Mono-N-acyl-2,6-diaminopimelic acid derivatives: Analysis by electromigration and spectroscopic methods and examination of enzyme inhibitory activity

N α -acetyl-L-ornithine deacetylase from Escherichia coli and a ninhydrin-based assay to enable inhibitor identification

Bacteria are becoming increasingly resistant to antibiotics, therefore there is an urgent need for new classes of antibiotics to fight antibiotic resistance. Mammals do not express N ɑ -acetyl-L-ornithine deacetylase (ArgE), an enzyme that is critical for bacterial survival and growth, thus ArgE represents a promising new antibiotic drug target, as inhibitors would not suffer from mechanism-based toxicity. A new ninhydrin-based assay was designed and validated that included the synthesis of the substrate analog N 5, N 5-di-methyl N α-acetyl-L-ornithine (kcat/Km = 7.32 ± 0.94 × 104 M-1s-1). This new assay enabled the screening of potential inhibitors that absorb in the UV region, and thus is superior to the established 214 nm assay. Using this new ninhydrin-based assay, captopril was confirmed as an ArgE inhibitor (IC50 = 58.7 μM; Ki = 37.1 ± 0.85 μM), and a number of phenylboronic acid derivatives were identified as inhibitors, including 4-(diethylamino)phenylboronic acid (IC50 = 50.1 μM). Selected inhibitors were also tested in a thermal shift assay with ArgE using SYPRO Orange dye against Escherichia coli ArgE to observe the stability of the enzyme in the presence of inhibitors (captopril Ki = 35.9 ± 5.1 μM). The active site structure of di-Zn EcArgE was confirmed using X-ray absorption spectroscopy, and we reported two X-ray crystal structures of E. coli ArgE. In summary, we describe the development of a new ninhydrin-based assay for ArgE, the identification of captopril and phenylboronic acids as ArgE inhibitors, thermal shift studies with ArgE + captopril, and the first two published crystal structures of ArgE (mono-Zn and di-Zn).

The three-dimensional structure of DapE from Enterococcus faecium reveals new insights into DapE/ArgE subfamily ligand specificity

DapE is a Zn2+-metallohydrolase recognized as a drug target for bacterial control. It is a homodimer that requires the exchange of interface strands by an induced fit essential for catalysis. Identifying novel anti-DapE agents requires greater structural details. Most of the characterized DapEs are from the Gram-negative group. Here, two high-resolution DapE crystal structures from Enterococcus faecium are presented for the first time with novel aspects. A loosened enzyme intermediate between the open and closed conformations is observed. Substrates may bind to loose state, subsequently it closes, where hydrolysis occurs, and finally, the change to the open state leads to the release of the products. Mutation of His352 suggests a role, along with His194, in the oxyanion stabilization in the mono-metalated Zn2+ isoform, while in the di-metalated isoform, the metal center 2 complements it function. An aromatic-π box potentially involved in the interaction of DapE with other proteins, and a peptide flip could determine the specificity in the Gram-positive ArgE/DapE group. Finally, details of two extra-catalytic cavities whose geometry changes depending on the conformational state of the enzyme are presented. These cavities could be a target for developing non-competitive agents that trap the enzyme in an inactive state.

Deciphering the role of the two metal-binding sites of DapE enzyme via metal substitution

DapE is a microbial metalloenzyme that hosts two Zn ions in its active site, although it shows catalytic activity with varying efficiency when the Zn ions in one or both of its metal-binding sites (MBS) are replaced by other transition-metal ions. The metal-ion promiscuity of DapE is believed to be a microbial strategy to overcome the homeostatic regulation of Zn ions by the mammalian host. Here, a hybrid QM/MM study is performed on a series of mixed-metal DapEs, where the Zn ion in the first MBS (MBS-1) is substituted by Mn, Co, Ni, and Cu ions, while the MBS-2 is occupied by Zn(II). The substrate binding affinity and the mechanism of catalytic action are estimated by optimizing the intermediates and the transition states with hybrid QM/MM method. Comparison of the binding affinity of the MBS-1 and MBS-2 substituted DapEs reveals that the MBS-1 substitution does not affect the substrate binding affinity in the mixed-metal DapEs, while a strong metal specificity was observed in MBS-2 substituted DapEs. On the contrary, the activation energy barriers show a high metal specificity at MBS-1 compared to MBS-2. Taken together, the QM/MM studies indicate that MBS-2 leads the substrate binding process, while MBS-1 steers the catalytic activity of the DapE enzyme.

