Hyphenated analytical techniques for multidimensional characterisation of submicron particles: A review

Electrical asymmetrical flow field-flow fractionation: Fundamentals, evolution, applications, and prospects

Among the plethora of techniques that conforms the Field-Flow Fractionation (FFF) family, electrical field-flow fractionation (ElFFF) was designed to separate different analytes based on their size and electrophoretic mobility (µ). However, major technical and operational issues made this technique to fall into oblivion. Many of those drawbacks can be circumvented if another field is employed as the main driving force for the elution in the same channel, such as the most successful and useful FFF-related technique, asymmetrical flow field-flow fractionation (AF4). The combination results in a new member of the FFF family termed as electrical asymmetrical flow field-flow fractionation (EAF4). This technique was conceptualized in 2015, and has gained attention, especially in the study of biomolecules, nanomaterials, their interactions and transformations, due to its ability to determine size-resolved electrophoretic mobility of this kind of analytes, which is not directly accessible by batch techniques based on e.g., electrophoretic light scattering. This review gives an overview of this novel analytical technique, including a summary of the theoretical elements behind this approach, followed by a discussion of the possibility to provide multiple information through its coupling with a variety of detectors. Also, the applications of EAF4 to analytes from the nano to the micro scale in diverse matrices are presented. Finally, the challenges that EAF4 faces today and trends for the near future are addressed.

Novel zone elution mode in coiled tube field-flow fractionation for online separation and characterization of environmental submicron particles

Coiled tube field-flow fractionation (CTFFF) is currently applied to environmental and material studies. In the present work, a novel zone elution mode in CTFFF has been proposed and developed. Zone elution mode is based on the separation of particles by stepwise decreasing the flow rate of the carrier fluid and their subsequent elution at a constant flow rate. The fractionation parameters were optimized using a mixture of standard silica submicron particles (150, 390, and 900 nm). Taking samples of volcanic ash as examples, it has been demonstrated that zone elution mode can be successfully used for the fractionation of environmental nano- and submicron particles. For the first time, CTFFF was coupled online with a dynamic light scattering detector for the size characterization of eluted particles. Zone elution in CTFFF can serve for the further development of hyphenated techniques enabling efficient fractionation and size/elemental characterization of environmental particles in nano- and submicrometric size ranges.

Current approaches, and challenges on identification, remediation and potential risks of emerging plastic contaminants: A review

Plastics are widely employed in modern civilization because of their durability, mold ability, and light weight. In the recent decade, micro/nanoplastics research has steadily increased, highlighting its relevance. However, contaminating micro/nanoplastics in marine environments, terrestrial ecosystems, and biological organisms is considered a severe threat to the environmental system. Geographical distribution, migration patterns, etymologies of formation, and ecological ramifications of absorption are just a few topics covered in the scientific literature on environmental issues. Degradable solutions from material science and chemistry are needed to address the micro/nanoplastics problem, primarily to reduce the production of these pollutants and their potential effects. Removing micro/nanoplastics from their discharge points has been a central and effective way to mitigate the adverse pollution effects. In this review, we begin by discussing the hazardous effect on living beings and the identification-characterization of micro/nanoplastics. Then, we provide a summary of the existing degradation strategies, which include bio-degradation and advanced oxidation processes (AOPs), and a detailed discussion of their degradation mechanisms is also represented. Finally, a persuasive summary of the evaluated work and projections for the future of this topic is provided.

A two-dimensional nanoparticle characterization method combining differential mobility analyzer and single-particle inductively coupled plasma-mass spectrometry with an atomizer-enabled sample introduction (ATM-DMA-spICP-MS): Toward the analysis of heteroaggregated nanoparticles in wastewater

Characterizing engineered nanoparticles (ENPs) in complex environmental matrices remains a challenging task. This work presents a two-dimensional size analysis method by combining differential mobility analyzer (DMA) and single-particle inductively coupled plasma-mass spectrometry (spICP-MS) with a new atomizer (ATM)-enabled sample introduction that is relatively easy to operate. The tailing of electrical mobility size distributions was solved by heating the aerosol flow, where water-shelled gold nanoparticles (AuNPs) were dehydrated, effectively eliminating the tailing. The improved method has a good sizing performance and can resolve the size fractions of mixed 30 nm and 50 nm AuNPs. It can reliably analyze 7.8 × 10⁵ to 1.9 × 10⁷ # of 50 nm AuNPs (or 4.1 × 10⁵ to 10⁷ # NPs/mL, equivalent to 0.6 to 14.3 μg Au/L) with a linear response and a limit of detection of 7.8 × 10⁵ # AuNPs (equivalent to 4.1 × 10⁵ # AuNPs/mL) that is relevant to NP concentrations in surface water and wastewater samples. The potential of this method to analyze environmental samples was demonstrated by characterizing AuNPs and silver nanoparticles (AgNPs) spiked in wastewater, where both NPs were revealed to form heteroaggregates with colloids existing in wastewater. The method can even directly analyze nanosized Ag particles inherent in the wastewater before adding external AgNPs. The result indicates that ATM-DMA-spICP-MS is a relatively simple two-dimensional size analysis method that has a great potential to characterize heteroaggregated NPs in aqueous environmental samples.

