Ultrasound-assisted extraction of isoflavones from soy beverages blended with fruit juices

Bioavailability and mechanisms of dietary polyphenols affected by non-thermal processing technology in fruits and vegetables

Plant polyphenols play an essential role in human health. The bioactivity of polyphenols depends not only on their content but also on their bioavailability in food. The processing techniques, especially non-thermal processing, improve the retention and bioavailability of polyphenolic substances. However, there are limited studies summarizing the relationship between non-thermal processing, the bioavailability of polyphenols, and potential mechanisms. This review aims to summarize the effects of non-thermal processing techniques on the content and bioavailability of polyphenols in fruits and vegetables. Importantly, the disruption of cell walls and membranes, the inhibition of enzyme activities, free radical reactions, plant stress responses, and interactions of polyphenols with the food matrix caused by non-thermal processing are described. This study aims to enhance understanding of the significance of non-thermal processing technology in preserving the nutritional properties of dietary polyphenols in plant-based foods. It also offers theoretical support for the contribution of non-thermal processing technology in improving food nutrition.

Extraction, bioactive function and application of wheat germ protein/peptides: A review

The aging population and high incidence of age-related diseases are major global societal issues. Consuming bioactive substances as part of our diet is increasingly recognized as essential for ensuring a healthy life for older adults. Wheat germ protein has a reasonable peptide structure and amino acid ratio but has not been fully utilized and exploited, resulting in wasted wheat germ resources. This review summarizes reformational extraction methods of wheat germ protein/peptides (WGPs), of which different methods can be selected to obtain various WGPs. Interestingly, except for some bioactive activities found earlier, WGPs display potential anti-aging activity, with possible mechanisms including antioxidant, immunomodulatory and intestinal flora regulation. However, there are missing in vitro and in vivo bioactivity assessments of WGPs. WGPs possess physicochemical properties of good foamability, emulsification and water retention and are used as raw materials or additives to improve food quality. Based on the above, further studies designing methods to isolate particular types of WGPs, determining their nutritional and bioactive mechanisms and verifying their activity in vivo in humans are crucial for using WGPs to improve human health.

Effect of Ultrasound-Assisted Extraction Parameters on Total Polyphenols and Its Antioxidant Activity from Mango Residues (Mangifera indica L. var. Manililla)

Manililla is a mango variety whose residues contain bioactive compounds such as polyphenols and flavonoids, with high added value. The use of environmentally friendly extraction technology would be of great relevance; hence, this study aimed to evaluate the effect of solvent relation, sonication time and amplitude on the ultrasound-assisted extraction of total polyphenols in Manililla mango residues (peel, endocarp and kernel) and antioxidant activity. An experimental design 23 with a central point was used to evaluate the curvature behavior of the process variables. Conventional maceration was used as a control. The better conditions were obtained at the central point using 50% ethanol in water, 60% amplitude and 20 min of sonication time. We obtained values of up to 1814 mg GAE/100 g, 469 mg GAE/100 g and 672 mg GAE/100 g of total polyphenols and 1228 mg QE/100 g, 653 mg QE/100 g and 880 mg QE/100 g of total flavonoids for peel, endocarp and kernel, respectively. Mangiferin was quantified in ultrasound-assisted extraction at 150 mg/g in peel and 0.025 mg/g in the kernel, but it was not detectable in maceration. An antioxidant capacity of 87%, 14% and 83% inhibition for peel, endocarp and kernel, respectively, were obtained. Peel and kernel were the residues with higher potential as extraction material, while endocarp was not.

Application of Ultrasound Pre-Treatment for Enhancing Extraction of Bioactive Compounds from Rice Straw

The extraction of water-soluble bioactive compounds using different green methods is an eco-friendly alternative for valorizing agricultural wastes such as rice straw (RS). In this study, aqueous extracts of RS (particles < 500 µm) were obtained using ultrasound (US), reflux heating (HT), stirring (ST) and a combination of US and ST (USST) or HT (USHT). The extraction kinetics was well fitted to a pseudo-second order model. As regards phenolic compound yield, the US method (342 mg gallic acid (GAE). 100 g-1 RS) was more effective than the ST treatment (256 mg GAE.100 g-1 RS), reaching an asymptotic value after 30 min of process. When combined with HT (USHT), the US pre-treatment led to the highest extraction of phenolic compounds from RS (486 mg GAE.100 g-1 RS) while the extract exhibited the greatest antioxidant activity. Furthermore, the USHT extract reduced the initial counts of Listeria innocua by 1.7 logarithmic cycles. Therefore, the thermal aqueous extraction of RS applying the 30 min US pre-treatment, represents a green and efficient approach to obtain bioactive extracts for food applications.

