Gas chromatographic determination of carbonyl compounds in biological and oil samples by headspace single-drop microextraction with in-drop derivatisation

Development of a Sensitive and Selective Method for the Determination of some Selected Aldehydes Based on Fluorescence Quenching

Phenanthrene fluorescence quenching in anionic micellar system of sodium dodecyl sulphate (SDS) was explored for the development of a sensitive and selective method for a group of selected aldehydes (2,6-dichlorobenzaldehyde, 4-(dimethylamino)benzaldehyde, 4-aminobenzaldehyde, 4-nitrobenzaldehyde, 2-chlorobenzaldehyde, benzaldehyde and 2-methoxybenzaldehyde). Experiments were performed in 0.02 mol L- 1 SDS. All the studied aldehydes quenched the fluorescence intensity of the probe (phenanthrene). Stern-Volmer equation was useful in explaining the phenanthrene quenching by the studied aldehydes. Stern-Volmer constants ([Formula: see text]) were obtained as a result of using the Stern-Volmer equation that gives the information in respect of sensitivity of the method for the studied aldehydes. Greater the [Formula: see text] higher will be the sensitivity and vice versa. [Formula: see text], detection limit (DL) and quantification limit (QL) were observed in the order 2,6-dichlorobenzaldehyde > 4-dimethylaminobenzaldehyde > 4-aminobenzaldehyde > 4-nitrobenzaldehyde > 2-chlorobenzaldehyde > benzaldehyde > 2-methoxybenzaldehyde. Phenanthrene fluorescence quenching by the studied aldehydes is useful for their determination in environmental samples.

An Improved GC-MS Method for Malondialdehyde (MDA) Detection: Avoiding the Effects of Nitrite in Foods

Malondialdehyde (MDA) is one of the representative end products under lipid peroxidation, indicating the degree of lipid oxidation in foods. However, compounds in pickled products, especially the nitrite in salted lean pork can react with MDA under the acidic condition, leads to the loss of MDA and an underestimation on lipid oxidation through the conventional assay. In this study, the quantification for MDA in the sample containing sodium nitrite were found lacking accuracy by the thiobarbituric acid (TBA) assay and chromatography assay based on alkaline hydrolysis as the reaction between them were difficult to be completely inhibited. Among other trials, the improvement GC-MS analysis utilizing deuterium substituted MDA (MDA-d₂) as an internal standard and applying perfluorophenylhydrazine (PFPH) as a derivative reagent can reduce the deviations from the presence of nitrite in the salted lean pork meat and the recovery is between 93.9% and 98.4% and coefficient of variation for the intermediate precision is between 1.1 and 3.5% using the method. The advanced gas chromatograph mass spectrometer (GC-MS) assay also has a very low detection limit (0.25 ng/mL) with both hydrolysis types.

A sensitive chemiluminescence detection approach for determination of 2,4-dinitrophenylhydrazine derivatized aldehydes using online UV irradiation - luminol CL reaction. Application to the HPLC analysis of aldehydes in oil samples

Aldehydes are toxic carbonyl compounds that are identified in various matrices surrounding us. For instance, aldehydes could be formed during the cooking and frying of foods which affects the food quality and safety. Derivatization is a must for the determination of aldehydes as they lack intrinsic chromophoric groups. 2,4-Dinitrophenyl hydrazine (DNPH) is the most used derivatizing reagent for aldehydes and the formed hydrazones could be determined by either HPLC-UV or LC-MS. However, UV detection is non-sensitive, and the MS equipment is expensive and not widely available. Thus, herein we report a smart chemiluminescence (CL) detection method for the DNPH aldehydes derivatives. These derivatives are supposed to possess photosensitization ability due to the presence of strong chromophoric structures; nitrobenzene and phenyl hydrazone. Upon their UV irradiation, singlet oxygen is found to be produced which then converts the DNPH-aldehyde derivative into hydroperoxide. Next, the hydroperoxide reacts with luminol in an alkaline medium producing a strong CL. An HPLC system with online UV irradiation and online reaction with luminol followed by CL detection was constructed and used for the determination of aldehydes after their derivatization with DNPH. The developed method showed excellent sensitivity with detection limits down to 1.5-18.5 nM. The achieved sensitivity is superior to that obtained by HPLC-UV and LC-MS detection methods for DNPH-aldehydes derivatives. Additionally, our approach is an chemiluminogenic where the DNPH reagent itself does not produce CL which is an excellent advantage. The method was applied successfully for the determination of aldehydes in canola oil samples using simple liquid-liquid extraction showing good recovery (87.0-106.0%), accuracy (87.2-106.6), and precision (RSD≤10.2%). After analysis of fresh and heated oil samples, it was demonstrated that heating of oil, even for short time, strongly elevated the level of their aldehydes' content. At last, it was found that the results of the analysis of aldehydes in oil samples using the proposed method perfectly matched those obtained by a reference LC-MS method.