The micro-, submicron-, and nanoplastic hunt: A review of detection methods for plastic particles

Plastic particle pollution has been shown to be almost completely ubiquitous within our surrounding environment. This ubiquity in combination with a variety of unique properties (e.g. density, hydrophobicity, surface functionalization, particle shape and size, transition temperatures, and mechanical properties) and the ever-increasing levels of plastic production and use has begun to garner heightened levels of interest within the scientific community. However, as a result of these properties, plastic particles are often reported to be challenging to study in complex (i.e. real) environments. Therefore, this review aims to summarize research generated on multiple facets of the micro- and nanoplastics field; ranging from size and shape definitions to detection and characterization techniques to generating reference particles; in order to provide a more complete understanding of the current strategies for the analysis of plastic particles. This information is then used to provide generalized recommendations for researchers to consider as they attempt to study plastics in analytically complex environments; including method validation using reference particles obtained via the presented creation methods, encouraging efforts towards method standardization through the reporting of all technical details utilized in a study, and providing analytical pathway recommendations depending upon the exact knowledge desired and samples being studied.

Brownian sieving enhancement of microcapillary hydrodynamic chromatography. Analysis of the separation performance based on Brenner's macro-transport theory

In a recent article [Analytical Chemistry, 93(17), 6808-6816 (2021)], an unconventional device configuration enforcing a Brownian sieving mechanism was proposed as proof of concept for the efficient implementation of microcapillary hydrodynamic chromatography (MHDC). In this article, we perform a thorough analysis of the device geometry and of operating conditions, in order to single out the optimal configuration maximizing separation resolution. Brenner's macro-transport theory provides the technical picklock to perform the search for the optimum over a wide choice of device geometries and for a range of values of the particle Péclet number covering most conditions encountered in practical implementations of MHDC. Specifically, effective transport coefficients defining the dynamics of the suspended phase are obtained by the solution of a two-dimensional steady-state advection-diffusion equation defined onto the channel cross-section. The eigenvalue/eigenfunction structure of the associated transient problem is exploited in order to quantify the timescale for reaching the macro-transport regime conditions. Based on this timescale and on the effective transport parameters, an estimate of the column length necessary to achieve a prescribed level of separation resolution is obtained. We identify device geometry and operating conditions where the capillary length is shrunk down by a factor above ten compared to the standard MHDC configuration. Lagrangian stochastic statistics of particle ensembles are used to validate the results obtained through Brenner's macro-transport approach. The method proposed can be readily generalized to other classes of device geometries enforcing the same Brownian sieving mechanism.

Chemical Analysis of Microplastics and Nanoplastics: Challenges, Advanced Methods, and Perspectives

Microplastics and nanoplastics have become emerging particulate anthropogenic pollutants and rapidly turned into a field of growing scientific and public interest. These tiny plastic particles are found in the environment all around the globe as well as in drinking water and food, raising concerns about their impacts on the environment and human health. To adequately address these issues, reliable information on the ambient concentrations of microplastics and nanoplastics is needed. However, micro- and nanoplastic particles are extremely complex and diverse in terms of their size, shape, density, polymer type, surface properties, etc. While the particle concentrations in different media can vary by up to 10 orders of magnitude, analysis of such complex samples may resemble searching for a needle in a haystack. This highlights the critical importance of appropriate methods for the chemical identification, quantification, and characterization of microplastics and nanoplastics. The present article reviews advanced methods for the representative mass-based and particle-based analysis of microplastics, with a focus on the sensitivity and lower-size limit for detection. The advantages and limitations of the methods, and their complementarity for the comprehensive characterization of microplastics are discussed. A special attention is paid to the approaches for reliable analysis of nanoplastics. Finally, an outlook for establishing harmonized and standardized methods to analyze these challenging contaminants is presented, and perspectives within and beyond this research field are discussed.

Field-flow fractionation for nanoparticle characterization

This review presents field-flow fractionation: The elements of theory enable the link between the retention and the characteristics of the nanometer-sized analytes to be highlighted. In particular, the nature of force and its way of being applied are discussed. Four types of forces which determine four types of techniques were considered: hydrodynamic, sedimentation, thermal, and electrical; this is to show the importance of the choice of technique in relation to the characterization objectives. Then the separation performance is presented and compared with other separation techniques: field-flow fractionation has the greatest intrinsic separation capability. The characterization strategies are presented and discussed; on the one hand with respect to the characteristics needed for the description of nanoparticles; on the other hand in connection with the choice of the nature of the force, and also of the detectors used, online or offline. The discussion is based on a selection of published study examples. Finally, current needs and challenges are addressed, and as response, trends and possible characterization solutions.