Antimicrobial and antioxidant activities of defatted Moringa oleifera seed meal extract obtained by ultrasound-assisted extraction and application as a natural antimicrobial coating for raw chicken sausages

Moringa oleifera is a medicinal plant, and its seed oil is known to have high antioxidant properties. The byproduct obtained after oil extraction is called Moringa oleifera seed meal (MoSM), whose potential bioactivity has not been sufficiently documented. Therefore, this study was undertaken with the aim of identifying Moringa oleifera seed meal extract (ME) as a natural antibacterial and antioxidant alternative. First, the effect of solvent extraction of MoSM with 60% (v/v) ethanol combined with ultrasound (UAE) was determined at the sample-to-solvent ratio of 1: 10, with different time and power combinations of UAE. The lowest minimum inhibitory concentration (MIC) exhibited by ME at 200 W and 20 min (ME_200/20) against both Escherichia coli among the gram-negative bacteria and Bacillus cereus among the gram-positive bacteria was 3.12 mg/g. The leakage of intracellular constituents as well as the damage of the B. cereus cells after being treated with ME were confirmed by measuring the absorbance of the supernatant at 260 and 280 nm and observation of the cells under a scanning electron microscope. Moreover, the highest total phenolic content was also recorded with ME_200/20 at 460 mg gallic acid equivalent/g of extract, and the subsequent significantly higher (p < 0.05) antioxidant activity was determined to be 11.18 and 9.20 mg acetic acid equivalent/g of extract by 2,2-diphenyl-1-picrylhydrazyl and ferric reducing antioxidant power assays, respectively. The high-performance liquid chromatography results showed that gallic acid and vanillic acid were predominantly present in the extract, followed by quercetin, sinapic acid and chlorogenic acid. Interestingly, caffeic acid appeared in the sample treated with UAE only. The extract was finally applied with a chitosan-based coating to evaluate the antimicrobial activity against E. coli and B. cereus on raw chicken sausages in the concentration range of 1-5%. Incorporating 3% extract could inactivate B. cereus and E. coli for a 1.4 log reduction on day 3 and a 1.78 log reduction on day 6 of storage and, further, could significantly suppress the growth of both bacteria until day 9. Thus, this study confirmed the strong antibacterial and antioxidant properties of ME and its potential use in real food systems as a natural food antibacterial agent.

Coupling Ultrasound with Heat-Reflux to Improve the Extraction of Quercetin, Kaempferol, Ginkgetin and Sciadopitysin from Mairei Yew Leaves

The coupling of ultrasound and heat–reflux extraction (UHRE) was developed for separation for quercetin (QU), kaempferol (KA), ginkgetin (GI) and sciadopitysin (SC) from Mairei Yew leaves. The Box–Behnken design was used to optimize the UHRE conditions for obtaining the maximum yield of flavonoids. The optimal extraction conditions were as follows: boiling 80% methanol (V/V) for extraction solvent, 20 min for the extraction time, 200 W for the ultrasonic power and 26 mL/g for the liquid–solid ratio. By UHRE, the yields of QU, KA, GI and SC were, respectively, 0.109, 0.406, 0.031 and 0.355 mg/g, and total yield of four flavonoids was 0.901 mg/g, which were, respectively, 1.25-fold and 1.23-fold higher than those by using ultrasonic-assisted extraction (UAE) and heating reflux extraction (HRE). Moreover, the extraction time for the equilibrium yields of flavonoids using UHRE was 83.3% and 27.8%, respectively, less than the corresponding time using UAE and HRE. Compared with HRE and UAE, UHRE showed the increase of cell disruption degree as observed by scanning electron microscopy, which may be the reason for high yield and rapid extraction of target compounds.

