Part-per-trillion level detection of estradiol by competitive fluorescence immunoassay using DNA/dye conjugate as antibody multiple labels

A High-Throughput Platform for the Rapid Quantification of Phosphorylated Histone H2AX in Cell Lysates Based on Microplate Electrochemiluminescence Immunosensor Array

Sensitive detection of phosphorylated histone H2AX (γH2AX) in cells as a biomarker of DNA double-strand breaks has great significance in the field of molecular toxicology and life science research. However, current γH2AX detection methods require labor- and time-consuming steps. Here, for the first time, we designed a simple electrochemiluminescence (ECL) immunoassay integrated with a microplate-based sensor array to realize sensitive and high-throughput detection of γH2AX in cell lysates. Under the optimized conditions, this ECL immunosensor array could linearly respond to γH2AX concentrations in the range from 2 × 10² to 1 × 10⁵ pg/mL. In addition, our approach possessed excellent specificity and satisfactory reproducibility, and its practicality was verified in real cell lysates. The whole process including instrumental and manual operation was completed in no more than 3 h. This study provides a convenient and rapid alternative method for the sensitive quantification of γH2AX, which shows promising application in high-throughput screening of genotoxic chemicals and drug candidates.

Rapid fluorescence immunoassay of benzo[a]pyrene in mainstream cigarette smoke based on a dual-functional antibody–DNA conjugate

Benzo[a]pyrene (BaP) is considered as one of the most carcinogenic pollutants in cigarette smoke. The development of simple and sensitive BaP screening methods can help assess the risk of cigarette exposure to the human body rapidly. In this report, a rapid fluorescence immunoassay (RFIA) method for the detection of BaP is proposed, the core of which is the synthesis of bifunctional covalent antibody–DNA conjugates for target recognition and signal amplification. Based on the optimization of the SYBR Green I and PAH–BSA concentrations, as well as DNA–antibody immune complex's dilution in the RFIA system, a serial dilution of BaP was tested with this method. The results showed that the linear working range of the RFIA for BaP is 0.46 to 333 ng mL⁻¹, which is much wider than traditional ELISA. The detection limit was 0.32 ng mL⁻¹, which was more sensitive than other methods such as the redox-labeled electrochemical immunoassay method and the competitive piezoelectric biosensor. Then the cross-reactions (CR) of other PAHs in cigarette smoke were evaluated using this RFIA and found that the cross-reactions of naphthalene, anthracene, and pyrene were very low (<1%). The cross-reaction in this RFIA system can be reduced by improving the specificity of the antibody. To the best of our knowledge, this is the first time that the BaP in mainstream cigarette smoke was tested; the RFIA demonstrates fast and simple experimental manipulations and better working curves and sensitivity.

Benzo[a]pyrene (BaP) is considered as one of the most carcinogenic pollutants in cigarette smoke.

Chemiluminescence immunoassays for estradiol and ethinylestradiol based on new biotinylated estrogen derivatives

New chemiluminescence-based immunoassays for sensitive detection of 17-β estradiol (E2) and ethinylestradiol (EE2) are described on the basis of the use of biotinylated estrogen derivatives. Estrogen derivatives bearing a carboxylic group (E2-COOH and EE2-COOH) on C-3 position were synthesized, covalently bound to aminated biotin and subsequently immobilized on avidin-coated microtiter plates. The assay principle was based on competition between free and immobilized estrogens for their binding to primary antibodies, with subsequent revelation using horseradish peroxidase (HRP)-labeled secondary antibodies. Under optimized conditions, the chemiluminescence immunoassays showed a highly sensitive response to E2 and EE2, with respective detection limits of 0.5 and 1.2 ng L^-1. The LOD achieved using biotinylated E2 was in the same order of magnitude as those obtained using commercially available E2-bovine serum albumin conjugate (E2-BSA). The developed devices were successfully applied to analysis wastewater treatment plants effluents (WWTP) with negligible matrix effect.

Asymmetric split H-shape nanoantennas for molecular sensing

In this paper we report on a very sensitive biosensor based on gold asymmetric nanoantennas that are capable of enhancing the molecular resonances of C-H bonds. The nanoantennas are arranged as arrays of asymmetric-split H-shape (ASH) structures, tuned to produce plasmonic resonances with reflectance double peaks within the mid-infrared vibrational resonances of C-H bonds for the assay of deposited films of the molecule 17β-estradiol (E2), used as an analyte. Measurements and numerical simulations of the reflectance spectra have enabled an estimated enhancement factor on the order of 10⁵ to be obtained for a thin film of E2 on the ASH array. A high sensitivity value of 2335 nm/RIU was achieved, together with a figure of merit of approximately 8. Our experimental results were corroborated using numerical simulations for the C-H stretch vibrational resonances from the analyte, superimposed on the plasmonic resonances of the ASH nanoantennas.

DNA-Redox Cation Interaction Improves the Sensitivity of an Electrochemical Immunosensor for Protein Detection

A simple DNA-redox cation interaction enhancement strategy has been developed to improve the sensitivity of electrochemical immunosensors for protein detection. Instead of labeling with fluorophores or redox-active groups, the detection antibodies were tethered with DNA single strands. Based on the electrostatic interaction between redox cations ([Ru(NH₃)₆]³⁺) and negatively charged DNA backbone, enhanced electrochemical signals were obtained. Human chorionic gonadotropin (hCG) detection has been performed as a trial analysis. A linear response range up to the concentration of 25 mIU/mL and a detection limit of 1.25 mIU/mL have been achieved, both are comparable with the ultrasensitive enzyme-linked immunosorbent assay (ELISA) tests. The method also shows great selectivity towards hCG over other hormones such as thyroid stimulating hormone (TSH) and follicle stimulating hormone (FSH). By and large, our approach bears the merits of cost effectiveness and simplicity of instrumentation in comparison with conventional optical detection methods.

