SYBR green dye-based probe-free SNP genotyping: introduction of T-Plex real-time PCR assay

Screening and validation of double allele-specific binding F-primers for the measurement of antihypertensive pharmacogenomics

Objective

Previous studies have proposed that genetic polymorphisms of CYP2D6*10, ADRB1, NPPA, CYP3A5*3, ACE, CYP2C9*3, and AGTR1 are involved in antihypertensive pharmacogenomics. The purpose of this study is to develop an amplification analysis using double allele-specific (AS) binding primers for accurate measurement of antihypertensive pharmacogenomics.

Methods

To establish a quadruplex quantitative PCR (qPCR) analysis for genotyping of CYP2D6*10, ADRB1 (1165 G>C), NPPA (2238 T>C) and CYP3A5*3, and a triplex qPCR analysis for genotyping of ACE (I/D), CYP2C9*3 and AGTR1 (1166 A>C), mismatch AS F-primers were screened by detection of plasmid/gDNA, and were validated by agreement analysis/reproducibility evaluation, in which the ΔCq (differences in threshold cycles between the wild-type F-primer-based amplification assay and the mutant-type F-primer-based amplification assay) was employed to determine genotypes.

Results

Seven pairs of primers were successfully selected through three rounds of F-primers screening. Except for ADRB1, the robustness assessment showed the amplification efficiency ranging from 0.9 to 1.1. In agreement analysis, two specimens in the training set (n = 203) were defined by the triplex analysis rather than NGS as heterozygotes for ACE, which was evidenced by gel electrophoresis. Reproducibility evaluation demonstrated that the coefficient of variation (CV) was <5%.

Conclusion

Multiplex amplification analysis using screened AS binding primers is a simple, reliable, and accurate tool to guide drug delivery in antihypertensive personalized treatment.

Comparison of Antibiotic Resistance Profiles of Salmonella Isolates from Retail Meats in Nanchang, China, in Two Periods

Salmonella is one of the most important foodborne pathogens. In this article, a total of 160 Salmonella isolates recovered from retail meats in June-July 2018 (before COVID-19 outbreak) and December 2020-April 2021 (after COVID-19 outbreak) in Nanchang, China, were characterized for serotyping, antimicrobial susceptibility, and specific resistance gene screening. The prevalence of Salmonella Typhimurium increased from 5.4% in 2018 to 19.1% in 2021, and Salmonella Enteritidis increased from 3.3% in 2018 to 8.8% in 2021. Compared with those in June-July 2018, Salmonella isolates in December 2020-April 2021 demonstrated a significant increase in resistance to 13 tested antibiotics except for doxycycline and nitrofurantoin (p < 0.05). The Salmonella isolates in December 2020-April 2021 showed a higher presence of plasmid-mediated quinolone resistance genes (qnrA, qnrB, and qnrS), and mutations in the quinolone resistance-determining region (gyrA Asp87Asn, gyrA Asp87Tyr, parC Thr57Ser, and parC Ser80Ile). Whole-genome sequencing was used to analyze four polymyxin B-resistant strains. Some common mutation sites in eptC and micA were found in the four strains. Based on the data in this article, it indicated that antibiotic resistance was facilitated and more gene mutations related to quinolone resistance were developed.

Development of an Optimized Tetra-Amplification Refractory Mutation System PCR for Detection of 12 Pathogenic Familial Hypercholesterolemia Variants in the Asian Population

Early detection of genetic diseases such as familial hypercholesterolemia (FH), and the confirmation of related pathogenic variants, are crucial in reducing the risk for premature coronary artery disease. Currently, next-generation sequencing is used for detecting FH-related candidate genes but is expensive and time-consuming. There is a lack of kits suitable for the detection of the common FH-related variants in the Asia-Pacific region. Thus, this study addressed that need with the development of an optimized tetra-amplification mutation system (T-ARMS) PCR-based assay for the detection of 12 pathogenic variants of FH in the Asian population. The two important parameters for T-ARMS PCR assay performance-annealing temperature and the ratio of outer/inner primer concentrations-were optimized in this study. The optimal annealing temperature of all 12 T-ARMS PCR reactions was 64.6°C. The ideal ratios of outer/inner primer concentrations with each pathogenic variant were: A1, 1:2; A2, 1:4; L1, 1:10; L2, 1:1; L3, 1:2; L4, 1:8; L5, 1:1; L6, 1:2; L7, 1:8; L8, 1:8; L9, 1:2; and L10, 1:8. The lowest limit of detection using DNA extracted from patients was 0.1 ng. The present article highlights the beneficial findings on T-ARMS PCR as part of the development of a PCR-based detection kit for use in detecting FH in economically developing countries in Asia with a greater prevalence of FH.