Deep Eutectic Solvent-Based Microwave-Assisted Extraction of Baicalin from Scutellaria baicalensis Georgi

Deep eutectic solvents (DESs) have attracted significant attention as green media for the extraction and separation of natural compounds from Chinese medicine. In this study, a hydrophobic DESs-based microwave-assisted extraction (MAE) was successfully used to efficiently extract baicalin from Scutellaria baicalensis Georgi. Firstly, DecA: N4444-Cl (DES-1 , molar ratio 1 : 2) was screened and selected as the most appropriate DES by comparing the extraction yield in different hydrophobic DESs. Based on the extraction yield of baicalin, response surface methodology (RSM) was employed to model and optimize the parameters (extraction temperature, liquid-solid ratio, and extraction time). Furthermore, the maximum yield of 106.96 mg·g−1 was achieved under optimum conditions in DES-containing aqueous solutions (33 vol% water content), which reached a similar level that was conducted using the pharmacopoeia procedure (104.94 mg·g−1). These results indicated that the proposed method is an excellent alternative for the extraction of baicalin.

Evaluation of the antimicrobial activities of ultrasonicated spinach leaf extracts using RAPD markers and electron microscopy

Spinach (Spinacia oleracea L.) leaves represent an important dietary source of nutrients, antioxidants and antimicrobials. As such, spinach leaves play an important role in health and have been used in the treatment of human diseases since ancient times. Here, the aims were to optimize the extraction methods for recovering antimicrobial substances of spinach leaves, determine the minimum inhibitory concentrations (MICs) of the antimicrobial substances against Escherichia coli and Staphylococcus aureus and, finally, evaluate the effects of spinach leaves' antimicrobials on bacterial DNA using central composite face-centered methods. The effect of the extracts on both Gram-positive and Gram-negative bacterial models was examined by scanning electron microscopy (SEM) and random amplification of polymorphic (bacterial) DNA (RAPD). The optimal extraction conditions were at 45 °C, ultrasound power of 44% and an extraction time of 23 min. The spinach extracts exhibited antimicrobial activities against both bacteria with MICs in the 60-100 mg/ml range. Interestingly, SEM showed that the treated bacterial cells appear damaged with a reduction in cell number. RAPD analysis of genomic DNA showed that the number and sizes of amplicons were decreased by treatments. Based on these results, it was inferred that spinach leaf extracts exert bactericidal activities by both inducing mutations in DNA and causing cell wall disruptions.

An efficient approach for the extraction of orientin and vitexin from Trollius chinensis flowers using ultrasonic circulating technique

Ultrasonic circulating extraction (UCE) approach was developed for effective extraction of orientin and vitexin from the flowers of Trollius chinensis successfully. In this study, some parameters potentially influencing the yields of orientin and vitexin were systematically investigated and optimized by Plackett-Burman and Box-Behnken design, and the optimum operational conditions obtained were 60% ethanol volume fraction, 1000r/min stirring speed, 30°C temperature, 28min ultrasonic irradiation time, 10mL/g liquid-solid ratio and 738W ultrasonic irradiation power. Satisfactory yields of orientin (6.05±0.19mg/g) and vitexin (0.96±0.03mg/g) were obtained in a relatively shorter extraction time under the derived optimum conditions, compared to other ultrasonic extraction methods and heat extraction methods. The mechanism of UCE procedure was discussed in detail, to illustrate the advantage of UCE in the extraction process. In addition, no degradation of orientin and vitexin and high reproducibility of the developed UCE method were observed under the optimum conditions. The proposed UCE technique with high-capacity and circulation function is a rapid and efficient sample extraction technique, and performs promising in large-scale sample preparation.

Development of new efficient method for isolation of phenolics from sea algae prior to their rapid resolution liquid chromatographic-tandem mass spectrometric determination

