Applications of titania and zirconia hollow fibers in sorptive microextraction of N,N-dimethylacetamide from water sample

Recent advances in solid phase microextraction with various geometries in environmental analysis

Solid phase microextraction (SPME) has emerged as a versatile sample preparation technique for the preconcentration of a broad range of compounds with various polarities, especially in environmental studies. SPME has demonstrated its eco-friendly credentials, significantly reducing the reliance on solvents. The use of biocompatible materials as a coating recipe facilitates the acceptance of SPME devices in analytical chemistry, primarily in the monitoring of environmental pollutants such as persistent organic pollutants (POPs), volatile organic compounds (VOCs), and pesticides from the various environmental matrices. During the last few years, investigators have reported an improvement in the SPME enrichment technique after changing the coating recipe, geometries, and sampling procedure from the complex matrices. Furthermore, the development of various geometries of SPME with large surface areas has enhanced the extraction efficiency of environmental pollutants. As a miniaturized sample preparation technique, SPME significantly reduces the solvent usage, suggesting a potential platform for green chemistry-based research for water, air, and soil analysis. This review article summarizes the evolution of SPME, its various modes, the application of SPME, recent innovations, and prospects for the determination of water, air, and soil pollution. The advantages and disadvantages of SPME in comparison to other extraction techniques have been discussed here. This review serves as a valuable resource for investigators working in sustainable environmental research.

Microbial co-culture mediated by intercellular nanotubes during DMAC degradation: Microbial interaction, communication mode, and degradation mechanism

Microbial co-culture has been proven as an effective technique for environmental remediation. In this study, co-culture mechanism of Rhodococcus ruber HJM-8 and Paracoccus communis YBH-X during N,N-dimethylacetamide (DMAC) degradation was studied. The comparison of degradation performance in monoculture and co-culture was presented; due to the efficient cooperation between the two strains via parallel and cascaded degradation, the removal efficiency of total nitrogen (TN) in co-culture could reach 90.1%, which was 1.35 and 1.21 times higher than that of HJM-8 and YBH-X, respectively. Then the communication mode of co-culture during DMAC degradation was determined as contact-independent and contact-dependent interactions between microorganisms. Meanwhile, intercellular nanotube between HJM-8 and YBH-X was found as a unique contact-dependent interaction. The cell staining experiments and RNA sequencing analyses revealed that the nanotube could be used as a bridge to exchange cytoplasmic molecules, and thus improved material transfer and enhanced cell connection in co-culture. The results of KEGG pathway showed that differentially expressed genes in co-culture have an association with cell metabolism, nanotube generation, and genetic material transfer. Furthermore, a mechanism diagram of DMAC biodegradation was proposed for co-culture, indicating that bidirectional cooperation was established between HJM-8 and YBH-X which was mediated by the conversions of acetate and nitrogen. Finally, the co-culture system was validated for treatment of an actual wastewater; results indicated that removal efficiencies of 100% and 68.2% were achieved for DMAC and TN, respectively, suggesting that co-culture had the potential for application.

Covalent organic framework-V modified porous polypropylene hollow fiber with detachable dumbbell-shaped structure for stir bar sorptive extraction of benzophenones

Polypropylene hollow fiber is a kind of ideal material for stir bar sorptive extraction (SBSE) which possesses the advantages of porous structure, large specific surface area, high mechanical strength, and good solvent resistance. In this work, a novel SBSE device using the polypropylene hollow fiber-based stir bar with the detachable dumbbell-shaped structure was designed and prepared. Covalent organic framework-V (COF-V), which possesses porous structure, sphere shape with large specific surface area, was synthesized at room temperature and grown on polypropylene hollow fiber by polydopamine modification method. Compared with previous studies which used etched poly(ether ether ketone) as supporting material, polypropylene hollow fiber omitted the complicated, difficult and dangerous pretreatment process with high concentrated sulfuric acid. The immobilization of COF-V on the polypropylene hollow fiber significantly endows them with multiple interaction abilities including hydrophobic interaction and π-π interaction. The stir bar showed good performance and stability for the extraction of four benzophenones including BP-1, BP-6, BP-3 and Ph-BP. By coupling with HPLC-UV, the COF-V@polypropylene hollow fiber based SBSE method showed wide linear range (0.1-200 ng/mL), excellent linearity (R² ≥ 0.9979), high sensitivity (LODs in the range of 0.02-0.03 ng/mL), and good repeatability (RSD ≤ 5.21%). This method was successfully applied to the analysis of benzophenones in soil and sunscreen samples.