Review: Microextraction Technique Based New Trends in Food Analysis

Food chemistry is the study and classification of the quality and origin of foods. The identification of definite biomarkers and the determination of residue contaminants such as toxins, pesticides, metals, human and veterinary drugs, which are a very common source of food-borne diseases. The food analysis is continuously demanding the improvement of more robust, sensitive, highly efficient, and economically beneficial analytical approaches to promise the traceability, safety, and quality of foods in the acquiescence with the consumers and legislation demands. The traditional methods have been used at the starting of the 20th century based on wet chemical methods. Now it existing the powerful analytical techniques used in food analysis and safety. This development has led to substantial enhancements in the analytical accuracy, precision, sensitivity, selectivity, thereby mounting the applied range of food applications. In the present decade, microextraction (micro-scale extraction) pays more attention due to its futures such as low consumption of solvent and sample, throughput analysis easy to operate, greener, robotics, and miniaturization, different adsorbents have been used in the microextraction process with unique nature recognized with wide range applications.

Opportunities for green microextractions in comprehensive two-dimensional gas chromatography / mass spectrometry-based metabolomics - A review

Microextractions have become an attractive class of techniques for metabolomics. The most popular technique is solid-phase microextraction that revolutionized the field of modern sample preparation in the early nineties. Ever since this milestone, microextractions have taken on many principles and formats comprising droplets, fibers, membranes, needles, and blades. Sampling devices may be customized to impart exhaustive or equilibrium-based characteristics to the extraction method. Equilibrium-based approaches may rely on additional methods for calibration, such as diffusion-based or on-fiber kinetic calibration to improve bioanalysis. In addition, microextraction-based methods may enable minimally invasive sampling protocols and measure the average free concentration of analytes in heterogeneous multiphasic biological systems. On-fiber derivatization has evidenced new opportunities for targeted and untargeted analysis in metabolomics. All these advantages have highlighted the potential of microextraction techniques for in vivo and on-site sampling and sample preparation, while many opportunities are still available for laboratory protocols. In this review, we outline and discuss some of the most recent applications using microextractions techniques for comprehensive two-dimensional gas chromatography-based metabolomics, including potential research opportunities.

Electrochemical impedance spectroscopy measurements for determination of derivatized aldehydes in several matrices

A simple, selective and sensitive electrochemical method is described for the determination of different aldehydes at glassy carbon electrode using electrochemical impedance spectroscopy (EIS). The measurements were performed after their derivatization with 2,4-dinitrophenylhydrazine (DNPH) in acidic medium. The impedance measurements were investigated in the frequency range from 100 mHz to 100 kHz at a potential of 1.0 V versus Ag/AgCl. The Nyquist plots were modeled with a Randle's equivalent circuit. The charge transfer resistance was identified as the dependent parameter on relevant concentration of aldehydes (determined as their hydrazones). Under the optimized conditions, the linearity was established over the concentration range of 1000-0.05 μmol L^-1. The limits of detection (LODs) obtained were from 0.097 to 0.0109 μmol L^-1. Finally, the developed method has been applied to the determination of aldehydes in drinking water, orange juice and apple vinegar samples with relative standard deviations (RSDs) < 3.1% and acceptable recovery rate (around of 80%).