[Application of non-stationary phase separation hyphenated with inductively coupled plasma mass spectrometry in the analysis of trace metal-containing nanoparticles in the environment]

环境中金属纳米颗粒的分析检测不仅需要关注其浓度和化学组成,还需要对其形状、粒径和表面电荷等进行表征。此外,环境中金属纳米颗粒的分析需要解决其低赋存浓度以及复杂基质干扰的难题。无固定相分离技术与电感耦合等离子体质谱(ICP-MS)的在线联用,具有较强的颗粒分离能力和较低的元素检出限,能够快速准确地提供金属纳米颗粒的粒径分布、化学组成等信息,在金属纳米颗粒的分离检测方面表现出极大的潜能。但这一联用技术尚无法获得金属纳米颗粒物的颗粒数浓度和单个颗粒的元素信息,难以判断金属纳米颗粒涂层厚度、纯度以及颗粒的均相/异相团聚行为等。新兴的单颗粒-电感耦合等离子体质谱(SP-ICP-MS)与无固定相分离技术的在线联用,可以获得金属纳米颗粒的流体动力学粒径、元素质量计算粒径和颗粒数浓度等信息,进而弥补无固定相分离与ICP-MS在线联用技术的不足。该文介绍了流体动力色谱、毛细管电泳和场流分离3种常用无固定相分离技术的分离机制和适用检测器,着重综述了无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的特点及其在环境金属纳米颗粒分析中的应用。关于场流分离,主要介绍了可以与ICP-MS联用的沉降场流分离和流场流分离。该文还对流体动力色谱、毛细管电泳和流场流分离与ICP-MS在线联用技术的特点进行了比较。最后,该文对无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的发展提出了展望。

Characterization of volcanic ash nanoparticles and study of their fate in aqueous medium by asymmetric flow field-flow fractionation-multi-detection

Dimensional and elemental characterization of environmental nanoparticles is a challenging task that requires the use of a set of complementary analytical methods. Asymmetric flow field-flow fractionation coupled with UV-Vis, multi-angle laser light scattering and ICP-MS detection was applied to study the nanoparticle fraction of a volcanic ash sample, in a Milli-Q water suspension at pH 6.8. It has been shown that the separated by sedimentation nanoparticle fraction of the Klyuchevskoy volcano ash suspension contains 3 polydisperse populations for which size ranges (expressed in gyration radius, rG), hydrodynamic behaviours (evaluated via shape index) and elemental compositions are different. These 3 populations did not dissolve over the 72-h study but aggregated and settled out differently. Thus, the population of particles with gyration radii <140 nm (P1), which contained 6% Al₂O₃ and represented approximately 20% by mass of the nanoparticle fraction, remained in suspension without observable aggregation. The populations P2 and P3, which represented 67% and 13% by mass in the initial suspension, covered the rG range 25-250 nm and contained 17% and 15% Al₂O₃, respectively. Over time, populations P2 and P3 aggregated and their concentration in suspension at 72 h decreased by approximately 40% compared with the initial suspension. The decrease of these nanoparticle populations occurred either from the beginning of the temporal monitoring (P2) or after 30 h (P3). Aggregation generated a new population (P4) in suspension with rG up to 300 nm and mostly consisting of P2. This population represented only up to 6 to 7% of the nanoparticle fraction and decreased beyond 50 h. As a result, the trace elements present in the nanoparticle fraction and monitored (Cu and La) were also no longer found in the suspension. The results obtained can offer additional insights into the fate of volcanic ash nanoparticles in the environment.

Quantification of Nanoparticles in Dispersions Using Transmission Electron Microscopy

The quantification of the particle size and the number concentration (PNC) of nanoparticles (NPs) is key for the characterization of nanomaterials. Transmission electron microscopy (TEM) is often considered as the gold standard for assessing the size of NPs; however, the TEM sample preparation suitable for estimating the PNC based on deposited NPs is challenging. Here, we use an ultrasonic nebulizer (USN) to transfer NPs from aqueous suspensions into dried aerosols which are deposited on TEM grids in an electrostatic precipitator of an aerosol monitor. The deposition efficiency of the electrostatic precipitator was ≈2%, and the transport efficiency of the USN was ≈7%. Experiments using SiO2 NPs (50–200 nm) confirmed an even deposition of the nebulized particles in the center of the TEM grids. PNCs of the SiO2 NPs derived from TEM images underestimated the expected PNCs of the suspensions by a factor of up to three, most likely resulting from droplet coagulation and NP aggregation in the USN. Nevertheless, single particles still dominated the PNC. Our approach results in reproducible and even deposition of particles on TEM grids suitable for morphological analysis and allows an estimation of the PNC in the suspensions based on the number of particles detected by TEM.

Brownian Sieving Effect for Boosting the Performance of Microcapillary Hydrodynamic Chromatography. Proof of Concept

Microcapillary hydrodynamic chromatography (MHDC) is a well-established technique for the size-based separation of suspensions and colloids, where the characteristic size of the dispersed phase ranges from tens of nanometers to micrometers. It is based on hindrance effects which prevent relatively large particles from experiencing the low velocity region near the walls of a pressure-driven laminar flow through an empty microchannel. An improved device design is here proposed, where the relative extent of the low velocity region is made tunable by exploiting a two-channel annular geometry. The geometry is designed so that the core and the annular channel are characterized by different average flow velocities when subject to one and the same pressure drop. The channels communicate through openings of assigned cut-off length, say A. As they move downstream the channel, particles of size bigger than A are confined to the core region, whereas smaller particles can diffuse through the openings and spread throughout the entire cross section, therein attaining a spatially uniform distribution. By using a classical excluded-volume approach for modeling particle transport, we perform Lagrangian-stochastic simulations of particle dynamics and compare the separation performance of the two-channel and the standard (single-channel) MHDC. Results suggest that a quantitative (up to thirtyfold) performance enhancement can be obtained at operating conditions and values of the transport parameters commonly encountered in practical implementations of MHDC. The separation principle can readily be extended to a multistage geometry when the efficient fractionation of an arbitrary size distribution of the suspension is sought.

