Gold nanoelectrode ensembles for direct trace electroanalysis of iodide

Confined Electrochemiluminescence Generation at Ultra-High-Density Gold Microwell Electrodes

Electrochemiluminescence (ECL) imaging analysis based on the ultra-high-density microwell electrode array (UMEA) has been successfully used in biosensing and diagnostics, while the studies of ECL generation mechanisms with spatial resolution remain scarce. Herein we fabricate a gold-coated polydimethylsiloxane (PDMS) UMEA using electroless deposition method for the visualization of ECL reaction process at the single microwell level in conjunction with using microscopic ECL imaging technique, demonstrating that the microwell gold walls are indeed capable of enhancing the ECL generation. For the classical ECL system involving tris(2,2′-bipyridyl)ruthenium (Ru(bpy)₃²⁺) and tri-n-propylamine (TPrA), the ECL image of a single microwell appears as a surface-confined ring, indicating the ECL intensity generated inside the well is much stronger than that on the top surface of UMEA. Moreover, at a low concentration of Ru(bpy)₃²⁺, the ECL image remains to be ring-shaped with the increase of exposure time, because of the limited lifetime of TPrA radical cations TPrA^+•. In combination with the theoretical simulation, the ring-shaped ECL image is resolved to originate from the superposition effect of the mass diffusion fields at both microwell wall and bottom surfaces.

Nanomaterials: Electrochemical Properties and Application in Sensors

The unique properties of nanoparticles make them an extremely valuable modifying material, being used in electrochemical sensors. The features of nanoparticles affect the kinetics and thermodynamics of electrode processes of both nanoparticles and redox reactions occurring on their surface. The paper describes theoretical background and experimental studies of these processes. During the transition from macro- to micro- and nanostructures, the analytical characteristics of sensors modify. These features of metal nanoparticles are related to their size and energy effects, which affects the analytical characteristics of developed sensors. Modification of the macroelectrode with nanoparticles and other nanomaterials reduces the detection limit and improves the degree of sensitivity and selectivity of measurements. The use of nanoparticles as transducers, catalytic constituents, parts of electrochemical sensors for antioxidant detection, adsorbents, analyte transporters, and labels in electrochemical immunosensors and signal-generating elements is described.

Development of a robust, fast screening method for the potentiometric determination of iodide in urine and salt samples

In this work, a potentiometric flow injection method is described for the fast bi-parametric determination of iodide and iodate in urine and salt samples. The developed methodology aimed for iodine speciation with a potentially portable system (running on batteries). The iodate reduction to iodide was effectively attained in line within the same manifold. The iodide determination was accomplished in the dynamic range of 2.50×10^-6-1.00×10^-3M and the total iodine dynamic range, resulted from iodide plus iodate, was 3.50×10^-6-2.00×10^-3M. The calculated limits of detection were 1.39×10^-6M and 1.77×10^-6M for iodide and iodate, respectively. A determination rate of 21h^-1 for the bi-parametric iodide and iodate determination was obtained for sample injection. The urine samples (RSD <5.8% for iodide and RSD <7.0% for iodate) results were in agreement with those obtained by the classic Sandell-Kolthoff reaction colorimetric reference procedure (RD <7.0%) and standard samples from Centers for Disease Control and Prevention, Atlanta, USA (CDC) international inter-laboratory EQUIP program. The developed flow method was also successfully applied to the iodide and iodate determination in salt samples (RSD <3.1% for iodate and iodide), with comparable results to conventional procedures. No significant interferences were observed interference percentage <9% for both determinations.

Nanobiosensing with Arrays and Ensembles of Nanoelectrodes

Since the first reports dating back to the mid-1990s, ensembles and arrays of nanoelectrodes (NEEs and NEAs, respectively) have gained an important role as advanced electroanalytical tools thank to their unique characteristics which include, among others, dramatically improved signal/noise ratios, enhanced mass transport and suitability for extreme miniaturization. From the year 2000 onward, these properties have been exploited to develop electrochemical biosensors in which the surfaces of NEEs/NEAs have been functionalized with biorecognition layers using immobilization modes able to take the maximum advantage from the special morphology and composite nature of their surface. This paper presents an updated overview of this field. It consists of two parts. In the first, we discuss nanofabrication methods and the principles of functioning of NEEs/NEAs, focusing, in particular, on those features which are important for the development of highly sensitive and miniaturized biosensors. In the second part, we review literature references dealing the bioanalytical and biosensing applications of sensors based on biofunctionalized arrays/ensembles of nanoelectrodes, focusing our attention on the most recent advances, published in the last five years. The goal of this review is both to furnish fundamental knowledge to researchers starting their activity in this field and provide critical information on recent achievements which can stimulate new ideas for future developments to experienced scientists.

