Direct electron transfer of glucose oxidase and dual hydrogen peroxide and glucose detection based on water-dispersible carbon nanotubes derivative

Development of Redox-Active Lyotropic Lipid Cubic Phases for Biosensing Platforms

Enzyme-based electrochemical biosensors play an important role in point-of-care diagnostics for personalized medicine. For such devices, lipid cubic phases (LCP) represent an attractive method to immobilize enzymes onto conductive surfaces with no need for chemical linking. However, research has been held back by the lack of effective strategies to stably co-immobilize enzymes with a redox shuttle that enhances the electrical connection between the enzyme redox center and the electrode. In this study, we show that a monoolein (MO) LCP system doped with an amphiphilic redox mediator (ferrocenylmethyl)dodecyldimethylammonium bromide (Fc12) can be used for enzyme immobilization to generate an effective biosensing platform. Small-angle X-ray scattering (SAXS) showed that MO LCP can incorporate Fc12 while maintaining the Pn3m symmetry morphology. Cyclic voltammograms of Fc12/MO showed quasi-reversible behavior, which implied that Fc12 was able to freely diffuse in the lipid membrane of LCP with a diffusion coefficient of 1.9 ± 0.2 × 10-8 cm2 s-1 at room temperature. Glucose oxidase (GOx) was then chosen as a model enzyme and incorporated into 0.2%Fc12/MO to evaluate the activity of the platform. GOx hosted in 0.2%Fc12/MO followed Michaelis-Menten kinetics toward glucose with a KM and Imax of 8.9 ± 0.5 mM and 1.4 ± 0.2 μA, respectively, and a linearity range of 2-17 mM glucose. Our results therefore demonstrate that GOx immobilized onto 0.2% Fc12/MO is a suitable platform for the electrochemical detection of glucose.

Potentiality of Nanoenzymes for Cancer Treatment and Other Diseases: Current Status and Future Challenges

Studies from past years have observed various enzymes that are artificial, which are issued to mimic naturally occurring enzymes based on their function and structure. The nanozymes possess nanomaterials that resemble natural enzymes and are considered an innovative class. This innovative class has achieved a brilliant response from various developments and researchers owing to this unique property. In this regard, numerous nanomaterials are inspected as natural enzyme mimics for multiple types of applications, such as imaging, water treatment, therapeutics, and sensing. Nanozymes have nanomaterial properties occurring with an inheritance that provides a single substitute and multiple platforms. Nanozymes can be controlled remotely via stimuli including heat, light, magnetic field, and ultrasound. Collectively, these all can be used to increase the therapeutic as well as diagnostic efficacies. These nanozymes have major biomedical applications including cancer therapy and diagnosis, medical diagnostics, and bio sensing. We summarized and emphasized the latest progress of nanozymes, including their biomedical mechanisms and applications involving synergistic and remote control nanozymes. Finally, we cover the challenges and limitations of further improving therapeutic applications and provide a future direction for using engineered nanozymes with enhanced biomedical and diagnostic applications.

Glucose Biosensor Based on Glucose Oxidase-Horseradish Peroxidase/Multiporous Tin Oxide (SnO₂) Modified Electrode

The fabrication of a network of glucose oxidase-horseradish peroxidase/tin oxide (GOx-HRP/SnO₂), immobilized onto a glassy carbon electrode (GCE) and its utilization as a biosensor for glucose detection is reported. The network established with GOx-HRP/SnO₂ possess high sensitivity and stability by performing the electrocatalytic features in the sensing of glucose. The turbidity of fabrication had been scanned and analyzed using UV-vis spectroscopy. The morphology and composition of the fabricated GOx-HRP/SnO₂ networks were characterized by scanning electron microscopy (SEM). Cyclic voltammetry and amperometry were employed to study the electrochemical properties of the proposed biosensor. The effect of applied electrode potential and pH were systemically investigated. The biosensor responds to glucose at work potential values between -400 mV, and exhibited a lower detection limit (0.025 mM) and long linear range (0.25 to 7.0 mM), and was resistant to common interferences.

Nanozymes for medical biotechnology and its potential applications in biosensing and nanotherapeutics

Recent past years have witnessed the development of several artificial enzymes, using different materials to mimic natural enzymes with respect to their structure and functions. The nanozymes are nanomaterials possessing similar characteristics to the natural enzymes and have emerged recently as an innovative class of artificial enzymes. The nanozymes have got remarkable attention from the researchers and notable developments have been achieved owing to their unique properties compared with natural enzymes and classic artificial enzymes. In this regard, several nanomaterials have been scrutinized so far to mimic different natural enzymes for wider applications ranging from imaging, sensing, water treatment, pollutant removal, and therapeutics. The applications of nanozymes in biomedicine research are fast-growing and various nanozymes have been implicated in diagnostic medicine, targeted cancer therapy. Such abilities make them an appropriate alternative for the development of affordable, sustainable and safe diagnostic as well as therapeutic agents.

