Flower-like self-assembly of gold nanoparticles for highly sensitive electrochemical detection of chromium(VI)

Cr-Detector: A simple chemosensing system for onsite Cr (VI) detection in water

Due to the increase in urbanization and industrialization, the load of toxicants in the environment is alarming. The most common toxicants, including heavy metals and metalloids such as hexavalent Chromium, have severe pathophysiological impacts on humans and other aquatic biotas. Therefore, developing a portable rapid detection device for such toxicants in the aquatic environment is necessary. This work portrays the development of a field-portable image analysis device coupled with 3,3',5,5'-tetramethylbenzidine (TMB) as a sensing probe for chromium (VI) detection in the aquatic ecosystem. Sensor parameters, such as reagent concentration, reaction time, etc., were optimized for the sensor development and validation using a commercial UV-Vis spectrophotometer. The chemoreceptor integrated with a uniform illumination imaging system (UIIS) revealed the system's applicability toward Cr(VI) detection. The calibration curve using the R-value of image parameters allows Cr(VI) detection in the linear range of 25 to 600 ppb, which covers the prescribed permissible limit by various regulatory authorities. Furthermore, the adjusted R2 = 0.992 of the linear fit and correlation coefficients of 0.99018 against the spectrophotometric method signifies the suitability of the developed system. This TMB-coupled field-portable sensing system is the first-ever reported image analysis-based technology for detecting a wide range of Cr(VI) in aquatic ecosystems to our knowledge.

Label-free and ultrasensitive electrochemical transferrin detection biosensor based on a glassy carbon electrode and gold nanoparticles

In this study, we developed a label-free and ultrasensitive electrochemical biosensor for the detection of transferrin (Tf), an important serum biomarker of atransferrinemia. The biosensor was fabricated by using glassy carbon electrode (GCE) and modified with gold nanoparticles (AuNPs) via electroless deposition. The electrochemical characteristics of the GCE-AuNPs biosensors were characterized using cyclic voltammetry and electrochemical impedance spectroscopy analysis. Differential pulse voltammetry was used for quantitative evaluation of the Tf-antigen by recording the increase in the anodic peak current of GCE-AuNPs biosensor. The GCE-AuNPs biosensor demonstrates superior sensing performance for Tf-antigen fortified in buffer, with a wide linear range of 0.1 to 5000 μg/mL and a limit of detection of 0.18 μg/mL. The studied GCE-AuNPs biosensor showed excellent sensitivity, selectivity, long-term storage stability and simple sensing steps without pretreatment of clinical samples. This GCE-AuNPs biosensor indicates great potential for developing a Tf detection platform, which would be helpful in the early diagnosis of atransferrinemia. The developed GCE-AuNPs biosensor holds great potential in biomedical research related to point of care for the early diagnosis and monitoring of diseases associated with aberrant serum transferrin levels. These findings suggest that the GCE-AuNPs biosensor has great potential for detecting other serum biomarkers.

Ultrasensitive biosensing of thiram based on detection of the DNA damage induced by thiram: Application to investigation of protective effects of extra virgin olive oil against DNA damage

In this work, a novel electrochemical biosensor was fabricated based on modification of a glassy carbon electrode (GCE) with nafion-DNA/gold nanoparticles/poly-ethylenedioxy pyrrole/multi-walled carbon nanotubes-ionic liquid (NF-DNA/Au NPs/PEDOP/MWCNTs-IL/GCE) with the aim of amperometric detection of the DNA damage induced by thiram (TH). By incubation of the biosensor with the TH, the TH was intercalated within DNA, and the exposed DNA released negative charges at the surface of the biosensor which repelled the probe molecules and caused the amperometric response of the biosensor to be decreased. Protective effects of extra virgin olive oil (EVOO) on the DNA damage induced by the TH were investigated by recording amperometric responses of the biosensor in the presence of EVOO, and the results confirmed that the response of the biosensor didn't change to confirm the protective effects of the EVOO on preventing the DNA damage induced by the TH. A novel and sensitive electroanalytical method was developed for determination of the TH in two linear ranges including 1-6 pM and 7-10 pM based on amperometric detection of the DNA damage induced by the TH which gave a LOD of 0.31 pM. The developed methodology in this work was successful in detection of the DNA damage induced by TH, detection of protective effects of EVOO on preventing DNA damage and determination of the TH in real matrices.