Simultaneously enhanced degradation of N, N-dimethylacetamide and reduced formation of iron sludge by an efficient electrolysis catalyzed ozone process in the presence of dissolved silicate

The generation of sludge is the main issue in iron-based electrochemical techniques. Interestingly, in this study, the effluent was totally limpid and iron sludge did not generate when dissolved silicate (Na₂SiO₃) was used as the electrolyte in an electrolysis catalyzed ozone (ECO-Na₂SiO₃) system. More importantly, the pseudo-first-order rate constants (0.112 min^-1) for DMAC degradation in ECO-Na₂SiO₃ process was much higher than those of ECO systems using other electrolytes. An inhibition film formed on the iron electrode surface was identified to inhibit excess corrosion of iron electrodes and efficiently catalyze decomposition of ozone simultaneously. It was confirmed that hydroxyl radical (^•OH) played a dominant role for the degradation of DMAC, and O₂^•- and H₂O₂ were also contained in ECO-Na₂SiO₃ system. The contributions of contained oxidative reactions in ECO-Na₂SiO₃ system were quantitatively evaluated. Finally, the degradation pathway of DMAC was proposed. This work provides an effective way for protecting electrode from corrosion in electrochemical process.

A 96-Monolithic inorganic hollow fiber array as a new geometry for high throughput solid-phase microextraction of doxorubicin in water and human urine samples coupled with liquid chromatography-tandem mass spectrometry

Innovations in extraction phases, extraction modes and hyphenated instrument configurations, are the most important issues to address for progress in the solid phase microextraction (SPME) methodology. In this regard, we have embarked on the development of a novel biocompatible 96-monolithic inorganic hollow fiber (96-MIHF) array as a new configuration for high-throughput SPME on a 96-well plate system. An arrangement of highly ordered 96 titania/Hydroxyapatite (TiO₂/HAP) nanocomposite hollow fibers and corresponding stainless-steel needles on a Teflon plate holder were used as the extraction module. The inorganic hollow fibers were prepared via a rapid and reproducible template approach (Polypropylene hollow fiber) in combination with a sol-gel method in the presence of polyvinyl alcohol (PVA), as a network maker. The hollow fiber-shape sorbents were obtained with excellent precision by weight (RSD% = 4.98, n = 10) and length (RSD% = 1.08, n = 10) criteria. The proposed design can overcome a number of geometrically dependent drawbacks of conventional high-throughput SPME methods, mainly the ones related to sorbent amount and surface area due to possessing inner/outer surfaces without additional internal supports. The SPME platform, for the first time, was successfully applied for the extraction and preconcentration of doxorubicin from urine and water media without requiring sample preparation and free from significant matrix effect. The extracted analyte was analyzed by liquid chromatography-ion trap tandem mass spectrometry (LC-MS/MS). Highly satisfactory analytical figures of merit were obtained under optimized conditions. The limit of detection (LOD), limit of quantification (LOQ) and linearity of determination were 0.1 ng mL^-1, 0.25 ng mL^-1 and 0.25 to 4000 ng mL^-1, respectively. The interday, intraday and inter sorbent precisions for three concentration levels ranged from 2.01 to 8.09 % (n = 3), 1.02 to 8.65 % (n = 5) and 0.99 to 1.02% (n = 15), respectively. The mean intra-well RSD value for 96 individual wells in 96-MIHF-SPME-LC-MS/MS (n = 3) at the medium concentration level was 7.81%.

Novel electroblowing synthesis of submicron zirconium dioxide fibers: effect of fiber structure on antimony(v) adsorption

Both stable and radioactive antimony are common industrial pollutants. For antimonate (Sb(v)) removal from industrial waste water, we synthesized submicron zirconium dioxide (ZrO₂) fibers by electroblowing and calcination of the as-electroblown fibers. The fibers are amorphous after calcination at 300 and 400 °C and their average diameter is 720 nm. The fibers calcined at 500 to 800 °C have an average diameter of 570 nm and their crystal structure transforms from tetragonal to monoclinic at the highest calcination temperatures. We investigated Sb(v) adsorption capacity of the synthesized ZrO₂ fibers as a function of pH, adsorption isotherm at pH 6 and adsorption kinetics at pH 7. The tetragonal ZrO₂ fibers calcined at 500 °C exhibited the best potential for Sb(v) remediation with Sb(v) uptake of 10 mg g^-1 at pH 2 and a maximum Sb(v) uptake of 8.6 mg g^-1 in the adsorption isotherm experiment. They also reached 30% of 7 days' Sb(v) uptake in only a minute. The adsorption kinetics followed the Elovich model.

Natural mackinawite catalytic ozonation for N, N-dimethylacetamide (DMAC) degradation in aqueous solution: Kinetic, performance, biotoxicity and mechanism

To enhance the degradation of N, N-dimethylacetamide (DMAC) in aqueous solution, the natural mackinawite (NM) is introduced for catalytic ozonation in this study as it is an environmentally friendly catalyst with low cost and easy availability. The properties of the NM were initially characterized via scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Then, impact factors including NM dosage, ozone gas concentration and initial pH were investigated and the optimal conditions (i.e., NM dosage = 3.5 g/L, ozone gas concentration = 300 L/min, initial pH = 6.8) were obtained in NM/O3 process. Besides, the superiority of the NM/O₃ process was confirmed by the experiments that the degradation efficiency of DMAC in the NM/O₃ process (i.e., 95.4%) was much higher than that in the zero-valent iron (ZVI)/O₃ process (i.e., 46.1%) and the synthetic FeS/O₃ process (i.e., 68.6%). Furthermore, the intermediate and possible degradation pathway of DMAC were proposed, and the biological toxicity of the intermediate was subsequently evaluated by the activated sludge. Finally, the mechanism of the NM/O3 process was proposed in this study based on control experiment and radical scavenging experiment. The extraordinary efficiency for DMAC degradation was found to be mainly caused by HO^• of the reactive oxygen species (ROS) (i.e., HO^•, O₂^•- and H₂O₂) generated in the NM/O₃ process. Therefore, this study confirmed that NM was a high efficient catalyst for degradation the toxic and refractory pollutants in catalytic ozonation system.

