Trace analysis of uranyl ion (UO22+) in aqueous solution by fluorescence turn-on detection via aggregation induced emission enhancement effect

Fluorescent Eu-MOF@nanocellulose-based nanopaper for rapid and sensitive detection of uranium (Ⅵ)

Radioactive uranium leaks into natural water bodies mainly in the form of uranyl ions (UO22+), posing ecological and human health risks. Fluorescent europium-based metal-organic frameworks (Eu-MOFs) have been demonstrated to be effective fluorescent sensors for UO22+, but the large size, powder state and poor dispersity limit their further application. In this work, fluorescent Eu-MOFs were in-situ grown on TEMPO-oxidized cellulose nanofibers (TOCNFs), which is the first time that spherical Eu-MOF crystals with sizes below 10 nm were prepared. Fluorescence spectral analysis revealed a nine-fold increase in the fluorescence intensity of TOCNF@Eu-MOF compared to Eu-MOF. The nanocomposites achieved rapid and sensitive fluorescence quenching to UO22+ through the "antenna effect" and unsaturated Lewis basic sites on the ligands binding with UO22+. Moreover, TOCNF@Eu-MOF demonstrated excellent selectivity and anti-interference for UO22+ detection. For the nanopaper-based sensor made from TOCNF@Eu-MOF, the Stern-Volmer quenching constant (KSV) was calculated as 8.21 × 104 M-1, and the lowest limit of detection (LOD) was 6.6 × 10-7 M, significantly lower than the 1.32 × 10-6 M of Eu-MOFs. In addition, the nanopaper exhibited good fluorescence stability and cyclic detection performance, enabling the rapid and convenient detection of UO22+ in the aqueous phase within 30 s by simple dipping.

Electrochemical sensor based on amine- and thiol-modified multi-walled carbon nanotubes for sensitive and selective determination of uranyl ions in real water samples

Novel selective and sensitive electrochemical sensors based on the modification of a carbon paste electrode (CPE) with novel amine- and thiol-functionalized multi-walled carbon nanotubes (MWCNT) have been developed for the detection and monitoring of uranyl ions in different real water samples. Multiwalled carbon nanotubes were grafted with 2-aminothiazole (AT/MWCNT) and melamine thiourea (MT/MWCNT) via an amidation reaction in the presence of dicyclohexyl carbodiimide (DCC) as a coupling agent. This modification for multiwalled carbon nanotubes has never been reported before. The amine and thiol groups were considered to be promising functional groups due to their high affinity toward coordination with uranyl ions. The modified multi-walled carbon nanotubes were characterized using different analytical techniques including FTIR, SEM, XPS, and elemental analysis. Subsequently, 10 wt% MT/MWCNT was mixed with 60 wt% graphite powder in the presence of 30 wt% paraffin oil to obtain a modified carbon paste electrode (MT/MWCNT/CPE). The electrochemical behavior and applications of the prepared sensors were examined using cyclic voltammetry, differential pulse anodic stripping voltammetry, and electrochemical impedance spectroscopy. The MT/MWCNT/CPE sensor exhibited a good linearity for UO22+ in the concentration range of 5.0 × 10-3 to 1.0 × 10-10 mol L-1 with low limits of detection (LOD = 2.1 × 10-11 mol L-1) and quantification (LOQ = 7 × 10-11 mol L-1). In addition, high precision (RSD = 2.7%), good reproducibility (RSD = 2.1%), and high stability (six weeks) were displayed. Finally, MT-MWCNT@CPE was successfully utilized to measure the uranyl ions in an actual water sample with excellent recoveries (97.8-99.3%). These results demonstrate that MT-MWCNT@CPE possesses appropriate accuracy and is appropriate for environmental applications.

