Synthesis and application of ionic liquid matrices (ILMs) for effective pathogenic bacteria analysis in matrix assisted laser desorption/ionization (MALDI-MS)

3D printing of cellulose/leaf-like zeolitic imidazolate frameworks (CelloZIF-L) for adsorption of carbon dioxide (CO2) and heavy metal ions

Metal-organic frameworks (MOFs) have advanced several technologies. However, it is difficult to market MOFs without processing them into a commercialized structure, causing an unnecessary delay in the material's use. Herein, three-dimensional (3D) printing of cellulose/leaf-like zeolitic imidazolate frameworks (ZIF-L), denoted as CelloZIF-L, is reported via direct ink writing (DIW, robocasting). Formulating CelloZIF-L into 3D objects can dramatically affect the material's properties and, consequently, its adsorption efficiency. The 3D printing process of CelloZIF-L is simple and can be applied via direct printing into a solution of calcium chloride. The synthesis procedure enables the formation of CelloZIF-L with a ZIF content of 84%. 3D printing enables the integration of macroscopic assembly with microscopic properties, i.e., the formation of the hierarchical structure of CelloZIF-L with different shapes, such as cubes and filaments, with 84% loading of ZIF-L. The materials adsorb carbon dioxide (CO₂) and heavy metals. 3D CelloZIF-L exhibited a CO₂ adsorption capacity of 0.64-1.15 mmol g^-1 at 1 bar (0 °C). The materials showed Cu²⁺ adsorption capacities of 389.8 ± 14-554.8 ± 15 mg g^-1. They displayed selectivities of 86.8%, 6.7%, 2.4%, 0.93%, 0.61%, and 0.19% toward Fe³⁺, Al³⁺, Co²⁺, Cu²⁺, Na⁺, and Ca²⁺, respectively. The simple 3D printing procedure and the high adsorption efficiencies reveal the promising potential of our materials for industrial applications.

Fenton-like Cerium Metal–Organic Frameworks (Ce-MOFs) for Catalytic Oxidation of Olefins, Alcohol, and Dyes Degradation

A metal–organic framework (MOF) of cerium (Ce) ions and 4,4′,4′′-nitrilotribenzoic acid linker was synthesized via a hydrothermal method. Ce-MOF consists of a Lewis acid moiety, i.e. Ce3+ and triphenylamine cores. It showed Fenton-like properties with excellent catalytic oxidation activity for olefins, primary/secondary alcohols, and water pollutants e.g., organic dyes. It displayed high oxidation conversion of cinnamyl alcohol and styrene of 100% and 53%, respectively. It offered good selectivity towards styrene oxide and benzaldehyde (i.e. 75% and 100%, respectively). It was applied for the oxidative degradation of dyes e.g. rhodamine B (RhB), methyl blue (MeB), Congo red (CR), and direct blue (DB) using hydrogen peroxide (H2O2) as an oxidant. It exhibited high efficiency in the oxidative degradation of these water pollutants. The mechanistic study of oxidation involves the formation of radical hydroxyl (•OH) species. This study revealed the possibility of enhancing the oxidative catalytic performance, including oxidative degradation of organic pollutants, by employing advanced oxidation processes (AOPs) using Ce-MOF. The catalyst is recyclable five times without significantly decreasing of the material’s catalytic performance.

Ambient Ionization Mass Spectrometry: Application and Prospective

Mass spectrometry (MS) is a formidable analytical tool for the analysis of non-polar to polar compounds individually and/or from mixtures, providing information on the molecular weights and chemical structures of the analytes. During the last more than one-decade, ambient ionization mass spectrometry (AIMS) has developed quickly, producing a wide range of platforms and proving scientific improvements in a variety of domains, from biological imaging to quick quality control. These methods have made it possible to detect target analytes in real time without sample preparation in an open environment, and they can be connected to any MS system with an atmospheric pressure interface. They also have the ability to analyze explosives, illicit drugs, disease diagnostics, drugs in biological samples, adulterants in food and agricultural products, reaction progress, and environmental monitoring. The development of novel ambient ionization techniques, such as probe electrospray ionization, paper spray ionization, and fiber spray ionization, employed even at picolitre to femtolitre solution levels to provide femtogram to attogram levels of the target analytes. The special characteristic of this ambient ion source, which has been extensively used, is the noninvasive property of PESI of examination of biological real samples. The results in the current review supports the idea that AIMS has emerged as a pioneer in MS-based approaches and that methods will continue to be developed along with improvements to existing ones in the near future.

