Photovoltammetric behavior and photoelectrochemical determination of p-phenylenediamine on CdS quantum dots and graphene hybrid film

Ratiometric electrochemical sensing platform based on N-doped MOF-derived CoNi/C for the determination of p-phenylenediamine in hair dyes

A stable ratiometric electrochemical sensing platform is introduced for the determination of p-phenylenediamine (PPD). Specifically, the proposed sensing platform employs nitrogen-doped MOF pyrolysis-derived CoNi/C (N-CoNi/C) which was deployed as the sensing agent and methylene blue (MB) as the internal reference, and the MB combined with N-CoNi/C nanomaterials by a simple immersion adsorption process. Full characterization of N-CoNi/C was carried out with respect to morphology, composition, and electrochemical behavior, and the sensing performance of the ratiometric electrochemical sensing platform was evaluated. Complete separation of the oxidation peaks of PPD and MB was achieved using the MB/N-CoNi/C composite modified glassy carbon electrode (MB/N-CoNi/C/GCE) and their ratio signals were used for quantitative determination of PPD. The electrical signal was linearly related to the concentration of PPD in the concentration range 0.3-100 μM, with a fitted correlation coefficient of 0.9987 and a detection limit of 0.091 μM (S/N = 3). Additionally, the sensor has been successfully used for the determination of PPD in commercial hair dyes with a recovery rate of over 95%.

Sensitive and visual detection of p-phenylenediamine by using dialdehyde cellulose membrane as a solid matrix

A novel method was developed for the sensitive and visual detection of p-phenylenediamine (PPD) via immobilizing the target specie PPD on dialdehyde cellulose membrane (DCM) followed by the reaction with salicylaldehyde. The obtained solid fluorescent membrane (S-PPD-DCM) emitted yellow fluorescence under 365 nm UV light. DCM was not only used as a solid matrix but also played a vital role in the enrichment of PPD. Experimental variables influencing the fluorescence signal were investigated and optimized. Under the optimum conditions, a detection limit of 5.35 μg L^-1 was obtained and two linear ranges were observed at 10-100 and 100-1000 μg L^-1, respectively. Moreover, the fluorescence of the resultant membrane can still be visualized by naked eye when PPD concentration was 50 μg L^-1. The detection of PPD was hardly affected by the coexistence of 1 mg L^-1 of o-phenylenediamine, m-phenylenediamine or phenylamine, exhibiting good selectivity. The developed method involved in a two-step Schiff base reaction and enhanced the fluorescence emission via blocking nonradiative intramolecular rotation decay of the excited molecules. It was applied to determine the PPD in spiked hair dye with satisfactory results.

A highly sensitive perovskite oxide sensor for detection of p-phenylenediamine in hair dyes

Effective regulation of p-phenylenediamine (PPD), a widely used precursor of hair dye that is harmful to human health in large concentration, relies upon an accurate yet simple detection of PPD. In this context, amperometric electrode sensor based on perovskite oxide becomes attractive given its portability, low cost, high sensitivity, and rapid processing time. This work reports the systematic characterization of a series of Sr-doped PrCoO_3-δ perovskite oxides with composition of Pr_1-xSr_xCoO_3-δ(x = 0, 0.2, 0.4, 0.6, 0.8, and 1) for PPD detection in an alkaline solution. PSC82 deposited onto glassy carbon electrode (PSC82/GCE) generates the highest redox currents which correlates with the highest hydrogen peroxide intermediates (HO₂^-) yield and the σ*-orbital (e_g) filling of Co that is closest to unity for PSC82. PSC82/GCE provides the highest sensitivities of 655 and 308 μA mM^-1 cm^-2 in PPD concentration range of 0.5-2,900 and 2,900-10,400 μM, respectively, with a limit of detection of 0.17 μM. PSC82/GCE additionally demonstrates high selectivity to PPD and long term stability during 50 consecutive cyclic voltammetry scans and over 1-month storage period. The potential applicability of PSC82/GCE was also demonstrated by confirming the presence of very low concentration of PPD of below 0.5% in real hair dyes.

Cathodic "signal-on" photoelectrochemical aptasensor for chloramphenicol detection using hierarchical porous flower-like Bi-BiOI@C composite

A novel p-type semiconductor-based cathodic "signal-on" photoelectrochemical (PEC) aptasensor was proposed for highly sensitive and selective detection of chloramphenicol (CAP). The photocathode was fabricated with hierarchical porous flower-like Bi-BiOI@C composite synthesized via a one-pot solvothermal method using glucose as both green reductant and carbon precursor. Due to the surface plasmon resonance (SPR) effect of Bi and high-conductivity of carbon, the composite exhibited an enhanced cathodic photocurrent as compared with pure BiOI or Bi-BiOI. When CAP-binding aptamer was immobilized as recognition element on Bi-BiOI@C modified electrode, a cathodic PEC aptasensor showing specific "signal-on" response to CAP was constructed. Some influencing factors such as coating amount of Bi-BiOI@C suspension, applied bias potential, and aptamer concentration were studied. Under the optimum conditions, the cathodic photocurrent of the constructed PEC aptasensor increased linearly with CAP concentration from 2 to 250 nM, with a detection limit (3S/N) of 0.79 nΜ. The proposed sensor was successfully applied to the determination of CAP in pharmaceutical tablet, eye drop and lake water samples.

