Barium alginate caged Fe3O4@C18 magnetic nanoparticles for the pre-concentration of polycyclic aromatic hydrocarbons and phthalate esters from environmental water samples

Polysaccharide nanocomposites in wastewater treatment: A review

In modern times, wastewater treatment is vital due to increased water contamination arising from pollutants such as nutrients, pathogens, heavy metals, and pharmaceutical residues. Polysaccharides (PSAs) are natural, renewable, and non-toxic biopolymers used in wastewater treatment in the field of gas separation, liquid filtration, adsorption processes, pervaporation, and proton exchange membranes. Since addition of nanoparticles to PSAs improves their sustainability and strength, nanocomposite PSAs has gained significant attention for wastewater treatment in the past decade. This review presents a comprehensive analysis of PSA-based nanocomposites used for efficient wastewater treatment, focusing on adsorption, photocatalysis, and membrane-based methods. It also discusses potential future applications, challenges, and opportunities in adsorption, filtration, and photocatalysis. Recently, PSAs have shown promise as adsorbents in biological-based systems, effectively removing heavy metals that could hinder microbial activity. Cellulose-mediated adsorbents have successfully removed various pollutants from wastewater, including heavy metals, dyes, oil, organic solvents, pesticides, and pharmaceutical residues. Thus, PSA nanocomposites would support biological processes in wastewater treatment plants. A major concern is the discharge of antibiotic wastes from pharmaceutical industries, posing significant environmental and health risks. PSA-mediated bio-adsorbents, like clay polymeric nanocomposite hydrogel beads, efficiently remove antibiotics from wastewater, ensuring water quality and ecosystem balance. The successful use of PSA-mediated bio-adsorbents in wastewater treatment depends on ongoing research to optimize their application and evaluate their potential environmental impacts. Implementing these eco-friendly adsorbents on a large scale holds great promise in significantly reducing water pollution, safeguarding ecosystems, and protecting human health.

Unpacking Phthalates from Obscurity in the Environment

Phthalates (PAEs) are a group of synthetic esters of phthalic acid compounds mostly used as plasticizers in plastic materials but are widely applied in most industries and products. As plasticizers in plastic materials, they are not chemically bound to the polymeric matrix and easily leach out. Logically, PAEs should be prevalent in the environment, but their prevalence, transport, fate, and effects have been largely unknown until recently. This has been attributed, inter alia, to a lack of standardized analytical procedures for identifying them in complex matrices. Nevertheless, current advancements in analytical techniques facilitate the understanding of PAEs in the environment. It is now known that they can potentially impact ecological and human health adversely, leading to their categorization as endocrine-disrupting chemicals, carcinogenic, and liver- and kidney-failure-causing agents, which has landed them among contaminants of emerging concern (CECs). Thus, this review article reports and discusses the developments and advancements in PAEs' standard analytical methods, facilitating their emergence from obscurity. It further explores the opportunities, challenges, and limits of their advancements.

Construction of novel magnetic nanoparticles for enrichment of benzo(α)pyrene from edible oils followed by HPLC determination

A novel method for benzo(α)pyrene (Bαp) enrichment from an oil matrix was developed by using magnetic nanoparticles (Fe₃O₄@dopamine/graphene oxide, Fe₃O₄@DA/GO) as extraction absorbents, and the chemical properties of the synthesized nanoparticles were characterized. Various parameters were investigated to optimize the extraction of Bαp from oils. Under optimal conditions (pH, 4; extraction time, 0.5 min; elution solvent, 1 mL; absorbent weight, 20 mg; elution time, 0.5 min), these nanoparticles showed excellent abilities to enrich Bαp from the saponified oil solution and were easily separated by a magnet. High-performance liquid chromatography plus fluorescence detection (HPLC-FLD) was then applied to determine the Bαp content with excellent linearity (R² = 0.999). The detection limit was 0.13 µg/kg, while the limit of quantification was 0.42 µg/kg. The spiked recoveries of Bαp in oils ranged from 73.5% to 121%. Compared with previous reports, the proposed method displayed many advantages, including a high efficiency of oil matrix removal, short extraction time, and convenient extraction procedure.

