Combining nanosurface chemistry and microfluidics for molecular analysis and cell biology

A Three-Dimensional Micromixer Using Oblique Embedded Ridges

A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting-recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting-recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

Advances in Micro/Nanoporous Membranes for Biomedical Engineering

Porous membrane materials at the micro/nanoscale have exhibited practical and potential value for extensive biological and medical applications associated with filtration and isolation, cell separation and sorting, micro-arrangement, in-vitro tissue reconstruction, high-throughput manipulation and analysis, and real-time sensing. Herein, an overview of technological development of micro/nanoporous membranes (M/N-PMs) is provided. Various membrane types and the progress documented in membrane fabrication techniques, including the electrochemical-etching, laser-based technology, microcontact printing, electron beam lithography, imprinting, capillary force lithography, spin coating, and microfluidic molding are described. Their key features, achievements, and limitations associated with micro/nanoporous membrane (M/N-PM) preparation are discussed. The recently popularized applications of M/N-PMs in biomedical engineering involving the separation of cells and biomolecules, bioparticle operations, biomimicking, micropatterning, bioassay, and biosensing are explored too. Finally, the challenges that need to be overcome for M/N-PM fabrication and future applications are highlighted.

Microfluidic and Microscale Assays to Examine Regenerative Strategies in the Neuro Retina

Bioengineering systems have transformed scientific knowledge of cellular behaviors in the nervous system (NS) and pioneered innovative, regenerative therapies to treat adult neural disorders. Microscale systems with characteristic lengths of single to hundreds of microns have examined the development and specialized behaviors of numerous neuromuscular and neurosensory components of the NS. The visual system is comprised of the eye sensory organ and its connecting pathways to the visual cortex. Significant vision loss arises from dysfunction in the retina, the photosensitive tissue at the eye posterior that achieves phototransduction of light to form images in the brain. Retinal regenerative medicine has embraced microfluidic technologies to manipulate stem-like cells for transplantation therapies, where de/differentiated cells are introduced within adult tissue to replace dysfunctional or damaged neurons. Microfluidic systems coupled with stem cell biology and biomaterials have produced exciting advances to restore vision. The current article reviews contemporary microfluidic technologies and microfluidics-enhanced bioassays, developed to interrogate cellular responses to adult retinal cues. The focus is on applications of microfluidics and microscale assays within mammalian sensory retina, or neuro retina, comprised of five types of retinal neurons (photoreceptors, horizontal, bipolar, amacrine, retinal ganglion) and one neuroglia (Müller), but excludes the non-sensory, retinal pigmented epithelium.

Visual and real-time imaging focusing for highly sensitive laser-induced fluorescence detection at yoctomole levels in nanocapillaries

We developed a highly sensitive laser-induced fluorescence detection system, involving visual and real-time imaging focusing instead of the use of fluorescent reagents, for the detection of analytes in nanocapillaries.

An enzyme-mediated competitive colorimetric sensor based on Au@Ag bimetallic nanoparticles for highly sensitive detection of disease biomarkers

An Au@Ag nanosensor for highly sensitive, qualitative and quantitative immunoassays.

The Micro/Nanohybrid Structures Enhancing B35 Cell Guidance on Chitosan

A novel chitosan scaffold with micro- and nano-hybrid structures was proposed in this study. The hemispheric array of the barrier layer of an anodic aluminum oxide (AAO) film was used as the substrate. Microelectromechanical systems and nickel electroforming techniques were integrated for fabricating chitosan scaffolds with different micro/nanohybrid structures. Nerve cells were then cultured on the conduits. It was demonstrated that the scaffold with pure microstructures can guide the nerve cells to grow along the ridges of the microstructure and some cells to grow across the groove in between two ridges of the microstructure. It was also shown that the scaffold with microscale ridges and nanopatterns on the groove between two ridges can more effectively guide the cells to grow along the ridges, thus enhancing the proliferation of nerve cells.

A strategy for rapid and facile fabrication of controlled, layered blood vessel-like structures

With the aid of fibrin glue, we wrap thin films into multi-layered tubes with a precisely-arranged cell distribution within 70 min.

Plant cells use auxin efflux to explore geometry

Cell movement is the central mechanism for animal morphogenesis. Plant cell development rather relies on flexible alignment of cell axis adjusting cellular differentiation to directional cues. As central input, vectorial fields of mechanical stress and gradients of the phytohormone auxin have been discussed. In tissue contexts, mechanical and chemical signals will always act in concert; experimentally it is difficult to dissect their individual roles. We have designed a novel approach, based on cells, where directionality has been eliminated by removal of the cell wall. We impose a new axis using a microfluidic set-up to generate auxin gradients. Rectangular microvessels are integrated orthogonally with the gradient. Cells in these microvessels align their new axis with microvessel geometry before touching the wall. Auxin efflux is necessary for this touch-independent geometry exploration and we suggest a model, where auxin gradients can be used to align cell axis in tissues with minimized mechanical tensions.