Polymeric Ionic Liquid-Based Fluorescent Amphiphilic Block Copolymer Micelle for Selective and Sensitive Detection of p-Phenylenediamine

A highly sensitive and selective detection of p-phenylenediamine (PPD) is achieved by a fluorescence sensor, which is constructed by encapsulating the hydrophobic fluorescent 1-pyrenecarboxaldehyde (Py-CHO) into a polymeric ionic liquid (PIL)-based amphiphilic block copolymer (BCP) micelle. The amine-aldehyde condensation reaction between PPD and Py-CHO leads to the fluorescence quenching of Py-CHO, giving rise to the basis for the quantitative detection of PPD. The core cavity of the micelle formed by the self-assembly of PIL provides an excellent hydrophobic environment for the accommodation of fluorescent Py-CHO, offering significant improved sensitivity and selectivity for PPD detection. The amount of PIL in fabricating the amphiphilic BCP micelle, the BCP-Py-CHO micelle concentration, and the detection pH condition are investigated to obtain the best performance of this sensor. The accurate detection of PPD is achieved in the range of 0.02-10 μmol L^-1 under optimal conditions, and the detection limit is 0.007 μmol L^-1 (3σ/ s). The developed sensor is successfully applied to the determination of PPD contents in hair dyes, spiked water, and urine samples.

A review on visible-light induced photoelectrochemical sensors based on CdS nanoparticles

Discovering the distinctive photophysical properties of semiconductor nanoparticles (NPs) has made these a popular subject in recent advances in nanotechnology-related analytical methods.

Quantum-dots-based photoelectrochemical bioanalysis highlighted with recent examples

Photoelectrochemical (PEC) bioanalysis is a newly developed methodology that provides an exquisite route for innovative biomolecular detection. Quantum dots (QDs) are semiconductor nanocrystals with unique photophysical properties that have attracted tremendous attentions among the analytical community. QDs-based PEC bioanalysis comprises an important research hotspot in the field of PEC bioanalysis due to its combined advantages and potentials. Currently, it has ignited increasing interests as demonstrated by increased research papers. This review aims to cover the most recent advances in this field. With the discussion of recent examples of QDs-PEC bioanalysis from the literatures, special emphasis will be placed on work reporting on fundamental advances in the signaling strategies of QDs-based PEC bioanalysis from 2013 to now. Future prospects in this field are also discussed.

Recent progress in the preparation and application of quantum dots/graphene composite materials

Quantum dots/graphene (QDs/GR) composite materials show a distinct synergistic effect between the QDs and graphene, which has aroused vast attention toward their unique characteristics in the last few decades.

Recent advances in the use of quantum dots for photoelectrochemical bioanalysis

Photoelectrochemical (PEC) bioanalysis is a newly developed technique for innovative biomolecular detection. Quantum dots (QDs) with unique photophysical properties are key components in realization of various exquisite PEC bioanalyses. Particularly, significant progress has been made in the QD-based PEC bioanalysis. In this work, we briefly summarize the most recent and important developments in the use of traditional and newly emerging QDs for novel PEC bioanalytical applications. The future prospects in this dynamic field are also highlighted.

Facilely prepared Fe3O4/nitrogen-doped graphene quantum dot hybrids as a robust nonenzymatic catalyst for visual discrimination of phenylenediamine isomers

In this work, we report a reducing agent-free strategy for the synthesis of Fe3O4 nanoparticle/nitrogen-doped graphene quantum dot (Fe3O4/N-GQD) hybrids, and constructed a sensing platform based on Fe3O4/N-GQDs for the visual discrimination of phenylenediamine isomers. Fe3O4/N-GQDs were facilely prepared by hydrothermal treatment of Fe(3+)/N-GQD solutions under alkaline conditions without other reagents. The prepared Fe3O4/N-GQDs exhibited outstanding peroxidase-like activity and were stable under a wide range of pH values and temperatures. The phenylenediamine isomers (o-phenylenediamine, m-phenylenediamine, and p-phenylenediamine) were discriminated through the H2O2-mediated oxidation reaction using Fe3O4/N-GQDs as novel peroxidase mimics, which resulted in appreciable color changes. The proposed method is simple, economical, and effective for discrimination of isomers, and can be used for sensitive and selective quantitative analysis of o-phenylenediamine and p-phenylenediamine. A good linear relationship from 1 to 90 μM and a detection limit of 230 nM for o-phenylenediamine were achieved, and the linear relationship for p-phenylenediamine was from 2 to 70 μM with a detection limit of 530 nM. The proposed method may open new applications of Fe3O4/N-GQDs in biomedicine and environmental chemistry.