The extraction of phenolic compounds from 4 different sea algae samples, three brown algae (Cystoseira abies-marina, C. abies-marina grinded under cryogenic conditions with liquid nitrogen, Undaria pinnatifida and Sargassum muticum) and one red algae (Chondrus crispus) via solid phase extraction using micro-elution solid-phase extraction (μ-SPE) plate method was studied. Prior to μ-SPE, 50mg of algae with 80% methanol mixture was extracted in hyphenated series by various extraction techniques, such as pressurized liquid extraction and Ika Ultra-Turrax® Tube Drive, in combination with ultrasound assisted extraction. The μ-SPE plate technique reduced the time of sample pre-treatment thanks to higher sensitivity and pre-concentration effect. Selected groups of benzoic acid derivatives (p-hydroxybenzoic, protocatechuic, gallic, vanillic, and syringic acids), hydroxybenzaldehydes (4-hydroxybenzaldehyde, and 3,4-dihydroxybenzaldehyde), and cinnamic acid derivatives (p-coumaric, caffeic, ferulic, sinapic, and chlorogenic acids) were determined using rapid resolution liquid chromatography coupled to mass spectrometry detection with negative ion electrospray ionization (RRLC-ESI-MS) using multiple reactions monitoring. LOQs of measured samples varied in the range 0.23-1.68ng/mL and LODs in the range 0.07-0.52ng/mL. The applied method allowed a simultaneous determination of phenolics (i.e. free, esters soluble in methanol, glycosides, and esters insoluble in methanol) in less than 5min (including alkaline or acidic hydrolysis of raw extracts) from sea algae extracts.

Development and validation of ultrasound-assisted solid-liquid extraction of phenolic compounds from waste spent coffee grounds

In this current work, Box-Behnken statistical experimental design (BBD) was adopted to evaluate and optimize USLE (ultrasound-assisted solid-liquid extraction) of phytochemicals from spent coffee grounds. Factors employed in this study are ultrasonic power, temperature, time and solid-liquid (SL) ratio. Individual and interactive effect of independent variables over the extraction yield was depicted through mathematical models, which are generated from the experimental data. Determined optimum process conditions are 244W of ultrasonic power, 40°C of temperature, 34min of time and 1:17g/ml of SL ratio. The predicted values were in correlation with experimental values with 95% confidence level, under the determined optimal conditions. This indicates the significance of selected method for USLE of phytochemicals from SCG.

Ultrasound-assisted extraction of natural antioxidants from the flower of Limonium sinuatum: Optimization and comparison with conventional methods

Natural antioxidants are widely used as dietary supplements or food additives. An optimized method of ultrasound-assisted extraction (UAE) was proposed for the effective extraction of antioxidants from the flowers of Limonium sinuatum and evaluated by response surface methodology. In this study, ethanol concentration, ratio of solvent to solid, ultrasonication time and temperature were investigated and optimized using a central composite rotatable design. The optimum extraction conditions were as follows: ethanol concentration, 60%; ratio of solvent to solid, 56.9:1mL/g; ultrasonication time, 9.8min; and temperature, 40°C. Under the optimal UAE conditions, the experimental values (483.01±15.39μmolTrolox/gDW) matched with those predicted (494.13μmolTrolox/gDW) within a 95% confidence level. In addition, the antioxidant activities of UAE were compared with those of conventional maceration and Soxhlet extraction methods, and the ultrasound-assisted extraction could give higher yield of antioxidants and markedly reduce the extraction time.

The isoflavone content of two new alfalfa-derived products for instant beverage preparation

The frequent use of plant-based products to promote health leads to the search for scientific information related to efficacy and safety of those products for human consumption. Two alfalfa-derived products (ADP), freeze-dried juice (FDJ) and dehydrated powder (DP), from alfalfa harvested in Mexico, are being developed as new possible nutraceuticals. To the best of our knowledge, any study reports the real composition of such products used to prepare instant beverages in what concerns isoflavone contents. Seven isoflavones (glycitein, formononetin, biochanin A, daidzein, genistein, daidzin and genistin) were assessed by HPLC-DAD analysis as well as its variation in five different batches of these products. Different solvents were tested in order to choose the best one to extract isoflavones. The results showed the presence of daidzein, genistein, genistin and daidzin in most samples while glycitein, formononetin and biochanin A were not detected. Significant differences between isoflavone contents were found with different solvent systems. Water was the best option to extract daidzein (0.40-1.08 mg per unit and 1.30-4.90 mg per unit for DP and FDJ, respectively) whereas the water-methanol-formic acid mixture was efficient to extract genistein (0.19-0.43 mg per unit and 0.15-0.72 mg per unit for DP and FDJ, respectively). In all cases, the total isoflavone content was higher in freeze-dried juices than in dehydrated powders. Genistein and daidzein were the more abundant isoflavones quantified. Further physiological and nutritional studies are needed to complete the validation of effectiveness and safety of these products.