Aggregation enhanced FRET: A simple but efficient strategy for the ratiometric detection of uranyl ion

Uranium is one of the most important radionuclides but could also cause potential health risks to human beings due to its radioactive and chemical toxicity. It is an urgent task to develop a simple but efficient sensing platform for UO₂²⁺, the main existing form of uranium in environment. Herein, a rhodamine-functionalized carbon dots (o-CDs-Rho) was synthesized and applied for UO₂²⁺ sensing through a simple but novel aggregation-enhanced FRET strategy. The weak FRET efficiency (16.2%) of o-CDs-Rho in dispersed solution is significantly enhanced (>77.2%) after UO₂²⁺ triggered aggregation due to the increased number of rhodamine acceptors around each CDs from dispersed 80 to aggregated 2800. This is the first ratiometric fluorescence sensor with an inverse change of fluorescence intensity at dual emission wavelengths under single-wavelength excitation for UO₂²⁺. Under optimized experiment conditions, o-CDs-Rho nanosensor shows a low detection limit of 53 nM and excellent selectivity. Meanwhile, the as-prepared nanosensor also shows high reliability and stability. These excellent properties make it successful in detecting uranium content in real samples.

Simultaneous detection and separation of uranium based on a fluorescent amidoxime-functionalized covalent organic polymer

To ensure the long-term sustainable development of nuclear energy as well as the prevention and control of uranium pollution, new materials that can simultaneously detect and separate uranium are still urgently needed. Herein, a new fluorescent covalent organic polymer (COP), namely HT-COP-AO, was synthesized andemployed as both the fluorescent probe and absorbent for simultaneous uranium detection and separationconsidering its excellent fluorescence property and strong uranium coordination ability. The results showed that the fluorescence of HT-COP-AO was quickly quenched by uranium within 2 min, and the limit of detection was 0.23 µM (3σ/K). Further studies implied that uranium was coordinated with the amidoxime groups of HT-COP-AO through U-N and O = U = O bonds, which resulted in electron transfer from uranium to HT-COP-AO and quenching the fluorescence of HT-COP-AO consequently. Meanwhile, HT-COP-AO exhibited excellent absorption ability towards uranium, and the maximum absorption capacity (q_max = 401.3 mg/g) was higher than most reported amidoxime modified materials. The HT-COP-AO also showed high selectivity for both uranium detection and separation which makes it a great promising for uranium monitoring in real water samples.

A Novel Triphenylamine-Based Flavonoid Fluorescent Probe with High Selectivity for Uranyl in Acid and High Water Systems

Developing a fluorescent probe for UO₂²⁺, which is resistant to interference from other ions such as Cu²⁺ and can be applied in acidic and high-water systems, has been a major challenge. In this study, a "turn-off" fluorescent probe for triamine-modified flavonoid derivatives, 2-triphenylamine-3-hydroxy-4H-chromen-4-one (abbreviated to HTPAF), was synthesized. In the solvent system of dimethyl sulfoxide:H₂O (abbreviated to DMSO:H₂O) (v/v = 5:95 pH = 4.5), the HTPAF solution was excited with 364 nm light and showed a strong fluorescence emission peak at 474 nm with a Stokes shift of 110 nm. After the addition of UO₂²⁺, the fluorescence at 474 nm was quenched. More importantly, there was no interference in the presence of metal ions (Pb²⁺, Cd²⁺, Cr³⁺, Fe³⁺, Co²⁺, Th⁴⁺, La³⁺, etc.), especially Cu²⁺ and Al³⁺. It is worth noting that the theoretical model for the binding of UO₂²⁺ to HTPAF was derived by more detailed density functional theory (DFT) calculations in this study, while the coordination mode was further verified using HRMS, FT-IR and ¹HNMR, demonstrating a coordination ratio of 1:2. In addition, the corresponding photo-induced electron transfer (PET) fluorescence quenching mechanism was also proposed.