A review of microplastics aggregation in aquatic environment: Influence factors, analytical methods, and environmental implications

A large amount of plastic waste released into natural waters and their demonstrated toxicity have made the transformation of microplastics (MPs; < 5 mm) and nanoplastics (NPs; < 100 nm) an emerging environmental concern. Aggregation is one of the most important environmental behaviors of MPs, especially in aquatic environments, which determines the mobility, distribution and bioavailability of MPs. In this paper, the sources and inputs of MPs in aquatic environments were first summarized followed by the analytical methods for investigating MP aggregation, including the sampling, visualization, and quantification procedures of MP' particle sizes. We critically evaluated the sampling methods that still remains a methodological gap. Identification and quantification of MPs were mostly carried out by visual, spectroscopic and spectrometric techniques, and modeling analysis. Important factors affecting MP aggregation in natural waters and environmental implications of the aggregation process were also reviewed. Finally, recommendations for future research were discussed, including (1) conducting more field studies; (2) using MPs in laboratory works representing those in the environment; and (3) standardizing methods of identification and quantification. The review gives a comprehensive overview of current knowledge for MP aggregation in natural waters, identifies knowledge gaps, and provides suggestions for future research.

Size measurement of silica nanoparticles by Asymmetric Flow Field-Flow Fractionation coupled to Multi-Angle Light Scattering: A comparison exercise between two metrological institutes

In this work we present a comparison exercise between two metrological institutes for size measurement of silica nanoparticles by Asymmetrical Flow Field-Flow Fractionation (AF4) coupled to static light scattering. The work has been performed in the frame of a French inter-laboratory comparison (ILC) exercise organized by the nanoMetrology Club (CnM). The general aim of this multi-technique comparison was to improve the measurement process for each technique, after establishing a well-defined measurement procedure. The results obtained by two national metrological institutes (NMIs), the LNE (France) and the SMD (Belgium) by AF4-UV-DRI-MALS will be presented and discussed. Three different samples were characterized: the reference material ERM®-FD304, which is a suspension of colloidal silica in aqueous solution and two silica bimodal samples consisting of two populations of SiO₂ nanoparticles of unknown size in aqueous solution, with different populations' ratios. The procedure for the preparation of the sample before the analysis, and main separation parameters have been previously defined between the two institutes and will be described. The principals measured parameters were the weight-average (d_{ge_w}), number-average (d_{ge_n}) and z-average (d_{ge_z}) geometric diameter; the average hydrodynamic diameter (d_h); and the diameter obtained by external calibration using polystyrene latex standards (d_cal). Results between the two NMIs were comparable and coherent with the expected size values of those obtained by other techniques like Scanning Mobility Particle Sizer (SMPS) and Scanning Electron Microscopy (SEM) also involved in this ILC exercise. Where discrepancies are observed, they leave the results compatible within their uncertainties and underpin the challenges in analysing data and reporting results, making AF4 a powerful tool to compare to other measurement techniques.

Critical Assessment of Analytical Methods for the Harmonized and Cost-Efficient Analysis of Microplastics

Microplastics are of major concerns for society and is currently in the focus of legislators and administrations. A small number of measures to reduce or remove primary sources of microplastics to the environment are currently coming into effect. At the moment, they have not yet tackled important topics such as food safety. However, recent developments such as the 2018 bill in California are requesting the analysis of microplastics in drinking water by standardized operational protocols. Administrations and analytical labs are facing an emerging field of methods for sampling, extraction, and analysis of microplastics, which complicate the establishment of standardized operational protocols. In this review, the state of the currently applied identification and quantification tools for microplastics are evaluated providing a harmonized guideline for future standardized operational protocols to cover these types of bills. The main focus is on the naked eye detection, general optical microscopy, the application of dye staining, flow cytometry, Fourier transform infrared spectroscopy (FT-Ir) and microscopy, Raman spectroscopy and microscopy, thermal degradation by pyrolysis-gas chromatography-mass spectrometry (py-GC-MS) as well as thermo-extraction and desorption gas chromatography-mass spectrometry (TED-GC-MS). Additional techniques are highlighted as well as the combined application of the analytical techniques suggested. An outlook is given on the emerging aspect of nanoplastic analysis. In all cases, the methods were screened for limitations, field work abilities and, if possible, estimated costs and summarized into a recommendation for a workflow covering the demands of society, legislation, and administration in cost efficient but still detailed manner.

