality of freshwater with >70% recovery and 26.16% RSD.

A label-free logic gate hairpin aptasensor for sensitive detection of ATP based on graphene oxide and PicoGreen dye

Background

In this paper, a simple, enzyme-free, label-free fluorescence, high sensitivity logic gate hairpin aptasensor was developed for adenosine triphosphate (ATP) detection based on graphene oxide (GO) and PicoGreen dye.

Methods

Using single-strand deoxyribonucleic acid (DNA) and adenosine triphosphate (ATP) as input signal and fluorescence signal as output signal, if single-strand DNA (DNA-L), single-strand DNA (DNA-S), and ATP were present at the same time, one segment of DNA-L formed a hairpin ring with ATP, and the other segment of DNA-L formed a completely complementary hairpin stem with DNA-S. The hairpin DNA was detached from the GO surface, and PicoGreen dye was embedded into the hairpin stem, and the fluorescence signal was enhanced. The molecular logic gate was constructed through the establishment of logic histogram, logic circuit, truth table, and logic formula. The biosensor-related performances including sensitivity, selectivity, and linearity were investigated, respectively.

Results

We have successfully constructed a AND logic gate. The detection limit of ATP is 138.0 pmol/L (3σ/slope) with detection range of 50–500 nmol/L (R2 = 0.98951), and its sensitivity is 4.748 × 106–6.875 × 108 a.u. (mol/L)−1.

Conclusions

The logic gate hairpin aptamer sensor has the advantages of high sensitivity, low detection limit, and low cost, and can be successfully applied to the detection of adenosine triphosphate (ATP) in actual human urine samples.

Fluorescence switch of gold nanoclusters stabilized with bovine serum albumin for efficient and sensitive detection of cysteine and copper ion in mice with Alzheimer's disease

The near-infrared fluorescence of gold nanoclusters stabilized with bovine serum albumin (BSA -AuNCs) centered at 675 nm could be enhanced by cysteine and then effectively quenched by copper ion (Cu²⁺), therefore, cysteine and copper ion could be detected in sequence. At "on" state, fluorescence enhancement of BSA-AuNCs is generated due to the reaction between cysteine and BSA-AuNCs, via filling the surface defect of gold nanoclusters, while Cu²⁺ can further oxidize the reductive sulfydryl of cysteine and interact with amino acids presented in the BSA chain, inducing gold nanoclusters to aggregate, thus causing "off" state with fluorescence quenching. Fluorescence switch of BSA-AuNCs can be used for cysteine and Cu²⁺ detection in mice brain with Alzheimer's disease (AD) in vitro, with fast response, high chemical stability and sensitivity. Besides, it was able to image the endogenous Cu²⁺ in liver and heart of AD mice in situ. The results are promising, especially in the framework of early diagnosis of Alzheimer's disease.

A near-infrared-II fluorescence anisotropy strategy for separation-free detection of adenosine triphosphate in complex media

Fluorescence anisotropy (FA) has been widely applied for detecting and monitoring special targets in life sciences. However, matrix autofluorescence restricted its further application in complex biological samples. Herein, we report a near-infrared-II (NIR-II) FA strategy for detecting adenosine triphosphate (ATP) in human serum samples and breast cancer cell lysate, which employed NIR-II fluorescent Ag₂Se quantum dots (QDs) as tags to reduce matrix autofluorescence effect and applied graphene oxide (GO) to enhance fluorescence anisotropy signals. In the presence of ATP, the recognition between NIR-II Ag₂Se QDs labeled aptamer (QD-pDNA) and ATP led to the release of QD-pDNA from GO, resulting in the obvious decrease of FA values. ATP could be quantitatively detected in concentrations ranged from 3 nM to 2500 nM, with a detection limit down to 1.01 nM. This study showed that the developed NIR-II FA strategy could be applied for detecting targets in complex biological samples and had great potential for monitoring interactions between biomolecules in biomedical research.