Iodide sensing via electrochemical etching of ultrathin gold films

Iodide is an essential element for humans and animals and insufficient intake is still a major problem. Affordable and accurate methods are required to quantify iodide concentrations in biological and environmental fluids. A simple and low cost sensing device is presented which is based on iodide induced electrochemical etching of ultrathin gold films. The sensitivity of resistance measurements to film thickness changes is increased by using films with a thickness smaller than the electron mean free path. The underlying mechanism is demonstrated by simultaneous cyclic voltammetry experiments and resistance change measurements in a buffer solution. Iodide sensing is conducted in buffer solutions as well as in lake water with limits of detection in the range of 1 μM (127 μg L(-1)) and 2 μM (254 μg L(-1)), respectively. In addition, nanoholes embedded in the thin films are tested for suitability of optical iodide sensing based on localized surface plasmon resonance.

Arrays of microelectrodes: technologies for environmental investigations

Within this work it is our intention to provide an overview of the use of arrays or microelectrodes in the characterisation of environmental samples. Electrochemical methods are often a relatively simple and inexpensive alternative to spectroscopic or chromatographic methods for the analysis of a wide range of analytes. Arrays of microelectrodes display a number of advantages over simple planar macroelectrodes and the reasons for this will be detailed within this work. We will also describe some of the most common methods for constructing microarrays. The application of these arrays for analysis of environmental samples such as soil and water for heavy metal contamination has been the major focus of research in this field and comprises much of this review. However other systems will also be detailed such as determination of various anions or other samples such as pesticides.

Analytical methods for the determination of halogens in bioanalytical sciences: a review

Fluorine, chlorine, bromine, and iodine have been studied in biological samples and other related matrices owing to the need to understand the biochemical effects in living organisms. In this review, the works published in last 20 years are covered, and the main topics related to sample preparation methods and analytical techniques commonly used for fluorine, chlorine, bromine, and iodine determination in biological samples, food, drugs, and plants used as food or with medical applications are discussed. The commonest sample preparation methods, as extraction and decomposition using combustion and pyrohydrolysis, are reviewed, as well as spectrometric and electroanalytical techniques, spectrophotometry, total reflection X-ray fluorescence, neutron activation analysis, and separation systems using chromatography and electrophoresis. On this aspect, the main analytical challenges and drawbacks are highlighted. A discussion related to the availability of certified reference materials for evaluation of accuracy is also included, as well as a discussion of the official methods used as references for the determination of halogens in the samples covered in this review.

Sol-gel route to zirconia-Pt-nanoelectrode arrays 8 nm in radius: their geometrical impact in mass transport

The fabrication of advanced nanoelectrode arrays and their electrochemical characterization are presented. These nanoelectrode arrays are constituted of nanoperforations of 8 nm in radius leading to platinum and protected by an inorganic matrix made of crystalline zirconia. These nanoelectrodes arrays provide a ceramic support with a high thermal and chemical stability. These devices present a well characterized structure with a control of size, shape, and spacing of the nanoelectrodes, allowing studying in depth both the mass transport and the charge transfer properties in the nanometer range. The radial diffusion occurs when the experimental scan rate is superior to a theoretical scan rate estimated from the model proposed by Amatore and colleagues. The coupling between electrochemical analysis and nanoscale structural characterizations successfully demonstrates that the theory defined for microelectrode arrays can be directly transposed for well-defined metal-ceramic nanocomposite nanoelectrodes.

Polycarbonate-based ordered arrays of electrochemical nanoelectrodes obtained by e-beam lithography

Ordered arrays of nanoelectrodes for electrochemical use are prepared by electron beam lithography (EBL) using polycarbonate as a novel e-beam resist. The nanoelectrodes are fabricated by patterning arrays of holes in a thin film of polycarbonate spin-coated on a gold layer on Si/Si(3)N(4) substrate. Experimental parameters for the successful use of polycarbonate as high resolution EBL resist are optimized. The holes can be filled partially or completely by electrochemical deposition of gold. This enables the preparation of arrays of nanoelectrodes with different recession degree and geometrical characteristics. The polycarbonate is kept on-site and used as the insulator that separates the nanoelectrodes. The obtained nanoelectrode arrays (NEAs) exhibit steady state current controlled by pure radial diffusion in cyclic voltammetry for scan rates up to approximately 50 mV s( - 1). Electrochemical results showed satisfactory agreement between experimental voltammograms and suitable theoretical models. Finally, the peculiarities of NEAs versus ensembles of nanoelectrodes, obtained by membrane template synthesis, are critically evaluated.

Nanoelectrodes for biological measurements

Nanoelectrodes are electrodes with a critical dimension in the range of one to hundreds of nanometers and include individual electrodes, nanoelectrode ensembles, and arrays. Metallic nanowires, carbon nanotubes, magnetic nanoparticles, and metal oxide nanowires have been employed to fabricate nanoelectrodes and platforms. In this review, applications of single electrodes, nanoelectrode arrays, and ensembles are briefly evaluated, with emphasis on biological analysis. Nanoelectrodes offer great advantages in numerous areas of biological investigations, particularly in single cells studies, fabrication of microchips, design of coordinated biosensors, and in addressable patterned electrodes. Consequently, nanoelectrodes have immense potential in the development of efficient, specific, sensitive, and intelligent sensors. In conjunction with the rapidly evolving, cost-effective fabrication and materials development approaches, these sensors can be used as direct, point-of-care clinical devices, enabling more personalized medical care. The development and application of nanodevices in biology and medicine will have enormous implications for society and human health.