Magnetic Adsorbents for Wastewater Treatment: Advancements in Their Synthesis Methods

The remediation of water streams, polluted by various substances, is important for realizing a sustainable future. Magnetic adsorbents are promising materials for wastewater treatment. Although numerous techniques have been developed for the preparation of magnetic adsorbents, with effective adsorption performance, reviews that focus on the synthesis methods of magnetic adsorbents for wastewater treatment and their material structures have not been reported. In this review, advancements in the synthesis methods of magnetic adsorbents for the removal of substances from water streams has been comprehensively summarized and discussed. Generally, the synthesis methods are categorized into five groups, as follows: direct use of magnetic particles as adsorbents, attachment of pre-prepared adsorbents and pre-prepared magnetic particles, synthesis of magnetic particles on pre-prepared adsorbents, synthesis of adsorbents on preprepared magnetic particles, and co-synthesis of adsorbents and magnetic particles. The main improvements in the advanced methods involved making the conventional synthesis a less energy intensive, more efficient, and simpler process, while maintaining or increasing the adsorption performance. The key challenges, such as the enhancement of the adsorption performance of materials and the design of sophisticated material structures, are discussed as well.

Determination of Phthalate Esters in Cosmetics and Baby Care Products by a Biosorbent Based on Lawsone Capped Chitosan and Followed by Liquid Chromatography

This research presents a green synthetic pathway for the preparation of a new biosorbent and eco-friendly extraction process of three phthalate esters: dimethyl phthalate, di-butyl phthalate and benzyl butyl phthalate, from cosmetics and baby care products. Dispersive solid-phase extraction was used based on a new core-shell biomass/sorbent; chitosan-loaded lawsone. The proposed method provides fortunate trapping of phthalate esters in a one-step extraction. Under the optimized extraction conditions, the current work was presented low detection limits (0.03-0.15 ng. g-1), limits of quantification (0.1-0.5 ng·g-1) and reasonable linearity (0.1-10 000 ng. g-1). The applicability of the method was estimated by recovery experiments at different spiking levels (n = 5) for phthalate esters in the real samples.

Advances in water treatment technologies for removal of polycyclic aromatic hydrocarbons: Existing concepts, emerging trends, and future prospects

In the last two decades, environmental experts have focused on the development of several biological, chemical, physical, and thermal methods/technologies for remediation of PAH-polluted water. Some of the findings have been applied to field-scale treatment, while others have remained as prototypes and semi-pilot studies. Existing treatment options include extraction, chemical oxidation, bioremediation, photocatalytic degradation, and adsorption (employing adsorbents such as biomass derivatives, geosorbents, zeolites, mesoporous silica, polymers, nanocomposites, and graphene-based materials). Electrokinetic remediation, advanced phytoremediation, green nanoremediation, enhanced remediation using biocatalysts, and integrated approaches are still at the developmental stage and hold great potential. Water is an essential component of the ecosystem and highly susceptible to PAH contamination due to crude oil exploration and spillage, and improper municipal and industrial waste management, yet comprehensive reviews on PAH remediation are only available for contaminated soils, despite the several treatment methods developed for the remediation of PAH-polluted water. This review seeks to provide a comprehensive overview of existing and emerging methods/technologies, in order to bridge information gaps toward ensuring a green and sustainable remedial approach for PAH-contaminated aqueous systems. PRACTITIONER POINTS: Comprehensive review of existing and emerging technologies for remediation of PAH-polluted water. Factors influencing efficiency of various methods, challenges and merits were discussed. Green nano-adsorbents, nano-oxidants and bio/phytoremediation are desirous for ecofriendly and economical PAH remediation. Adoption of an integrated approach for the efficient and sustainable remediation of PAH-contaminated water is recommended.

