Aptamer based strategy for cytosensing and evaluation of HER-3 on the surface of MCF-7 cells by using the signal amplification of nucleic acid-functionalized nanocrystals

Graphene-based materials: A new tool to fight against breast cancer

Breast cancer is one of the most common malignant tumors among women population on a global scale, with a huge number of new cases and deaths each year. In recent years, there has been an increasing number of literatures on the discovery and development of novel anti-breast cancer drugs and materials, aiming to increase the survival rate of breast cancer patients. One of the newest tools used for the therapy of breast cancer is graphene-based materials, which have ultra-high surface area as well as unique physical, chemical and mechanical properties. It is reported that graphene-based materials could induce apoptosis in cancer cells while showing low toxicity due to their carbon structure. Therefore, they can be used as nano-drugs or biological carriers to introduce small molecules such as nucleic acids, drugs, or photosensitizers into the human body to achieve treatment goals. This article introduces the synthetic methods for graphene-based materials, as well as the current status and the future prospects of graphene-based materials' application in the treatment of breast cancer.

Aptamer based recognition of cancer cells: Recent progress and challenges in bioanalysis

Rapid and accurate monitoring of cancer cells with high sensitivity is essential for a successful cancer treatment. As high-affinity nucleic acid ligands, aptamers can improve the properties of detection methods by conjugating with intracellular or extracellular cancer biomarkers. Despite the advances in the early detection and treatment of cancer cells, lacking effective early detection tools is one of the causes of a high mortality rate. Aptasensors, which are based on the specificity of aptamer-target recognition, with transduction for analytical purposes have received particular attention due to their high sensitivity and selectivity, simple instrumentation, as well as low production cost. In this review, some selective and sensitive methods were summarized based on advanced nanomaterials towards aptasensing of cancer cells, such as blood, breast, cervical, colon, gastric, liver, and lung cancer cells. This review summarizes advances from 2010 to June 2020 in the development of aptasensors for cancer cell detection. Various aptasensing strategies are assessed according to their potential for reaching relevant limits of sensitivity, specificity, and degrees of multiplexing. Furthermore, we address the remaining challenges and opportunities to integrate aptasensing platforms into point-of-care solutions. Finally, the advantages and limitations of aptamer-based aptasensing strategies were reviewed.

Application of electrochemical biosensors in tumor cell detection

Conventional methods for detecting tumors, such as immunological methods and histopathological diagnostic techniques, often request high analytical costs, complex operation, long turnaround time, experienced personnel and high false-positive rates. In addition, these assays are difficult to obtain an early diagnosis and prognosis quickly for malignant tumors. Compared with traditional technology, electrochemical technology has realized the study of interface charge transfer behavior at the atomic and molecular levels, which has become an important analytical and detection tool in contemporary analytical science. Electrochemical technique has the advantages of rapid detection, high sensitivity (single cell) and specificity in the detection of tumor cells, which has not only been successful in differentiating tumor cells from normal cells, but has also achieved targeted detection of localized tumor cells and circulating tumor cells. Electrochemical biosensors provide powerful tools for early diagnosis, staging and prognosis of tumors in clinical medicine. Therefore, this review mainly discusses the development and application of electrochemical biosensors in tumor cell detection in recent years.

Electrochemical cytosensors for detection of breast cancer cells

Breast cancer is one of lethal cancers among women with its metastasis leading to cancer-related morbidity and mortality. Circulating tumor cells (CTCs) derived from a primary tumor can be detected in the venous blood of cancer patients. Monitoring CTCs in blood samples has increased exponentially over the past decades and holds great promise in the diagnosis and treatment of metastatic breast cancer. Electrochemical cytosensors, classified as a class of electrochemical biosensors for sensitive detection and enumeration of targeted cells with minimally invasive methods, have the advantages of electrochemical biosensors, such as simplicity, low cost, and low limit of detection. Here, we review recent progress in the detection of CTCs from breast cancer with a focus on electrochemical cytosensors. This review describes platforms benefiting from these cytosensors to identify cancerous breast cells. Furthermore, strategies for signal amplification and also generation of reusable electrochemical cytosensors are introduced. In addition, breast cancer markers and biorecognition elements for cell capturing are reviewed.