Simultaneous extraction, optimization, and analysis of flavonoids and polyphenols from peach and pumpkin extracts using a TLC-densitometric method

Background

The use of medicinal plants has been reported throughout human history. In the fight against illnesses, medicinal plants represent the primary health care system for 60 % of the world’s population. Flavonoids are polyphenolic compounds with active anti-microbial properties; they are produced in plants as pigments. Quercetin, myricetin, and rutin are among the most well-known and prevalent flavonoids in plants, with an antioxidant activity capable of decreasing the oxidation of low density lipoproteins [LDLs]. To date, this research is the first of its kind to employ a coupled thin-layer chromatography (TLC) and a densitometric quantification method with a Box-Behnken design (BBD) response surface methodology (RSM) for optimization of ultrasonic-assisted extraction and determination of rutin and quercetin from peach and ellagic acid and myricetin from pumpkin fruits.

Results

The effect of process variables (extraction temperature (°C), extraction power (%) and extraction time (min)) on ultrasound-assisted extraction (UAE) were examined by using BBD and RSM. TLC followed by Quantity-One™ (BioRad) image analysis as a simple and rapid method was used for identification and quantification of the compounds in complex mixtures. The results were consistent under optimal conditions among the experimental values and their predicted values. A mass spectrometry (MALDI-TOF MS) technique was also used to confirm the identity of the natural products in the TLC spots resolved.

Conclusion

The results show that the coupled TLC-densitometric methods & BBD can be a very powerful approach to qualitative and quantitative analysis of; rutin and quercetin from peach extracts; and ellagic acid and myricetin contents from pumpkin extracts.

Effect of germinated brown rice extracts on pancreatic lipase, adipogenesis and lipolysis in 3T3-L1 adipocytes

BACKGROUND

This study investigated anti-obesity effects of seven different solvent (n-hexane, toluene, dicholoromethane, ethyl acetate, absolute methanol, 80% methanol and deionized water) extracts of germinated brown rice (GBR) on pancreatic lipase activity, adipogenesis and lipolysis in 3T3-L1 adipocytes.

METHODS

GBR were extracted separately by employing different solvents with ultrasound-assisted. Pancreatic lipase activity was determined spectrophotometrically by measuring the hydrolysis of p-nitrophenyl butyrate (p-NPB) to p-nitrophenol at 405 nm. Adipogenesis and lipolysis were assayed in fully differentiated 3T3-L1 adipocytes by using Oil Red O staining and glycerol release measurement.

RESULTS

GBR extract using hexane showed the highest inhibitory effect (13.58 ± 0.860%) at concentration of 200 μg/ml followed by hexane extract at 100 μg/ml (9.98 ± 1.048%) while ethyl acetate extract showed the lowest (2.62 ± 0.677%) at concentration of 200 μg/ml on pancreatic lipase activity. Water extract at 300 μg/ml showed 61.55 ± 3.824% of Oil Red O staining material (OROSM), a marker of adipogenesis. It significantly decrease (p < 0.05) lipid accumulation than control (OROSM = 100%), follow by ethyl acetate extract at 300 μg/ml (OROSM = 65.17 ± 3.131%). All the GBR extracts induced lipolysis with 1.22-1.83 fold of greater glycerol release than control.

CONCLUSIONS

GBR extracts especially the least polar and intermediate polar solvent extracts exhibited inhibitory effect on pancreatic lipase, decrease fat accumulation by adipocyte differentiation inhibition, and stimulate lipolysis on adipocytes. Therefore, GBR could be furthered study and developed as a functional food in helping the treatment and/or prevention of obesity.

Comparative study of the methodology used in the extraction of isoflavones from legumes applying a modified QuEChERS approach

INTRODUCTION

Isoflavones are phytochemicals of great interest because of their association with a large variety of positive effects on human health. The major sources of isoflavones in the diet are plants of the Leguminosae family, especially soybeans, although many other legumes more widely consumed in the Mediterranean diet have also been reported to contain these compounds. In previous work we extracted isoflavones from samples using a modified QuEChERS (Quick Easy Cheap Effective Rugged Safe) methodology.

OBJECTIVE

To compare different methods for placing the sample and the solvent in contact to optimise the extraction of isoflavones from legumes (chickpeas, lentils and white beans) using a modified QuEChERS methodology.