Insight into a highly efficient electrolysis-ozone process for N,N-dimethylacetamide degradation: Quantitative analysis of the role of catalytic ozonation, fenton-like and peroxone reactions

A highly efficient electrolysis catalyzed ozone (ECO) process was developed for N,N-dimethylacetamide (DMAC) degradation. The pseudo-first-order rate constants (k_obs) of DMAC degradation by ECO process were 1.73-19.09 times greater than those by ozonation and electrolysis processes in a wide pH range of 3.0-10.0. Interestingly, we found O₂^•- could be generated from ozone decomposition by a radical chain mechanism instead of monovalent reduction of O₂ in ECO system at the initial pH of 3.0. Subsequently, the H₂O₂ derived from O₂^•- could participate in Fenton-like and peroxone reactions with the released Fe²⁺ from iron anode and the aerated O₃, respectively. Therefore, the extraordinary DMAC removal efficiency was mainly caused by the more generation of ^•OH through the multiple reactions of homogeneous catalytic ozonation, Fenton-like and peroxone in ECO system. Importantly, the roles of involved reactions in ECO system at various initial pH were quantitatively evaluated according to a series of trapping experiments. The results reveal that the solution pH could significantly affect the contributions of various reactions and convert the reaction mechanisms of multiple reactions in ECO system. Finally, the degradation intermediates were detected to propose a possible DMAC oxidation pathway in the ECO system. This work provides a deep insight into the quantitative analysis of the role of multiple oxidation reactions mechanism and the design of efficient electrochemical advanced oxidation technology for recalcitrant organic pollutant removal.

Biodegradation of N,N-dimethylacetamide by Rhodococcus sp. strain B83 isolated from the rhizosphere of pagoda tree

The biodegradation characteristic and potential metabolic pathway for removal of environmental N,N-dimethylacetamide (DMAC) by Rhodococcus sp. strain B83 was studied. Rhodococcus sp. strain B83 was isolated from the rhizosphere of a pagoda tree and proved capable of utilizing DMAC as sole source of carbon and nitrogen. Batch culture studies showed that strain B83 could tolerate up to 25g/L DMAC and showed distinct growth on possible catabolic intermediates except for acetate. The nitrogen balance analysis revealed that approximately 71% of the initial nitrogen was converted to organic nitrogen. DMAC degradation has led to accumulation of acetate and organic nitrogen, meanwhile traces of nitrate and ammonia was build-up but without nitrite. The growth of strain B83 could be inhibited by adding exogenous acetate. By means of the assay of enzymatic degradation of DMAC, several catabolic intermediates at different intervals were observed and identified. Based on the results obtained from culture solution and enzymatic degradation assay, a detailed pathway is proposed for DMAC biodegradation.

Alumina–titania (Al2O3–TiO2) hollow fiber sorptive microextraction coupled to inductively coupled plasma mass spectrometry for determination of trace elements in diesel and gasoline samples

Application of alumina–titania hollow fiber sorptive microextraction coupled to ICP-MS for simultaneous preconcentration of trace elements in liquid fuel samples.

Membrane solid phase microextraction with alumina hollow fiber on line coupled with ICP-OES for the determination of trace copper, manganese and nickel in environmental water samples

A novel alumina hollow fiber was synthesized by sol-gel template method and was characterized by scanning electron microscopy, N(2) adsorption technique and X-ray diffraction. With the use of prepared alumina hollow fiber as extraction membrane, a new method of flow injection (FI)-membrane solid phase microextraction (MSPME) on-line coupled to inductively coupled plasma-optical emission spectrometry (ICP-OES) was developed for simultaneous determination of trace metals (Cu, Mn and Ni) in environmental water samples. The adsorption capacities of the alumina hollow fiber for Cu, Mn and Ni were found to be 6.6, 8.7 and 13.3 mg g(-1), respectively. With a preconcentration factor of 10, the limits of detection (LODs) for Cu, Mn and Ni were found to be 0.88, 0.61 and 0.38 ng mL(-1), respectively, and the relative standard deviations (RSDs) were ranging from 6.2 to 7.9% (n = 7, c = 10 ng mL(-1)). To validate the accuracy, the proposed method was applied to the analysis of certified reference material GSBZ50009-88 environmental water and the determined values are in good agreement with the certified values. The developed method was also employed for the analysis of Yangtze River water and East Lake water, and the recoveries for the spiked samples were in the range of 87.4-110.2%.