Ionic Liquid/Deep Eutectic Solvent-Mediated Ni-Based Catalysts and Their Application in Water Splitting Electrocatalysis

Nickel-based electrocatalysts have been widely used to catalyze electrocatalytic water splitting. In order to obtain high-performance nickel-based electrocatalysts, using ionic liquids and deep eutectic solvents mediated their preparation has received increasing attention. Firstly, ionic liquids and deep eutectic solvents can act as media and templates for the preparation of Ni-based nanomaterials with novel structures and excellent catalytic activity. Secondly, ionic liquids and deep eutectic solvents can be employed as reactants to participate the synthesis of catalysts. Their participation not only increase the catalytic performance, but also simplify the reaction system, improve reproducibility, reduce emissions, and achieve atomic economy. On the basis of the work of our group, this review gives a detailed description of the impressive progress made concerning ionic liquids and deep eutectic solvents in the preparation of nickel-based electrocatalysts according to their roles. We also point out the challenges and opportunities in the field.

Single-Stage Extraction and Separation of Co2+ from Ni2+ Using Ionic Liquid of [C4H9NH3][Cyanex 272]

The purpose of this study was to optimize the extraction conditions for separating Co²⁺ from Ni²⁺ using N-butylamine phosphinate ionic liquid of [C₄H₉NH₃][Cyanex 272]. A Box–Behnken design of response surface methodology was used to analyze the effects of the initial pH, extraction time, and extraction temperature on the separation factor of Co²⁺ from sulfuric acid solution containing Ni²⁺. The concentrations of Co²⁺ and Ni²⁺ in an aqueous solution were determined using inductively coupled plasma-optical emission spectrometry. The optimized extraction conditions were as follows: an initial pH of 3.7, an extraction time of 55.8 min, and an extraction temperature of 330.4 K. The separation factor of Co²⁺ from Ni²⁺ under optimized extraction conditions was 66.1, which was very close to the predicted value of 67.2, and the error was 1.7%. The equation for single-stage extraction with high reliability can be used for optimizing the multi-stage extraction process of Co²⁺ from Ni²⁺. The stoichiometry of chemical reaction for ion-exchange extraction was also investigated using the slope method.

Nanobiotechnology as a platform for the diagnosis of COVID-19: a review

A sensitive method for diagnosing coronavirus disease 2019 (COVID-19) is highly required to fight the current and future global health threats due to severe acute respiratory syndrome coronavirus 2 (SARS-CoV 2). However, most of the current methods exhibited high false‐negative rates, resulting in patient misdiagnosis and impeding early treatment. Nanoparticles show promising performance and great potential to serve as a platform for diagnosing viral infection in a short time and with high sensitivity. This review highlighted the potential of nanoparticles as platforms for the diagnosis of COVID-19. Nanoparticles such as gold nanoparticles, magnetic nanoparticles, and graphene (G) were applied to detect SARS-CoV 2. They have been used for molecular-based diagnosis methods and serological methods. Nanoparticles improved specificity and shorten the time required for the diagnosis. They may be implemented into small devices that facilitate the self-diagnosis at home or in places such as airports and shops. Nanoparticles-based methods can be used for the analysis of virus-contaminated samples from a patient, surface, and air. The advantages and challenges were discussed to introduce useful information for designing a sensitive, fast, and low-cost diagnostic method. This review aims to present a helpful survey for the lesson learned from handling this outbreak to prepare ourself for future  pandemic.