Synthesis of Metal–Organic Frameworks Quantum Dots Composites as Sensors for Endocrine-Disrupting Chemicals

Hazardous chemical compounds such as endocrine-disrupting chemicals (EDCs) are widespread and part of the materials we use daily. Among these compounds, bisphenol A (BPA) is the most common endocrine-disrupting chemical and is prevalent due to the chemical raw materials used to manufacture thermoplastic polymers, rigid foams, and industrial coatings. General exposure to endocrine-disrupting chemicals constitutes a serious health hazard, especially to reproductive systems, and can lead to transgenerational diseases in adults due to exposure to these chemicals over several years. Thus, it is necessary to develop sensors for early detection of endocrine-disrupting chemicals. In recent years, the use of metal–organic frameworks (MOFs) as sensors for EDCs has been explored due to their distinctive characteristics, such as wide surface area, outstanding chemical fastness, structural tuneability, gas storage, molecular separation, proton conductivity, and catalyst activity, among others which can be modified to sense hazardous environmental pollutants such as EDCs. In order to improve the versatility of MOFs as sensors, semiconductor quantum dots have been introduced into the MOF pores to form metal–organic frameworks/quantum dots composites. These composites possess a large optical absorption coefficient, low toxicity, direct bandgap, formidable sensing capacity, high resistance to change under light and tunable visual qualities by varying the size and compositions, which make them useful for applications as sensors for probing of dangerous and risky environmental contaminants such as EDCs and more. In this review, we explore various synthetic strategies of (MOFs), quantum dots (QDs), and metal–organic framework quantum dots composites (MOFs@QDs) as efficient compounds for the sensing of ecological pollutants, contaminants, and toxicants such as EDCs. We also summarize various compounds or materials used in the detection of BPA as well as the sensing ability and capability of MOFs, QDs, and MOFs@QDs composites that can be used as sensors for EDCs and BPA.

A Novel Electrochemical Sensor Modified with a Computer-Simulative Magnetic Ion-Imprinted Membrane for Identification of Uranyl Ion

In this paper, a novel ion-imprinted electrochemical sensor modified with magnetic nanomaterial Fe₃O₄@SiO₂ was established for the high sensitivity and selectivity determination of UO₂²⁺ in the environment. Density functional theory (DFT) was employed to investigate the interaction between templates and binding ligands to screen out suitable functional binding ligand for the reasonable design of the ion imprinted sensors. The MIIP/MCPE (magnetic ion imprinted membrane/magnetic carbon paste electrode) modified with Fe₃O₄@SiO₂ exhibited a strong response current and high sensitivity toward uranyl ion comparison with the bare carbon paste electrodes. Meanwhile, the MCPE was fabricated simultaneously under the action of strong magnetic adsorption, and the ion imprinted membrane can be adsorbed stably on the electrode surface, handling the problem that the imprinted membrane was easy to fall off during the process of experimental determination and elution. Based on the uranyl ion imprinting network, differential pulse voltammetry (DPV) was adopted for the detection technology to realize the electrochemical reduction of uranyl ions, which improved the selectivity of the sensor. Thereafter, uranyl ions were detected in the linear concentration range of 1.0 × 10⁻⁹ mol L⁻¹ to 2.0 × 10⁻⁷ mol L⁻¹, with the detection and quantification limit of 1.08 × 10⁻⁹ and 3.23 × 10⁻¹⁰ mol L⁻¹, respectively. In addition, the sensor was successfully demonstrated for the determination of uranyl ions in uranium tailings soil samples and water samples with a recovery of 95% to 104%.

Colorimetric detection for uranyl ions in water using vinylphosphonic acid functionalized gold nanoparticles based on smartphone

A simple and portable colorimetric sensor for colorimetric detection of UO₂²⁺ in aqueous solution based on vinylphosphonic acid functionalized gold nanoparticles (VPA-AuNPs) has been developed. The VPA-AuNPs solution was prepared by sodium borohydride reduction in the presence of vinylphosphonic acid. The addition of UO₂²⁺ would induce aggregation of VPA-AuNPs, resulting in the color change from wine-red to blue, and red-shift of the ultraviolet-visible (UV-vis) spectra. The UO₂²⁺ assay based on VPA-AuNPs showed good selectivity and sensitivity, with a limit of detection to be approximately 2.0 μM by naked eyes and 1.07 μM by UV-vis (S/N = 3) respectively. Additionally, a smartphone with a free application named "PhotoMetrix" was employed to estimate the color intensities (red, green, blue value) of VPA-AuNPs in the presence of UO₂²⁺ with different concentrations, and the concentration of UO₂²⁺ samples could be conveniently exported by the calculated univariate calibration curves. This method shows good feasibility for on-site UO₂²⁺ detection in an aqueous solution.