Separation, characterization and identification of microplastics and nanoplastics in the environment

Microplastics (MPs) have globally been detected in aquatic and marine environments, which has raised scientific interests and public health concerns during the past decade. MPs are those polymeric particles with at least one dimension <5 mm. MPs possess complex physicochemical properties that vary their mobility, bioavailability and toxicity toward organisms and interactions with their surrounding pollutants. Similar to nanomaterials and nanoparticles, accurate and reliable detection and measurement of MPs or nanoplastics and their characteristics are important to warrant a comprehensive understanding of their environmental and ecological impacts. This review elaborates the principles and applications of diverse analytical instruments or techniques for separation, characterization and quantification of MPs in the environment. The strength and weakness of different instrumental methods in separation, morphological, physical classification, chemical characterization and quantification for MPs are critically compared and analyzed. There is a demand for standardized experimental procedures and characterization analysis due to the complex transformation, cross-contamination and heterogeneous properties of MPs in size and chemical compositions. Moreover, this review highlights emerging and promising characterization techniques that may have been overlooked by research communities to study MPs. The future research efforts may need to develop and implement new analytical tools and combinations of hyphenated technologies to complement respective limitations of detection and yield reliable characterization information for MPs. The goal of this critical review is to facilitate the research of plastic particles and pollutants in the environment and understanding of their environmental and human health effects.

Nanoanalytics: history, concepts, and specificities

This article deals with analytical chemistry devoted to nano-objects. A short review presents nano-objects, their singularity in relation to their dimensions, genesis, and possible transformations. The term nano-object is then explained. Nano-object characterization activities are considered and a definition of nanoanalytics is proposed. Parameters and properties for describing nano-objects on an individual scale and on the scale of a population are also presented. They enable the specificities of analytical activities to be highlighted in terms of multi-criteria description strategies and observation scale. Special attention is given to analytical methods, their dimensioning and validation.

Miniaturized liquid chromatography coupled on-line to in-tube solid-phase microextraction for characterization of metallic nanoparticles using plasmonic measurements. A tutorial

This tutorial aims at providing guidelines for analyzing metallic nanoparticles (NPs) and their dispersions by using methods based on miniaturized liquid chromatography with diode array detection (MinLC-DAD) and coupled on-line to in-tube solid-phase microextraction (IT-SPME). Some practical advice and considerations are given for obtaining reliable results. In addition, this work outlines the potential applications that set these methodologies apart from microscopy-related techniques, dynamic light scattering, single particle ICP-MS, capillary electrophoresis, field-flow fractionation and other chromatographic configurations, which are discussed and mainly seek to accomplish size estimation and NP separation, speciation analysis and quantification of mainly AgNPs and AuNPs. MinLC-DAD has the potential to estimate the NP concentration and from it the average size of unknown samples by calibrating with a single standard, as well as studying potentially non-spherical particles and stability-related properties of their dispersions. While keeping the signal dependency with concentration and increasing the method sensitivity, IT-SPME-MinLC-DAD goes further allowing for the assessment of the dispersant effect and ultimately changes in the nanoparticle surroundings that range from modifications of the hydrodynamic diameter to the exposure to different reagents and matrices. The methodology can still be improved by either exploring newer IT-SPME adsorbents or by assaying new system configurations. Taking into account that this technique gives complementary information in relation to other techniques discussed here, this tutorial serves as a guide for analyzing metallic NPs towards a better understanding of the particle behavior under different scenarios.

Supercritical carbon dioxide-based technologies for the production of drug nanoparticles/nanocrystals - A comprehensive review

Low drug bioavailability, which is mostly a result of poor aqueous drug solubilities and of inadequate drug dissolution rates, is one of the most significant challenges that pharmaceutical companies are currently facing, since this may limit the therapeutic efficacy of marketed drugs, or even result in the discard of potential highly effective drug candidates during developmental stages. Two of the main approaches that have been implemented in recent years to overcome poor drug solubility/dissolution issues have frequently involved drug particle size reduction (i.e., micronization/nanonization) and/or the modification of some of the physicochemical and structural properties of poorly water soluble drugs. A large number of particle engineering methodologies have been developed, tested, and applied in the synthesis and control of particle size/particle-size distributions, crystallinities, and polymorphic purities of drug micro- and nano-particles/crystals. In recent years pharmaceutical processing using supercritical fluids (SCF), in general, and supercritical carbon dioxide (scCO₂), in particular, have attracted a great attention from the pharmaceutical industry. This is mostly due to the several well-known advantageous technical features of these processes, as well as to other increasingly important subjects for the pharmaceutical industry, namely their "green", sustainable, safe and "environmentally-friendly" intrinsic characteristics. In this work, it is presented a comprehensive state-of-the-art review on scCO₂-based processes focused on the formation and on the control of the physicochemical, structural and morphological properties of amorphous/crystalline pure drug nanoparticles. It is presented and discussed the most relevant scCO₂, scCO₂-based fluids and drug physicochemical properties that are pertinent for the development of successful pharmaceutical products, namely those that are critical in the selection of an adequate scCO₂-based method to produce pure drug nanoparticles/nanocrystals. scCO₂-based nanoparticle formation methodologies are classified in three main families, and in terms of the most important role played by scCO₂ in particle formation processes: as a solvent; as an antisolvent or a co-antisolvent; and as a "high mobility" additive (a solute, a co-solute, or a co-solvent). Specific particle formation methods belonging to each one of these families are presented, discussed and compared. Some selected amorphous/crystalline drug nanoparticles that were prepared by these methods are compiled and presented, namely those studied in the last 10-15 years. A special emphasis is given to the formation of drug cocrystals. It is also discussed the fundamental knowledge and the main mechanisms in which the scCO₂-based particle formation methods rely on, as well as the current status and urgent needs in terms of reliable experimental data and of robust modeling approaches. Other addressed and discussed topics include the currently available and the most adequate physicochemical, morphological and biological characterization methods required for pure drug nanoparticles/nanocrystals, some of the current nanometrology and regulatory issues associated to the use of these methods, as well as some scale-up, post-processing and pharmaceutical regulatory subjects related to the industrial implementation of these scCO₂-based processes. Finally, it is also discussed the current status of these techniques, as well as their future major perspectives and opportunities for industrial implementation in the upcoming years.