Variations in headspace microextraction procedures and current applications in bioanalysis

In sample preparation, analytes are extracted from the sample and concentrated in a solvent compatible with analytical instrumentation. Some drawbacks are usually associated with the procedures traditionally used, namely the amounts of organic solvents that need to be properly discarded and the presence of several interferences which may impair analyte identification and quantitation. Headspace microextraction procedures have appeared as a promising solution to overcome these problems. On the one hand, being microextraction techniques, the amount of solvent and sample is reduced; on the other hand, since it is the headspace above the specimen which is sampled rather than the sample itself, analytical interferences are minimized, prolonging the lifetime of the devices and analytical instrumentation.

Microextraction in urine samples for gas chromatography: a review

Since the complexity origin of biological samples, the research trends have been directed to the development of new miniaturized sample preparation techniques. This review provides a comprehensive survey of past and present microextraction methods followed by GC analysis for preconcentration and determination of various analytes in urine samples. These techniques have been classified in three general groups, including liquid-, solid- and membrane-based techniques. The principal of different microextraction methods that are located in each general group as well as their various extraction modes and the recent developments introduced for them has been presented. Subsequently, a comparison survey has been carried out among different microextraction techniques and finally a future perspective has been predicted based on the existing literature.

Chromatographic determination of low-molecular mass unsaturated aliphatic aldehydes with peroxyoxalate chemiluminescence detection after fluorescence labeling with 4-(N,N-dimethylaminosulfonyl)-7-hydrazino-2,1,3-benzoxadiazole

A highly sensitive, selective and reproducible chromatographic method is described for determination of low-molecular mass unsaturated aliphatic aldehydes in human serum. The method combines fluorescent labeling using 4-(N,N-Dimethylaminosulfonyl)-7-hydrazino-2,1,3-benzoxadiazole with peroxyoxalate chemiluminescence. The derivatives were separated on a reversed-phase column C8 isocratically using a mixture of acetonitrile and 90mM imidazole-HNO3 buffer (pH 6.4, 1:1, % v/v). The calibration ranges were: 20-420nM for methylglyoxal, 16-320nM for acrolein, 15-360nM for crotonaldehyde and 20-320nM for trans-2-hexenal. The detection limits were ranged from 4.4 to 6.5nM (88-130fmol/injection), the recovery results were within the range of 87.4-103.8% and the intra and inter-day precision results were lower than 5.5%. The proposed validated method has been successfully applied to healthy, diabetic and rheumatic arthritis patients' sera with simple pretreatment method. In conclusion, this new method is suitable for routine analysis of large numbers of clinical samples for assessment of the oxidative stress state in patients.

Liquid-phase microextraction in bioanalytical sample preparation

Liquid-phase microextraction (LPME) emerged in the mid-to-late 1990s, facing up to the main shortcomings of the classical liquid-liquid extraction. Since its origin, this new technique has been in continuous development driven by its successful and widespread use in the analytical sciences. Its inherent properties, such as low sample volume requirement, high preconcentration factors achieved and excellent sample clean-up, make LPME a very useful technique for bioanalytical sample preparation. This review focuses on the main LPME-related techniques, predominantly single-drop microextraction and supported hollow-fiber LPME, paying particular attention to the bioanalytical applications. A general view of the essential trends, including the description of promising extraction modes and solvents, is also highlighted.

Single-drop microextraction in bioanalysis

Bioanalysis usually requires a preparation procedure for sample cleanup or preconcentration. Conventional sample preparation techniques are often time consuming and labor intensive. Among recent progress in sample preparation, single drop microextraction (SDME) is one of the most efficient techniques providing both sample cleanup and preconcentration capabilities. In SDME, analytes are extracted from a sample solution into an acceptor drop and the drop is introduced to subsequent analysis. Since the volume of the acceptor drop is 1–10 µl or less, the consumption of solvents can be minimized and the preconcentration effect is enhanced. In this review, the basic principles of two-phase and three-phase SDME are described briefly and then recently developed modes of SDME, coupling with analytical instruments, and methods to enhance the drop stability are discussed. Recent applications of SDME to biological samples, including urine, blood and saliva, for the analysis of drugs, metal ions and biomarkers are reviewed.