Metal-ion promiscuity of microbial enzyme DapE at its second metal-binding site

Metalloenzymes are ubiquitous in nature catalyzing a number of crucial biochemical processes in animal and plant kingdoms. For better adaptation to the relative abundance of different metal ions in different cellular fluids, many of these enzymes exhibit metal promiscuity. The microbial enzyme DapE, an essential enzyme for bacterial growth and survival and a potentially safe target for antibiotics, continues to show enzyme activity when the two zinc ions in its active site are replaced by other transition metal ions. The effect of metal-ion substitution at the second metal-binding site of DapE on its substrate affinity and catalytic efficiency is investigated by QM/MM treatment of the enzyme-substrate complex, by modelling the enzyme with Mn(II), Co(II), Ni(II), or Cu(II) ion in place of Zn(II) at its second metal-binding site, while retaining Zn(II) ion at the first metal-binding site. On the basis of substrate binding energy and activation energy barrier for the chemical catalysis, it is found that Zn-Mn DapE shows poor binding affinity as well as inefficient chemical catalysis. Although Zn-Cu and Zn-Ni DapEs show activation energy barriers comparable to that of wild-type Zn-Zn DapE, their weaker substrate affinity renders these mixed-metal enzymes less efficient. On the other hand, Zn-Co DapE is found to outperform the naturally occurring Zn-Zn DapE, both in terms of substrate affinity and chemical catalysis. The observed metal promiscuity may have played an important role in the survival of bacteria even in those cellular media where Zn ions are in limited supply. Metal nonspecificity in the catalysis of DapE enzyme allows bacteria to thrive in different cellular media.

L-Captopril and its derivatives as potential inhibitors of microbial enzyme DapE: A combined approach of drug repurposing and similarity screening

The perils of antimicrobial drug resistance can be overcome by finding novel antibiotic targets and corresponding small molecule inhibitors. Microbial enzyme DapE is a promising antibiotic target due to its importance to the bacterial survival. The potency of L-Captopril, a well known angiotensin-converting enzyme inhibitor, as an inhibitor of DapE enzyme has been evaluated by analyzing its binding modes and binding affinity towards DapE enzyme. L-Captopril is found to bind the metal centers of DapE enzyme either via its thiolate group or through its carboxylate group. While the latter binding mode is found to be thermodynamically favorable, the former binding mode, also seen in the crystal structure, is kinetically favored. To optimize the binding affinity of the inhibitor towards DapE enzyme, a series of L-Captopril-based inhibitors have been modelled by changing the side groups of L-Captopril. The introduction of a bipolar functional group at the C4 position of the pyrrolidine ring of L-Captopril and the substitution of the thiol group with a carboxylate group, have been shown to provide excellent enzyme affinity that supersedes the binding affinity of DapE enzyme towards its natural substrate, thus making this molecule a potential inhibitor with great promise.

Reconstruction of diaminopimelic acid biosynthesis allows characterisation of Mycobacterium tuberculosis N-succinyl-L,L-diaminopimelic acid desuccinylase

With the increased incidence of tuberculosis (TB) caused by Mycobacterium tuberculosis there is an urgent need for new and better anti-tubercular drugs. N-succinyl-L,L-diaminopimelic acid desuccinylase (DapE) is a key enzyme in the succinylase pathway for the biosynthesis of meso-diaminopimelic acid (meso-DAP) and L-lysine. DapE is a zinc containing metallohydrolase which hydrolyses N-succinyl L,L diaminopimelic acid (L,L-NSDAP) to L,L-diaminopimelic acid (L,L-DAP) and succinate. M. tuberculosis DapE (MtDapE) was cloned, over-expressed and purified as an N-terminal hexahistidine ((His)₆) tagged fusion containing one zinc ion per DapE monomer. We redesigned the DAP synthetic pathway to generate L,L-NSDAP and other L,L-NSDAP derivatives and have characterised MtDapE with these substrates. In contrast to its other Gram negative homologues, the MtDapE was insensitive to inhibition by L-captopril which we show is consistent with novel mycobacterial alterations in the binding site of this drug.

Analysis of antibiotics by CE and their use as chiral selectors: An update

The widespread use of antibiotics in medicine and as growth-promoting agents has increased the demand for suitable analytical techniques for their analysis. Analytical methods based on CE or miniaturized CE systems have proved over the years their ability for the analysis of antibiotics. Since our last review (Electrophoresis 2014, 35, 28-49) several new CE methodologies have been reported for antibiotic analysis. This review presents an update of the literature published from June 2013 to June 2015 for the analysis of antibiotics by CE. UV continues being the most used detection system for antibiotics analysis by CE. Strategies to improve sensitivity as the use of sensitive detection systems and the application of preconcentration techniques appear to be the major developments. Furthermore, the use of portable and miniaturized devices for antibiotic analysis is presented in detail. Applications of the developed methodologies to the determination of residues of antibiotics in biological, food, and environmental samples are carefully described. Finally, new developments and applications of antibiotics as chiral selectors in CE are also included.