Synthesis of a magnetic sorbent and its application in extraction of different pesticides from water, fruit, and vegetable samples prior to their determination by gas chromatography-tandem mass spectrometry

In this investigation, an efficient sorbent based on Fe₃O₄@polyphenols magnetic nanoparticles has been prepared using the extract of Mentha piperita leaves for the first time. The main purposes of this study were synthesis of economically affordable and environmentally friendly sorbent using the extract of Mentha piperita leaves and evaluating its application as a sorbent in magnetic solid phase extraction. The functional groups, magnetic property, size, and shape of the synthesized sorbent were characterized. The sorbent was utilized for the extraction and preconcentration of various pesticides (chlorpyrifos, fenazaquin, penconazole, diniconazole, oxadiazon, haloxyfop-methyl, hexaconazole, clodinafop-propargyl, tebuconazole, and fenoxaprop-p-ethyl) from vegetable, fruit, and water samples. After magnetic solid phase extraction, a dispersive liquid-liquid microextraction method was done to achieve low detection limits. The enriched pesticides were monitored by gas chromatography-tandem mass spectrometry. The synthesized sorbent was characterized by Fourier transform infrared, scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction, and vibrating sample magnetometer techniques, which confirmed the successful synthesis of the magnetic nanoparticles. The effective parameters such as the sorbent weight, ionic strength, pH, vortex time, and kind and volume of elution and extraction solvents were studied. Under optimum extraction conditions, the method showed broad linear ranges (0.05-1000 µg L^-1) with low limits of detection (0.27-4.13 ng L^-1) and quantification (0.91-13.8 ng L^-1). Extraction recoveries and enrichment factors were in the ranges of 54-89 % and 491-811, respectively.

A novel magnetic solid-phase extraction method for detection of 14 heterocyclic aromatic amines by UPLC-MS/MS in meat products

The current study developed a cheap and effective method for the simultaneous extraction of 14 heterocyclic aromatic amines (HAAs) in food matrix. Core-shell Fe₃O₄@PDA nanoparticles were constructed and acted as the magnetic solid-phase extraction adsorbent to separate and purify HAAs from meat products for the first time. Then, UPLC-MS/MS technique was employed to identify and quantify the HAAs easily. Fe₃O₄@PDA nanoparticles were synthesized and characterized successfully. Totally 14 HAAs were completely separated in 19.99 min with good regression coefficients. LODs and LOQs were in the range of 0.013-0.247 ng/g and 0.056-0.803 ng/g, respectively. The intra-day precisions and inter-day precisions were below 9%. Except for IQ[4,5-b], Phe-p-1, PhIP, other 11 types of HAAs (DMIP, 1,5,6-TMIP, IQ, IQx, MeIQ, MeIQx, 7,8-DiMeIQx, AαC, MeAαC, Harman, Norharman) could acquire relatively high recoveries (71.06%-108.49%). The proposed method was successfully devoted to the evaluation of HAAs levels in 8 commercial meat products to verify the adaptability.

Magnetic Cu: CuO-GO nanocomposite for efficient dispersive micro-solid phase extraction of polycyclic aromatic hydrocarbons from vegetable, fruit, and environmental water samples by liquid chromatographic determination

