Simultaneous determination of copper, lead and cadmium by cathodic adsorptive stripping voltammetry using artificial neural network

A 1,8-Naphthalimide-based Tripodal Fluorescent Chemosensor to Selectively Detect Copper Ions

A 1,8-naphthalimide-based tripodal fluorescent ligand (L3) was synthesized through the copper (I) catalyzed Huisgen azide-alkyne cycloaddition reaction of 2-(2-azidoethyl)-6-morpholino-1 H-benzo[de]isoquinoline-1,3(2 H)-dione with triproparagylamine. Naphthalimide acts as the fluorophore while the triazole and amine nitrogens chelate the metal ion. L3 showed a selective fluorescence turn-off for Cu(II) over other metal ions in aqueous acetonitrile solution. A Job's plot, Benesi-Hildbrand plot and high-resolution mass spectrometry data confirm a 1:1 binding stoichiometry with a binding constant of 7.8 х105 M- 1 while addition of disodium EDTA demonstrates its reversibility. The structure and stability of the complex was supported by theoretical calculations. The limit of detection for Cu(II) was calculated to be 0.3 µM which is considerably lower than WHO recommended Cu(II) limit in drinking water.

A green reaction-based turn-off fluorescence sensor for determination of copper ions: DFT calculations, quenching mechanism, green chemistry metrics, and application in environmental samples

When Cu(II) reacts with ascorbic acid (AA) to form Cu(I), Cu(I) can combine with eosin Y (EY) to form ionic associations, resulting in significant fluorescence quenching of the EY. Based on the turn-off of fluorescence in the chemosensor EY, a green reaction is proposed herein for the detection of Cu(II). The novel detection method for Cu(II) demonstrates simplicity, high sensitivity, and excellent selectivity, rendering it suitable for analyzing environmental samples. A static fluorescence quenching mechanism is validated through the Stern-Volmer relationship, and the thermodynamic parameters of the reaction are explored using a van 't Hoff plot. The reaction mechanism is investigated via fluorescence spectra, absorption spectra, and density-functional theory (DFT) calculations. The probe's green nature is confirmed by applying four green analytical chemistry metrics.

AIE active fluorescent organic nanoparticles based optical detection of Cu2+ ions in pure water: a case of aggregation-disaggregation reversibility

An AIE-active pyrene-terpyridine derivative, (4'-(pyren-1-yl)-2,2':6',2''-terpyridine) (1) was found to form nanoaggregate in an aqueous medium. The probe involved hydrogen bonding with solvent molecules that modulated the charge transfer behavior and consequently resulted in different spectroscopic behavior due to the formation of fluorescent organic nanoparticles (FONs). In the presence of Cu2+ ions, FONs displayed a ratiometric red shift of the absorption band (360 to 420 nm) accompanied by a prominent naked-eye color change from colorless to light yellow. With a gradual increase in water content, 1 displayed a huge red shift of the emission band (430 to 475 nm) denoting its switching from monomer to FONs. In the presence of Cu2+, the 475 nm emission band of FONs gradually diminished, facilitating the micromolar scale detection of Cu2+ (LOD = 8.57 μM) in a 100% aqueous medium with a fluorogenic color change from cyan to dark. The SEM and DLS data indicated the cation-induced disaggregation of FONs, which was further confirmed by mass spectral analysis and electron paramagnetic resonance measurement. In addition, the high selectivity of FONs towards Cu2+ ions over other potential cations and the 2 : 1 (1-Cu2+) binding stoichiometry were also determined. Moreover, the spectroscopic behavior of the monomeric amphiphilic probe was well supported by extensive DFT study. Such detection of Cu2+ ions in pure aqueous medium denoting an aggregation-disaggregation event is very rare in the literature.