Ultrasensitive and Selective Detection of Uranium by a Luminescent Terbium-Organic Framework

Detection and remediation of radioactive components have become the focus of worldwide research interest due to the ever-increasing generation of nuclear waste and the concerns on nuclear accidents. Among the numerous radionuclides, uranium and its isotopes receive the most attention because of their high proportion in nuclear waste and long half-life. Herein, a highly luminescent terbium-organic framework, formulated as [Tb₄(C₂₉O₈H₁₇)₂(NO₃)₄(DMF)₄(H₂O)₄]·4H₂O·8.5DMF (YTU-100), with exceptional sensitivity and selectivity toward uranium was successfully prepared. The material exhibits fast adsorption kinetics and moderate sorption capacity. Interestingly, the luminescence intensity variation highly correlates to the amount of adsorbed uranium, which results in a quantitative, accurate, and selective uranium detection manner. The detection limits in deionized water and tap water were determined to be 1.07 and 0.75 ppb, respectively, which are lower than the US Environmental Protection Agency standard of the maximum contamination of uranium in drinking water. YTU-100 offers an alternative approach for building multifunctional MOFs used for simultaneous detection and removal of uranium from aqueous solutions.

Temperature-robust and ratiometric G-quadruplex proximate DNAzyme assay for robustly monitoring of uranium pollution and its microbial biosorbents screening

Uranium pollution in environment and food chain is a serious threat to public security and human health. Herein, we proposed a temperature-robust, ratiometric, and label-free bioassay based on G-quadruplex proximate DNAzyme (G4DNAzyme), accommodating us to precisely monitor uranium pollution and biosorption. The proximity of split G-quadruplex probes was proposed to sense UO₂²⁺-activated DNAzyme activity, thus eliminating the use of chemically labeled nucleic acid probes. And the simultaneous monitoring of G-quadruplex and double-stranded structures of DNAzyme probes contributed to a ratiometric and robust detection of UO₂²⁺. Particularly, the separation of enzymatic digestion and fluorescence monitoring endued a robust and highly responsive detection of UO₂²⁺ upon the temperature of enzymatic digestion process ranged from 18° to 41 °C. Consequently, G4DNAzyme assay allowed a robust, label-free and ratiometric quantification of uranium. We demonstrated the feasibility of G4DNAzyme assay for estimating uranium pollution in water and aquatic product samples. Ultimately, G4DNAzyme assay was adopted to serve as the platform to screen bacterial species and conditions for uranium biosorption, promising its roles in uranium associated biosafety control.

A conjugated fluorescent polymer sensor with amidoxime and polyfluorene entities for effective detection of uranyl ion in real samples

It is an important challenge to develop a chemosensor for trace uranyl ion in an aqueous medium for sustainable development of nuclear energy and environmental conservation. A conjugated fluorescent polymer sensor P2 based on amidoxime groups and polyfluorene, which showed good hydrophilous resulting adequate contact with uranyl ions and selectivity and sensitivity even in the presence of other metal ions in DMA/H₂O (v/v = 20:80, pH = 6.0) solution, for uranyl ion was designed and prepared in this work. And it possesses good thermal stability and a larger Stokes shift (108 nm). Importantly, the fluorescence quenching occurred when P2 combining uranium. It had a good linear relationship with UO₂²⁺ concentration in the range of 10 to 200 nM with a fairly low LOD 7.4 × 10^-9 M. Interaction properties between the sensor P2 and UO₂²⁺ and the fluorescent mechanism were investigated by density functional theory (DFT). More importantly, the sensor can be successfully used for the detection of uranyl ion in environmental solutions. This work suggests that conjugated fluorescent polymer with amidoxime groups will be a prospective sensor of uranyl ion in the environmental sample.