Zinc phthalocyanine and silver/gold nanoparticles incorporated MCM-41 type materials as electrode modifiers

Mercaptopropyl functionalized ordered mesoporous silica spheres were prepared (MPS). Ag or Au nanoparticles (NPs) were anchored onto the MPS materials (Ag-MPS or Au-MPS). Further, zinc phthalocyanine (ZnPc) was adsorbed into the channels and surface (MPS-ZnPc, Ag-MPS-ZnPc, Au-MPS-ZnPc). Diffuse reflectance studies revealed the successful incorporation of Ag or Au NPs inside the silica spheres with and without ZnPc. TEM images showed the uniform distribution of Ag or Au NPs in the silica spheres of different size ranging from 4 to 22 nm or 6 to 31 nm, respectively. XRD pattern showed average crystallite particle size of 18 or 28 nm for Ag or Au NPs respectively which were reduced to 14 or 16 nm on introduction of ZnPc which oxidizes the metal NPs partially. Chemically modified electrodes were prepared by coating the colloidal solutions of the silica materials on the glassy carbon (GC) electrodes. Electrocatalytic reductions of O(2) and CO(2) at the modified electrodes were studied. The presence of Ag or Au NPs was found to increase the electrocatalytic efficiency of ZnPc toward O(2) reduction by 290% or 70% based on the current density measured at -0.35 V and toward CO(2) reduction by 150% or 120% based on the current density measured at -0.60 V respectively. Catalytic rate constants were increased 2-fold for O(2) reduction and 8-fold for CO(2) reduction due to Ag or Au NPs, respectively, which act as nanoelectrode ensembles. The synergic effect of ZnPc and metal NPs on the electrocatalytic reduction of O(2) is presented.

Part II: coordinated biosensors--development of enhanced nanobiosensors for biological and medical applications

In this review, we summarize recent developments in nanobiosensors and their applications in biology and potential in medical diagnostics. We first highlight the concept of coordinated nanobiosensors, which integrate desirable properties of the individual components: protein machinery for sensitivity and specificity of binding, peptide or nucleic acid chemistry for aligning the various electron-transducing units and the nanoelectrodes for enhancing sensitivity in electronic detection. The fundamental basis of coordinated nanobiosensing is in applying the precise 3D atomic resolution structural information to rationally design and fabricate biosensors with high specificity and sensitivity. Additionally, we describe several biosensors developed for detecting biologically relevant compounds, including those for hydrogen peroxide, dopamine, glucose, DNA and cytochrome C. Results from these systems highlight the potential advantages of using nanoscale biosensors and how further developments in this area will change biomedical diagnostics and treatments drastically.

Part I: recent developments in nanoelectrodes for biological measurements

Biosensors are a type of analytical device that use biological molecules to monitor biorecognition events and interactions. Coupled with the progress in nanotechnologies over recent years, the development of a nanobiosensor based on individual nanoelectrodes and nanoelectrode arrays or nanoelectrode ensembles offers unprecedented avenues for screening and detection at ultrahigh sensitivities. These capabilities provide the basis for a paradigmatic change in biomedical diagnostics and treatment. In this review, we highlight recent developments in nanoelectrode platforms and their suitability for integrating with biological components for the fabrication of ultrasensitive nanobiosensors.

Addressable Nanoelectrode Membrane Arrays: Fabrication and Steady-State Behavior

An addressable nanoelectrode membrane array (ANEMA) based on a Au-filled track-etched polycarbonate membrane was fabricated. The Au-filled membrane was secured to a lithographically fabricated addressable ultramicroelectrode (UME) array patterned with 25 regularly spaced (100 microm center to center spacing), 10 microm diameter recessed Pt UMEs to create 25 microregions of 10 microm diameter nanoelectrode ensembles (NEEs) on the membrane. The steady-state voltammetric behavior of 1.0 mM Ru(NH(3))(6)Cl(3) and 1.0 mM ferrocene methanol in 0.1 M KCl on each of the micro NEEs resulted in sigmoidal-shaped voltammograms which were reproducible across the ANEMA. This reproducibility of the steady-state current was attributed to the overlapping hemispherical diffusion layers at the Au-filled nanopores of each 10 microm diameter NEE of a ANEMA. The track-etched polycarbonate membranes were filled using a gold electroless deposition procedure into the 30 nm diameter pores in the membrane. Electrical connection between the Au-filled template array and the lithographic UME platform array was achieved by potentiostatic electrodeposition of Cu from an acidic copper solution into each of the 25 recessed Pt UMEs on the UME array platform. A multiplexer unit capable of addressing 64 individual micro NEEs on an ANEMA is described. ANEMAs have advantages of high reproducibility, facile fabrication, multitime reuse of lithographically fabricated UME arrays, and purely steady-state behavior.