Construction of an optical sensor for copper determination in environmental, food, and biological samples based on the covalently immobilized 2-(2-benzothiazolylazo)-3-hydroxyphenol in agarose

An optical chemical sensor has been developed for the quantitative spectrophotometric analysis of copper. The optode is dependent on covalent immobilization of 2-(2-benzothiazolylazo)-3-hydroxyphenol (BTAHP) in a transparent agarose membrane. The absorbance variation of immobilized BTAHP on agarose as a film upon the addition of 5 × 10-3 M aqueous solutions of Mn2+, Zn2+, Hg2+, Cd2+, Pb2+, Co2+, Ni2+, Fe2+, La3+, Fe3+, Cr3+, Zr4+, Se4+, Th4+, and UO22+ revealed substantially higher changes in the Cu2+ ion content compared to other ions investigated here. The effects of various experimental parameters, such as the solution pH, the reaction time, and the concentration of reagents, on the quality of Cu2+ sensing were examined. Under ideal experimental circumstances, a linear response was achieved for Cu2+ concentrations ranging from 1.0 × 10-9 to 7.5 × 10-6 M with an R2 value of 0.9988. The detection (3σ) and quantification (10σ) limits of the procedure for Cu2+ analyses were 3.0 × 10-10 and 9.8 × 10-10 M, respectively. No observable interference was recorded in the detection of Cu2+ due to other inorganic cations. With no indication of BTAHP leaching, the membrane demonstrated good durability and quick response times. The optode was effectively used to determine the presence of Cu2+ in environmental water, food, and biological samples.

Multi-targeted fluorescent probes for detection of Zn(II) and Cu(II) ions based on ESIPT mechanism

With the rapid development of industry, it is pretty critical to detect the heavy metals. Recently, the 2-(2-hydroxyphenyl) benzothiazole derivatives with different numbers of rotatable phenyl m (m = 1,2,3) fluorescent probes HL^m were synthesized. However, the theoretical analysis of the mechanism was still missing. In this work, we have systematically researched the mechanisms of excited state intramolecular proton transfer (ESIPT) and the detection of Cu(II), Zn(II) ions for the hydrogen-bond system HL^m though quantum chemistry methods. By bond parameters and the minimum energy pathways analyses, the proton of this system was probed directly transfer without barrier. Bond parameters, real space function at bond critical point, the frontier molecular orbital, electron spectra and orbital interaction diagram were carried to elucidate response to Cu(II), Zn(II) ions. In addition, comparing the Gibbs free energy variation of the complexation reaction between fluorescent probes and ions, it can be proved that the number of rotatable benzene rings affects the response ability of the probe to target ions.

Artificial intelligence and machine learning-based monitoring and design of biological wastewater treatment systems

Artificial intelligence (AI) and machine learning (ML) are currently used in several areas. The applications of AI and ML based models are also reported for monitoring and design of biological wastewater treatment systems (WWTS). The available information is reviewed and presented in terms of bibliometric analysis, model's description, specific applications, and major findings for investigated WWTS. Among the applied models, artificial neural network (ANN), fuzzy logic (FL) algorithms, random forest (RF), and long short-term memory (LSTM) were predominantly used in the biological wastewater treatment. These models are tested by predictive control of effluent parameters such as biological oxygen demand (BOD), chemical oxygen demand (COD), nutrient parameters, solids, and metallic substances. Following model performance indicators were mainly used for the accuracy analysis in most of the studies: root mean squared error (RMSE), mean square error (MSE), and determination coefficient (DC). Besides, outcomes of various models are also summarized in this study.

