Phosphorescent sensing of carbon dioxide based on secondary inner-filter quenching

Carbon Dioxide Sensing-Biomedical Applications to Human Subjects

Carbon dioxide (CO2) monitoring in human subjects is of crucial importance in medical practice. Transcutaneous monitors based on the Stow-Severinghaus electrode make a good alternative to the painful and risky arterial "blood gases" sampling. Yet, such monitors are not only expensive, but also bulky and continuously drifting, requiring frequent recalibrations by trained medical staff. Aiming at finding alternatives, the full panel of CO2 measurement techniques is thoroughly reviewed. The physicochemical working principle of each sensing technique is given, as well as some typical merit criteria, advantages, and drawbacks. An overview of the main CO2 monitoring methods and sites routinely used in clinical practice is also provided, revealing their constraints and specificities. The reviewed CO2 sensing techniques are then evaluated in view of the latter clinical constraints and transcutaneous sensing coupled to a dye-based fluorescence CO2 sensing seems to offer the best potential for the development of a future non-invasive clinical CO2 monitor.

NIR optical carbon dioxide gas sensor based on simple azaBODIPY pH indicators

Two simple boron-dipyrromethene-type fluorophore (azaBODIPYs) dyes are synthesized and tested for the determination of CO₂ gas by an inner filter process. The indicators are noncovalently entrapped in suitable polymers according to their polarity, featuring absorption maxima at 620 nm and fluorescent emission maxima in the range 675-720 nm. Molar absorptivity and fluorescence quantum yield data were determined for these two synthesized azaBODIPYs. These indicators have high molar absorption coefficients of 7.1 × 10⁴ and 2.1 × 10⁴ M^-1 cm^-1 and quantum yields of 21 and 9%. The pK_a values of the indicators are determined from absorbance and fluorescence measurements with values of 7.9 and 8.5, depending on the positioning of the substitution pattern of the electron-donating functionalities. The two azaBODIPYs present excellent photostability, making them suitable for long duration measurements. These azaBODIPY dyes act as fluorescent pH indicators in a polymeric sensing membrane along with microcrystalline powder of chromium-doped gadolinium aluminium borate as the luminophore, a transfer phase agent (tetraoctyl or tetramethyl ammonium hydroxide) and a plasticizer or surfactant to improve membrane permeability to gaseous CO₂. The response time ranges from 42 to 60 s and recovery time from 103 to 120 s, with a detection limit of 0.04 and 0.57% CO₂. The store time of the sensing membranes is longer than 570 days in the best case, and it does not need to be kept in any special atmosphere other than darkness.

Ionic liquids on optical sensors for gaseous carbon dioxide

This work presents a study on the influence of eight different ionic liquids (ILs) in the composition of dry membranes used for gaseous CO₂ optical sensing. The presence of CO₂ causes a displacement of a colorimetric pH indicator toward its acid form that increases the emission intensity of the luminophore by an inner filter process. The influence of ILs in the membrane on the stability and dynamic behavior-usually the main drawbacks of these sensors-of the membranes is studied. The characterization of the different membranes prepared was carried out and the discussion of the results is presented. In all cases, the response and recovery times improved considerably, with the best case being response times of only 10 s and recovery times of 48 s, compared to response and recovery times of 41 and 100 s, respectively, for membranes without IL. The useful life of the detection membranes is also considerably longer than that of membranes that do not include IL, at least 292 days in the best case. The sensing membrane without luminophore and only containing the pH indicator is proposed for the color-based measurement of CO₂ using a digital camera for possible use in food-packaging technology. Graphical abstract ᅟ.

A sensitive A3B porphyrin nanomaterial for CO2 detection

The present report deals with the tailoring, preparation and characterization of novel nanomaterials sensitive to CO2 for use in detection of this gas during space habitation missions. A new nanostructured material based on mixed substituted asymmetrical A3B porphyrin: 5-(4-pyridyl)-10,15,20-tris(3,4-dimethoxyphenyl)-porphyrin (PyTDMeOPP) was synthesized and characterized by 1H-NMR, FT-IR, UV-vis, fluorescence, MS, HPLC and AFM. Introducing one pyridyl substituent in the 5-meso-position of porphyrin macrocycle confers some degree of hydrophilicity, which may cause self-assembly properties and a better response to increased acidity. The influence of pH and nature of the solvent upon H and J aggregates of the porphyrin are discussed. Porphyrin aggregation at the air-THF interface gave a triangular type morphology, randomly distributed but uniformly oriented. When deposition was made by multiple drop-casting operations, a network of triangles of uniform size was created and a porous structure was obtained, being reorganized finally in rings. When the deposition was made from CHCl3, ring structures ranging in internal diameter from 300 nm to 1 µm, but with the same width of the corona circular of approx. 200 nm were obtained. This porphyrin-based material, capable of generating ring aggregates in both THF and CHCl3, has been proven to be sensitive to CO2 detection. The dependence between the intensity of porphyrin UV-vis absorption and the concentration of CO2 has a good correlation of 98.4%.

Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer

The development of a new methodology for visualizing and detecting gases is imperative for various applications. Here, we report a novel strategy in which gas molecules are detected by signals from a reporter guest that can read out a host structural transformation. A composite between a flexible porous coordination polymer and fluorescent reporter distyrylbenzene (DSB) selectively adsorbed CO₂ over other atmospheric gases. This adsorption induced a host transformation, which was accompanied by conformational variations of the included DSB. This read-out process resulted in a critical change in DSB fluorescence at a specific threshold pressure. The composite shows different fluorescence responses to CO₂ and acetylene, compounds that have similar physicochemical properties. Our system showed, for the first time, that fluorescent molecules can detect gases without any chemical interaction or energy transfer. The host-guest coupled transformations play a pivotal role in converting the gas adsorption events into detectable output signals.