Design and characterization of a SYBR Green I-based melting curve method for investigation of HER2I655V polymorphism in breast cancer

Background

Breast cancer is a disease in which cell grows rapidly forming a mass in the breast. HER2 polymorphisms Ile655Val have been studied as biomarkers for breast cancer and may comprise a risk factor of cardiac toxicity for breast cancer-consuming trastuzumab. Aim of work: In this study, we developed a simple, low cost, and rapid test to detect polymorphism at HER2 gene using SYBR Green I-based melting curve method.

Subjects and methods

In this report, we performed allelic discrimination with real-time temperature melting (Tm) Shift SYBR Green I-based melting curve method. The melting profiles of amplified DNA HER-2 Ile655Val and its characteristics were analyzed.

Result

Tm value of HER2 GG and AA alleles were 85 ± 0.14 °C and 82.5 ± 0.23 °C, respectively, while cycle threshold (Ct) value of GG, AG, and AA alleles were 19.6 ± 0.27, 22.5 ± 0.23, 18.6 ± 0.22 correspondingly; furthermore, no template control has shown consisting Ct value at 31.18 ± 0.27. The developed methods’ characteristics were optimum annealing at 62 °C and Kappa coefficient value 1 with the mean almost consistent with PCR-sequencing. The coefficient of variability for intra-assay of GG, AG, and AA was in the range of 0.2–1%, while the coefficient of variability for inter-assay for each were in the range 0.7–1%. Further, based on PCR, shelf-life assay has shown stability for 3 months of storage observation.

Conclusion

This approach may be considered as simple, rapid, and low cost supporting the rapid study of HER2 epidemiology. Furthermore, the developed methods potentially facilitate clinicians in dealing with breast cancer patients, especially in considering about the cardiotoxicity effect of trastuzumab.

Fluorescence-based quantitative platform for ultrasensitive food allergen detection: From immunoassays to DNA sensors

Food allergies are global health issue with an increasing prevalence that affect food safety; hence, food allergen detection, labeling, and management are considered to be important priorities in the food industry. In this critical review, we provide a comprehensive overview of several fluorescence-based platforms based on different biorecognition ligands, such as antibodies, DNA, aptamers, and cells, for food allergen quantification. Traditional analytical methods are generally unsuitable for food manufacturers to accomplish the real-time identification of food allergens in food products. Therefore, it is important to develop simple, rapid, inexpensive, accurate, and sensitive methods to improve user accessibility. A fluorescence-based quantitative platform provides an excellent detection platform for food allergens because of its high sensitivity. This review summarizes the traditional antibody-based fluorescent techniques for food allergen detection, such as the time-resolved fluoroimmunoassay , immunofluorescence imaging, fluorescence enzyme-linked immune sorbent assay, flow injection fluoroimmunoassay, and fluorescence immunosensors. However, these methods suffer from disadvantages such as the significant rate of false-positive and false-negative results due to antibody cross-reactivity with nontarget food components in the complex food matrix and epitope degradation during food processing. Hence, different types of fluorescence-based immunoassays are suitable for standardization and quantification of allergens in fresh foods. In addition, we summarize new fluorescence-based quantitative platforms, including fluorescence genosensors, fluorescence cell sensors, and fluorescence aptamer sensors. With the advantages of high sensitivity and simple operation, fluorescence biosensors will have great potential in the future and could provide portable methods for multiallergen real-time detection in complex food systems.