A novel MUC1 aptamer-modified PLGA-epirubicin-PβAE-antimir-21 nanocomplex platform for targeted co-delivery of anticancer agents in vitro and in vivo

Conventional chemotherapy suffers from several drawbacks, including toxic side effects together with the development of resistance to the chemical agents. Therefore, exploring alternative therapeutic approaches as well as developing targeted delivery systems are in demand. Oligonucleotide-based therapy has emerged as a promising and alternative procedure for treating malignancies involving gene-related diseases. In the current study, a targeted delivery system was designed to target cancer cells based on two biocompatible polymers of poly (β amino ester) (PβAE) and poly (d, l-lactide-co-glycolide) (PLGA). In this system, antimir-21 as an inhibitor of microRNA-21 (miR-21) which is an oncomiR overexpressed in several human cancers was condensed with PβAE polymer and then PLGA was electrostatically deposited on this complex and provided a reservoir for positively charged drug, epirubicin (Epi). At the final stage, MUC1 aptamer as a targeting agent was covalently attached to the nanoparticles for selectively guided therapeutic delivery. The obtained results demonstrated that the fabricated MUC1 aptamer-modified nanocomplex could efficiently be internalized into MCF7 (human breast carcinoma cell) and C26 (murine colon carcinoma cell) cells through interaction between MUC1 aptamer and its receptor on the surfaces of these cell lines and decline cell viability in these cells but not in CHO cells (Chinese hamster ovary cell) as nontarget cells (MUC1 negative cells). The safety of PLGA-Epi-PβAE-antimir-21 nanocomplex and synergetic effect of Epi and antimir-21 in reducing cell viability of target cells were confirmed by treating MCF-7 and CHO cells with nanocomplex and MUC1 aptamer-modified nanocomplex. Moreover, it was demonstrated that MUC1 aptamer-modified nanocomplex could remarkably inhibit tumor growth in tumor-bearing mice compared with Epi alone.

Label-free cytosensing of cancer cells based on the interaction between protein and an electron-transfer carbohydrate-mimetic peptide

We used an electron-transfer carbohydrate-mimetic peptide (YYYYC) to construct an electrochemical cytosensing system. Magnetic beads were modified with either asialofetuin (ASF) or soybean agglutinin (SBA) to evaluate the effect on cell sensing. Because SBA binds to the galactose residue that exists at the terminals of the carbohydrate chains in ASF, the target protein was accumulated on the protein magnetic beads. SBA is an example of N-acetylgalactosamine- and galactose-binding proteins that readily combine with YYYYC. When the peptides and protein-immobilized beads competed for a target protein, the peak current of the peptides changed according to the concentration of the protein at the 10^-12 M level. Next, human myeloid leukemia cells (K562 cell) were measured using the peptide and the carbohydrate chains on the cell surface that recognize SBA. The electrode response was linear to the number of K562 cells and ranged from 1.0 × 10² to 5.0 × 10³ cells mL^-1. In addition, detection of a human liver cancer cell (HepG2 cell) was carried out using interactions with the peptide, the ASF receptors in HepG2 cells, and the carbohydrate chains of ASF. The peak currents were proportional and ranged between 5.0 × 10¹ and 1.5 × 10³ cells mL^-1. When the values estimated from an electrochemical process were compared with those obtained by ELISA, the results were within the acceptable range of measurement error.

Aptamer-Based Dual-Functional Probe for Rapid and Specific Counting and Imaging of MCF-7 Cells

Development of multimodal detection technologies for accurate diagnosis of cancer at early stages is in great demand. In this work, we report a novel approach using an aptamer-based dual-functional probe for rapid, sensitive, and specific counting and visualization of MCF-7 cells by inductively coupled plasma-mass spectrometry (ICP-MS) and fluorescence imaging. The probe consists of a recognition unit of aptamer to catch cancer cells specifically, a fluorescent dye (FAM) moiety for fluorescence resonance energy transfer (FRET)-based "off-on" fluorescence imaging as well as gold nanoparticles (Au NPs) tag for both ICP-MS quantification and fluorescence quenching. Due to the signal amplification effect and low spectral interference of Au NPs in ICP-MS, an excellent linearity and sensitivity were achieved. Accordingly, a limit of detection of 81 MCF-7 cells and a relative standard deviation of 5.6% (800 cells, n = 7) were obtained. The dynamic linear range was 2 × 10² to 1.2 × 10⁴ cells, and the recoveries in human whole blood were in the range of 98-110%. Overall, the established method provides quantitative and visualized information on MCF-7 cells with a simple and rapid process and paves the way for a promising strategy for biomedical research and clinical diagnostics.

