Monitoring inorganic mercury and methylmercury species with liquid chromatography–piezoelectric detection

Proposal for a mercury isolation procedure using cold vapor method in combination with voltammetric determination using a rotating gold electrode

The optimal process of pre-treatment and activation of gold rotating disc electrode (AuRDE) before voltammetric determination of mercury is proposed. This treatment encompasses polishing of the electrode surface, electrochemical cycling, and activation. This procedure both increases determination sensitivity as well as improves determination reproducibility. The detection limit on the working electrode achieved using this approach amounted to 8.26·10−10 mol L−1for direct mercury determination in water solution (applying 200 s running accumulation). The procedure of the quantitative mercury isolation from complicated sample matrix was developed as well. It provides better selectivity and significant increase of sensitivity of mercury determination. In case of mercury isolation from one liter of water the detection limit is 6.23·10−11 mol L−1 (analyzing a greater sample volume the determined concentration could be lower).

Pushing the Limits of Mercury Sensors with Gold Nanorods

The method presented here provides a direct way to determine mercury in tap water samples at the parts-per-trillion level. Its outstanding selectivity and sensitivity results from the well-known amalgamation process that occurs between mercury and gold. The entire procedure takes less than 10 min. No sample separation or sample preconcentration is required. The only step prior to mercury determination consists of mixing the water sample with a gold nanorod solution in sodium borohydride. The analytical figures of merit demonstrate precise and accurate analysis at the parts-per-trillion level. The limit of detection (6.6 x 10(-13) g x L(-1)) shows excellent potential for monitoring ultralow levels of mercury in water samples.