Chemiluminescence microfluidic system of gold nanoparticles enhanced luminol-silver nitrate for the determination of vitamin B12

A rapid and sensitive chemiluminescence (CL) system coupled with a microfluidic chip has been presented to determine vitamin B12 (VB12) based on the reaction of luminol and silver nitrate (AgNO(3)) in the presence of gold nanoparticles (AuNPs). A microfluidic chip was fabricated by a soft-lithographic procedure using polydimethyl siloxane (PDMS) having four inlets and one outlet with a 200 μm wide, 250 μm deep, and 100 mm long microchannel. Ag(+) was used as a chemiluminogenic oxidant in this CL reaction which oxidized luminol to produce strong CL signal in the presence of AuNPs. Luminol reacted with AgNO(3) under the catalysis of AuNPs to produce luminol radicals which reacted with dissolved oxygen and emitted CL light. The proposed CL system was applied to determine the amount of VB12 in VB12 tablets and multivitamin. Under the optimum conditions, the CL intensity of the system was increased with the concentration of VB12 in the range of 0.25-100 ng mL(-1) with the correlation coefficient of 0.9982. The limit of detection was found to be 0.04 ng mL(-1) with the relative standard deviation of 1.56 % for five replicate determinations of 25 ng mL(-1) of VB12. The CL reaction mechanism was demonstrated by UV-visible spectra and CL emission spectra.

Dynamic actin controls polarity induction de novo in protoplasts

Cell polarity and axes are central for plant morphogenesis. To study how polarity and axes are induced de novo, we investigated protoplasts of tobacco Nicotiana tabacum cv. BY-2 expressing fluorescently-tagged cytoskeletal markers. We standardized the system to such a degree that we were able to generate quantitative data on the temporal patterns of regeneration stages. The synthesis of a new cell wall marks the transition to the first stage of regeneration, and proceeds after a long preparatory phase within a few minutes. During this preparatory phase, the nucleus migrates actively, and cytoplasmic strands remodel vigorously. We probed this system for the effect of anti-cytoskeletal compounds, inducible bundling of actin, RGD-peptides, and temperature. Suppression of actin dynamics at an early stage leads to aberrant tripolar cells, whereas suppression of microtubule dynamics produces aberrant sausage-like cells with asymmetric cell walls. We integrated these data into a model, where the microtubular cytoskeleton conveys positional information between the nucleus and the membrane controlling the release or activation of components required for cell wall synthesis. Cell wall formation is followed by the induction of a new cell pole requiring dynamic actin filaments, and the new cell axis is manifested as elongation growth perpendicular to the orientation of the aligned cortical microtubules.

Microfluidics for manipulating cells

Microfluidics, a toolbox comprising methods for precise manipulation of fluids at small length scales (micrometers to millimeters), has become useful for manipulating cells. Its uses range from dynamic management of cellular interactions to high-throughput screening of cells, and to precise analysis of chemical contents in single cells. Microfluidics demonstrates a completely new perspective and an excellent practical way to manipulate cells for solving various needs in biology and medicine. This review introduces and comments on recent achievements and challenges of using microfluidics to manipulate and analyze cells. It is believed that microfluidics will assume an even greater role in the mechanistic understanding of cell biology and, eventually, in clinical applications.

Microfluidic assay without blocking for rapid HIV screening and confirmation

The essential step for HIV spreading limitation is the screening tests. However, there are multiple disadvantages in current screening assays which need further confirmation test. Herein we developed a rapid HIV assay combining screening and confirmation test by using the microfluidic network assay. Meanwhile, the assay is accelerated by bypassing the step of blocking. We call this method as microfluidic assay without blocking (MAWB). Both the limit of detection and reagent incubation time of MAWB are determined by screening of one model protein pair: ovalbumin and its antibody. The assay time is accelerated about 25% while the limit of detection (LOD) is well kept. Formatting the method in for both HIV screening (testing 8 HIV-related samples) and confirmation (assaying 6 kinds of HIV antibodies of each sample) within 30 min was successful. Fast HIV screening and confirmation of 20 plasma samples were also demonstrated by this method. MAWB improved the assay speed while keeping the LOD of conventional ELISA. Meanwhile, both the accuracy and throughput of MAWB were well improved, which made it an excellent candidate for a quick HIV test for both screening and confirmation. Methods like this one will find wide applications in clinical diagnosis and biochemical analysis based on the interactions between pairs of molecules.