In this research, we presented a magnetic dispersive micro-solid phase extraction (MD-μ-SPE) method coupled with high performance liquid chromatography (HPLC) based on the use of magnetic Cu: CuO-Graphene Oxide (GO) nanocomposite (Fe₃O₄/Cu: CuO/GO-NC) for the separation and preconcentration of polycyclic aromatic hydrocarbons (PAHs), i.e. naphthalene (Nap), phenanthrene (Phe), anthracene (Ant), and pyrene (Pyr), in vegetable (onion, tomato, carrot, herb, watermelon, lettuce, eggplant, and chili pepper), fruit (apple, watermelon, and grape), wastewater, and water samples. The MD-μ-SPE of PAHs in matrix samples was carried out, and the impacts of pH, ionic strength, extraction time, temperature, eluent volume, and sorbent mass on the recovery of PAHs were investigated by using Placket-Burman design (PBD). In addition, by using the central composite design (CCD), the best combination of each important variable was measured. Sorbent mass of 14 mg, eluent volume of 200 μL, and 12 min extraction time at the central level of other factors were optimal conditions of pretreatment for the highest extraction recovery (ER%) of trace PAHs. Under the optimal conditions, the method proposed herein provided high enrichment factors ranged from 116.51 to 133.05, good linearity in the range of 10-3800 ng mL^-1 for Pyr, 3.0-3500 ng mL^-1 for Phe, 5.0-3200 ng mL^-1 for Nap, and 5.0-3000 ng mL^-1 for Ant with coefficient of determination (R²) values between 0.9889 and 0.9963, low limits of detection (LOD) and quantification (LOQ) in the range of 0.015-0.061 and 0.485-2.034 ng mL^-1, respectively, and also satisfactory spiked recoveries (between 95.1% and 106.8%) with the relative standard deviations (RSDs) values in the range of 1.73%-5.62%. The Fe₃O₄/Cu: CuO/GO-NC-based MD-μ-SPE followed by HPLC-UV corroborated promising results for the convenient and effective determination of PAHs in the samples of vegetables, fruits, and environmental water. The results of this study revealed that our developed method is easy, feasible, precise, highly effective, and convenient to operate for the trace analysis of PAHs in different real samples. The extraction recovery was about 90% of the initial recovery after the sorbent usage for three times; therefore, the Fe₃O₄/Cu: CuO/GO-NC can readily be regenerated.

Toxicity of superparamagnetic iron oxide nanoparticles to the microalga Chlamydomonas reinhardtii

Superparamagnetic iron oxide nanoparticles (SPION) have been widely studied for different biomedical and environmental applications. In this study we evaluated the toxicity and potential alterations of relevant physiological parameters caused to the microalga Chlamydomonas reinhardtii (C. reinhardtii) upon exposure to SPION. The results showed dose-dependent toxicity. A mechanistic study combining flow cytometry and physiological endpoints showed a toxic response consisting of a decrease in metabolic activity, increased oxidative stress and alterations in the mitochondrial membrane potential. Additionally, and due to the light absorption of SPION suspensions, we observed a significant shading effect, causing a marked decrease in photosynthetic activity. In this work, we demonstrated for the first time, the internalization of SPION by endocytosis in C. reinhardtii. These results demonstrated that SPION pose a potential risk for the environment if not managed properly.

Coated direct inlet probe coupled with atmospheric-pressure chemical ionization and high-resolution mass spectrometry for fast quantitation of target analytes

The coated direct inlet probe (CDIP) is a new laboratory-made low-cost technology developed from a direct inlet probe (DIP), which has the advantage of quick enrichment/cleanup of an analyte from liquid samples. A capillary probe is coated with hydroxy-terminated polydimethylsiloxane (OH-PDMS), divinylbenzene (DVB), and β-cyclodextrin (β-CD) by a sol-gel method. This probe can be directly coupled with a commercialized atmospheric-pressure chemical ionization (APCI) ion source and high-resolution mass spectrometry, which are widely applicable, reliable, and durable. The ability to perform quantitative analyses with the use of a stable-isotope-labeled internal standard (SIL-IS) was tested by using different concentrations of acenaphthylene (ACY), acenaphthene (ACP), fluorene (FLR), fluoranthene (FLT), phenanthrene (PHE), and benzo[a]pyrene (B[a]P). Calibration curves with a coefficient of determination of R² ≥ 0.9982 for different polycyclic aromatic hydrocarbons (PAHs) were obtained. A limit of detection (LOD) of 0.008-0.04 ng mL^-1 for PAHs was determined. The entire workflow is solvent-free and can be completed in less than 5 min, which demonstrates the advantages of this technique for quantitative analysis.