Detection of 17β-estradiol in water samples by a novel double-layer molecularly imprinted film-based biosensor

This study reports a novel double-layer molecularly imprinted film (MIF)-based biosensor for rapid, sensitive and highly selective detection of small molecule 17β-estradiol (E2) that is frequently detected in environmental water samples. In this system, the modification of gold surface of SPR chip was performed by 1-dodecanethiol. Then double-layer MIF was generated on the 1-dodecanethiol modified gold surface. The non-modified and imprinted surfaces were characterized by atomic force microscopy (AFM), scanning electron microscope (SEM) and contact angle measurements. Analysis of surface plasmon resonance (SPR) spectroscopy showed that the imprinted sensing film displayed good selectivity for E2 compared to other analog molecules and NIF. A good linear relationship was obtained between the SPR angle and E2 concentrations over a range of 2.50×10(-13)-2.50×10(-)(9)mol/L (R(2)=0.993) with the lowest measurable concentration of 2.50×10(-13)mol/L. The sensor can be regenerated with the mixture of acetic acid and PBS buffer (v/v=1:9) as a desorption agent over tens of times without significant deterioration of the sensor performance. Potential interference of real environmental sample matrix was assessed by spiked samples in several waste seawater effluents. This portable sensor system can be successfully applied for on-site real-time inexpensive and easy-to-use monitoring of E2 or other small molecule pollutants in environmental samples such as effluents or water bodies.

Development of indirect competitive fluorescence immunoassay for 2,2',4,4'-tetrabromodiphenyl ether using DNA/dye conjugate as antibody multiple labels

An indirect competitive fluorescence immunoassay using a DNA/dye conjugate as antibody multiple labels was developed on 96-well plates for the identification and quantification of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) in aqueous samples. A hapten, 2,4,2'-tribromodiphenyl ether-4'-aldehyde, was synthesized, and was conjugated to bovine serum albumin to form a coating antigen. Specific recognition of the antigen by anti-PBDE antiserum was confirmed by a surface plasmon resonance measurement. In the immunoassay, the coating antigen was adsorbed on a 96-well plate first, and a sample, antiserum and biotinylated goat anti-rabbit secondary antibody were then added and reacted sequentially. A biotinylated, double-stranded DNA with 219 base pairs was attached to the secondary antibody by using streptavidin as a molecular bridge. In situ multiple labeling of the antibody was accomplished after addition of a DNA-binding fluorescent dye, SYBR Green I. The working range of the immunoassay for the BDE-47 standard was 3.1-390 microg/L, with an IC50 value of 15.6 microg/L. The calculated LOD of the immunoassay is 0.73 microg/L. The immunoassay demonstrated relatively high selectivity for BDE-47, showing very low cross-reactivity (< 3%) with BDE-15, BDE-153 and BDE-209. With a spiked river water sample containing 50 microg/L BDE-47, quantification by the immunoassay was 41.9 microg/L, which compared well with the standard GC-ECD method (45.7 microg/L). The developed immunoassay provides a rapid screening tool for polybrominated diphenyl ethers in environmental samples.

Dye/DNA conjugates as multiple labels for antibodies in sensitive fluorescence immunoassays

Fluorescence immunoassays are widely used in life science research, medical diagnostics, and environmental monitoring due to the intrinsically high specificity, simplicity, and versatility of immunoassays as well as the availability of a large variety of fluorescent labeling molecules. However, the sensitivity of immunoassays needs to be improved further to meet the ever-increasing demands of the new proteomics era. We have developed a novel and simple method to increase immunoassay sensitivity by attaching multiple fluorescent labels on an antibody with a dye/DNA conjugate. Our strategy is to use a DNA fragment as a molecular carrier to attach multiple fluorescent dyes to an antibody at a single site. The dye/DNA conjugate is not presynthesized, but rather formed in situ as part of the immunoassay. Our results demonstrate that by using a 219-bp DNA fragment in conjunction with SYBR Green I fluorescent DNA-binder, the sensitivity of both direct and competitive fluorescence immunoassays is improved by orders of magnitude, reaching a lower detection limit of 1.9 pg/mL for 17β-estradiol.

Microwave-assisted synthesis of thiophene fluorophores, labeling and multilabeling of monoclonal antibodies, and long lasting staining of fixed cells

We report the expedient microwave-assisted synthesis of thiophene based 4-sulfo-2,3,5,6,-tetrafluorophenyl esters whose molecular structure was engineered to achieve blue to red bright fluorescence. The reactivity toward monoclonal antibodies of the newly synthesized fluorophores was analyzed in comparison with that of the corresponding N-succinimidyl esters. Single-fluorophore and multiple-fluorophore labeled antibodies were easily prepared with both types of esters. Multiple-fluorophore labeling with blue and orange emitting fluorophores resulted in white fluorescent antibodies. Thiophene based fluorophores displayed unprecedented fluorescence stability in immunostaining experiments. First-principles TD-DFT theoretical calculations helped us to interpret the behavior of fluorescence emission in different environments.