Inner-filter Effect Induced Fluorescence Quenching of Carbon Dots for Cr(VI) Detection with High Sensitivity

Carbon dots (CDs) were used to develop a sensitive sensing technique for detecting Cr(VI). CDs were made using a hydrothermal technique from citric acid and glutamic acid. These prepared CDs emitted blue fluorescence under excitation of 350 nm (λ_em = 420 nm), and the fluorescence quantum yield was 48.41%. Transmission electron microscope was used to examine the morphology of the CDs, which had an average size of 2.21 ± 0.39 nm. The elementary composition and bonding structure of the CDs were conducted by XPS and FT-IR spectrum. Cr(VI) quenched the fluorescence of CDs through a static quenching effect and an inner filter effect, allowing Cr(VI) to be detected quantitatively. This approach was used to detect Cr(VI) in two samples of water, with the findings demonstrating that it is reliable and accurate. The fluorescence intensity change was linearly related to the concentration of Cr(VI) in the range from 0.5 to 400 μM, with the detection limit being 0.10 μM. This approach has the virtues of wide detection range, low cost and fast response. The strategy has a great application prospect for detecting Cr(VI) in practical samples.

2,6-bis(E)-4-methylbenzylidine)-cyclohexan-1-one as a Fluorescent-on Sensor for Ultra Selective Detection of Chromium Ion in Aqueous Media

The ligand 2,6-bis(E)-4-methylbenzylidine)-cyclohexan-1-one sensor has been synthesized as a fluorescence-on sensor/probe for the trace level detection of chromium III ion. The synthesized ligand was characterized by FTIR, ¹H-NMR spectroscopy, and fluorimetery. The sensor exhibited an ultra-selective response to chromium among the tested heavy metal ions. Different parameters were optimized like pH, effect of concentration of sensor C, metal ion and contact time. The binding stoichiometry of C:Cr³⁺ was calculated to be 2:1 (Job's plot) with a significantly low detection limit of 2.3 × 10^{- 9} M. Sensor C were practically employed for detection of chromium in spiked water samples.

Electrochemical reduction of Cr(VI) in water: lessons learned from fundamental studies and applications

Converting toxic Cr(vi) to benign Cr(iii) would offer a solution to decontaminate drinking water. Electrochemical methods are ideally suited to carry out this reduction without added external reductants. Achieving this transformation at low overpotentials requires mediating the transfer of protons and electrons to Cr(vi). In this review thermodynamic parameters will be discussed to understand Cr(vi) speciation in water and identify reduction pathways. The electrochemical reduction of Cr(vi) at bare electrodes is reviewed and mechanistic considerations are discussed. Works on modified electrodes are compared to identify key parameters influencing the reduction. An overview of current applications to Cr(vi) reduction is briefly discussed to link fundamental studies to applications.

Biologically inspired catalyst for electrochemical reduction of hazardous hexavalent chromium

An indirect electrochemical detoxification and detection platform has been demonstrated for toxic hexavalent chromium (Cr(vi)) based on the biologically important N-4 macrocycle. The research work describes a simple, green, low-cost and potential way for the synthesis of a new N-4 macrocyclic molecule and the molecule is characterized by various analytical and spectroscopic techniques like elemental analysis, TGA, FT-IR, UV-visible, mass spectrometry and NMR spectroscopies, and cyclic voltammetry. The synthesized molecule was explored for the electrochemical reduction of Cr(vi) using both voltammetric and amperometric methods. Amperometric studies exhibited 50 to 2500 nM linear range and the detection limit and quantification limit are 18 and 50 nM, respectively. The common coexisting metal ions did not interfere with Cr(vi) even in the presence of 40-fold excess interfering ions. The real sample analysis was carried out with the fabricated sensor and successfully quantified a recovery result (98-104%) of Cr(vi) in water. This proposed sensor is helpful in the detection of chromium ions in drinking water and is capable of detecting Cr(vi) in the limits set by the World Health Organization (WHO). In addition, this sensor satisfactorily demonstrated considerable stability and reproducibility.