Analysis of volatile aldehyde biomarkers in human blood by derivatization and dispersive liquid-liquid microextraction based on solidification of floating organic droplet method by high performance liquid chromatography

A new dispersive liquid-liquid microextraction based on solidification of floating organic droplet method (DLLME-SFO) was developed for the determination of volatile aldehyde biomarkers (hexanal and heptanal) in human blood samples. In the derivatization and extraction procedure, 2,4-dinitrophenylhydrazine (DNPH) as derivatization reagent and formic acid as catalyzer were injected into the sample solution for derivatization with aldehydes, then the formed hydrazones was rapidly extracted by dispersive liquid-liquid microextraction with 1-dodecanol as extraction solvent. After centrifugation, the floated droplet was solidified in an ice bath and was easily removed for analysis. The effects of various experimental parameters on derivatization and extraction conditions were studied, such as the kind and volume of extraction solvent and dispersive solvent, the amount of derivatization reagent, derivatization temperature and time, extraction time and salt effect. The limit of detections (LODs) for hexanal and heptanal were 7.90 and 2.34nmolL(-1), respectively. Good reproducibility and recovery of the method were also obtained. The proposed method is an alternative approach to the quantification of volatile aldehyde biomarkers in complex biological samples, being more rapid and simpler and providing higher sensitivity compared with the traditional dispersive liquid-liquid microextraction (DLLME) methods.

Headspace microextraction: recent bioanalytical applications and issues

Headspace microextraction has already been established as the method of choice for analyzing volatiles blended in complex matrices, such as environmental, food and biological samples. The modern trend of analytical chemistry for ‘going small’ has led to the successful development of various sorbing materials and microextraction techniques. As it is anticipated, microextraction is usually combined with powerful separation and optical techniques permitting enhanced recoveries of analytes, selectivity and sensitivity. In addition, derivatization reactions are often employed for improved detectability of several classes of compounds. Volatile compounds of biological significance are key substances due to the fact that they may constitute a characteristic of the status of the organism. A closer look at the biological applications of the headspace microextraction techniques (solid-phase and single drop microextraction) is the primary aim of this review. The variability of biological samples and analytes are considered primarily, while derivatization and optimization strategies are also discussed.

Single drop microextraction--development, applications and future trends

Single drop microextraction (SDME) has emerged over the last 10-15 years as one of the simplest and most easily implemented forms of micro-scale sample cleanup and preconcentration. In the most common arrangement, an ordinary chromatography syringe is used to suspend microliter quantities of extracting solvent either directly immersed in the sample, or in the headspace above the sample. The same syringe is then used to introduce the solvent and extracted analytes into the chromatography system for identification and/or quantitation. This review article summarizes the historical development and various modes of the technique, some theoretical and practical aspects, recent trends and selected applications.

Extraction and derivatization in single drop coupled to MALDI-FTICR-MS for selective determination of small molecule aldehydes in single puff smoke

Extraction and derivatization in single drop (EDSD) coupled to matrix-assisted laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (MALDI-FTICR-MS) was utilized to determine small molecular aldehydes (SMAs) in single puff smoke. A methanol solution of diphenylamine, 2,5-dihydroxybenzoic acid was used for extraction/derivatization of SMAs and a microdrop of the extraction solution containing the ionic derivatization products of SMAs could be directly deposited in the MALDI target to perform the measurement of SMAs in the cigarette smoke on puff level by MALDI-FTICR-MS. As a result, a consecutive operation of sample pre-treating and MALDI sample plate preparation was achieved. SMAs were derivatized by the reaction with diphenylamine and transformed a stable Schiff base bearing a quaternary ammonium group, and the sensitivity of analysis for SMAs was significantly improved. Good sample homogeneity in in-dot was achieved by adding diphenylamine into the solvent for EDSD and a satisfying repeatability (R.S.D.=7.3% for formaldehyde, n=5) of MALDI-FTICR-MS signals was obtained. This solvent- and reagent-minimized approach with an automatic potential provided a simple, rapid, and accurate procedure for the determination of SMAs in smoke.