A strategy for preparing non-fluorescent graphene oxide quantum dots as fluorescence quenchers in quantitative real-time PCR

In recent years, graphene oxide quantum dots (GOQDs) have emerged as novel nanomaterials for optical sensing, bioimaging, clinical testing, and environmental testing. However, GOQDs demonstrate unique photoluminescence properties, with GOQDs having quantum limitations and edge effects that often affect the accuracy of the test results in the sensory field. Herein, GOQDs with a large content of hydroxyl groups and low fluorescence intensity were first prepared via an improved Fenton reaction in this study, which introduces a large amount of epoxy groups to break the C-C bonds. The synthesized GOQDs show no significant variation in the fluorescence intensity upon ultraviolet and visible light excitations. We further utilized the GOQDs as fluorescence quenchers for different fluorescent dyes in real-time fluorescence quantitative polymerase chain reaction (qRT-PCR), and verified that the addition of GOQDs (5.3 μg ml-1) into a qRT-PCR system could reduce the background fluorescence intensity of the reaction by fluorescence resonance energy transfer (FRET) during its initial stage and its non-specific amplification, and improve its specificity. In addition, the qRT-PCR method could detect two different lengths of DNA sequences with a high specificity in the 104 to 1010 copies per μl range. It is of paramount importance to carry out further investigations to establish an efficient, sensitive, and specific RT-PCR method based on the use of GOQD nanomaterials as fluorescence quenchers.

GLADS: A gel-less approach for detection of STMS markers in wheat and rice

Sequence tagged microsatellite site (STMS) are useful PCR based DNA markers. Wide genome coverage, high polymorphic index and co-dominant nature make STMS a preferred choice for marker assisted selection (MAS), genetic diversity analysis, linkage mapping, seed genetic purity analysis etc. Routine STMS analysis involving low-throughput, laborious and time-consuming polyacrylamide/agarose gels often limit their full utility in crop breeding experiments that involve large populations. Therefore, convenient, gel-less marker detection methods are highly desirable for STMS markers. The present study demonstrated the utility of SYBR Green dye based melt-profiling as a simple and convenient gel-less approach for detection of STMS markers (referred to as GLADS) in bread wheat and rice. The method involves use of SYBR Green dye during PCR amplification (or post-PCR) of STMS markers followed by generation of a melt-profile using controlled temperature ramp rate. The STMS amplicons yielded characteristic melt-profiles with differences in melting temperature (Tm) and profile shape. These characteristic features enabled melt-profile based detection and differentiation of STMS markers/alleles in a gel-less manner. The melt-profile approach allowed assessment of the specificity of the PCR assay unlike the end-point signal detection assays. The method also allowed multiplexing of two STMS markers with non-overlapping melt-profiles. In principle, the approach can be effectively used in any crop for STMS marker analysis. This SYBR Green melt-profiling based GLADS approach offers a convenient, low-cost (20-51%) and time-saving alternative for STMS marker detection that can reduce dependence on gel-based detection, and exposure to toxic chemicals.

Monitoring the Transcriptional Activity of Human Endogenous Retroviral HERV-W Family Using PNA Strand Invasion into Double-Stranded DNA

In the presented assay, we elaborated a method for distinguishing sequences that are genetically closely related to each other. This is particularly important in a situation where a fine balance of the allele abundance is a point of research interest. We developed a peptide nucleic acid (PNA) strand invasion technique for the differentiation between multiple sclerosis-associated retrovirus (MSRV) and ERVWE1 sequences, both molecularly similar, belonging to the human endogenous retrovirus HERV-W family. We have found that this method may support the PCR technique in screening for minor alleles which, in certain conditions, may be undetected by the standard PCR technique. We performed the analysis of different ERVWE1 and MSRV template mixtures ranging from 0 to 100% of ERVWE1 in the studied samples, finding the linear correlation between template composition and signal intensity of final reaction products. Using the PNA strand invasion assay, we were able to estimate the relative ERVWE1 expression level in human specimens such as U-87 MG, normal human astrocytes cell lines and placental tissue. The results remained in concordance with those obtained by semi-quantitative or quantitative PCR.