Organic Analysis of Environmental Samples Using Liquid Chromatography with Diode Array and Fluorescence Detectors: An Overview

This overview is focused to provide an useful guide of the families of organic pollutants that can be determined by liquid chromatography operating in reverse phase and ultraviolet/fluorescence detection. Eight families have been classified as the main groups to be considered: carbonyls, carboxyls, aromatics, phenols, phthalates, isocyanates, pesticides and emerging. The references have been selected based on analytical methods used in the environmental field, including both the well-established procedures and those more recently developed.

Method development for determination of migrated phthalate acid esters from polyethylene terephthalate (PET) packaging into traditional Iranian drinking beverage (Doogh) samples: a novel approach of MSPE-GC/MS technique

In the current study, a novel magnetic solid phase extraction (MSPE) technique combined with a gas chromatography/mass spectroscopy (GC/MS) was developed to determine the phthalate ester content of bottled Doogh samples. Doogh is a yogurt-based drinking beverage, which is frequently consumed in Middle East and Balkans. It is produced by stirring yogurt in Chern separation machine and consists of substances such as water, yogurt, and salt in addition to aqueous extracts of native herbs. The magnetic multi-walled carbon nanotubes (MWCNT-Fe₃O₄) were used as adsorbents of phthalate acid esters (PAEs) due to a superior adsorption capability of hydrophobic compounds. In this context, the quantity of the extractable migrated phthalate esters (dibutyl phthalate (DBP), dimethyl phthalate (DMP), butyl benzyl phthalate (BBP), diethyl phthalate (DEP), di-N-octyl phthalate (DNOP), and bis (2-ethylhexyl) phthalate (DEHP)) from polyethylene terephthalate (PET) bottles into Doogh samples was measured. The correlation between the concentration of migrated PAEs and some factors such as the type of Doogh (gaseous and without gas), difference in brand (five brands), volume (1500 and 300 mL), and the storage time also was investigated. The migration level into Doogh samples was increased by incorporating of gas as well as increasing the volume of PET bottles. Also, with elaborating of storage time, the migration of some phthalates such as DEHP (the mean from 2419.85 ng L^-1 in the first week to 2716.15 ng L^-1 in the second month), DEP, and total phthalate was increased. However, no significant difference in concentrations of migrated phthalate esters among different examined brands was noted. Finally, the concentration of migrated PAEs from bottle into all the examined Doogh samples was below the defined standards by EPA; 6 μg/L for DEHP in drinking water. Graphical abstract ᅟ.

Magnetic solid phase extraction using Fe3O4@SiO2@C8 nanoparticles performed in a narrow-bore tube followed by dispersive liquid–liquid microextraction for extraction and preconcentration of nine pesticides

In the present work, a new magnetic solid phase extraction method performed in a narrow-bore tube using synthesized Fe₃O₄@SiO₂@C₈ magnetic nanoparticles has been developed.

Magnetic solid-phase extraction using a mixture of two types of nanoparticles followed by gas chromatography-mass spectrometry for the determination of six phthalic acid esters in various water samples

A mixture of Fe₃O₄@MIL-100 and Fe₃O₄@SiO₂@polythiophene nanoparticles exhibit high extraction efficiency for PAEs in water.

Magnetic graphene solid-phase extraction in the determination of polycyclic aromatic hydrocarbons in water

Magnetic graphene nanocomposite was fabricated and applied to the extraction of PAHs in water, followed by GC-MS. The method showed a good linearity. The limits of detection (S/N = 3) were in a range between 0.02–14.3 ng L⁻¹.

Polythiophene-Chitosan Magnetic Nanocomposite as a Highly Efficient Medium for Isolation of Fluoxetine from Aqueous and Biological Samples