Accelerating microfluidic immunoassays on filter membranes by applying vacuum

This paper describes a vacuum-accelerated microfluidic immunoassay (we abbreviate it as VAMI) by sandwiching a filter membrane between a two-layer chip. A direct assay of IgG demonstrated that VAMI could simultaneously achieve higher sensitivity and require less time compared with conventional microfluidic immunoassays. We further applied VAMI to carry out a 3-step competitive assay (including antigen immobilization, competitive reaction and 2(nd) antibody reaction) for detecting the illegal food additive Sudan Red. A total assay time of 15 min with a limit of detection (LOD) of 1 ng ml(-1) is achieved.

Surface coating as a key parameter in engineering neuronal network structures in vitro

By quantitatively comparing a variety of macromolecular surface coating agents, we discovered that surface coating strongly modulates the adhesion and morphogenesis of primary hippocampal neurons and serves as a switch of somata clustering and neurite fasciculation in vitro. The kinetics of neuronal adhesion on poly-lysine-coated surfaces is much faster than that on laminin and Matrigel-coated surfaces, and the distribution of adhesion is more homogenous on poly-lysine. Matrigel and laminin, on the other hand, facilitate neuritogenesis more than poly-lysine does. Eventually, on Matrigel-coated surfaces of self-assembled monolayers, neurons tend to undergo somata clustering and neurite fasciculation. By replacing coating proteins with cerebral astrocytes, and patterning neurons on astrocytes through self-assembled monolayers, microfluidics and micro-contact printing, we found that astrocyte promotes soma adhesion and astrocyte processes guide neurites. There, astrocytes could be a versatile substrate in engineering neuronal networks in vitro. Besides, quantitative measurements of cellular responses on various coatings would be valuable information for the neurobiology community in the choice of the most appropriate coating strategy.

Electrospun fiber template for replica molding of microtopographical neural growth guidance

A method for replica molding electrospun (ES) fibers on the surface of polydimethylsiloxane (PDMS) is developed for culturing and guiding of cells, instead of ES fibers. With this method, microgrooves and microstructures composed of microgrooves can be obtained. PDMS is integrated into the microfluidic chip as a substrate to successfully pattern and guide neurites on the PDMS surface with microgrooves.

Self-organizing circuit assembly through spatiotemporally coordinated neuronal migration within geometric constraints

BACKGROUND

Neurons are dynamically coupled with each other through neurite-mediated adhesion during development. Understanding the collective behavior of neurons in circuits is important for understanding neural development. While a number of genetic and activity-dependent factors regulating neuronal migration have been discovered on single cell level, systematic study of collective neuronal migration has been lacking. Various biological systems are shown to be self-organized, and it is not known if neural circuit assembly is self-organized. Besides, many of the molecular factors take effect through spatial patterns, and coupled biological systems exhibit emergent property in response to geometric constraints. How geometric constraints of the patterns regulate neuronal migration and circuit assembly of neurons within the patterns remains unexplored.

METHODOLOGY/PRINCIPAL FINDINGS

We established a two-dimensional model for studying collective neuronal migration of a circuit, with hippocampal neurons from embryonic rats on Matrigel-coated self-assembled monolayers (SAMs). When the neural circuit is subject to geometric constraints of a critical scale, we found that the collective behavior of neuronal migration is spatiotemporally coordinated. Neuronal somata that are evenly distributed upon adhesion tend to aggregate at the geometric center of the circuit, forming mono-clusters. Clustering formation is geometry-dependent, within a critical scale from 200 µm to approximately 500 µm. Finally, somata clustering is neuron-type specific, and glutamatergic and GABAergic neurons tend to aggregate homo-philically.

CONCLUSIONS/SIGNIFICANCE

We demonstrate self-organization of neural circuits in response to geometric constraints through spatiotemporally coordinated neuronal migration, possibly via mechanical coupling. We found that such collective neuronal migration leads to somata clustering, and mono-cluster appears when the geometric constraints fall within a critical scale. The discovery of geometry-dependent collective neuronal migration and the formation of somata clustering in vitro shed light on neural development in vivo.