Sensitive and selective assay of uranyl based on the aggregation induced fluorescent quenching of protamine capped gold nanoclusters

The protamine capped gold nanoclusters (AuNCs@PRT) were synthesized by an one-pot approach, and utilized as a nanoprobe for highly sensitive and selective assay of U(VI) ions. The method is based on the aggregation induced fluorescent quenching of AuNCs@PRT by U(VI) ions. Under optimum conditions, the decrease of fluorescence intensity displayed a good linear correlation with the concentration of U(VI) ions ranging from 20.4 nM to 9.74 μM, with a detection limit of 6.1 nM. The relative standard deviations were 3.86%, 1.41% and 1.71% via 11 detections at concentrations of 40 nM, 0.40 μM and 4.0 μM of U(VI), respectively. The quenching mechanism was demonstrated to be due to the binding of U(VI) towards PRT to cause the aggregation of AuNCs@PRT rather than metal-metal interaction. The results suggest the potential application of this approach for monitoring the level of U(VI) in environmental samples.

Terpyridine-based complex nanofibers with Eu3+ as a highly selective chemical probes for UO22

Uranyl is a radioactive, toxic pollutant commonly found in the waste remaining after nuclear fuel reprocessing, and it poses several types of risks to human health; therefore, developing absorbents and chemical probes for this compound is crucial to overcoming these issues. This study examined the sensing abilities of terpyridine-appended benzenetricarboxyamide (T-BTA) as a chromogenic probe for detecting uranyl ions (UO₂²⁺). The complex with Eu³⁺ (1-Eu) spontaneously formed nanostructured fibers in H₂O owing to the triamide groups of T-BTA, which induced intermolecular hydrogen-bonding interactions. The strong blue emission of these nanofibers in H₂O was quenched upon adding UO₂²⁺ but not upon adding any other metal ion. This high selectivity was probably because of the interactions between the nitrigen atoms of the terpyridine moieties of 1 and UO₂²⁺. Furthermore, the 1-Eu nanofibers assumed spherical morphologies when UO₂²⁺ was added. To develop a convenient UO₂²⁺ sensor, an electrospun film incorporating 1-Eu (ESF-1-Eu) was manufactured, and it exhibited high selectivity for UO₂²⁺ over a variety of rival metal ions. The plot for luminescence change of ESF-1-Eu vs UO₂²⁺ concentrations in seawater samples showed a good linearty. Thus, the ESF-1-Eu shows potential as a useful sensor for detecting and removing UO₂²⁺ in H₂O.

A review on nanomaterial-based electrochemical, optical, photoacoustic and magnetoelastic methods for determination of uranyl cation

This review (with 177 refs) gives an overview on nanomaterial-based methods for the determination of uranyl ion (UO₂²⁺) by different types of transducers. Following an introduction into the field, a first large section covers the fundamentals of selective recognition of uranyl ion by receptors such as antibodies, aptamers, DNAzymes, peptides, microorganisms, organic ionophores (such as salophens, catechols, phenanthrolines, annulenes, benzo-substituted macrocyclic diamides, organophosphorus receptors, calixarenes, crown ethers, cryptands and β-diketones), by ion imprinted polymers, and by functionalized nanomaterials. A second large section covers the various kinds of nanomaterials (NMs) used, specifically on NMs for electrochemical signal amplification, on NMs acting as signal tags or carriers for signal tags, on fluorescent NMs, on NMs for colorimetric assays, on light scattering NMs, on NMs for surface enhanced Raman scattering (SERS)-based assays and wireless magnetoelastic detection systems. We then discuss detection strategies, with subsections on electrochemical methods (including ion-selective and potentiometric systems, voltammetric systems and impedimetric systems). Further sections treat colorimetric, fluorometric, resonance light scattering-based, SERS-based and photoacoustic methods, and wireless magnetoelastic detection. The current state of the art is summarized, and current challenges are discussed at the end. Graphical abstract An overview is given on nanomaterial-based methods for the detection of uranyl ion by different types of transducers (such as electrochemical, optical, photoacoustic, magnetoelastic, etc) along with a critical discussion of their limitations, benefits and application to real samples.