METHOD

Five different approaches to sample agitation were tested: vortex agitation, thermostatted stirring agitation and thermostatted tray shaking, and a thermostatted ultrasound bath and an ultrasound probe. To evaluate the different methodologies a modified QuEChERS approach was used as the extraction method. The separation and quantification of isoflavones was carried out using liquid chromatography-triple quadrupole/mass spectrometry (LC-MS/MS).

RESULTS

The best methods were found upon using a thermostatted shaking tray for the extraction of chickpeas and white beans and the ultrasound probe for lentil samples. These methods were chosen based on the highest amount of analytes obtained as well as the best recovery values.

CONCLUSION

Determination of isoflavones in foods may be affected by the different methods used to place the sample and the solvent in contact in the extraction step. The main advantages of the proposed extraction procedures are their simplicity, speed, reliability and low cost.

Box-Behnken design based statistical modeling for ultrasound-assisted extraction of corn silk polysaccharide

In this study, ultrasound assisted extraction (UAE) conditions on the yield of polysaccharide from corn silk were studied using three factors, three level Box-Behnken response surface design. Process parameters, which affect the efficiency of UAE such as extraction temperature (40-60 °C), time (10-30 min) and solid-liquid ratio (1:10-1:30 g/ml) were investigated. The results showed that, the extraction conditions have significant effects on extraction yield of polysaccharide. The obtained experimental data were fitted to a second-order polynomial equation using multiple regression analysis with high coefficient of determination value (R(2)) of 0.994. An optimization study using Derringer's desired function methodology was performed and the optimal conditions based on both individual and combinations of all independent variables (extraction temperature of 56 °C, time of 17 min and solid-liquid ratio of 1:20 g/ml) were determined with maximum polysaccharide yield of 6.06%, which was confirmed through validation experiments.

Ultrasound-assisted extraction of syringin from the bark of Ilex rotunda thumb using response surface methodology

In this work, a rapid extraction method based on ultrasound-assisted extraction (UAE) of syringin from the bark of Ilex rotunda Thumb using response surface methodology (RSM) is described. The syringin was analyzed and quantified by high performance liquid chromatography coupled with UV detection (HPLC-UV). The extraction solvent, extraction temperature and extraction time, the three main factors for UAE, were optimized with Box-Behnken design (BBD) to obtain the highest extraction efficiency. The optimal conditions were the use of a sonication frequency of 40 kHz, 65% methanol as the solvent, an extraction time of 30 min and an extraction temperature of 40 °C. Using these optimal conditions, the experimental values agreed closely with the predicted values. The analysis of variance (ANOVA) indicated a high goodness of model fit and the success of the RSM method for optimizing syringin extraction from the bark of I. rotunda.

Extraction and isolation of phenolic compounds

Phenolic compounds constitute a major class of plant secondary metabolites that are widely distributed in the plant kingdom and show a large structural diversity. These compounds occur as aglycones or glycosides, as monomers or constituting highly polymerized structures, or as free or matrix-bound compounds. Furthermore, they are not uniformly distributed in the plant and their stability varies significantly. This greatly complicates their extraction and isolation processes, which means that a single standardized procedure cannot be recommended for all phenolics and/or plant materials; procedures have to be optimized depending on the nature of the sample and the target analytes, and also on the object of the study. In this chapter, the main techniques for sample preparation, and extraction and isolation of phenolic compounds have been reviewed-from classical solvent extraction procedures to more modern approaches, such as the use of molecularly imprinted polymers or counter-current chromatography.

The use of response surface methodology to optimize the ultrasound-assisted extraction of five anthraquinones from Rheum palmatum L

In this paper, ultrasound-assisted extraction (UAE) was applied to the extraction of anthraquinones (aloe-emodin, rhein, emodin, chrysophanol and physcion) from Rheum palmatum L. The five anthraquinones were quantified and analyzed by high performance liquid chromatography coupled with UV detection (HPLC-UV). The extraction solvent, extraction temperature and extraction time parameters, the three main factors for UAE, were optimized with response surface methodology (RSM) to obtain the highest extraction efficiency. The optimal conditions were the use of 84% methanol as solvent, an extraction time of 33 min and an extraction temperature of 67 °C. Under these optimal conditions, the experimental values agreed closely with the predicted values. The analysis of variance indicated a high goodness of model fit and the success of RSM method for optimizing anthraquinones extraction in Rheum palmatum L.