A new chemotherapy agent-free theranostic system composed of graphene oxide nano-complex and aptamers for treatment of cancer cells

The common cancer treatment strategies like chemotherapy and radiotherapy are nonspecific and can trigger severe side effects by damaging normal cells. So, targeted cancer therapies, such as apoptosis induction, have attracted great attention in recent years. In this project, two nano-complexes, MUC1 aptamer-NAS-24 aptamer-Graphene oxide (GO) and MUC1 aptamer-Cytochrome C aptamer-GO, were designed to induce cell programmed death in MDA-MB-231 and MCF-7 cells (breast cancer cell lines) and to verify the level of apoptosis in both cell lines. MUC1 aptamer was a molecular recognition probe that led the internalization of two nano-complexes into MDA-MB-231 and MCF-7 cells (MUC1 positive cells) but not into HepG2 cell (liver cancer cell line, MUC1 negative cells). The apoptosis induction relied on binding of NAS-24 aptamer to its target, vimentin, in MDA-MB-231 and MCF-7 (target cells) with different levels of vimentin content. The function of first nano-complex was confirmed by binding of FAM-labeled cytochrome C aptamer to its target (cytochrome C) which was released from mitochondria, based on the function of the first nano-complex. Fluorometric analysis and gel retardation assay proved the formation of nano-complexes. The results of flow cytometry and fluorescence microscopy indicated efficient apoptosis induction just in target cells (MDA-MB-231 and MCF-7 cells) but not in non-target cells (HepG2 cell). The results of MTT assay also confirmed cell death process. Overall, our results proved excellent targeted apoptosis in breast cancer cells by designed nano-complexes which can be applied as an efficient cancer therapy method.

Dual Electrochemiluminescence Signal System for In Situ and Simultaneous Evaluation of Multiple Cell-Surface Receptors

A mutiplex cytosensor based on a dual electrochemiluminescence (ECL) signal system was fabricated for in situ and simultaneous detection of the expression levels of multiple cell-surface receptors, mannose and epidermal growth factor receptor (EGFR), using luminol-capped gold nanoparticles (Au@luminol) and CdS quantum dots (CdS QDs) as potential-resolved ECL nanoprobes. Two spatially resolved areas on indium tin oxide (ITO) electrodes were modified with polyaniline (PANI) by electropolymerization, on which gold nanoparticles (AuNPs) were attached to strengthen conductivity and stability of the sensing interface. Human mucin1 protein (MUC1) aptamer was immobilized onto AuNPs for capturing MUC1-positive MCF-7 cells. Au@luminol and CdS QDs as ECL nanoprobes were covalently linked with concanavalin A (ConA) and epidermal growth factor (EGF) to label MCF-7 cells on the two areas of the cytosensor separately. Compared to conventional multiplex biosensor, we demonstrated a novel analysis platform for the simultaneous detection of multiple cell-surface receptors; it could provide two sensitive and potential-resolved ECL signals during one potential scanning and avoid cross-reactivity between the two nanoprobes. The quantification of MCF-7 cells on the two spatially resolved areas could be achieved over the linear range from 10² to 1.0 × 10⁶ cells mL^-1 with a detection limit of 20 cells mL^-1. This multiplex cytosensor was further applied for simultaneous quantitative evaluation of the expression levels of mannose and EGFR on MCF-7 cells, revealed that the average numbers of mannose and EGFR per captured MCF-7 cell were 1.2 × 10⁶ and 0.86 × 10⁵ with the relative standard deviation of 5.3% and 4.2%, respectively. The multiplex cytosensor was capable of evaluating multiple cell-surface receptors, which would be beneficial to developing a better diagnostic tool for diseases.