DNA nanosheet as an excellent fluorescence anisotropy amplification platform for accurate and sensitive biosensing

Recently, various inorganic nanomaterials have been used as fluorescence anisotropy (FA) enhancers for biosensing successfully. However, most of them are size-uncontrollable and possess an intensive fluorescence quenching ability, which will seriously reduce the accuracy and sensitivity of FA method. Herein, we report a two-dimensional DNA nanosheet (DNS) without fluorescence quenching effect as a novel FA amplification platform. In our strategy, fluorophore-labeled probe DNA (pDNA) is linked onto the DNS surface through the hybridization with the handle DNA (hDNA) that extended from the DNS, resulting in the significantly enhanced FA value. After the addition of target, the pDNA was released from the DNS surface due to the high affinity between the hDNA and target, and the FA was decreased. Thus, target could be detected by the significantly decreased FA value. The linear range was 10-50 nM and the limit of detection was 8 nM for the single-stranded DNA detection. This new method is general and has been also successfully applied for the detection of ATP and thrombin sensitively. Our method improved the accuracy of FA assay and has great potential to detect series of biological analytes in complex biosensing systems.

A Label-Free Fluorescent DNA Machine for Sensitive Cyclic Amplification Detection of ATP

In this study, a target recycled amplification, background signal suppression, label-free fluorescent, enzyme-free deoxyribonucleic acid (DNA) machine was developed for the detection of adenosine triphosphate (ATP) in human urine. ATP and DNA fuel strands (FS) were found to trigger the operation of the DNA machine and lead to the cyclic multiplexing of ATP and the release of single stranded (SS) DNA. Double-stranded DNA (dsDNA) was formed on graphene oxide (GO) from the combination of SS DNA and complementary strands (CS′). These double strands then detached from the surface of the GO and in the process interacted with PicoGreen dye resulting in amplifying fluorescence intensity. The results revealed that the detection range of the DNA machine is from 100 to 600 nM (R² = 0.99108) with a limit of detection (LOD) of 127.9 pM. A DNA machine circuit and AND-NOT-AND-OR logic gates were successfully constructed, and the strategy was used to detect ATP in human urine. With the advantage of target recycling amplification and GO suppressing background signal without fluorescent label and enzyme, this developed strategy has great potential for sensitive detection of different proteins and small molecules.

A Label-Free Fluorescent AND Logic Gate Aptasensor for Sensitive ATP Detection

In this study, a label-free fluorescent, enzyme-free, simple, highly sensitive AND logic gate aptasensor was developed for the detection of adenosine triphosphate (ATP). Double-stranded deoxyribonucleic acid (DNA) with cohesive ends was attached to graphene oxide (GO) to form an aptasensor probe. ATP and single-stranded DNA were used as input signals. Fluorescence intensity of PicoGreen dye was used as an output signal. The biosensor-related performances, including the logic gate construction, reaction time, linearity, sensitivity, and specificity, were investigated and the results showed that an AND logic gate was successfully constructed. The ATP detection range was found to be 20 to 400 nM (R² = 0.9943) with limit of detection (LOD) of 142.6 pM, and the sensitivity range was 1.846 × 10⁶ to 2.988 × 10⁶ M^-1. This method for the detection of ATP has the characteristics of being simple, low cost, and highly sensitive.

A Label-Free Fluorescent DNA Calculator Based on Gold Nanoparticles for Sensitive Detection of ATP

Herein we described a deoxyribonucleic acid (DNA) calculator for sensitive detection of the determination of adenosine triphosphate (ATP) using gold nanoparticles (GNP) and PicoGreen fluorescence dye as signal transducer, and ATP and single-stranded DNA (DNA-M′) as activators. The calculator-related performances including linearity, reaction time, logic gate, and selectivity were investigated, respectively. The results revealed that this oligonucleotide sensor was highly sensitive and selective. The detection range was 50–500 nmol/L (R² = 0.99391) and the detection limit was 46.5 nmol/L. The AND DNA calculator was successfully used for the ATP detection in human urine. Compared with other methods, this DNA calculator has the characteristics of being label-free, non-enzymic, simple, and highly sensitive.

Sentinel Wraps: Real-Time Monitoring of Food Contamination by Printing DNAzyme Probes on Food Packaging

Here, we report the development of a transparent, durable, and flexible sensing surface that generates a fluorescence signal in the presence of a specific target bacterium. This material can be used in packaging, and it is capable of monitoring microbial contamination in various types of food products in real time without having to remove the sample or the sensor from the package. The sensor was fabricated by covalently attaching picoliter-sized microarrays of an E. coli-specific RNA-cleaving fluorogenic DNAzyme probe (RFD-EC1) to a thin, flexible, and transparent cyclo-olefin polymer (COP) film. Our experimental results demonstrate that the developed (RFD-EC1)-COP surface is specific, stable for at least 14 days under various pH conditions (pH 3-9), and can detect E. coli in meat and apple juice at concentrations as low as 10³ CFU/mL. Furthermore, we demonstrate that our sensor is capable of detecting bacteria while still attached to the food package, which eliminates the need to manipulate the sample. The developed biosensors are stable for at least the shelf life of perishable packaged food products and provide a packaging solution for real-time monitoring of pathogens. These sensors hold the potential to make a significant contribution to the ongoing efforts to mitigate the negative public-health-related impacts of food-borne illnesses.