Asymmetrical flow field flow fractionation methods to characterize submicron particles: application to carbon-based aggregates and nanoplastics

In the last 10 years, asymmetrical flow field flow fractionation (AF4) has been one of the most promising approaches to characterize colloidal particles. Nevertheless, despite its potentialities, it is still considered a complex technique to set up, and the theory is difficult to apply for the characterization of complex samples containing submicron particles and nanoparticles. In the present work, we developed and propose a simple analytical strategy to rapidly determine the presence of several submicron populations in an unknown sample with one programmed AF4 method. To illustrate this method, we analyzed polystyrene particles and fullerene aggregates of size covering the whole colloidal size distribution. A global and fast AF4 method (method O) allowed us to screen the presence of particles with size ranging from 1 to 800 nm. By examination of the fractionating power F _d, as proposed in the literature, convenient fractionation resolution was obtained for size ranging from 10 to 400 nm. The global F _d values, as well as the steric inversion diameter, for the whole colloidal size distribution correspond to the predicted values obtained by model studies. On the basis of this method and without the channel components or mobile phase composition being changed, four isocratic subfraction methods were performed to achieve further high-resolution separation as a function of different size classes: 10-100 nm, 100-200 nm, 200-450 nm, and 450-800 nm in diameter. Finally, all the methods developed were applied in characterization of nanoplastics, which has received great attention in recent years. Graphical Absract Characterization of the nanoplastics by asymmetrical flow field flow fractionation within the colloidal size range.

Nanoparticle Analysis by Online Comprehensive Two-Dimensional Liquid Chromatography combining Hydrodynamic Chromatography and Size-Exclusion Chromatography with Intermediate Sample Transformation

Polymeric nanoparticles have become indispensable in modern society with a wide array of applications ranging from waterborne coatings to drug-carrier-delivery systems. While a large range of techniques exist to determine a multitude of properties of these particles, relating physicochemical properties of the particle to the chemical structure of the intrinsic polymers is still challenging. A novel, highly orthogonal separation system based on comprehensive two-dimensional liquid chromatography (LC × LC) has been developed. The system combines hydrodynamic chromatography (HDC) in the first-dimension to separate the particles based on their size, with ultrahigh-performance size-exclusion chromatography (SEC) in the second dimension to separate the constituting polymer molecules according to their hydrodynamic radius for each of 80 to 100 separated fractions. A chip-based mixer is incorporated to transform the sample by dissolving the separated nanoparticles from the first-dimension online in tetrahydrofuran. The polymer bands are then focused using stationary-phase-assisted modulation to enhance sensitivity, and the water from the first-dimension eluent is largely eliminated to allow interaction-free SEC. Using the developed system, the combined two-dimensional distribution of the particle-size and the molecular-size of a mixture of various polystyrene (PS) and polyacrylate (PACR) nanoparticles has been obtained within 60 min.

Multimodal Dispersion of Nanoparticles: A Comprehensive Evaluation of Size Distribution with 9 Size Measurement Methods

PURPOSE

Evaluation of particle size distribution (PSD) of multimodal dispersion of nanoparticles is a difficult task due to inherent limitations of size measurement methods. The present work reports the evaluation of PSD of a dispersion of poly(isobutylcyanoacrylate) nanoparticles decorated with dextran known as multimodal and developed as nanomedecine.

METHODS

The nine methods used were classified as batch particle i.e. Static Light Scattering (SLS) and Dynamic Light Scattering (DLS), single particle i.e. Electron Microscopy (EM), Atomic Force Microscopy (AFM), Tunable Resistive Pulse Sensing (TRPS) and Nanoparticle Tracking Analysis (NTA) and separative particle i.e. Asymmetrical Flow Field-Flow Fractionation coupled with DLS (AsFlFFF) size measurement methods.

RESULTS

The multimodal dispersion was identified using AFM, TRPS and NTA and results were consistent with those provided with the method based on a separation step prior to on-line size measurements. None of the light scattering batch methods could reveal the complexity of the PSD of the dispersion.

CONCLUSIONS

Difference between PSD obtained from all size measurement methods tested suggested that study of the PSD of multimodal dispersion required to analyze samples by at least one of the single size particle measurement method or a method that uses a separation step prior PSD measurement.