Solvent-regulated fluorescence off-on signaling of Ni(II) and Zn(II) with the formation of two mononuclear complexes with an ATP detection ability by Zn(II) assembly

The current study shows that Schiff base HL, (Z)-2,4-dibromo-6-(((piperidin-2-ylmethyl)imino)methyl)phenol, can be used successfully as a selective chemosensor for Zn(II) and Ni(II) among several competing cations in purely aqueous and semi-aqueous media. Under UV light in methanol-water (9 : 1) HEPES buffer, the receptor gives its response by changing its color to cyan color in the presence of Zn(II) and to bluish cyan color in the presence of Ni(II). Surprisingly, the chemosensor can only reliably identify Zn(II) in a hundred percent aqueous medium by changing its color to light yellow. UV and fluorescence studies in both aqueous and semi-aqueous media are used to further investigate this Zn(II) and Ni(II) recognition phenomenon. The high values of the host-guest binding constants, obtained by electronic and fluorescence titration, ensure that a strong bond exists between HL and Ni(II)/Zn(II). As anticipated, two highly luminescent mononuclear, crystalline compounds, complexes 1 and 2, have been developed by a separate reaction of HL and Zn(II)/Ni(II), and the high luminous properties are due to the occurrence of Chelation Enhanced Fluorescence (CHEF). According to the single crystal structure, the asymmetric units of both complexes consist of two deprotonated chemosensor units and one Zn(II)/Ni(II), leading to the formation of an octahedral complex. For Ni(II) and Zn(II) sensing, the predicted LOD is in the nanomolar range. Both complexes 1 and 2 are fluorescence active and studies to check their ATP detection ability, but intriguingly, only complex 2 is capable of detecting ATP in a fully aqueous solution. Finally, the live cell imaging study validates the two sensors' biosensing functionality.

Positional Isomeric Symmetric Dipodal Receptors Dangled with Rotatable Binding Scaffolds: Fluorescent Sensing of Silver Ions and Sequential Detection of l-Histidine and Their Multifarious Applications

Three simple dipodal artificial acyclic symmetric receptors, SDO, SDM, and SDP, driven by positional isomerism based on xylelene scaffolds were designed, synthesized, and characterized by ¹H NMR, ¹³C NMR, and mass spectroscopy techniques. Probes SDO, SDM, and SDP demonstrated selective detection of Ag⁺ metal ions and amino acid l-histidine in a DMSO-H₂O solution (1:1 v/v, HEPES 50 mM, pH = 7.4). The detection of Ag⁺ metal ions occurred in three ways: (i) inhibition of the photoinduced electron-transfer (PET) process, (ii) blueshifted fluorescence enhancement via the intramolecular charge-transfer (ICT) process, and (iii) restricted rotation of the dangling benzylic scaffold following coordination with a Ag⁺ metal ion. Job's plot analysis and quantum yields confirm the binding of probes to Ag⁺ in 1:1, 1:2, and 1:2 ratios with LODs and LOQs found to be 1.3 μM and 3.19 × 10^-7 M, 6.40 × 10^-7 and 2.44 × 10 ^-6 M, and 9.76 × 10^-7 and 21.01 × 10^-7 M, respectively. ¹H NMR titration, HRMS, ESI-TOF, IR analysis, and theoretical DFT investigations were also used to establish the binding stoichiometry. Furthermore, the probes were utilized for the detection of Ag⁺ ions in water samples, food samples, soil analysis, and bacterial imaging in Escherichia coli cells and a molecular logic gate was constructed.

A red-emitting Europium(III) complex as a luminescent probe with large Stokes shift for the sequential determination of Cu2+ and biothiols in real samples