Panoply of Fluorescence Polarization/Anisotropy Signaling Mechanisms for Functional Nucleic Acid-Based Sensing Platforms

Fluorescence polarization/anisotropy is a very popular technique that is widely used in homogeneous-phase immunoassays for the small molecule quantification. In the present Feature, we discuss how the potential of this signaling approach considerably expanded during the last 2 decades through the implementation of a myriad of original transducing strategies that use functional nucleic acid recognition elements as a promising alternative to antibodies.

Ultrasensitive detection of nucleic acids based on dually enhanced fluorescence polarization

Increase of the molecular volume and quenching effect induced by AuNP conjugation can both enhance the fluorescence polarization of Alexa488.

Highly selective and sensitive method for Cu2+ detection based on chiroptical activity of L-Cysteine mediated Au nanorod assemblies

Herein, we demonstrated a simple and efficient method to detect Cu²⁺ based on amplified optical activity in the chiral nanoassemblies of gold nanorods (Au NRs). L-Cysteine can induce side-by-side or end-to-end assembly of Au NRs with an evident plasmonic circular dichroism (PCD) response due to coupling between surface plasmon resonances (SPR) of Au NRs and the chiral signal of L-Cys. Because of the obvious stronger plasmonic circular dichrosim (CD) response of the side-by-side assembly compared with the end-to-end assemblies, SS assembled Au NRs was selected as a sensitive platform and used for Cu²⁺ detection. In the presence of Cu²⁺, Cu²⁺ can catalyze O₂ oxidation of cysteine to cystine. With an increase in Cu²⁺ concentration, the L-Cysteine-mediated assembly of Au NRs decreased because of decrease in the free cysteine thiol groups, and the PCD signal decreased. Taking advantage of this method, Cu²⁺ could be detected in the concentration range of 20pM-5nM. Under optimal conditions, the calculated detection limit was found to be 7pM.

Fluorescent nanoprobes for sensing and imaging of metal ions: recent advances and future perspectives

Recent advances in nanoscale science and technology have generated nanomaterials with unique optical properties. Over the past decade, numerous fluorescent nanoprobes have been developed for highly sensitive and selective sensing and imaging of metal ions, both in vitro and in vivo. In this review, we provide an overview of the recent development of the design and optical properties of the different classes of fluorescent nanoprobes based on noble metal nanomaterials, upconversion nanoparticles, semiconductor quantum dots, and carbon-based nanomaterials. We further detail their application in the detection and quantification of metal ions for environmental monitoring, food safety, medical diagnostics, as well as their use in biomedical imaging in living cells and animals.

Exonuclease III-assisted graphene oxide amplified fluorescence anisotropy strategy for ricin detection

Graphene oxide (GO) is an excellent fluorescence anisotropy (FA) amplifier. However, in the conventional GO amplified FA strategy, one target can only induce the FA change of one fluorophore on probe, which limits the detection sensitivity. Herein, we developed an exonuclease III (Exo III) aided GO amplified FA strategy by using aptamer as an recognition element and ricin B-chain as a proof-of-concept target. The aptamer was hybridized with a blocker sequence and linked onto the surface of magnetic beads (MBs). Upon the addition of ricin B-chain, blocker was released from the surface of MBs and hybridized with the dye-modified probe DNA on the surface of GO through the toehold-mediated strand exchange reaction. The formed blocker-probe DNA duplex triggered the Exo III-assisted cyclic signal amplification by repeating the hybridization and digestion of probe DNA, liberating the fluorophore with several nucleotides (low FA value). Thus, ricin B-chain could be sensitively detected by the significantly decreased FA. The linear range was from 1.0μg/mL to 13.3μg/mL and the limit of detection (LOD) was 400ng/mL. This method improved the sensitivity of FA assay and it could be generalized to any kind of target detection based on the use of an appropriate aptamer.