Polythiophene/chitosan magnetic nanocomposite as an adsorbent of magnetic solid phase extraction was proposed for the isolation of fluoxetine in aqueous and biological samples prior to fluorescence detection at 246 nm. The synthesized nanoparticles, chitosan and polythiophene magnetic nanocomposite, were characterized by scanning electron microscopy, FT-IR, TGA, and EDAX. The separation of the target analyte from the aqueous solution containing the fluoxetine and polythiophene/chitosan magnetic nanocomposite was simply achieved by applying external magnetic field. The main factors affecting the extraction efficiency including desorption conditions, extraction time, ionic strength, and sample solution pH were optimized. The optimum extraction conditions were obtained as 10 min for extraction time, 25 mg for sorbent amount, 50 mL for initial sample volume, methanol as desorption solvent, 1.5 mL for desorption solvent volume, 3 min for desorption time, and being without salt addition. Under the optimum conditions, good linearity was obtained within the range of 15-1000 μg L(-1) for fluoxetine, with correlation coefficients 0.9994. Furthermore, the method was successfully applied to the determination of fluoxetine in urine and human blood plasma samples. Compared with other methods, the current method is characterized with highly easy, fast separation and low detection limits.

Application of a Zn(ii) based metal–organic framework as an efficient solid-phase extraction sorbent for preconcentration of plasticizer compounds

A solid-phase extraction (SPE) sorbent, a Zn(ii) based metal–organic framework, was prepared via a simple, solventless, green and a low-cost mechanosynthesis process.

Magnetic solid-phase extraction based on modified ferum oxides for enrichment, preconcentration, and isolation of pesticides and selected pollutants

Recently, a simple, rapid, high-efficiency, selective, and sensitive method for isolation, preconcentration, and enrichment of analytes has been developed. This new method of sample handling is based on ferum oxides as magnetic nanoparticles (MNPs) and has been used for magnetic solid-phase extraction (MSPE) of various analytes from various matrices. This review focuses on the applications of modified ferum oxides, especially modified Fe3O4 MNPs, as MSPE adsorbent for pesticide isolation from various matrices. Further perspectives on MSPE based on modified Fe3O4 for inorganic metal ions, organic compounds, and biological species from water samples are also presented. Ferum(III) oxide MNPs (Fe2O3) are also highlighted.

Confocal Raman Microscopy for pH-Gradient Preconcentration and Quantitative Analyte Detection in Optically Trapped Phospholipid Vesicles

The ability of a vesicle membrane to preserve a pH gradient, while allowing for diffusion of neutral molecules across the phospholipid bilayer, can provide the isolation and preconcentration of ionizable compounds within the vesicle interior. In this work, confocal Raman microscopy is used to observe (in situ) the pH-gradient preconcentration of compounds into individual optically trapped vesicles that provide sub-femtoliter collectors for small-volume samples. The concentration of analyte accumulated in the vesicle interior is determined relative to a perchlorate-ion internal standard, preloaded into the vesicle along with a high-concentration buffer. As a guide to the experiments, a model for the transfer of analyte into the vesicle based on acid-base equilibria is developed to predict the concentration enrichment as a function of source-phase pH and analyte concentration. To test the concept, the accumulation of benzyldimethylamine (BDMA) was measured within individual 1 μm phospholipid vesicles having a stable initial pH that is 7 units lower than the source phase. For low analyte concentrations in the source phase (100 nM), a concentration enrichment into the vesicle interior of (5.2 ± 0.4) × 10(5) was observed, in agreement with the model predictions. Detection of BDMA from a 25 nM source-phase sample was demonstrated, a noteworthy result for an unenhanced Raman scattering measurement. The developed model accurately predicts the falloff of enrichment (and measurement sensitivity) at higher analyte concentrations, where the transfer of greater amounts of BDMA into the vesicle titrates the internal buffer and decreases the pH gradient. The predictable calibration response over 4 orders of magnitude in source-phase concentration makes it suitable for quantitative analysis of ionizable compounds from small-volume samples. The kinetics of analyte accumulation are relatively fast (∼15 min) and are consistent with the rate of transfer of a polar aromatic molecule across a gel-phase phospholipid membrane.

Preparation of naphthyl functionalized magnetic nanoparticles for extraction of polycyclic aromatic hydrocarbons from river waters

Naphthyl functionalized magnetic nanoparticles (Fe₃O₄@SiO₂@Nap) was prepared and successfully applied for the magnetic solid-phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs) from river water samples.