Ionic Liquid-Assisted Laser Desorption/Ionization-Mass Spectrometry: Matrices, Microextraction, and Separation

Ionic liquids (ILs) have advanced a variety of applications, including matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS). ILs can be used as matrices and solvents for analyte extraction and separation prior to analysis using laser desorption/ionization-mass spectrometry (LDI-MS). Most ILs show high stability with negligible sublimation under vacuum, provide high ionization efficiency, can be used for qualitative and quantitative analyses with and without internal standards, show high reproducibility, form homogenous spots during sampling, and offer high solvation efficiency for a wide range of analytes. Ionic liquids can be used as solvents and pseudo-stationary phases for extraction and separation of a wide range of analytes, including proteins, peptides, lipids, carbohydrates, pathogenic bacteria, and small molecules. This review article summarizes the recent advances of ILs applications using MALDI-MS. The applications of ILs as matrices, solvents, and pseudo-stationary phases, are also reviewed.

Novel ionic liquid matrices for qualitative and quantitative detection of carbohydrates by matrix assisted laser desorption/ionization mass spectrometry

Analysis of carbohydrates based on matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is still challenging and researchers have been devoting themselves to efficient matrices discovery. In the present study, the design, synthesis, qualitative and quantitative performance of non-derivative ionic liquid matrices (ILMs) were reported. DHB/N-methylaniline (N-MA) and DHB/N-ethylaniline (N-EA), performing best for carbohydrate detection, have been screened out. The limit of detection for oligosaccharide provided by DHB/N-MA and DHB/N-EA were as low as 10 fmol. DHB/N-MA and DHB/N-EA showed significantly higher ion generation efficiency than DHB. The comparison of capacity to probe polysaccharide between these two ILMs and DHB also revealed their powerful potential. Their outstanding performance were probably due to lower proton affinities and stronger UV absorption at λ = 355 nm. What is more, taking DHB/N-MA as an example, quantitative analysis of fructo-oligosaccharide mixtures extracted and identified from rice noodles has been accomplished sensitively using an internal standard method. Overall, DHB/N-MA and DHB/N-EA exhibited excellent performance and might be significant sources as the carbohydrate matrices.

Differentiation between Staphylococcus aureus and Staphylococcus epidermidis strains using Raman spectroscopy

AIM

Raman spectroscopy is an analytical method with a broad range of applications across multiple scientific fields. We report on a possibility to differentiate between two important Gram-positive species commonly found in clinical material - Staphylococcus aureus and Staphylococcus epidermidis - using this rapid noninvasive technique.

MATERIALS & METHODS

For this, we tested 87 strains, 41 of S. aureus and 46 of S. epidermidis, directly from colonies grown on a Mueller-Hinton agar plate using Raman spectroscopy.

DISCUSSION & CONCLUSION

The method paves a way for separation of these two species even on high number of samples and therefore, it can be potentially used in clinical diagnostics.

A cool and high salt-tolerant ionic liquid matrix for preferential ionization of phosphopeptides by negative ion MALDI-MS

An optimized ILM G₃THAP/PA matrix significantly improved the detection of phosphopeptides by negative ion MALDI-MS compared with using 3-AQ/CHCA/ADP and DHB/PA matrices.

Quantification analysis of protein and mycelium contents upon inhibition of melanin for Aspergillus niger: a study of matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS)

Mass spectrometry (MS) provides a simple discrimination method for microorganisms.

Magnetic nanoparticle modified chitosan for surface enhanced laser desorption/ionization mass spectrometry of surfactants

Chitosan (CTS) modified magnetic nanoparticles (CTS@Fe₃O₄MNPs) offer dual functions for the detection of surfactants using surface enhanced laser desorption/ionization mass spectrometry (SELDI-MS).

Ionic liquids in bioanalysis

Ionic liquids (ILs) are entirely composed of ions and they possess fascinating properties, including low volatility, tunable viscosity, miscibility and electrolytic conductivity, which make them promising alternatives to traditional organic solvents used in sample preparation. The recent surge in the number of publications clearly indicates an increasing interest of the analytical and bioanalytical community toward these exciting and unique solvents. This article highlights the recent advances in the use of ILs as extraction solvents, as materials for separation and preconcentration in chromatographic techniques, and as matrices in mass spectrometric techniques for bioassays in biocomplex samples. We also briefly discuss the potential applications of ILs in biocatalysis.

