A sensitive amperometric sensor for hydrazine and hydrogen peroxide based on palladium nanoparticles/onion-like mesoporous carbon vesicle

A Synergistic Effect of Phthalimide-Substituted Sulfanyl Porphyrazines and Carbon Nanotubes to Improve the Electrocatalytic Detection of Hydrogen Peroxide

A sulfanyl porphyrazine derivative with peripheral phthalimide moieties was metallated with cobalt(II) and iron(II) metal ions. The purity of the macrocycles was confirmed by HPLC, and subsequently, compounds were characterized using various analytical methods (ES-TOF, MALDI-TOF, UV–VIS, and NMR spectroscopy). To obtain hybrid electroactive electrode materials, novel porphyrazines were combined with multiwalled carbon nanotubes. The electrocatalytic effect derived from cobalt(II) and iron(II) cations was evaluated. As a result, a significant decrease in the overpotential was observed compared with that obtained with bare glassy carbon (GC) or glassy carbon electrode/carbon nanotubes (GC/MWCNTs), which allowed for sensitive determination of hydrogen peroxide in neutral conditions (pH 7.4). The prepared sensor enables a linear response to H₂O₂ concentrations of 1–90 µM. A low detection limit of 0.18 μM and a high sensitivity of 640 μA mM⁻¹ cm⁻² were obtained. These results indicate that the obtained sensors could potentially be applied in biomedical and environmental fields.

EDTA derived graphene supported porous cobalt hexacyanoferrate nanospheres as a highly electroactive nanocomposite for hydrogen peroxide sensing

Developed a highly electroactive graphene and porous cobalt hexacyanoferrate nanosphere (Gr/P-CoHCF-NSPs) composite for H2O2 sensing by using EDTA chelation strategy.

Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications

Recent advances in nanomaterial design and synthesis has resulted in robust sensing systems that display superior analytical performance. The use of nanomaterials within sensors has accelerated new routes and opportunities for the detection of analytes or target molecules. Among others, carbon-based sensors have reported biocompatibility, better sensitivity, better selectivity and lower limits of detection to reveal a wide range of organic and inorganic molecules. Carbon nanomaterials are among the most extensively studied materials because of their unique properties spanning from the high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency fostering their use in sensing applications. In this paper, a comprehensive review has been made to cover recent developments in the field of carbon-based nanomaterials for sensing applications. The review describes nanomaterials like fullerenes, carbon onions, carbon quantum dots, nanodiamonds, carbon nanotubes, and graphene. Synthesis of these nanostructures has been discussed along with their functionalization methods. The recent application of all these nanomaterials in sensing applications has been highlighted for the principal applicative field and the future prospects and possibilities have been outlined.

Hydrazine exposure: A near-infrared ICT-based fluorescent probe and its application in bioimaging and sewage analysis

Hydrazine (N₂H₄) is an environment pollutant with high acute toxicity and potential carcinogenicity, and detection of N₂H₄ has attracted increasing attention. In the present study, a low toxicity near-infrared fluorescent probe (DCDB) based on the intramolecular charge transfer (ICT) principle was developed. The probe DCDB exhibits excellent selectivity and high sensitivity (LOD = 1.27 ppb) for N₂H₄, fast reaction rate (5 min), extremely large Stokes shift (160 nm). The color transformation of the DCDB-N₂H₄ system from purple to pink can be observed with the naked eye. The success of N₂H₄ test strips to detect trace N₂H₄ in actual sewage strongly illustrates the practical application potential of DCDB. Importantly, DCDB can be utilized to monitor the distribution of exogenous N₂H₄ in vivo and in vitro.

Three-dimensional porous self-assembled chestnut-like nickel-cobalt oxide structure as an electrochemical sensor for sensitive detection of hydrazine in water samples

Three-dimensional NiCo₂O₄ is a kind of superior sensing material owing to its high electron transfer capability, large available surface area and numbers of active sites. In this work, NiCo₂O₄ of the three-dimensional chestnut-like structure were easily achieved through a one step hydrothermal process. Afterwards, the morphology and structure were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). Based on the three-dimensional porous chestnut-like NiCo₂O₄, an electrochemical sensor for hydrazine (N₂H₄) detection is fabricated. This electrochemical platform can realize good selectivity, excellent stability, high sensitivity (∼2154.4 μA mM^-1 cm^-2), and low detection limit (0.3 μM), as well as a wide linear range from 1 μM to 1096 μM. The synergistic effect of nickel-cobalt in such mixed transition metal oxides which Co in Co₃O₄ is partially replaced by Ni are beneficial for enhancing sensing properties. This study proves that three-dimensional porous chestnut-like NiCo₂O₄ is electrochemically active for catalytic performance which is particular and promising material for good application in the practical detection of N₂H₄.