In this work, a novel Eu³⁺-DTPA-bis(AMC) complex with red luminescence was designed and synthesized for sequential detection of Cu²⁺ and biothiols (Cys/Hcy/GSH) based on the displacement strategy with the good selectivity, high sensitivity, and large Stokes shift (288 nm). The possible detection mechanism was verified by UV-vis, the high-resolution mass spectrometry, and the fluorescence decay curve. The experimental parameters, including the solution pH, the incubation time, the concentration ratio of Eu³⁺-DTPA-bis(AMC) to Cu²⁺ and biothiols concentration, were optimized. Under the optimal conditions, it shows a good linear relationship between the concentration (0-10 μM) of Cu²⁺ and the fluorescence intensity of Eu³⁺-DTPA-bis(AMC), with a low detection limit of 0.065 μM. The linear range and the limit of detection of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system for Cys/Hcy/GSH were 2.5-22.5/5-45/5-50 μM and 0.11/0.07/0.05 μM, respectively. Surprisingly, the high or low concentration of Eu³⁺-DTPA-bis(AMC)/Cu²⁺ can significantly affect the selectivity of the sensing system to biothiols (Cys/GSH/Hcy). When the concentration of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system is 10.0 μΜ, it could recognize biothiols (Cys/GSH/Hcy) from other substances, but when the concentration is as low as 3.3 μM, it could further specifically distinguished Cys from Hcy/GSH. Owing to the high anti-interference characteristics, accuracy and specificity, the sensing system was well applied to the cascade detection of Cu²⁺ in actual environmental samples and Cys in biological and food samples, including FBS, urine, milk, beverage, fresh juice with the satisfactory recoveries from 96.20 to 106.80 %.

On the synthesis and performance of a simple colorimetric and fluorescent chemosensor for Cu2+ with good reversibility

A colorimetric and fluorescent chemosensor (CS1) for Cu²⁺ based on the mechanism of internal charge transfer (ICT) has been successfully designed and prepared by simple condensation of 4^_(diethylamino)salicylaldehyde and oxalyl dihydrazide. Cu²⁺ in solution (DMSO/H₂O = 7:3, v/v) by 5 mM NaAc-HAc at pH 7.0 was determined through dual channels: (1) "naked-eye" observation, a visually dramatic color change from light green to orange, which can be used for qualitative determination of Cu²⁺; (2) spectrofluorometry, which can quantificationally assay Cu²⁺. It provides a simple-to-use platform for reliable detection of Cu²⁺ at concentrations ranging from 5.0 × 10^-7 to 1.1 × 10^-5 M with detection limit of 1.2 × 10^-7 M, which is nearly 2 × 10² times lower than the maximum allowable level of inorganic Cu²⁺ in drinking water (1.3 ppm, ∼20 µM) permitted by the EPA (Environmental Protection Agency), and the sensing detection of Cu²⁺ ions was reversible.

Multi-layered g-C3N4 as a Fluorescent Probe for Hg2+ Detection

Hg²⁺ is one of the most toxic heavy metal ions that exist in the environment and it forms large numbers of toxic binary compounds. Accurate and rapid detection of the concentration of heavy metal ions is a prerequisite technology to achieve pollution control and prevention. Fluorescent probes have attracted extensive attention because of their high sensitivity, prominent precision, convenient and fast visualization of heavy metals. Herein, we report multi-layered graphitic carbon nitride via a simple thermopolymerization treatment as a very effectual fluorescent probe for sensitive and selective detection of Hg²⁺ with a limit of detection as low as 1.14 nM.

A new diformyl phenol based chemosensor selectively detects Zn2+ and Co2+ in the nanomolar range in 100% aqueous medium and HCT live cells

A new diformyl phenol based chemosensor that can sense Zn2+ and Co2+ in the nanomolar range in 100% aqueous solution and in HCT cells was explored.

Benzimidazole–acid hydrazide Schiff–Mannich combo ligands enable nano–molar detection of Zn2+ via fluorescence turn–on mode from semi–aqueous medium, HuH–7 cells, and plants

Herein, we have synthesized two unsymmetrical and dipodal Schiff–Mannich combo ligands, benzoic acid (3–benzoimidazol–1–ylmethyl–2–hydroxy–5–methyl–benzylidene)–hydrazide (H2BBH) and the hydroxyl analogue, 2–hydroxy–benzoic acid (3–benzoimidazol–1–ylmethyl–2–hydroxy–5–methyl–benzylidene)–hydrazide (H3BSH) for selective detection of Zn2+ in semi–aqueous...