Determination of Chromium in Natural Water by Adsorptive Stripping Voltammetry Using In Situ Bismuth Film Electrode

Development of adsorptive stripping voltammetry (AdSV) combined with in situ prepared bismuth film electrode (in situ BiFE) on glassy carbon disk surface using diethylenetriamine pentaacetic acid (DTPA) as a complexing agent and NO₃⁻ as a catalyst to determine the trace amount of chromium (VI) is demonstrated. According to this method, in the preconcentration step at E_dep = −800 mV, the bismuth film is coated on the surface of glassy carbon electrodes simultaneously with the adsorption of complexes Cr(III)-DTPA. In addition to the influencing factors, the stripping voltammetry performance factors such as deposition potential, deposition time, equilibration time, cleaning potential, cleaning time, and technical parameters of differential pulse and square wave voltammetries have been investigated, and the influence of Cr(III), Co(II), Ni(II), Ca(II), Fe(III), SO₄²⁻, Cl⁻, and Triton X has also been investigated. This method gained good repeatability with RSD <4% (n = 9) for the differential pulse adsorptive stripping voltammetry (DP-AdSV) and RSD < 3% (n = 7) for the square wave adsorptive stripping voltammetry (SqW-AdSV), and low limit of detection: LOD = 12.10⁻⁹ M ≈ 0.6 ppb (at a deposition potential (E_dep) of −800 mV and the deposition time (t_dep) of 50 s) and LOD = 2.10⁻⁹ M ≈ 0.1 ppb (at E_dep = −800 mV and t_dep = 160 s) for the DP-AdSV and SqW-AdSV, respectively. This method has been successfully applied to analyze chromium in natural water.

Two Novel BODIPY-Functional Magnetite Fluorescent Nano-Sensors for Detecting of Cr(VI) Ions in Aqueous Solutions

In this study, we developed two different very sensitive magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors for the selective detection of Cr(VI) ions. The Cr(VI) metal ions sensing is based on the fluorescent quenching of BODIPY functionalized with Fe₃O₄@SiO₂-TPED and Fe₃O₄@SiO₂-TMPTA nanoparticles in the ethanol-water environment. Characterization of the newly synthesized fluorescent BODIPY compound was performed on a ¹H and ¹³C-NMR spectrometer. The morphology, chemical and physical properties of the sensing nano-sensors were studied by transmission thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscopy (SEM), FT-IR spectroscopy, and transmission electron microscopy (TEM). UV-visible and fluorescent spectroscopy were used to characterize BODIPY functionalized magnetite fluorescent nano-sensors. Characterization measurements revealed that the mean particle diameter of magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors was 18.5 and 19 nm, respectively. The magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors (0.1 gL^-1 in EtOH/H₂O, v/v (3/7)) showed fluorescence quenching responses towards Cr(VI) ions in the medium at pH:1. The fluorescence quenches of the magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors by Cr(VI) were completed in first 5 and 3 min. Respectively. These features provide potential uses of BODIPY functionalized magnetite fluorescent nano-sensors (Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY) as a new class of non-toxic sensors for environmental applications. Graphical Abstract.

Functionalization of PET Track-Etched Membranes by UV-Induced Graft (co)Polymerization for Detection of Heavy Metal Ions in Water

Nowadays, water quality monitoring is an essential task since environmental contamination and human exposure to heavy metals increased. Sensors that are able to detect ever lower concentrations of heavy metal ions with greater accuracy and speed are needed to effectively monitor water quality and prevent poisoning. This article shows studies of the modification of flexible track-etched membranes as the basis for the sensor with various polymers and their influence on the accuracy of detection of copper, cadmium, and lead ions in water. We report the UV-induced graft (co)polymerization of acrylic acid (AA) and 4-vinylpyridine (4-VPy) on poly(ethylene terephthalate) track-etched membrane (PET TeMs) and use them after platinum layer sputtering in square wave anodic stripping voltammetry (SW-ASV) for detection of Cu²⁺, Cd²⁺, and Pb²⁺. Optimal conditions leading to functionalization of the surface and retention of the pore structure were found. Modified membranes were characterized by SEM, FTIR, X-ray photoelectron spectroscopy (XPS) and colorimetric analysis. The dependence of the modification method on the sensitivity of the sensor was shown. Membrane modified with polyacrylic acid (PET TeMs-g-PAA), poly(4-vinylpyridine) (PET TeMs-g-P4VPy), and their copolymer (PET TeMs-g-P4VPy/PAA) with average grafting yield of 3% have been found to be sensitive to µg/L concentration of copper, lead, and cadmium ions. Limits of detection (LOD) for sensors based on PET TeMs-g-PAA are 2.22, 1.05, and 2.53 µg/L for Cu²⁺, Pb²⁺, and Cd²⁺, respectively. LODs for sensors based on PET TeMs-g-P4VPy are 5.23 µg/L (Cu²⁺), 1.78 µg/L (Pb²⁺), and 3.64 µg/L (Cd²⁺) µg/L. PET TeMs-g-P4VPy/PAA electrodes are found to be sensitive with LODs of 0.74 µg/L(Cu²⁺), 1.13 µg/L (Pb²⁺), and 2.07 µg/L(Cd²⁺). Thus, it was shown that the modification of membranes by copolymers with carboxylic and amino groups leads to more accurate detection of heavy metal ions, associated with the formation of more stable complexes.