A highly selective long-wavelength fluorescent probe for hydrazine and its application in living cell imaging

A highly selective long-wavelength turn-on fluorescent probe has been developed for the detection of N₂H₄. The probe was prepared by conjugation the tricyanofuran-based D-π-A system with a recognizing moiety of acetyl group. In the presence of N₂H₄, the probe can be effectively hydrazinolysized and produce a turn-on fluorescent emission at 610nm as well as a large red-shift in the absorption spectrum corresponding to a color change from yellow to blue. The sensing mechanism was confirmed by HPLC, MS, UV-vis, emission spectroscopic and theoretical calculation studies. The probe displayed high selectivity and sensitivity for N₂H₄ with a LOD (limit of detection) of 0.16μM. Moreover, the probe was successfully utilized for the detection of hydrazine in living cells.

Recent Trends on Electrochemical Sensors Based on Ordered Mesoporous Carbon

The past decade has seen an increasing number of extensive studies devoted to the exploitation of ordered mesoporous carbon (OMC) materials in electrochemistry, notably in the fields of energy and sensing. The present review summarizes the recent achievements made in field of electroanalysis using electrodes modified with such nanomaterials. On the basis of comprehensive tables, the interest in OMC for designing electrochemical sensors is illustrated through the various applications developed to date. They include voltammetric detection after preconcentration, electrocatalysis (intrinsically due to OMC or based on suitable catalysts deposited onto OMC), electrochemical biosensors, as well as electrochemiluminescence and potentiometric sensors.

Shape-selective synthesis of NiO nanostructures for hydrazine oxidation as a nonenzymatic amperometric sensor

In this work, we demonstrate the shape-dependent electrocatalytic activity of NiO NPs towards hydrazine oxidation.

Pd nanoparticle-modified electrodes for nonenzymatic hydrogen peroxide detection

A hydrogen peroxide (H2O2) sensor based on Pd nanoparticles (NPs) and glassy carbon electrodes (GCEs) is fabricated. Pd NPs are deposited on GCEs by using a gas phase cluster beam deposition technique. The NP-deposited electrodes show enhanced electrocatalytic activity in reduction of H2O2. The electrode with an optimized NP coverage of 85 % has a high selective and stable nonenzymatic sensing ability of H2O2 with a low detection limit (3.4 × 10(-7) M), high sensitivity (50.9 μA mM(-1)), and a wide linear range (from 1.0 × 10(-6) to 6.0 × 10(-3) M). The reduction peak potential of the electrode is close to -0.12 V, which enables high selective amperometric detection of H2O2 at a low applied potential.

A Simple Green Synthesis of Palladium Nanoparticles with Sargassum Alga and Their Electrocatalytic Activities Towards Hydrogen Peroxide

This study presents the synthesis of palladium nanoparticles (PdNPs) using the extract derived from the marine alga, Sargassum bovinum, collected from Persian Gulf area. Water-soluble compounds that exist in the marine alga extract were the main cause of the reduction of palladium ions to Pd nanoparticles. The basic properties of PdNPs produced in this method were confirmed by UV-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray (EDX) analysis, and Fourier transform infrared spectroscopy (FTIR). TEM confirmed the monodispersed and octahedral shape of PdNPs within the size ranges from 5 to 10 nm. Catalytic performance of the biosynthetic PdNPs was investigated by electrochemical reduction of hydrogen peroxide (H2O2). PdNP-modified carbon ionic liquid electrode (PdNPs/CILE) was developed as a nonenzymatic sensor for the determination of hydrogen peroxide. Amperometric measurements showed that PdNPs/CILE is a reliable sensor for the detection of hydrogen peroxide in the range of 5.0 μM-15.0 mM with a sensitivity of 284.35 mAmM(-1) cm(-2) and a detection limit of 1.0 μM. Moreover, PdNPs/CILE exhibits a wide linear range, high sensitivity and selectivity, and excellent stability for the detection of H2O2 in aqueous solutions.

Ultrafine Pd nanoparticles encapsulated in microporous Co3O4 hollow nanospheres for in situ molecular detection of living cells

Recent progress in the in situ molecular detection of living cells has attracted tremendous research interests due to its great significance in biochemical, physiological, and pathological investigation. Especially for the electrochemical detection of hydrogen peroxide (H2O2) released by living cells, the highly efficient and cost-effective electrocatalysts are highly desirable. In this work, we develop a novel type of microporous Co3O4 hollow nanospheres containing encapsulated Pd nanoparticles (Pd@Co3O4). Owing to the synergy effect between the permeable microporous Co3O4 shell and the ultrafine Pd nanoparticles that encapsulated in it, the resultant Pd@Co3O4 based electrode exhibits excellent electrochemical sensor performance toward H2O2, even when the content of Pd in Pd@Co3O4 hollow nanospheres is as low as 1.14 wt %, which enable it be used for real-time tracking of the secretion of H2O2 in different types of living human cells.

Large mesoporous carbons decorated with silver and gold nanoparticles by a self-assembly method: enhanced electrocatalytic activity for H2O2 electroreduction and sodium nitrite electrooxidation

The silver, gold nanoparticles were grown onto poly (diallyldimethyl ammoniumchloride, PDDA)-functionalized large mesoporous carbon (LMC) by simple self-assembly method. AuNPs or AgNPs/PDDA–LMC show superior electrocatalytic activity.