Synthesis of a highly dispersive sinapinic acid@graphene oxide (SA@GO) and its applications as a novel surface assisted laser desorption/ionization mass spectrometry for proteomics and pathogenic bacteria biosensing

GO-modified sinapinic acid was synthesized and characterized; it was then investigated for use in SALDI-MS for proteomics and pathogenic bacterial biosensing.

Synthesis, characterization and bifunctional applications of bidentate silver nanoparticle assisted single drop microextraction as a highly sensitive preconcentrating probe for protein analysis

Synthesis, characterization and bifunctional applications of silver nanoparticles with two different surface capping reagents are reported.

Advanced mass spectrometry technologies for the study of microbial pathogenesis

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) has been successfully applied to the field of microbial pathogenesis with promising results, principally in diagnostic microbiology to rapidly identify bacteria based on the molecular profiles of small cell populations. Direct profiling of molecules from serum and tissue samples by MALDI MS provides a means to study the pathogen-host interaction and to discover potential markers of infection. Systematic molecular profiling across tissue sections represents a new imaging modality, enabling regiospecific molecular measurements to be made in situ, in both two-dimensional and three-dimensional analyses. Herein, we briefly summarize work that employs MALDI MS to study the pathogenesis of microbial infection.

Ultrasensitive, rapid, and selective detection of mercury using graphene assisted laser desorption/ionization mass spectrometry

We report an extremely sensitive and specific detection of mercuric ions (Hg²⁺) based on graphene assisted laser desorption/ionization mass spectrometry (GALDI-MS). Combining the highly selective coordination interactions between thymine (T) and Hg²⁺, we present a simple, effective, and novel approach, based on π-π interactions of the T-Hg²⁺-T complex and G that can serve as a platform and matrix for GALDI-MS. The present sensor not only exhibits high selectivity and sensitivity (picomolar) to Hg²⁺ in aqueous solution, but also can elucidate the chemical structures of the metal complexes. The significant advantage in the current approach is that there is no need for a sophisticated instrument, and no sample pretreatment is required to detect the Hg²⁺ ions.

ZnO nanoparticle-modified polymethyl methacrylate-assisted dispersive liquid–liquid microextraction coupled with MALDI-MS for rapid pathogenic bacteria analysis

A new, fast nano-based approach to extract pathogenic bacteria lysates from aqueous samples is reported.

Rapid and direct MALDI-MS identification of pathogenic bacteria from blood using ionic liquid-modified magnetic nanoparticles (Fe3O4@SiO2)

A novel method for pathogenic bacteria identification directly from blood samples using cationic ionic liquid-modified magnetic nanoparticles (CILMS) is reported.

Ceria nanocubic-ultrasonication assisted dispersive liquid-liquid microextraction coupled with matrix assisted laser desorption/ionization mass spectrometry for pathogenic bacteria analysis

A new ceria (CeO2) nanocubic modified surfactant is used as the basis of a novel nano-based microextraction technique for highly sensitive detection of pathogenic bacteria (Pseudomonas aeruginosa and Staphylococcus aureus). The technique uses ultrasound enhanced surfactant-assisted dispersive liquid-liquid microextraction (UESA-DLLME) with and without ceria (CeO2) followed by matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS). In order to achieve high separation efficiency, we investigated the influential parameters, including extraction time of ultrasonication, type and volume of the extraction solvent and surfactant. Among various surfactants, the cationic surfactants can selectively offer better extraction efficiency on bacteria analysis than that of the anionic surfactants due to the negative charges of bacteria cell membranes. Extractions of the bacteria lysate from aqueous samples via UESA-DLLME-MALDI-MS were successfully achieved by using cetyltrimethyl ammonium bromide (CTAB, 10.0 µL, 1.0×10(-3) M) as surfactants in chlorobenzene (10.0 µL) and chloroform (10.0 µL) as the optimal extracting solvent for P. aeruginosa and S. aureus, respectively. Ceria nanocubic was synthesized, and functionalized with CTAB (CeO2@CTAB) and then characterized using transmission electron microscopy (TEM) and optical spectroscopy (UV and FTIR). CeO2@CTAB demonstrates high extraction efficiency, improve peaks ionization, and enhance resolution. The prime reasons for these improvements are due to the large surface area of nanoparticles, and its absorption that coincides with the wavelength of MALDI laser (337 nm, N2 laser). CeO2@CTAB-based microextraction offers lowest detectable concentrations tenfold lower than that of without nanoceria. The present approach has been successfully applied to detect pathogenic bacteria at low concentrations of 10(4)-10(5) cfu/mL (without ceria) and at 10(3)-10(4) cfu/mL (with ceria) from bacteria suspensions. Finally, the current approach was applied for analyzing the pathogenic bacteria in biological samples (blood and serum). Ceria assist surfactant (CeO2@CTAB) liquid-liquid microextraction (LLME) offers better extraction efficiency than that of using the surfactant in LLME alone.