Simple and sensitive colorimetric sensors for the selective detection of Cu(ii)

A simple, sensitive colorimetric probe for detecting Cu(ii) ions with fast response has been established with a detection limit of 2.82 μM. UV-Vis spectroscopy along with metal ion response, selectivity, stoichiometry, competition was investigated. In the presence of copper(ii), the UV-Vis spectrum data showed significant changes and the colorimetric detection showed a color change from colorless to yellow. After the selective binding of receptor L with Cu(ii), the UV-visible absorption at 355 nm decreased dramatically, a new absorbance band appeared at 398 nm and its intensity enhanced with the increase in the amount of Cu(ii). Moreover, it exhibited highly selective and sensitive recognition towards Cu(ii) ions in the presence of other cations over the pH range of 7-11. The complex structure was verified by FT-IR spectroscopy, elemental analysis and quantum mechanical calculations using B3LYP/6-31G(d) to illustrate the complex formation between L and Cu(ii). According to the Job plot and the quantum mechanical calculations, the stoichiometric ratio for the complex formation was proposed to be 1 : 1.

Active Bromoaniline-Aldehyde Conjugate Systems and Their Complexes as Versatile Sensors of Multiple Cations with Logic Formulation and Efficient DNA/HSA-Binding Efficacy: Combined Experimental and Theoretical Approach

Two fluorescence active bromoaniline-based Schiff base chemosensors, namely, (E)-4-bromo-2-(((4-bromophenyl)imino)methyl)phenol (HL1 ) and (E)-2-(((4-bromophenyl)imino)methyl)phenol (HL2 ), have been employed for the selective and notable detection of Cu2+ and Zn2+ ions, respectively, with the simultaneous formation of two new metal complexes [Cu(L1)2] (1) and [Zn(L2)2] (2). X-ray single crystal analyses indicate that complexes 1 and 2 are tetra-coordinated systems with substantial CH...π/π...π stacking interactions in the solid-state crystal structures. These two complexes are exploited for the next step detection of Al3+ and Hg2+ where complex 2 exhibits impressive results via turn-off fluorescence quenching in (DMSO/H2O) HEPES buffer medium. The sensing phenomena are optimized by UV-vis spectral analyses as well as theoretical calculations (density functional theory and time-dependent density functional theory). The combined detection phenomena of the ligand (HL2 ) and complex 2 are exclusively utilized for the first time to construct a molecular memory device, intensifying their multisensoric properties. Furthermore, the DNA- and human serum albumin (HSA)-binding efficacies of these two complexes are examined by adopting electronic and fluorometric titration methods. Complex 2 shows a higher DNA-binding ability in comparison with complex 1, whereas in the case of HSA, the reverse situation is observed. Finally, the binding modes of both the complexes with DNA and HSA have been investigated through molecular docking studies, suggesting good agreement with the experimental results.

Tetraphenylethylene AIEgen bearing thiophenylbipyridine receptor for selective detection of copper(ii) ion

A new tetraphenylethylene (TPE) AIEgen appended with a thiophenylbipyridine moiety exhibits sensitivity and selectivity towards copper ions via a PET “turn on–turn off” mechanism.

A comparative study of two analytical techniques for the simultaneous determination of amprolium HCl and ethopabate from combined dosage form and in presence of their alkaline degradation