Probing effects of polymer adsorption in colloidal particle suspensions by light scattering as relevant for the aquatic environment: An overview

Modification of particle surfaces by adsorption of polymers is a process that governs particle behavior in aqueous environmental systems. The present article briefly reviews the current understanding of the adsorption mechanisms and the properties of the resulting layers, and it discusses two environmentally relevant cases of particle modification by polymers. In particular, the discussion focuses on the usefulness of methods based on light scattering to probe such adsorbed layers together with the resulting properties of the particle suspensions, and it highlights advantages and disadvantages of these techniques. Measurement of the electrophoretic mobility allows to follow the development of the adsorption layer and to characterize the charge of the modified particles. At saturation, the surface charge is governed by the charge of the adsorbed film. Dynamic light scattering provides information on the film thickness and on the behavior of the modified suspensions. The charge and the structure of the adsorbed layer influence the stability of the particles, as well as the applicability of the classical theory of Derjaguin, Landau, Verwey, and Overbeek (DLVO). This fundamental knowledge is presented in the light of environmental systems and its significance for applied systems is underlined. In particular, the article discusses two examples of environmental processes involving adsorption of polymers, namely, the modification of particles by natural adsorption of humic substances and the tailoring of surface properties of iron-based particles used to remediate contaminated aquifers.

Understanding the fate and biological effects of Ag- and TiO₂-nanoparticles in the environment: The quest for advanced analytics and interdisciplinary concepts

Engineered inorganic nanoparticles (EINP) from consumers' products and industrial applications, especially silver and titanium dioxide nanoparticles (NP), are emitted into the aquatic and terrestrial environments in increasing amounts. However, the current knowledge on their environmental fate and biological effects is diverse and renders reliable predictions complicated. This review critically evaluates existing knowledge on colloidal aging mechanisms, biological functioning and transport of Ag NP and TiO2 NP in water and soil and it discusses challenges for concepts, experimental approaches and analytical methods in order to obtain a comprehensive understanding of the processes linking NP fate and effects. Ag NP undergo dissolution and oxidation with Ag2S as a thermodynamically determined endpoint. Nonetheless, Ag NP also undergo colloidal transformations in the nanoparticulate state and may act as carriers for other substances. Ag NP and TiO2 NP can have adverse biological effects on organisms. Whereas Ag NP reveal higher colloidal stability and mobility, the efficiency of NOM as a stabilizing agent is greater towards TiO2 NP than towards Ag NP, and multivalent cations can dominate the colloidal behavior over NOM. Many of the past analytical obstacles have been overcome just recently. Single particle ICP-MS based methods in combination with field flow fractionation techniques and hydrodynamic chromatography have the potential to fill the gaps currently hampering a comprehensive understanding of fate and effects also at a low field relevant concentrations. These analytical developments will allow for mechanistically orientated research and transfer to a larger set of EINP. This includes separating processes driven by NP specific properties and bulk chemical properties, categorization of effect-triggering pathways directing the EINP effects towards specific recipients, and identification of dominant environmental parameters triggering fate and effect of EINP in specific ecosystems (e.g. soil, lake, or riverine systems).

Bridging the divide between human and environmental nanotoxicology

The need to assess the human and environmental risks of nanoscale materials has prompted the development of new metrological tools for their detection, quantification and characterization. Some of these methods have tremendous potential for use in various scenarios of nanotoxicology. However, in some cases, the limited dialogue between environmental scientists and human toxicologists has hampered the full exploitation of these resources. Here we review recent progress in the development of methods for nanomaterial analysis and discuss the use of these methods in environmental and human toxicology. We highlight the opportunities for collaboration between these two research areas.

Nanomaterials in consumer products: a challenging analytical problem

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits vs. risks of engineered nanomaterials and consequently to legislate in favor of consumer's protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices.

Capillary electrophoresis/inductively-coupled plasma-mass spectrometry: development and optimization of a high resolution analytical tool for the size-based characterization of nanomaterials in dietary supplements

We report the development and optimization of a system consisting of capillary electrophoresis (CE) interfaced with inductively coupled plasma mass spectrometry (ICPMS) for rapid and high resolution speciation and characterization of metallic (e.g., gold, platinum, and palladium) nanoparticles in a dietary supplement. Multiple factors, including surfactant type and concentration, pH of running buffer, and applied voltage, were investigated to optimize the separation conditions. It was found that by using the anionic surfactant sodium dodecyl benzenesulfonate (SDBS) in the running buffer the separation resolution was significantly improved, allowing for easy distinction of adjacent size fractions in a gold nanoparticle mixture with very small size differences (e.g., 5, 15, 20, and 30 nm). The type and concentration of the surfactant was found to be critical in obtaining sufficient separation while applied voltage and pH values of the running buffers largely affected the elution times by varying the electroosmotic flow. Quantum dots were used as mobility markers to eliminate the run-to-run variation. The diameters of the nanoparticles followed a linear relationship with their relative electrophoretic mobility, and size information on unknown samples could be extrapolated from a standard curve. The accuracy and precision of this method was confirmed using 10 and 30 nm gold nanoparticle standard reference materials. Furthermore, the method was successfully applied to the analysis of commercially available metallic nanoparticle-based dietary supplements, as evidenced by good agreement between the particle sizes calculated by CE/ICPMS and transmission electron microscopy (TEM).

