Speeding up enzymatic hydrolysis procedures for the multi-element determination in edible seaweed

Single step production of bioethanol from the seaweed Ulva rigida using sonication

The seaweed Ulva rigida, was converted to bioethanol in a simultaneous saccharification and fermentation process carried out rapidly under sonication.

Algal biomass analysis by laser-based analytical techniques--a review

Algal biomass that is represented mainly by commercially grown algal strains has recently found many potential applications in various fields of interest. Its utilization has been found advantageous in the fields of bioremediation, biofuel production and the food industry. This paper reviews recent developments in the analysis of algal biomass with the main focus on the Laser-Induced Breakdown Spectroscopy, Raman spectroscopy, and partly Laser-Ablation Inductively Coupled Plasma techniques. The advantages of the selected laser-based analytical techniques are revealed and their fields of use are discussed in detail.

Resveratrol in peanuts

Peanuts are important dietary food source of resveratrol with potent antioxidant properties implicated in reducing risk of cancer, cardiovascular and Alzheimer's disease, and delaying aging. Resveratrol is a naturally occurring stilbene phytoalexin phenolic compound produced in response to a variety of biotic and abiotic stresses. This paper is a review of trans-resveratrol and related stilbenes from peanuts--their chemical structures, mechanisms for their biosynthesis, and concentrations in comparison with other major food sources. It will also discuss trans-resveratrol's absorption, bioavailability, and major health benefits; processes to enhance their biosynthesis in peanuts by biotic and abiotic stresses; process optimization for enhanced levels in peanuts and their potential food applications; and methods used for its extraction and analysis.

Metal bioavailability and risk assessment from edible brown alga Laminaria japonica, using biomimetic digestion and absorption system and determination by ICP-MS

A new biomimetic digestion and absorption system, including in vitro bionic digestion and biomimetic membrane extraction, was used for the first time for the pretreatment of edible Laminaria japonica . After bionic digestion, 11 species of trace metals (V, Cr, Mn, Fe, Ni, Cu, Zn, Se, As, Cd, and Pb) in the resulting chyme were transformed into their final coordinated complexes and then absorbed by the biomembrane. Similar to the biomembrane between gastrointestinal tract and blood vessels, monolayer liposome was used for the first time as a biomembrane model. Affinity-monolayer liposome metals (AMLMs) were separated, determined by ICP-MS, and then used for the metal bioavailability assessment as the bioassimilated part. The action of gastrointestinal acidity and components (including digestive enzymes) was assessed on the basis of the concentration of AMLMs; the safe dosage and tolerable upper intake level of L. japonica for adults were proposed as 33.3 and 230.8 g/day, respectively.

Low-frequency ultrasound in biotechnology: state of the art

The use of low-frequency (10-60 kHz) ultrasound for enhancement of various biotechnological processes has received increased attention over the last decade as a rapid and reagentless method. Recent breakthroughs in sonochemistry have made the ultrasound irradiation procedure more feasible for a broader range of applications. By varying the sonication parameters, various physical, chemical and biological effects can be achieved that can enhance the target processes in accordance with the applied conditions. However, the conditions that have provided beneficial effects of ultrasound on bioprocesses are case-specific and are therefore not widely available in the literature. This review summarizes the current state of the art in areas where sonochemistry could be successfully combined with biotechnology with the aim of enhancing the efficiency of bioprocesses, including biofuel production, bioprocess monitoring, enzyme biocatalysts, biosensors and biosludge treatment.

Development of a new sample pre-treatment procedure based on pressurized liquid extraction for the determination of metals in edible seaweed

A new, simple, fast and automated method based on acetic acid-pressurized liquid extraction (PLE) has been developed for the simultaneous extraction of major and trace elements (As, Ca, Cd, Co, Cr, K, Mg, Mn, Na, Pb, Sr and Zn) from edible seaweeds. The target elements have been simultaneously determined by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of several extraction parameters (e.g. acetic acid concentration, extraction temperature, extraction time, pressure, number of cycles, particle size and diatomaceous earth (DE) mass/sample mass ratio) on the efficiency of metal leaching has been evaluated. The results showed that metal extraction efficiency depends on the mass ratio of the dispersing agent mass and the sample. The optimized procedure consisted of the following conditions: acetic acid (0.75 M) as an extracting solution, 5 min of extraction time, one extraction cycle at room temperature at a pressure of 10.3 MPa and addition of a dispersing agent (at a ratio of 5:1 over the sample mass). The leaching procedure was completed after 7 min (5 min extraction time plus 1 min purge time plus 1 min end relief time). Limits of detection and quantification and repeatability of the over all procedure have been assessed. Method validation was performed analysing two seaweed reference materials (NIES-03 Chlorella Kessleri and NIES-09 Sargasso). The developed extraction method has been applied to red (Dulse and Nori), green (Sea Lettuce) and brown (Kombu, Wakame and Sea Spaghetti) edible seaweeds.

Feasibility of Pressurization To Speed Up Enzymatic Hydrolysis of Biological Materials for Multielement Determinations

The feasibility of pressurized solvents (liquids at a high pressure and/or high temperature without the subcritical point being reached) has been newly investigated to accelerate enzymatic hydrolysis processes of mussel tissue for multielement determinations. The target elements (Al, As, Cd, Co, Cu, Fe, Hg, Li, Mn, Pb, Se, Sr, V, and Zn) were released from dried mussel tissue by action of two proteases (pepsin and pancreatin), and they have been evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES). Variables inherent to the enzymatic activity (pH, ionic strength, temperature, and enzyme mass) and factors affecting pressurization (static time, pressure, and number of cycles) were simultaneously studied by applying a Plackett-Burman design (PBD) as the screening method. Results showed that pH, ionic strength, and temperature were the most statistically significant factors (confidence interval of 95%) under pressurized conditions for pepsin, while pH and ionic strength affected pancreatin activity. This means that metal extraction is mostly attributed to enzymatic activity. The static time (enzymatic hydrolysis time) was found statistically nonsignificant for most of the elements, meaning that the hydrolysis procedure can be finished within a 2-15 min range. For pepsin, optimized conditions (pH 1.0, temperature 40 degrees C, pressure 1500 psi, static time 2 min, and number of cycles 3) gave quantitative extractions for As, Cd, Co, Cu, Hg, Li, Mn, Pb, Se, Sr, V, and Zn. The pepsin mass was 0.05 g, and the solution was Milli-Q water at pH 1.0 (adjusted with hydrochloric acid). For pancreatin, quantitative recoveries were only reached for As, Cd, Cu, Li, Pb, and Sr at room temperature, at a pressure of 1500 psi, for a static time of 2 min and a number of cycles of 3. The extraction solution was a 0.3 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer at a pH of 7.5 working at room temperature. Around 0.5 g of diatomaceous earth was used as dispersing agent for hydrolyses with either enzyme. Analytical performances, such as limits of detection and quantification and repeatability of the overall procedure, have been established. Finally, accuracy of the methods was assessed by analyzing seafood certified reference materials (GBW-08571, DORM-2, DOLT-3, TORT-2), fatty tissues certified reference materials (BCR 185, NIST 1577b), and fibrous certified reference materials (BCR 62, GBW-08501).