A label-free fluorescence method for detection of ureC gene and diagnosis of Helicobacter pylori infection

The feasibility of using a polymerase chain reaction (PCR)-based label-free DNA sensor for the detection of Helicobacter pylori is investigated. In particular, H. pylori ureC gene, a specific H. pylori nucleic acid sequence, was selected as the target sequence. In the presence of ureC gene, the target DNA could be amplified to dsDNA with much higher detectable levels. After added the SYBR green I (SGI), the sensing system could show high fluorescence. Thus, the target DNA can be detected by monitoring the change of fluorescence intensity of sensing system. The clinical performance of this method was determined by comparing it with another conventional technique urea breath test (UBT). The result also showed good distinguishing ability between negative and positive patient, which was in good agreement with that obtained by the UBT. It suggests that the label-free fluorescence-based method is more suitable for infection confirmation test of H. pylori. This approach offers great potential for simple, sensitive and cost-effective identification of H. pylori infection.

Genotype-specific real-time PCR combined with high-resolution melting analysis for rapid identification of red-spotted grouper nervous necrosis virus

A real-time genotype-specific polymerase chain reaction (PCR) assay combined with high-resolution melting (HRM) analysis was developed to assess the most common genotypes of nervous necrosis viruses or nodaviruses. Nodaviruses are the causal agents of viral nervous necrosis infections, which have been wreaking havoc in the aquaculture industry worldwide, with fish mortality up to 100%. The four different genotypes of nodaviruses correlate with differences in viral pathogenicity. Therefore, rational development of effective vaccines and diagnostics requires analysis of genetic variation among viruses. The aim of the present study was to develop a real-time tetra-primer genotype-specific PCR assay for genotype identification. Four primers were utilized for simultaneous amplification of nodavirus genotype-specific products in a single closed-tube PCR after a reverse-transcription reaction using RNA isolated from fish samples. For high-throughput sample analysis, SYBR Green-based real-time PCR was used in combination with HRM analysis. The assay was evaluated in terms of specificity and sensitivity. The analysis resulted in melting curves that were indicative of each genotype. The detection limit when using reference plasmids was 100 ag/µL for both genotypes, while the sensitivity of the assays when testing a complex mixture was 10 fg/µL for red-spotted grouper nervous necrosis virus (RGNNV) and 100 fg/µL for striped jack nervous necrosis virus (SJNNV). To test the capability of this method under real-world conditions, 58 samples were examined. All samples belonged to the RGNNV genotype, which was fully validated. The results were in full agreement with genotyping by reference methods. The proposed methodology provides a rapid, sensitive, specific, robust and automatable assay for nodavirus genotyping, making it a useful tool for diagnosis and screening for epidemiological studies.

Modified low cost SNP genotyping technique using cycle threshold (Ct) & melting temperature (Tm) values in allele specific real-time PCR

Background & objectives:

Genotyping has now become one of the major diagnostic means for almost all diseases. Among the advanced techniques that are used to study single nucleotide polymorphisms (SNPs), only a few are applicable for routine disease diagnosis. Their applicability mainly depends on three factors: cost, time, and accuracy. The primary objective of this study was to propose allele-specific real-time PCR as a rapid, low cost and simple genotyping method for routine diagnostics.

Methods:

Two SNPs, rs3014866 and rs2149356 were analysed using allele-specific real-time PCR. The polymerase chain reaction was carried out using RealQ PCR master mix containing SYBR Green DNA I dye followed by melt curve analysis. The results were validated by agarose gel electrophoresis and DNA sequencing.

Results:

The allelic discrimination and zygosity of the two SNPs were assessed by combined cycle threshold (Ct) and melting temperature (T_m) values. Variations in Ct and T_m values among the two alleles were observed in both rs3014866 (Ct: C allele - 24±1, T allele - 27±1; T_m: C allele - 82.5±0.3, T allele - 86.3±0.2) and rs2149356 (Ct: C allele - 24±1, A allele - 26±1; T_m: C allele - 79.4±0.2, A allele - 80.4±0.3). Based on the variations, homozygous and heterozygous alleles were detected. Agarose gel electrophoresis and DNA sequencing also confirmed the allelic variation and zygosity observed in real-time PCR.

Interpretation & conclusions:

In diagnostic settings where a large number of samples are analysed daily, allele-specific real-time PCR assay may serve as a simple, low cost and efficient method of genotyping.