Fluorescence-tunable copper nanoclusters and their application in hexavalent chromium sensing

Generally, metal nanoclusters are synthesized using only a single ligand. Thus, the properties and applications of these nanomaterials are limited by the nature of the ligand used. In this study, we have developed a new synthetic strategy to prepare bi-ligand copper nanoclusters (Cu NCs). These bi-ligand Cu NCs are synthesized from copper ions, thiosalicylic acid, and cysteamine by a simple one-pot method, and they exhibit high quantum yields (>18.9%) and good photostability. Most interestingly, the fluorescence intensities and surface properties of the Cu NCs can be tailored by changing the ratio of the two ligands. Consequently, the bi-ligand Cu NCs show great promise as fluorescent probes. Accordingly, the Cu NCs were applied to the inner-filter-effect-based detection of hexavalent chromium in water. A wide linear range of 0.1–1000 μM and a low detection limit (signal-to-noise ratio = 3) of 0.03 μM was obtained. The recoveries for the real sample analysis were between 98.3 and 105.0% and the relative standard deviations were below 4.54%, demonstrating the repeatability and practical utility of this assay.

Generally, metal nanoclusters are synthesized using only a single ligand.

Vortex-assisted liquid–liquid microextraction and indirect spectrophotometric determination of chromium(vi)

A novel, simple, sensitive and selective method for the indirect spectrophotometric determination of Cr(vi) was developed on the basis of vortex-assisted liquid–liquid microextraction of an ion association pair between the I₃^– and cationic dye ABR.

Highly sensitive detection of hexavalent chromium utilizing a sol-gel/carbon nanotube modified electrode

A pyridine-functionalized thin film has been fabricated to selectively preconcentrate Cr(VI) anions for electrochemical detection in the 5-300 μg L-1 range. Glassy carbon electrodes were modified through physical deposition of single-walled carbon nanotubes (SWNTs) on the electrode surface, followed by electrochemical deposition of a sol-gel containing a 2-pyridine functional group. The use of SWNTs has increased sensitivity for Cr(VI) detection in aqueous solutions, providing a detection limit of 0.8 μg L-1.

Fluorescent silver nanoclusters for ultrasensitive determination of chromium(VI) in aqueous solution

In this work, a simple and sensitive Cr(VI) sensor is proposed based on fluorescent polyethyleneimine-stabilized Ag nanoclusters, which allows the determination over a wide concentration range of 0.1 nM-3.0 μM and with a detection limit as low as 0.04 nΜ and a good selectivity. The quenching mechanism was discussed in terms of the absorption and fluorescence spectra, suggesting that Cr(VI) is connected to Ag nanoclusters by hydrogen bond between the oxygen atom at the vertex of tetrahedron structure of Cr(VI) and the amino nitrogen of polyethyleneimine that surrounded Ag nanoclusters and electron transfer from Ag nanoclusters to highly electron-deficient Cr(VI) results in fluorescence quenching. Despite the failure to quench the fluorescence efficiently, Cr(III) can also be measured using the proposed Ag nanoclusters by being oxidized to Cr(VI) in alkaline solution (pH ∼ 9) containing H2O2. Therefore, our approach could be used to detect Cr(VI), Cr(III) and the total chromium level in aqueous solution. In addition, Cr(VI) analysis in real water samples were satisfactory, indicating this method could be practically promising for chromium measurements.