Spectrographic sensors for uranyl detection in the environment

More and more severe energy problem triggers extensive application of nuclear energy, and the adverse effects brought by nuclear materials such as uranyl to the environment are becoming the concern, as it has become a threat to human's health. Therefore, the detection of uranyl is increasingly important, which aims to make the application of uranium under surveillance and protection. A lot of detection methods employing varying materials based on different techniques for uranyl have been proposed including those using expensive and complicated instruments such as ICP-MS, ESI-MS, and neutron activation analysis etc. Those methods based on expensive instruments often provide quite low limit of detection (LOD) and excellent validity and repeatability, however, methods that are low-cost, convenient and rapid are in demand because these are satisfied characters for on-site and in-time determination. In the review, we discuss uranyl sensors based on spectrographic techniques, which is facile and promising for rapid assessment of uranium content in practical application. Spectrographic techniques including fluorescence, UV-vis spectrophotometry, resonance light scattering (RLS) and surface enhanced Raman scattering (SERS) are evaluated. In detail, the core materials that playing extremely important roles in detection performance are stated consisting of small molecule, biomolecule, polymer and nanomaterial.

Fluorimetric detection of Sn(2+) ion in aqueous medium using Salicylaldehyde based nanoparticles and application to natural samples analysis

The fluorescent 2-[(E)-(2-phenylhydrazinylidene)methyl]phenol nanoparticles (PHPNPs) were prepared by a simple reprecipitation method. The prepared PHPNPs examined by Dynamic Light Scattering show narrower particle size distribution having an average particle size of 93.3nm. The Scanning Electron Microphotograph shows distinct spherical shaped morphology of nanoparticles. The blue shift in UV-absorption and fluorescence spectra of PHPNPs with respect to corresponding spectra of PHP in acetone solution indicates H- aggregates and Aggregation Induced Enhanced Emission (AIEE) for nanoparticles. The nanoparticles show selective tendency towards the recognition of Sn(2+) ions by enhancing the fluorescence intensity preference to Cu(2+), Fe(3+), Fe(2+), Ni(2+), NH4(+), Ca(2+), Pb(2+), Hg(2+) and Zn(2+) ions, which actually seem to quench the fluorescence of nanoparticles. The studies on Langmuir adsorption plot, fluorescence lifetime of PHPNPs, DLS-Zeta sizer, UV-visible and fluorescence titration with and without Sn(2+) helped to propose a suitable mechanism of fluorescence enhancement of nanoparticles by Sn(2+) and their binding ability during complexation. The fluorescence enhancement effect of PHPNPs induced by Sn(2+) is further used to develop an analytical method for detection of Sn(2+) from aqueous medium in environmental samples.

Aggregation-induced emission active tetraphenylethene-based sensor for uranyl ion detection

A novel tetraphenylethene-based fluorescent sensor, TPE-T, was developed for the detection of uranyl ions. The selective binding of TPE-T to uranyl ions resulted in a detectable signal owing to the quenching of its aggregation-induced emission. The developed sensor could be used to visually distinguish UO2(2+) from lanthanides, transition metals, and alkali metals under UV light; the presence of other metal ions did not interfere with the detection of uranyl ions. In addition, TPE-T was successfully used for the detection of uranyl ions in river water, illustrating its potential applications in environmental systems.

Exonuclease III-assisted substrate fragment recycling amplification strategy for ultrasensitive detection of uranyl by a multipurpose DNAzyme

Substrate fragment cleaved by UO₂²⁺ hybridizes with SSP6 to form dsDNA, triggering substrate fragment recycling amplification by Exo III.

Highly selective and sensitive fluorescence optode membrane for uranyl ion based on 5-(9-anthracenylmethyl)-5-aza-2,8-dithia[9],(2,9)-1,10-phenanthrolinophane

A highly sensitive and selective fluorimetric optode membrane based on the enhancement in fluorescence emission of 5-(9-anthracenylmethyl)-5-aza-2,8-dithia[9],(2,9)-1,10-phenanthrolinophane (L) for subnanomolar detection of uranyl ion is presented.

A fluorescent probe for hypochlorite based on the modulation of the unique rotation of the N–N single bond in acetohydrazide

A fluorescent probe for hypochlorite was developed based on a novel signaling mechanism of modulating the N–N bond rotation in acetohydrazide.