Evaluation of hydrodynamic chromatography coupled with UV-visible, fluorescence and inductively coupled plasma mass spectrometry detectors for sizing and quantifying colloids in environmental media

In this study, we evaluated hydrodynamic chromatography (HDC) coupled with inductively coupled plasma mass spectrometry (ICP-MS) for the analysis of nanoparticles in environmental samples. Using two commercially available columns (Polymer Labs-PDSA type 1 and 2), a set of well characterised calibrants and a new external time marking method, we showed that flow rate and eluent composition have few influence on the size resolution and, therefore, can be adapted to the sample particularity. Monitoring the agglomeration of polystyrene nanoparticles over time succeeded without observable disagglomeration suggesting that even weak agglomerates can be measured using HDC. Simultaneous determination of gold colloid concentration and size using ICP-MS detection was validated for elemental concentrations in the ppb range. HDC-ICP-MS was successfully applied to samples containing a high organic and ionic background. Indeed, online combination of UV-visible, fluorescence and ICP-MS detectors allowed distinguishing between organic molecules and inorganic colloids during the analysis of Ag nanoparticles in synthetic surface waters and TiO₂ and ZnO nanoparticles in commercial sunscreens. Taken together, our results demonstrate that HDC-ICP-MS is a flexible, sensitive and reliable method to measure the size and the concentration of inorganic colloids in complex media and suggest that there may be a promising future for the application of HDC in environmental science. Nonetheless the rigorous measurements of agglomerates and of matrices containing natural colloids still need to be studied in detail.

Discriminating the states of matter in metallic nanoparticle transformations: what are we missing?

A limiting factor in assessing the risk of current and emerging nanomaterials in biological and environmental systems is the ability to accurately detect and characterize their size, shape, and composition in broad product distributions and complex media. Asymmetric flow field-flow fractionation (A4F) is capable of separation without stationary phase interactions or large applied forces. Here, we demonstrate unprecedented A4F fractionation of metallic nanoclusters with core diameters near 1 nm and with high resolution. The isolated nanocluster populations were characterized online with UV-vis absorption and inductively coupled plasma mass spectrometry (ICP-MS). We apply our methodology to a model system, poly(N-vinyl-2-pyrrolidone)-protected silver nanoparticles with an excess of tripeptide-glutathione (GSH). The temporal evolution of the initial silver nanoparticle distribution in the presence of excess GSH results in the appearance and persistence of a continuum of matter states (e.g., Ag(+) nanoclusters and nanoparticles) that could be fractionated with A4F, characterized by their optical signatures and diffusion coefficients, and quantified with ICP-MS. The results suggest that our methodology is generally applicable to metallic systems when appropriate online detection is coupled to the A4F. Because we extend the capability of the coupled A4F system to reliably detect, characterize, and quantify metallic populations in the sub-5 nm regime, the opportunity exists to survey the formation and transformation products of nanomaterials in more relevant biological and environmental systems. Thus, individually assessing the risks associated with specific ion, nanocluster, and nanoparticle populations is achievable, where such populations may have previously been misrepresented.

Emerging techniques for submicrometer particle sizing applied to Stöber silica

The accurate characterization of submicrometer and nanometer sized particles presents a major challenge in the diverse applications envisaged for them including cosmetics, biosensors, renewable energy, and electronics. Size is one of the principal parameters for classifying particles and understanding their behavior, with other particle characteristics usually only quantifiable when size is accounted for. We present a comparative study of emerging and established techniques to size submicrometer particles, evaluating their sizing precision and relative resolution, and demonstrating the variety of physical principles upon which they are based, with the aim of developing a framework in which they can be compared. We used in-house synthesized Stöber silica particles between 100 and 400 nm in diameter as reference materials for this study. The emerging techniques of scanning ion occlusion sensing (SIOS), differential centrifugal sedimentation (DCS), and nanoparticle tracking analysis (NTA) were compared to the established techniques of transmission electron microscopy (TEM), scanning mobility particle sizing (SMPS), and dynamic light scattering (DLS). The size distributions were described using the mode, arithmetic mean, and standard deviation. Uncertainties associated with the six techniques were evaluated, including the statistical uncertainties in the mean sizes measured by the single-particle counting techniques. Q-Q plots were used to analyze the shapes of the size distributions. Through the use of complementary techniques for particle sizing, a more complete characterization of the particles was achieved, with additional information on their density and porosity attained.

Engineered nanoparticles and their identification among natural nanoparticles

The more nanotechnology develops, the more likely the release of engineered nanoparticles into the environment becomes. Due to a huge excess of natural nanoparticles, the identification and quantification of engineered nanoparticles pose a big challenge to analysts. Moreover, identification in a qualitative sense and quantification by mass concentration alone are not sufficient, because the potential environmental hazard arising from engineered nanoparticles is controlled by many other properties of the particles. We discuss the most important methods of fractionation and detection of both natural and engineered nanoparticles, with a focus on the chemical nature of the particles, particle concentration, and particle size. Analyses should not rely on only one method; instead, several complementary methods should, if possible, be used. Coupled techniques should be further developed and increasingly applied. Dedicated techniques that are tailored to the search for a particular sort of engineered nanoparticles are more promising than universal approaches that search for any engineered nanoparticles.