Chemometric and separation-based techniques (HPLC) are the most applicable and versatile analytical techniques for the analysis of multicomponent mixtures, in the present contribution, a comparison was highlighted between the two analytical techniques of utmost importance as stability indicating assays: UV-spectrophotometry and HPLC-UV focusing on the greenness of each for the simultaneous determination of amprolium HCl (AMP) and ethopabate (ETHOP) in the presence of their alkaline degradation products. The first method was chemometric methods applied were PLS-1, GA-PLS and GA-ANN. To compare the prediction ability of the models, a 4-factor 5-level experimental design was used to establish a calibration set of 25 mixtures containing different ratios of the drugs and their degradation products. The validity of the proposed methods was assessed using an independent validation set of 5 mixtures. The comparison between the different models showed the superiority of ANN model in solving the highly overlapped spectra of the quaternary mixture, yet using inexpensive and easy to handle instruments like the UV-VIS spectrophotometer. The ANN method was used for the quantitative analysis of the drugs in pharmaceutical dosage form via handling the UV spectral data. The second method was based on liquid chromatographic HPLC determination of AMP and ETHOP using C18 column (250 × 4.6 mm²)-PRONTOSIL 5 μm, a mobile phase consisting of methanol: Hexane sulphonic acid sodium salt at (pH = 3.4 ± 0.2) adjusted by orthophosphoric acid (55: 45 v/v). Quantitation was achieved with UV detection at 270 nm at temperature 24 °C. Linearity, accuracy and precision were found to be acceptable over the concentration range of 10.0-70.0 and 1.0-25.0 μg·mL^-1 for AMP and ETHOP, respectively. The proposed methods could be successfully applied for the routine analysis of the studied drugs either in their pure bulk powders or in their pharmaceutical preparations without any preliminary separation step. The results obtained were statistically compared with those obtained by applying the reported method.

A highly selective fluorescent probe for the sensing of Cu2+ based on the hydrolysis of a quinoline-2-carboxylate and its application in cell imaging

A highly selective OFF–ON fluorescent probe is developed for the sensing of Cu2+ based on the hydrolysis of a quinoline-2-carboxylate moiety. The probe is weakly fluorescent due to esterification of the phenolic group. Upon treatment with 1 equiv. of Cu2+, the probe exhibits strong fluorescence at 570 nm. The probe also exhibits high selectivity for Cu2+ over other cations with a low detection limit of 0.2 μM, which is sensitive enough to meet the standard of the World Health Organization for Cu2+ in drinking water (30 μM). Moreover, the probe shows a very low cell cytotoxicity, and imaging experiments demonstrate that the probe can be used for the sensing of Cu2+ in living cells.

A new half-condensed Schiff base platform: structures and sensing of Zn2+ and H2PO4- ions in an aqueous medium

A newly designed and synthesized half-condensed organic moiety 2-hydroxy-5-methyl-3-[(2-phenylamino-phenylimino)-methyl]-benzaldehyde (HL') and a Zn₂L₄ complex sequentially detect Zn²⁺ and H₂PO₄^- ions as low as 1.13 nM and1.23 μM, respectively. HL' and a dinuclear Zn(ii) complex of in situ generated L^- in a solution formulated as Zn₂L₄ under investigation were characterized by physicochemical and spectroscopic studies along with detailed structural analyses by single-crystal X-ray crystallography. The selectivity and sensitivity of HL' towards Zn²⁺ ions and of the Zn₂L₄ complex towards H₂PO₄^- ions are based on CHEF and via displacement pathways, respectively. Dual sensing of Zn²⁺ ions and H₂PO₄^-ions in an aqueous medium via "Green-Blue-Green" emission with the reversible transformation of in situ formed HL' to HL was established by detailed electronic absorption and emission spectroscopic studies. This non-cytotoxic probe (HL', i.e. produced HL in solution) and Zn₂L₄ complexes are able to monitor the subcellular distribution changes of Zn²⁺ and H₂PO₄^- ions, respectively, by fluorescence microscopy using the human semen sample.

Execution of julolidine based derivative as bifunctional chemosensor for Zn2+ and Cu2+ ions: Applications in bio-imaging and molecular logic gate

A simple julolidine based chemosensor (JT) was designed and synthesized by single condensation step. JT displayed excellent selectivity and sensitivity with on-off responses towards Zn²⁺ and Cu²⁺ over other biologically relevant metal ions in aqueous media. Upon addition of Zn²⁺ ions, JT exhibited a significant blue shift in emission followed by turn-on enhancement while with Cu²⁺, the fluorescence intensity of JT was completely vanished. The 1:1 binding affinity between JT and Zn²⁺/Cu²⁺ was proposed by Job's plot analysis. The detection limit for Zn²⁺ and Cu²⁺ ions reached at 3.5 × 10^-8 M and 1.46 × 10^-6 M, respectively. The sensing mechanism of JT with Zn²⁺/Cu²⁺ was supported by DFT calculations. Based on photophysical studies and its reversibility environment with EDTA, molecular logic gates were fabricated. Furthermore, JT was successfully established to detect intracellular Zn²⁺ ions in live cells by turn-on response.