One-step fabrication of high quantum yield sulfur- and nitrogen-doped carbon dots for sensitive and selective detection of Cr(vi)

Easily synthesized high quantum yield sulfur- and nitrogen-doped carbon dots can serve as a very efficient fluorescent sensor for the detection of Cr(vi).

Au-Pd Bimetallic Nanoparticle Electrodes for Direct Electroreduction of Hexavalent Chromium Complexes

This paper reports a simple, low-cost, and effective electrochemical technique for sensing and reducing CrVI based on a Au-Pd bimetallic nanoparticle (BNP)-decorated indium tin oxide (ITO) conducting glass electrode. It was observed that the Au-Pd BNP-decorated ITO electrode could significantly boost the electrochemical reduction of CrVI when compared with either Au nanoparticle- or Pd nanoparticle-decorated ITO electrodes. These BNP-decorated electrodes exhibited a wide linear concentration range of 0.001–100 μM, a very low detection limit (signal-to-noise ratio = 3) of 0.3 nM, and a high sensitivity of 1.701 μA μM–1. From electrochemical impedance spectroscopy, it was revealed that this significant improvement was mainly due to the reduction in the charge-transfer resistance, which leads to faster free exchange of the reaction intermediates. The proposed Au-Pd BNP electrode also demonstrated excellent stability, selectivity, repeatability, and reproducibility.

Selective electrochemical determination of trace level copper using a salicylaldehyde azine/MWCNTs/Nafion modified pyrolytic graphite electrode by the anodic stripping voltammetric method

Schematic illustration of Cu²⁺in solution detection using a SA/MWCNTs/Nafion modified PGE.

Recent advances in electrochemical detection of toxic Cr(vi)

The recent achievements and future directions in electrochemical quantification of toxic hexavalent chromium were outlined.

Poly(neutral red) based hydrogen peroxide biosensor for chromium determination by inhibition measurements

Amperometric hydrogen peroxide enzyme inhibition biosensors based on horseradish peroxidase (HRP) immobilised on electropolymerised neutral red (NR) or directly on the surface of carbon film electrodes (CFE) have been successfully applied to the determination of toxic Cr(III) and Cr(VI). Parameters influencing the performance of the biosensor including the enzyme immobilisation method, the amount of hydrogen peroxide, applied potential and electrolyte pH were optimised. The inhibition of horseradish peroxidase by the chromium species was studied under the optimised conditions. Results from the quantitative analysis of chromium ions are discussed in terms of detection limit, linear range and sensitivity. The HRP kinetic interactions reveal mixed binding of Cr(III) with I50=3.8μM and inhibition binding constant Ki=11.3μM at HRP/PNR/CFE biosensors and uncompetitive binding of Cr(VI) with I50=3.9μM and Ki=0.78μM at HRP/CFE biosensors in the presence of H2O2 substrate. Interferences from other heavy metal ions were studied and the inhibition show very good selectivity towards Cr(III) and Cr(VI).

Phosphinic acid functionalized carbon nanotubes for sensitive and selective sensing of chromium(VI)

Single-walled carbon nanotubes (SWCNTs) have been functionalized with a phosphinic acid derivative 'bis(2,4,4-trimethylpentyl) phosphinic acid' (PA/d). It has been achieved by treating the chlorinated SWCNTs with PA/d at 80°C. Successful functionalization and different nanomaterial properties have been investigated by UV-vis-NIR, FTIR, Raman spectroscopy, AFM and FE-SEM. PA/d conjugated SWCNTs (CNT-PA) are dispersible in some common organic solvents, e.g. CH2Cl2, DMF, CHCl3, and THF. The 'CNT-PA' complex was spin-casted on boron doped silicon wafer. Thus fabricated sensing electrode is demonstrated for sensitive and selective electrochemical sensing of chromium(VI) ions. A linear response is obtained over a wide range of Cr(VI) concentration (0.01-10 ppb). The sensor's sensitivity and the limit of detection are observed to be 35 ± 4 nA/ppb and 0.01 ppb, respectively. The practical utility of the proposed sensor is demonstrated by determining the Cr(VI) concentration in an industrial effluent sample and an underground water sample.