Reduced graphene oxide doping with nanometer-sized ferrocene moieties - New active material for glucose redox sensors

Herein, we present that the reduced graphene oxide (rGO) doped with nanometer-sized ferrocene moieties is a new, excellent active material for redox sensors. Two distinct approaches were utilized for the modification of rGO. The first method was based on the covalent decoration of rGO via the addition of azomethine ylide generated from the ferrocenecarboxaldehyde oxime. The second approach utilized the adsorption of 1,1'-ferrocenedicarboxylic acid on the graphene sheet via the π-π stacking. The morphology of the synthesized graphene materials was studied by application of microscopic techniques, whereas the Raman data allowed the characteristics of the tested materials in terms of their structural properties. The tested graphene materials doped with ferrocene moieties were used as a bioactive platform for glucose oxidase (GOx) immobilization. The enzyme was immobilized onto the rGO materials in two ways: (i) using a crosslinking agent - glutaraldehyde (GA) and (ii) by formation of the amide bonds between carboxylic groups of rGO-Fc(COOH)₂ and amine groups from enzyme. Ferrocene moieties present at the graphene surface play the role of mediator in the electron transfer between the redox center of GOx and the electrode surface. The functionality of the constructed biosensors has been tested on real samples. The results of the recovery rates showed a satisfying degree of accuracy toward determination of glucose concentration. Examination of the potential interfering species has demonstrated favorable sensitivity and selectivity of the designed biosensor for the detection of glucose.

New Titanium Dioxide-Based Heterojunction Nanohybrid for Highly Selective Photoelectrochemical-Electrochemical Dual-Mode Sensors

A new titanium dioxide (TiO₂)-based heterojunction nanohybrid (HJNH) composed of TiO₂, graphene (G), poly[3-aminophenylboronic acid] (PAPBA), and gold nanoparticles (Au NPs) was synthesized and designated as TiO₂(G) NW@PAPBA-Au HJNH. The TiO₂(G) NW@PAPBA-Au HJNH possesses dual-mode signal photoelectrochemical (PEC) and electrochemical transduction capabilities to sense glucose and glycated hemoglobin (HbA1c) independently. The synthesis of the HJNH material involved two sequential stages: (i) simple electrospinning synthesis of G-embedded TiO₂ nanowires [TiO₂(G) NWs] and (ii) one-step synthesis of Au NP-dispersed PAPBA nanocomposite (NC) in the presence of TiO₂(G) NWs. The as-synthesized TiO₂(G) NW@PAPBA-Au HJNH was characterized by field emission scanning electron microscopy, field emission transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared, thermogravimetric analysis, and UV-visible diffuse reflectance spectroscopy. A PEC platform was developed with TiO₂(G) NW@PAPBA-Au HJNH for the selective detection of glucose without any enzyme auxiliary. The PEC glucose sensor presents an acceptable linear range (from 0.5 to 28 mM), good sensitivity (549.58 μA mM^-1 cm^-2), and low detection limit (0.11 mM), which are suited for diabetes glucose monitoring. Besides, the boronic acid groups in PAPBA were utilized as a host to capture HbA1c. We fabricated the electrochemical HbA1c sensor based on monitoring the electrocatalytic reduction current of hydrogen peroxide produced by HbA1c tethered to the sensor probe. The amperometric electrochemical sensor for HbA1c exhibited linear responses to HbA1c levels from 2.0 to 10% (with a detection limit of 0.17%). Notably, the performances of the fabricated glucose and HbA1c sensors are superior in the dual-signal transduction modes as compared to the literature, suggesting the significance of the newly designed bifunctional TiO₂(G) NW@PAPBA-Au HJNH.

Smart Nanocomposites of Cu-Hemin Metal-Organic Frameworks for Electrochemical Glucose Biosensing

Herein, a smart porous material, Cu-hemin metal-organic-frameworks (Cu-hemin MOFs), was synthesized via assembling of Cu²⁺ with hemin to load glucose oxidase (GOD) for electrochemical glucose biosensing for the first time. The formation of the Cu-hemin MOFs was verified by scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, N₂ adsorption/desorption isotherms, UV-vis absorption spectroscopy, fluorescence spectroscopy, thermal analysis and electrochemical techniques. The results indicated that the Cu-hemin MOFs showed a ball-flower-like hollow cage structure with a large specific surface area and a large number of mesopores. A large number of GOD molecules could be successfully loaded in the pores of Cu-hemin MOFs to keep their bioactivity just like in a solution. The GOD/Cu-hemin MOFs exhibited both good performance toward oxygen reduction reaction via Cu-hemin MOFs and catalytic oxidation of glucose via GOD, superior to other GOD/MOFs and GOD/nanomaterials. Accordingly, the performance of GOD/Cu-hemin MOFs-based electrochemical glucose sensor was enhanced greatly, showing a wide linear range from 9.10 μM to 36.0 mM and a low detection limit of 2.73 μM. Moreover, the sensor showed satisfactory results in detection of glucose in human serum. This work provides a practical design of new electrochemical sensing platform based on MOFs and biomolecules.