Interdigitated comb-like electrodes for continuous separation of malignant cells from blood using dielectrophoresis

In this paper, a method for continuous flow separation of circulating malignant cells from blood in a microfluidic device using dielectrophoresis is discussed. Separation of MDA231 breast cancer cells after mixing with normal blood cells was achieved with a level of accuracy that enabled precise counting of the malignant cells, separation and eventually, sub-culturing. MDA231 cells were separated from the blood to a daughter channel using two pairs of interdigitated activated comb-like electrode structures. All experiments are performed with conductivity adjusted medium samples. The electrode pairs were positioned divergent and convergent with respect to the flow. The AC signals used in the separation are 20 V peak-to-peak with frequencies of 10-50 kHz. The separation is based on balance of magnitude of the dielectrophoretic force and hydrodynamic force. The difference in response between circulating malignant cells and normal cells at a certain band of alternating current frequencies was used for rapid separation of cancer cells from blood. The significance of these experimental results is discussed in this paper, with detailed reporting on the suspension medium, preparation of cells, flow condition and the fabrication process of the microfluidic chip. The present technique could potentially be applied to identify incident cancer at a stage and size that is not yet detectable by standard diagnostic techniques (imaging and biochemical testing). Alternatively, it may also be used to detect cancer recurrences.

Gold nanoparticles for the colorimetric and fluorescent detection of ions and small organic molecules

In recent years, gold nanoparticles (AuNPs) have drawn considerable research attention in the fields of catalysis, drug delivery, imaging, diagnostics, therapy and biosensors due to their unique optical and electronic properties. In this review, we summarized recent advances in the development of AuNP-based colorimetric and fluorescent assays for ions including cations (such as Hg(2+), Cu(2+), Pb(2+), As(3+), Ca(2+), Al(3+), etc) and anions (such as NO(2)(-), CN(-), PF(6)(-), F(-), I(-), oxoanions), and small organic molecules (such as cysteine, homocysteine, trinitrotoluene, melamine and cocaine, ATP, glucose, dopamine and so forth). Many of these species adversely affect human health and the environment. Moreover, we paid particular attention to AuNP-based colorimetric and fluorescent assays in practical applications.

A novel chemiluminescence paper microfluidic biosensor based on enzymatic reaction for uric acid determination

In this work, chemiluminescence (CL) method was combined with microfluidic paper-based analytical device (μPAD) to establish a novel CL μPAD biosensor for the first time. This novel CL μPAD biosensor was based on enzyme reaction which produced H(2)O(2) while decomposing the substrate and the CL reaction between rhodanine derivative and generated H(2)O(2) in acid medium. Microchannels in μPAD were fabricated by cutting method. And the possible CL assay principle of this CL μPAD biosensor was explained. Rhodanine derivative system was used to reach the purpose of high sensitivity and well-defined signal for this CL μPAD biosensor. And the optimum reaction conditions were investigated. The quantitative determination of uric acid could be achieved by this CL μPAD biosensor with accurate and satisfactory result. And this biosensor could provide good reproducible results upon storage at 4°C for at least 10 weeks. The successful integration of μPAD and CL reaction made the final biosensor inexpensive, easy-to-use, low-volume, and portable for uric acid determination, which also greatly reduces the cost and increases the efficiency required for an analysis. We believe this simple, practical CL μPAD biosensor will be of interest for use in areas such as disease diagnosis.

Highly sensitive, colorimetric detection of mercury(II) in aqueous media by quaternary ammonium group-capped gold nanoparticles at room temperature

We provide a highly sensitive and selective assay to detect Hg(2+) in aqueous solutions using gold nanoparticles modified with quaternary ammonium group-terminated thiols at room temperature. The mechanism is the abstraction of thiols by Hg(2+) that led to the aggregation of nanoparticles. With the assistance of solar light irradiation, the detection limit can be as low as 30 nM, which satisfies the guideline concentration of Hg(2+) in drinking water set by the WHO. In addition, the dynamic range of detection is wide (3 × 10(-8)-1 × 10(-2) M). This range, to our best knowledge, is the widest one that has been reported so far in gold nanoparticle (AuNP)-based assays for Hg(2+).

Tailored electroactive and quantitative ligand density microarrays applied to stem cell differentiation

The ability to precisely control the interactions between materials and mammalian cells at the molecular level is crucial to understanding the fundamental chemical nature of how the local environment influences cellular behavior as well as for developing new biomaterials for a range of biotechnological and tissue engineering applications. In this report, we develop and apply for the first time a quantitative electroactive microarray strategy that can present a variety of ligands with precise control over ligand density to study human mesenchymal stem cell (hMSC) differentiation on transparent surfaces with a new method to quantitate adipogenic differentiation. We found that both the ligand composition and ligand density influence the rate of adipogenic differentiation from hMSC's. Furthermore, this new analytical biotechnology method is compatible with other biointerfacial characterization technologies (surface plasmon resonance, mass spectrometry) and can also be applied to investigate a range of protein-ligand or cell-material interactions for a variety of systems biology studies or cell behavior based assays.