Microwave-assisted digestion combined with silica-based spin column for DNA isolation from human bones

A protocol for the extraction of DNA from ancient skeletal material was developed. Bone specimen samples (powder or slice), buffer, pretreatment, and extraction methodologies were compared to investigate the best conditions yielding the highest concentration of DNA. The degree of extract contamination by polymerase chain reaction (PCR) inhibitors was compared as well. Pretreatment was carried out using agitation in an incubator shaker and microwave digestion. Subsequently, DNA from bones was isolated by the classical organic phenol-chloroform extraction and silica-based spin columns. Decalcification buffer for total demineralization was required as well as lysis buffer for cell lysis to obtain DNA, whereas microwave-assisted digestion proved to be very rapid, with an incubation time of 2min instead of 24h at an incubator shaker without using lysis buffer. The correction of isolated DNA was detected using real-time PCR with melt curve analysis, which was 82.8±0.2°C for highly repetitive α-satellite gene region specific for human chromosome 17 (locus D17Z1). Consequently, microwave-based DNA digestion followed by silica column yielded a high-purity DNA with a concentration of 19.40ng/μl and proved to be a superior alternative to the phenol-chloroform method, presenting an environmentally friendly and efficient technique for DNA extraction.

Development and validation of a tetra-primer amplification refractory mutation system-polymerase chain reaction combined with melting analysis-assay for clinical JAK2 V617F mutation detection

BACKGROUND AND OBJECTIVE

JAK2 V617F mutation is a molecular marker for myeloproliferative neoplasms (MPNs). As there are no China Food and Drug Administration-approved assays for the detection of JAK2 V617F mutation in China, validation of the analytic performance of this assay is important for the clinical laboratory before its clinical implementation. We have established a method for detecting JAK2 V617F using tetra-primer amplification refractory mutation system-polymerase chain reaction (tetra-primer ARMS-PCR) combined with melting-curve analysis.

METHODS

A total of 202 blood samples and 20 bone marrow aspirates were obtained from MPNs patients at Huashan Hospital, Fudan University. The accuracy, precision, reproducibility, analytical sensitivity, lower limit of detection, analytical specificity, interfering substances, ruggedness, robustness, reportable range and reporting of this assay were validated.

RESULTS

There was a close agreement between the reference method (sequencing) and melting-curve analysis (κ = 0.89). The precision was 100 % and the results of the assay were unaffected by lipoprotein (<27 mmol/L) or bilirubin (<450 µmol/L). The analytical sensitivity of the JAK2 mutation was 1.25 %.

CONCLUSIONS

Tetra-primer amplification refractory mutation system-polymerase chain reaction (tetra-primer ARMS-PCR) combined with melting-curve analysis can be used in the clinical laboratory for detection of the JAK2 V617F mutation.

On-chip detection of a single nucleotide polymorphism without polymerase amplification

A nanoparticle-assembled photonic crystal (PC) array was used to detect single nucleotide polymorphism (SNP). The assay platform with PC nanostructure enhanced the fluorescent signal from nanoparticle-hybridized DNA complexes due to phase matching of excitation and emission. Nanoparticles coupled with probe DNA were trapped into nanowells in an array by using an electrophoretic particle entrapment system. The PC/DNA assay platform was able to identify a 1 base pair (bp) difference in synthesized nucleotide sequences that mimicked the mutation seen in a feline model of human autosomal dominant polycystic kidney disease (PKD) with a sensitivity of 0.9 fg/mL (50 aM)-sensitivity, which corresponds to 30 oligos/array. The reliability of the PC/DNA assay platform to detect SNP in a real sample was demonstrated by using genomic DNA (gDNA) extracted from the urine and blood of two PKD^- wild type and three PKD positive cats. The standard curves for PKD positive (PKD⁺) and negative (PKD^-) DNA were created using two feline-urine samples. An additional three urine samples were analyzed in a similar fashion and showed satisfactory agreement with the standard curve, confirming the presence of the mutation in affected urine. The limit of detection (LOD) was 0.005 ng/mL which corresponds to 6 fg per array for gDNA in urine and blood. The PC system demonstrated the ability to detect a number of genome equivalents for the PKD SNP that was very similar to the results reported with real time polymerase chain reaction (PCR). The favorable comparison with quantitative PCR suggests that the PC technology may find application well beyond the detection of the PKD SNP, into areas where a simple, cheap and portable nucleic acid analysis is desirable.