DNAzyme-based biosensor for Cu(2+) ion by combining hybridization chain reaction with fluorescence resonance energy transfer technique

A novel signal amplification strategy based on Cu(2+)-dependent DNAzyme was developed for sensing Cu(2+) ion by combining hybridization chain reaction (HCR) with fluorescence resonance energy transfer (FRET) technique. In the presence of Cu(2+) ion, the substrate strands of Cu(2+)-dependent DNAzyme immobilized on magnetic beads were specifically cleaved and released. The released strands initiated the HCR process of hairpin H1 and H2 labeled with FAM as the donor and TAMRA as the acceptor, respectively. Long nicked dsDNA structures were self-assembled to bring the donor and the acceptor in close proximity, resulting in a FRET process. The relative ratio of fluorescent intensities of the acceptor and donor was used to quantitatively detect Cu(2+) ion with a limit of detection of 0.5nmolL(-1). This proposed biosensor was applied to detect Cu(2+) ion in tap water with satisfactory results.

Highly sensitive and selective “naked eye” sensing of Cu(ii) by a novel amido–imine based receptor: a spectrophotometric and DFT study with practical application

Synthesis of (E)-bis-N'-((1H-pyrrol-2-yl)-methylene)-pyridine-2,6-carbohydrazide and its sensing ability towards copper(ii) ion in aqueous medium by color change, the sensing limit being 4.0 × 10⁻⁹ M.

DNAzyme-based biosensors and nanodevices

DNAzymes, screened through in vitro selection, have shown great promise as molecular tools in the design of biosensors and nanodevices. The catalytic activities of DNAzymes depend specifically on cofactors and show multiple enzymatic turnover properties, which make DNAzymes both versatile recognition elements and outstanding signal amplifiers. Combining nanomaterials with unique optical, magnetic and electronic properties, DNAzymes may yield novel fluorescent, colorimetric, surface-enhanced Raman scattering (SERS), electrochemical and chemiluminescent biosensors. Moreover, some DNAzymes have been utilized as functional components to perform arithmetic operations or as "walkers" to move along DNA tracks. DNAzymes can also function as promising therapeutics, when designed to complement target mRNAs or viral RNAs, and consequently lead to down-regulation of protein expression. This feature article focuses on the most significant achievements in using DNAzymes as recognition elements and signal amplifiers for biosensors, and highlights the applications of DNAzymes in logic gates, DNA walkers and nanotherapeutics.

Graphene oxide amplified fluorescence anisotropy for label-free detection of potassium ion

A label-free fluorescence anisotropy method for the sensitive detection of potassium ion, by using graphene oxide as enhancer, was established.

A novel graphene oxide amplified fluorescence anisotropy assay with improved accuracy and sensitivity

A novel and versatile graphene oxide (GO) amplified fluorescence anisotropy (FA) strategy with improved accuracy and sensitivity has been successfully developed.

The rapid detection of microRNA based on p19-enhanced fluorescence polarization

Via a molecular caliper p19 protein, we have developed an amplified fluorescence polarization method for rapid microRNA detection. This proposed assay has several intrinsic features including rapidity, simplicity, and accuracy.

DNA as sensors and imaging agents for metal ions

Increasing interest in detecting metal ions in many chemical and biomedical fields has created demands for developing sensors and imaging agents for metal ions with high sensitivity and selectivity. This review covers recent progress in DNA-based sensors and imaging agents for metal ions. Through both combinatorial selection and rational design, a number of metal-ion-dependent DNAzymes and metal-ion-binding DNA structures that can selectively recognize specific metal ions have been obtained. By attachment of these DNA molecules with signal reporters such as fluorophores, chromophores, electrochemical tags, and Raman tags, a number of DNA-based sensors for both diamagnetic and paramagnetic metal ions have been developed for fluorescent, colorimetric, electrochemical, and surface Raman detection. These sensors are highly sensitive (with a detection limit down to 11 ppt) and selective (with selectivity up to millions-fold) toward specific metal ions. In addition, through further development to simplify the operation, such as the use of "dipstick tests", portable fluorometers, computer-readable disks, and widely available glucose meters, these sensors have been applied for on-site and real-time environmental monitoring and point-of-care medical diagnostics. The use of these sensors for in situ cellular imaging has also been reported. The generality of the combinatorial selection to obtain DNAzymes for almost any metal ion in any oxidation state and the ease of modification of the DNA with different signal reporters make DNA an emerging and promising class of molecules for metal-ion sensing and imaging in many fields of applications.