Highly sensitive detection of chromium (III) ions by resonance Rayleigh scattering enhanced by gold nanoparticles

Simple and sensitive determination of chromium (III) ions (Cr(3+)) has potential applications for detecting trace contamination in environment. Here, the assay is based on the enhancement of resonance Rayleigh scattering (RRS) by Cr(3+)-induced aggregation of citrate-capped gold nanoparticles (AuNPs). Transmission electron microscopy (TEM) and UV-vis absorption spectroscopy were employed to characterize the nanostructures and spectroscopic properties of the Cr(3+)-AuNP system. The experiment conditions, such as reaction time, pH value, salt concentration and interfering ions, were investigated. The combination of signal amplification of Cr(3+)-citrate chelation with high sensitivity of RRS technique allow a selective assay of Cr(3+) ions with a detection limit of up to 1.0 pM. The overall assay can be carried out at room temperature within only twenty minutes, making it suitable for high-throughput routine applications in environment and food samples.

Simple fluorescence-based detection of Cr(iii) and Cr(vi) using unmodified gold nanoparticles

A fluorescence-based method for the determination of both Cr(iii) and Cr(vi) using unmodified gold nanoparticles.

Improved Bi Film Wrapped Single Walled Carbon Nanotubes for Ultrasensitive Electrochemical Detection of Trace Cr(VI)

We report here the successful fabrication of an improved Bi film wrapped single walled carbon nanotubes modified glassy carbon electrode (Bi/SWNTs/GCE) as a highly sensitive platform for ultratrace Cr(VI) detection through catalytic adsorptive cathodic stripping voltammetry (AdCSV). The introduction of negatively charged SWNTs extraordinarily decreased the size of Bi particles to nanoscale due to electrostatic interaction which made Bi(III) cations easily attracted onto the surface of SWNTs in good order, leading to higher quality of Bi film deposition. The obtained Bi/SWNTs composite was well characterized with electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), the static water contact angle and the voltammetric measurements. The results demonstrates the improvements in the quality of Bi film deposited on the surface of SWNTs such as faster speed of electron transfer, more uniform and smoother morphology, better hydrophilicity and higher stripping signal. Using diethylene triaminepentaacetic acid (DTPA) as complexing ligand, the fabricated electrode displays a well-defined and highly sensitive peak for the reduction of Cr(III)-DTPA complex at -1.06 V (vs. Ag/AgCl) with a linear concentration range of 0-25 nM and a fairly low detection limit of 0.036 nM. No interference was found in the presence of coexisting ions, and good recoveries were achieved for the analysis of a river sample. In comparison to previous approaches using Bi film modified GCE, the newly designed electrode exhibits better reproducibility and repeatability towards aqueous detection of trace Cr(VI) and appears to be very promising as the basis of a highly sensitive and selective voltammetric procedure for Cr(VI) detection at trace level in real samples.

Sensitive and selective detection of trivalent chromium using Hyper Rayleigh Scattering with 5,5'-dithio-bis-(2-nitrobenzoic acid)-modified gold nanoparticles

Hyper Rayleigh Scattering (HRS) and absorption spectral assays using surface-modified gold nanoparticles (AuNP) have been developed for sensitive and selective detection of trivalent chromium (Cr³⁺) from other metal ions including hexavalent chromium (as Cr₂O₇^2-). Gold nanoparticles of 13 nm, covalently attached with 5,5'-dithio-bis-(2-nitrobenzoic acid) (AuNP-DTNBA), is used as a probe for both the absorption and HRS assays. AuNP-DTNBA is able to detect Cr³⁺ at 20 ppb level at pH 6.0 using absorption spectral change of the AuNP-DTNBA. Visible color change can be observed when mixed with 250 ppb of Cr³⁺, while there is no color change when mixed with 2 ppm level of some of the most common metal ions such as Cr₂O₇^2-, Hg²⁺, Ba²⁺, Fe³⁺, Pb²⁺, Na⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, and Ni²⁺. However, a color change is observed when mixed with Ni²⁺, Zn²⁺, and Cd²⁺ at a concentration higher than 2 ppm. The detection limit for the HRS assay is on a remarkable 25 ppt level, and there is no detectable HRS signal at 2 ppm level for Cr₂O₇^2-, Hg²⁺, Ba²⁺, Fe³⁺, Pb²⁺, Na⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, and Ni²⁺.