Probing the interactions of chitosan capped CdS quantum dots with pathogenic bacteria and their biosensing application

Chitosan modified CdS quantum dots (CdS@CTS) can be used as an effective bacterial biosensor due to their good bioaffinity among chitosan molecules and bacterial membranes. CdS@CTS is an ultrafast, sensitive, direct and biocompatible biosensor for pathogenic bacteria (Pseudomonas aeruginosa and Staphylococcus aureus). Chitosan biopolymer of CdS@CTS provides bioaffinity sites that can be employed for the assembly on pathogen bacteria cells due to the chemical similarity of the chitosan and the bacteria membranes. Thus, S. aureus and P. aeruginosa cells were detected at low concentrations of 150 and 200 cfu mL^-1, respectively, in an extremely short time (1 min). The CdS@CTS-bacteria interaction is noncovalent. From the thermodynamic results, the van der Waals force and hydrogen bonding formation are characterized by negative enthalpy (ΔH), while positive entropy (ΔS) is considered as the evidence for typical hydrophobic interactions. Moreover, negative ΔH and positive ΔS might play a role in the electrostatic interactions. The negative free energy (ΔG) shows that the binding events were spontaneous processes. Matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) and transmission electron microscopy (TEM) were performed to evaluate the interactions and the biocompatibility of CdS@CTS toward bacteria cells. Their biocompatibility, together with the high sensitivity and the presence of multifunctional forces, making these quantum dots (CdS@CTS) an excellent and novel biosensor which can be widely applied in the near future.

Furoic and mefenamic acids as new matrices for matrix assisted laser desorption/ionization-(MALDI)-mass spectrometry

The present study introduces two novel organic matrices for matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) for the analysis of small molecules. The first matrix is "2-amino-4,5-diphenylfuran-3-carboxylic acid" (also called furoic acid, FA) which was synthesized and then characterized by ultraviolet (UV), infrared (FTIR), nuclear magnetic resonance NMR ((1)H and (13)C) and mass spectrometry. The compound has organic semiconductor properties and exhibits intense UV-absorption which is suitable for the UV-MALDI laser (N2 laser, 337 nm). The second matrix is mefenamic acid (MA). The two matrices can be successfully applied for various classes of compounds including adenosine-5'-triphosphate (ATP, 0.5 µL(10.0 nmol)), spectinomycin (spect, 0.5 µL(14.0 nmol)), glutathione (GSH, 0.5 µL(9.0 nmol)), sulfamethazole (SMT, 0.5 µL(2.0 nmol)) and mixture of peptides gramicidin D (GD, 0.5µL (9.0 nmol)). The two matrices can effectively absorb the laser energy, resulting in excellent desorption/ionization of small molecules. The new matrices offer a significant enhancement of ionization, less fragmentation, few interferences, nice reproducibility, and excellent stability under vacuum. Theoretical calculations of the physical parameters demonstrated increase in polarizability, molar volume and refractivity than the conventional organic matrices which can effectively enhance the proton transfer reactions between the matrices with the analyte molecules. While the reduction in density, surface tension and index of refraction can enhance homogeneity between the two new matrices with the analytes. Due to the sublimation energy of mefenamic acid is (1.2 times) higher than that of the DHB, it is more stable to be used in the vacuum.