A quinoxaline-diaminomaleonitrile conjugate system for colorimetric detection of Cu2+ in 100% aqueous medium: observation of aldehyde to acid transformation

In this work, we have strategically incorporated a quinoxaline derivative and a diaminomaleonitrile moiety to construct a chemosensor, 2-amino-3-[(quinoxalin-2-ylmethylene)-amino]-but-2-enedinitrile (H2qm). The notable feature of this strategy is to generate a highly conjugated Schiff base platform with interesting binding properties. Remarkably, H2qm exhibited a visual sensing ability towards Cu2+ in 100% aqueous medium. The effectiveness of the chemosensor has been demonstrated by utilizing it to determine the Cu2+ concentration in real samples. Interestingly, the reaction between H2qm and Cu(ClO4)2·6H2O in DMSO yielded a quinoxaline-2-carboxylic acid based compound and single crystal X-ray diffraction analysis unveiled the resulting structure as [(qa)2Cu(H2O)2] (Hqa = quinoxaline-2-carboxylic acid).

A simple strategy for the detection of Cu(ii), Cd(ii) and Pb(ii) in water by a voltammetric sensor on a TC4A modified electrode

The development of an uncomplicated, fast and low-price method for heavy metal ion detection is essential for environmental detection and pollution control.

Nitrogen-doped carbon quantum dots as a fluorescent probe to detect copper ions, glutathione, and intracellular pH

A facile one-step hydrothermal method was developed to synthesize nitrogen-doped carbon quantum dots (N-CQDs) by utilizing hexamethylenetetramine as the carbon and nitrogen source. The quantum yield (QY) of 21.7% was under the excitation wavelength of 420 nm with maximum emission at 508 nm. This N-CQD fluorescent probe has been successfully applied to selectively determine the concentration of copper ion (Cu²⁺) with a linear range of 0.1-40 μM and a limit of detection of 0.09 μM. In addition, the fluorescence of N-CQDs could be effectively quenched by Cu²⁺ and specifically recovered by glutathione (GSH), which render the N-CQDs as a premium fluorescent probe for GSH detection. This fluorescence "turn-on" protocol was applied to determine GSH with a linear range of 0.1-30 μM as well as a detection limit of 0.05 μM. For pH detection, there is good linearity in the pH range of 2.87-7.24. Furthermore, N-CQD is a promising and convenient fluorescent pH, Cu²⁺, and glutathione sensor with brilliant biocompatibility and low cytotoxicity in environmental monitoring and bioimaging applications.

Paper-Based Sensor Chip for Heavy Metal Ion Detection by SWSV

Heavy metal ion pollution problems have had a terrible influence on human health and the environment. Therefore, the monitoring of heavy metal ions is of great practical significance. In this paper, an electrochemical three-electrode system was fabricated and integrated on nitrocellulose membrane (NC) by the use of magnetron sputtering technology, which exhibited a uniform arrangement of porous structure without further film modification. This paper-based sensor chip was used for Cu²⁺ detection by square-wave stripping voltammetry (SWSV). Within the ranges of 5–200 μg·L⁻¹ and 200–1000 μg·L⁻¹, it showed good linearity of 99.58% and 98.87%, respectively. The limit of detection was 2 μg·L⁻¹. On the basis of satisfying the detection requirements (10 μg·L⁻¹), the integrated sensor was small in size and inexpensive in cost. Zn²⁺, Cd²⁺, Pb²⁺ and Bi³⁺ were also detected by this paper-based sensor chip with good linearity.